touchscreen stops working. HID is stopped by the code 43 windows

Similar Questions

• igfxext module has stopped working message is displayed at the start of Windows 7. What is c?

  igfxext module has stopped working message is displayed at the start of Windows 7.  What is this and how can I fix?

  Hi Bob Bala.

  
  Thanks for asking this question to Microsoft Community!
  
  As I understand it you receive a startup message all to connect to the computer.

  He would be grateful if you can answer these questions to help you further.

  1. have you made changes on the computer before this problem?
  2. What is the brand and model of your computer?
  
  I would suggest trying the following methods and check if it helps.
  
  Method 1:
  
  You can try to check if the problem occurs in safe mode and check if it helps.
  
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  
  Method 2:
  
  If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.
  
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
  
  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.
   

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• How can I search for the code in the code editor window?

  I work a bit out of the code window to work on several symbols and a calendar at the same time. I have also to set and modify some variables and global functions. I'd like to be able to search the code, but I don't see a way to do it.

  It would be great if the code window had a lot of the same functionality as Adobe Edge CC highlighted Code, find and replace, AutoComplete, etc...

  Well, there is no ability to search at the moment but you can copy paste your code into something like notepad ++ and perform your search there and then copy / paste the result into Animate.

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• FPGA code will stop when the code RT

  I developed a FPGA code to manage a piece of hardware. It's the installer to read some default Panel control configuration values and then sit there constantly respond to signals input and output signal.  The bitfile FPGA is written in flash to load FPGA memory and starts almost immediately. So far, everything is good.

  Then I layered on the code of RT (cRIO-9075) system that opens a reference FPGA to the FPGA façade and allows me to follow a few indicators and change configuration settings and cause the configuration settings is changed be used by the FPGA.   So far, it seems to work too when I run the RT code interactively (eventually there will be an interface for a host system).

  The problem occurs when the code RT is ordered to stop. If you stop the RT code also, the judgment of the FPGA code and I will not stop the FPGA code. The RT code does not all calls to order the FPGA code to stop execution. When the RT code is stopped, the only thing she does in regards the link to the FPGA is to close the reference FPGA VI which was opened when the RT code was started.

  What should I do to cause the code FPGA to continue to operate as the RT code is started and stopped?

  I have to wait that I return to the office tomorrow to test this, but I think that this link has the answer to my problem.

  http://lavag.org/topic/16412-confusion-regarding-FPGA-Deployment/#entry100294

  It is said: "close FPGA VI reference. If you right click you have an option to close or by default close and reset. This means the VI FPGA is reset (read aborted in standard LV talking) when we close the reference. »

• CPU stops during the installation of windows xp

  Hello guys,.

  I have a problem. Recently, I tried to re install windows xp but has failed to do so because the installation process stops in midstages due to the cpu locking. But I am able to install windows 7, although anyway windows 7 I have installed is very slow. I can't understand what is happening. I tried to install windows xp over 5 - 6 times and the cpu always stops. And I love windows xp and donot want to lose. Please tell me some ideas so that I can have my xp back in order. Help, please.

  Hello

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you arefacing of the questions during the installation of Windows XP. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  He would be grateful if you answer the following questions:

  1. you are trying to do a new installation or reinstallation of Windows XP?

  2. you are trying to do an install dual boot?

  3. do you get an error message? If Yes, what is the full and exact error message?

  First of all, I would say disconnect you all external devices except the keyboard, mouse and screen and then follow these steps:

  Method 1:

  If you try to do a fresh install, I suggest you to refer to the article and check if it helps:

  How to install or upgrade to Windows XP

  If you try to do a re-install, refer to article:

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  Method 2:

  I suggest you to run the Microsoft Fix it for Windows to fix performance problems of system to slow down Windows computers.

  If the problem is not resolved, please respond with more details and we will be happy to help you.

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• any part of the microsoft security essenitals program still works from 07/2013 in the version of windows vista?

  I know that microsoft can't anti part of the virus in the version of windows vista.

  According to EPC is always available for Vista

  http://Windows.Microsoft.com/en-GB/Windows/Security-Essentials-all-versions

• I still have the Code FF Windows Update encountered an unknown error

  my cell phone has been reset to its factory definition it has vista Home premium, then I reinstalled the ultimate, now I'm getting errors on windows update with windows ultimate extra. Update of security for SQL server 2005 Service Pack 2 (KB960089) always fail. and I always get the message about the Installer patch fault and closed.

