Touchscreen and the noise of the fan U920T - 11 c satellite fails sometimes

Similar Questions

• Process creates the CPU to overheat and the Fans to run like crazy:

  I am ripping DVDs on different Macbook cradle fully aware that it's requiring treatment.

  The 2011 with 16 GB of ram and hard disk SSD, the process runs on 330% of the processor, blasting the ability and heat

  revolves around 100 c/213 F.

  Interesting enough the same process on 2 late Mo Pro 2008 with less ram do not overheat in the extraction process. The program are identical on all the Pros of 3 MB. The processes are the same, but on the old MBpros the processor load is between 130-150% up to more heating is not that great a problem.

  But the MBPro of 2011 with top material tearing overheating of the processor and fans running at full speed.

  I noticed that too much work with other programs or is running only a few programs at the same time seem to heat from the processor and the fans make some noise + cpu run hot with my MBpro 2011 and El Capitan.

  It is possible to restrict a program that use a large part of the resources to avoid overheating?

  Other solutions?

  Well a Late 2008 Macbook Pro has a intel core 2 duo, so the max he could run is 200% (2 CPUs time 100%) if the application can do enough on 2 processors in parallel.

  Your 2011 Macbook Pro has very probably a 4 core CPU intel i7 with hyper-threading.  If an application can use hyper-fils, there is a potential of 800% max.  The 330% could just be that the DVD cannot keep up with the CPU, so it does not hit its maximum potential because of the famine of data.

  I don't know if the speed of the DVD drive in 2008 was the same as the 2011.  If the 2011 is able to read data more quickly than the 2008, then it can provide given the CPU faster, keep the much busier CPU so it can consume more power, and more power consumption more than the heat generated.

  MacBook pro 2011 ends a DVD in less time than the 2008?

  Basically, you are trying to compare 'Granny Smith' vs 'Golden Delicious' apples and expects the same taste.

  Regarding the other programs, put this SSD in your Macbook Pro means that any code or data that the application needs to get the disc are convinced order or magnitude faster, so that the application did not slow the CPU and keep crank, causing the CPU to keep them busy and thus attract more power, which is converted into heat causing fans to run.

  It is also possible that your SSD generates more heat.  Solid State does not always mean longer running costs.  Much would depend on the brand and the model of the SSD and it is the power profile, and it draws more power for writing vs readings, and how much nature more expensive power you're done.

  Information point.  I put an SSD in my 2009 27 "iMac and it works more hot because my iMac can do more in less time.  I put an SSD in my Macbook Pro 2011 and if I ask him to do a lot of work, like backups, it starts its fans, as the SSD is always quick to provide data for backup, there is no waiting for the discs, leaving the lower idle CPU.

• G7-2017us Pavilion: laptop computer is hot and the fan is noisy

  I have windows 7. 64 bit. I noticed that the laptop gets very hot and the fan makes noise. Try to solve this problem I went the HPSA. It shows that I have no update necessary; However when I go to the HP site and I ask him to identify my system it shows a lot of updates pending. This is why I need help with 2 questions, one the heat generated and the second on the updates. I also checked, and it shows that I have the latest version of the Support Assistant. The updates are all from 2016 and 2 refer to the BIOS.

  I'm not well informed on the issues, any help will be appreciated

  The update of the BIOS F.26 is important because of security concerns. The change log States:

  'Provides security improved for UEFI EDK2

  HP strongly recommends transition immediately to this BIOS update. »

  It will not hurt to delete the sp66805 folder. I suggested it because it confuses you with the process of downloading/installation asking you to replace it.

  You could try to change of name, it will probably work.

• Mac does not start and the fans going crazy

  Computer does not start and the fans work hard and fast. Someone has an idea what is the problem and how can I solve this problem?

  OLA I will try help EU tenho um macbook pro, mas esse problema não me it happened ainda EU acho seria o seu mac origem help esse problema pode formatar better.

  SE nao tem'm ligar o seu osx para formatar use cmd + r e ligar pressionar cmd + r ele deve AI PODES ligar restore o seu novo osx.

• Satellite Pro S500 - 11 c is suspended and the fan runs at full

  Hi people,

  I am experiancing a problem with my Satellite Pro S500 - 11 c where close unexpectedly, it crashes and the fan runs at full speed. Discount to zero is my only option and this resulted in the windows having to retrieve a few times so I'm fearing one requiring a major reconstruction after a deadlock of the future. Until now this issue has occurred only when you use a wireless USB mobile of 3G or internet teathering via USB with my iphone 3G. Using another USB port did not help.

  If someone has encountered this problem and have a fix? No help from Toshiba?

  Best regards

  Andrew

  Hmmmm... What to say. Problem is that you use third party hardware and software and some conflicts are possible. The question is: who can help you with this?
  In general you should talk to your ISP provider at first to see what they will say about all this.

  Have you ever talked with them?

• M400 screen/computer crashes and the fan is palpable... reboot is the only option

  Randomly my [Toshiba Portege M400-S5032 | http://reviews.cnet.com/laptops/toshiba-portege-m400-s5032/4505-3121_7-32329282.html] crashes and the fan starts running fast. [Cnt-Alt-Del does not work and the only way out is pressed the power button until there is a shut down | http://forum.notebookreview.com/toshiba/224709-toshiba-u205-lock-up-problem.html#post3454972]. Increases the frequency of this problem as the age of the laptop. I opened the computer to make sure that there is no dust or debris inside and I [removed the stickers from the bottom of the laptop | http://cxliv.org/2008/06/09/toshiba_u205-s5034_lock-up_problem.php] or less perforated holes in the stickers. [Other people have the same problem | http://reviews.cnet.com/laptops/toshiba-portege-m400/4864-3121_7-31729265-7.html?tag=userReviews;summaryList]. Some [think that Frost is caused by movement | http://www.fixya.com/support/t2758501-machine_freezes_up_needs_hard_boot], but [others think that it is only because software | http://laptopforums.toshiba.com/t5/General-Technology/Portege-M400-Problems/td-p/24729].

  * Does anyone have a solution? *

  Hello

  What version of BIOS your M400 installed?

  Test the RAM for problems using the Memtest CD of www.memtest.org

  And update the drivers (fingerprints, display, sound etc...).

• Portege M400 is frozen, screen goes black and the fan speed increases when moved

  Can someone help me please?

  I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
  Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
  So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

  Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?

• Envy 15 k005tx: laptop will not close properly... the va just black screen but the light is on and the fan also

  Laptop doesn't go out normally... va just black screen but the light is on and the fan is also on... so I have to stop it by pressing the power button... help plz...

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  Try to use the following method to see if you can install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

  code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

  [Moved from the community centre of Participation]

  Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

  Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

• Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

  Original title: MY PC has CRASHED or?  Windows XP - SP3

  Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

  Hello

  Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

• Windows vista screen remain black but the power and the fan runs

  I have a laptop of 5 years that I use for school. Normally, I have my laptop on the way 'sleep' but one day, that the display lights «» I press the power button to restart and it stops, however, when I turn it on, it will only show power and the fan runs. The screen remains black. Can someone help me, I need to access my documents from the school.

  Thank you
  c

  Hello

  Video card problems are the most common cause of this problem.

  Method 1:
  Reinstall your video driver a. right click on the taskbar and then click Start Task Manager.
  b. click on the processes tab, click explorer.exe and then click on end process.
  c. click file and then click New task (run).
  (d) in the text box to open, type explorer.exe, and then click OK.
  e. click the Start button, type device manager in the start search box, and then, in the search results.
  Click on Device Manager.
  f. double click on display adapters, right click the display device, click Update driver software and then follow the steps in the wizard that appears.