  Hi McKee,

  Thank you for visiting the Microsoft Windows Vista Answers site.

  I note that you are unable to install the Update for SQL server 2005 Service Pack 2 (KB960089) security.

  Please let us know if you have performed a clean install of Vista Ultimate or is it upgraded to Vista Home Premium.

  Please try to download the patch manually from the link below and install the same safe mode:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5dfb7998-0316-40E5-9fc5-7a1afc18e15e&displaylang=en

  If it still appears in the Windows updates, try the following steps and install updates:

  1 restart the computer in safe mode (to restart in mode safe keep pressing the F8 key during restart)

  2. click on the start menu and in start search box, type CMD

  3. in the list right click on CMD , and then click Run as administrator

  4. at the command prompt, type net stop cryptsvc of the

  5. rename the folder C:\ \System32\Catroot2 Windowsin Catroot2.old

  6 open the C:\ folder and then rename the folder C:\Windows\SoftwareDistribution as SoftwareDistribution.oldWindows

  7. at the command prompt, type net start cryptsvc of the

  8 restart the computer in normal mode

  9. run updates and check if you are able to get the updates without any error

  McKee, try to download the patch from the link below and install the same safe mode:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5dfb7998-0316-40E5-9fc5-7a1afc18e15e&displaylang=en

  Please let us know if the above is useful.

  Kind regards

  Srinivas
  Microsoft Answers Support Engineer

• the code of windows damaged

  I have a HP Pavilion that has windows code on the bottom of the foot of the computer.  It is damaged to the point of not being able to read all characters.  Is it possible to get the code from HP, so if I replace the hardrive which bombed positions I can reinstall Windows?  Thank you

  When you request support, please provide the HP model name and/or product the full number of the computer in question. Without this information, your question can be difficult, or impossible to answer.

  The quick and dirty answer is NO. Sorry, but HP nor Microsoft can help you with this problem or provide you with a different Windows product key.

  The key on the Windows certificate of authenticity is not necessary to activate your HP computer with a new hard drive installed, as long as you use your set HP recovery disc to return the computer to a factory State. If you create your personal series of HP recovery discs, you may be able to buy a set of HP or third-party provider ComputerSurgeons.com

  Please send Bravo

• Adding an event does not add the JavaScript code to the code automatically window

  I'm learning to animate Adobe classroom in a book (among others).  The lesson says to add an event to the timeline.  I click the icon "open stock" ({}) to the beginning of the row on the timeline for the item that I want to add an action.  The edit window appears.  I click on "mouseover", and only a comment is added to the window instead of the Javascript code.  I have to enter the code manually.  Animate is no longer does this in the code window actions?

  Note that the second stage ("choose a target") is required to automatically add the code.

  You must select an object, and then click Enter.

• CAgent32.exe stopped working and was closed at the start of windows.

  Original title: CAgent32.exe stopped working and was closed

  Whenever I start my computer a Windows tab will appear that reads CAgent32.exe stopped working and was closed? How can I fix it? Thank you

  Hello

  1. what happens when you try to uninstall or disable the program?

  2. you receive messages or error codes?

  3. have you made a recent software or hardware changes to the system?

  You can read the following article and try to run the Fixit and check if it helps.

  Diagnose and solve the program installation and uninstallation problems automatically

• How to stop all THE photos from windows photo gallery out when sending an email with a photo?

  Envoy what I thought was a photo of photo of photo gallery / scanned and it showed my ENTIRE photo library! How you stop that?

  It is in fact the import setting in windows live photos, which is to open the wlpg program when you import from any device, camera / scanner...

  Open wl photo gallery,

  Click on the blue button at the top left,

  Go to the registration options

  Import the section tab and check these settings.

  As to why he gives full access to all your files, you must be jumping the party permissions or not noticing.

  If you use outlook, you might think about changing your default Photo Editor / viewer of office picture manager so the issue is not returned.

  Go to default programs in the start menu,

  Click on associate a file type and Protocol in a program.

  Click on types of photo files you have, jpg / jpeg... and click on change, search for default, Office Picture Manager by clicking Close will record the changes you have made.

• Setting tab stops in the 8.1 Windows wordpad

  I just bought a new laptop. Theres so much changed since Windows XP. I now have Windows 8 and I cannot figure out how to set tab stops in wordpad. theres no button formatting. Can someone help me please?

  Thank you.

  Hi there, click paragraph, and then you will see the tabs button to set tab stops (for that paragraph, or for all of them, according to what has been highlighted / selected before you clicked on it).