  Method 2:

  Start the computer in safe mode and run system restore

  a. click the Start button, click the arrow next to Shut Down and then click on restart.
  b. do one of the following:

  • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.
  d. connect to your computer with an account of a user who has administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.
  e. click the Start button, type "System Restore" in the search box, click System Restore, and then click Next.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  f. choose a restore point when your PC worked as expected, click Next and then click Finish.
  g. restart your computer normally.

  Keep us updated on the status of the issue.

• do not sleep when I close the lid of the computer. Everytime I open the lid there is message that computer prepares to lock, then go to the login page. Computer gets too hot and the fan runs constantly

  I have Dell laptop with vista .lately my computer stop to sleep when I close read although the power option have been that he sleeps when the cover is closed. Everytime I open the lid it is message that ' the computer prepares lock ' and in a few seconds, it goes back to the login page. during computer work becomes too hot and the fan runs constantly even if I close the lid.

  Hello

  Follow these steps:

  
  Step 1: I suggest you to download the latest drivers for the graphics card and install it on the system and check. See the article mentioned below.

  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  Step 2: disable the Option "Allow this device to wake the computer" for a device

  a. open the control panel.
  b. click the Device Manager icon.
  c. click on continue in the UAC prompt.
  d. right-click on the network adapter and click Properties.
  e. click the power management tab.
  f. uncheck allow this device to wake the computer.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I downloaded Adobe photoshop cs 5, after download, it is not installing in my computer of OS - Windows 7 and the message is to give "Installer failed to initialize. File not found. Download Adobe support Advisor to check the problem

  I downloaded Adobe photoshop cs 5, for trial, after download, it is not installing in my computer of OS - Windows 7 and the message is to give "Installer failed to initialize. File not found. Download Adobe support Advisor to check the problem

  just uninstall cs5, clean a cleaning use of the CC tool to resolve installation problems. CC, CS3 - CS6 then install.

  Make sure your file is downloaded to your hard drive sizes are expected file sizes.  If you don't know how, ask someone to do it for you.

• Satellite Pro M10 overheating and the fan runs loud

  I have a Satellite Pro M10 and when it is the fan on the power grid comes shortly after the start and makes a horrible noise - this has only started happening recently. I tried spraying compressed air (dust) to the air outlet and still have the same problem.

  Other postings say to clean the fan, but I don't know how to access it. I'm worried about overheating problems I work in Africa much of the time and the laptop is subject to hot temperatures.

  Hi Hannah,

  The easy way to clear the dust and debris from the cooling system is to use a vacuum cleaner hose placed on the admission air grids that are usually in the bottom of the laptop (covered by a grid). For maximum effect, I usually place a rag around the pipe to maximize the flow of air through the fans.

  This causes air suction through the radiator CPU the wrong way and ensures that all debris are not pulled into the heatsink, but are removed by fans. You can see a ball of down under the grates that you need to try to clear little by little.

  This technique will not void your warranty since no disassembly of the unit is necessary.

  Kind regards

• Satellite Pro R850-15F - freezing randomly and the fan speeds up

  Hello

  I have a Toshiba Satellite Pro R850-15F who gave me four years in refurbished condition and so it is quite old.
  I have recently installed Windows 10 and things seemed to work very well.

  However, last week, I noticed that at least once a day my laptop freezes randomly and immediately the internal fan accelerates, becomes much stronger and a cold air. Whenever this happens, I turned off the laptop and turn it back on it.

  After that, it works normally again until the next time it freezes. I don't know anything about computer hardware, but I suspect that it is a problem of series and I wanted to get some advice in case my laptop is close to dying.

  If anyone has any help or advice or suggestions to solve the problem, then I would be extremely grateful if you would contact me.

  Hope to hear from someone soon,

  Flashback

  On this virtual path, it is not easy to say what the problem is here. To me, it looks like problem with some background process that as a result of extremely high CPU usage that locks the phone whole.
  High CPU usage means more heat in such situation the fan starts to run a lot faster.

  Have you noticed this behavior with a specific action or the use of certain applications?