TPT2 button / stop stuck

Similar Questions

• Portege R930 - button / stop stuck

  Hello

  The power button on my R930 has to stay down in its opening so that I can no longer use it to turn the computer off and (I just put my computer to sleep). I guess it can be a simple mechanical problem, but am currently in a place where I don't have access to any professional help. Suggestions/advice would be much appreciated.

  Thank you

  Looks like plastic or the switch is broken.
  A Toshiba Service Center can fix it.

• iMac G3 stuck power button / stop

  So, I bought a G3 iMac on eBay. It's a PowerMac 2.2 If you need this information.  A few months later, the power button is stuck in. So I have to keep hitting the power button to get it to turn on. And if I shake the computer, you can turn off. All solutions on how to get this button to be able to take off. The computer was probably not the best handle I see a few pieces chipped through the case and the door for the RAM has tape on it since there is nothing to hold the bottom.

  The initially supplied with your iMac keyboard has a power button.  If you use this keyboard, can you use this button to power instead?

• At startup, updates to Vista is stuck on "Full download 100% - do not turn off your computer". Cannot stop at least stop with button / stop.

  At startup, Vista update will start and get blocked msg on "Full download 100% - do not turn off your computer".  Last night on the left that it runs and it took 12.5 hours before finally coming out of the error status and asking for the password.  Could not stop downloading progress with Task Manager/ctrl-alt-del, etc., unless you use the power button / stop.   This severely limits the duration of use and if/when we are able to use it in an hour or two, it black screens and reboots restart fiasco together again.

  Hello Steve Gardener.

  Thanks for your post.  Try to start your computer in Safe Mode.  This allows the update to install without problem?  If so, start your computer in normal mode and a test for features.  Please let us know the results.

  See you soon

• Satellite M40 - 277 keeps restarting - button / stop?

  I have the problem that the (per hour to enter acient) laptop Satellite M40 277 of mine keeps restarting unpredictibally. Initially I have if it was a problem of overheating, so I used SpeedFan and CPU-Burn a test, but the computer does not restart until the airflow to the bottom is fine (I consider that the entry of the fan on the bottom a design error, but it's something else). Now, if the air flow is a bit stuffy, the laptop stops at about 83 and then it will have difficulty to challenge. Ok.

  However when the laptop is about 63C it restarts sometimes and I feel, it can be a power button is stuck. I have XP installation so that it will always ask before you actually stop, and when I pick up the phone on the side (the plastic box where the power button is integrated in waiting) I often question of the judgment. NP, just click away. But I also feel that the button can get stuck and then the system turns off after 5 seconds of 'holding company' the power button.

  So I just tried to get a quick glance and we should normally be able to remove the keyboard, but this M40 is a challenge. Even after that the keyboard is free, I don't see the actual power button.

  Is there anyway to loook under high elegant green rim the power button? How to open this thing up?

  Tom

  Hello

  As far as I know this little switch cover is fixed by 6 latches and connected with small flat cable to the motherboard. It just seems but if you don't know how to remove it you can damage these small latches and later you won't be able to fix the new.

  Anyway, if you think that this power button / troubled maybe just make the switch cover replacement may solve the problem.
  What say about it? Try to get the spare part and ask if anyone can exchange it for you.
  Of course, the best thing is to ask for professional help, but it will cool somewhat.

  Another way, do a risk and try to replace one.
  Let me know what you think of this.

  Good bye

• Button / stop does not not how to start my mobile

  Hello

  I have the Motorola Milestone A853. I use the GSM of Auntie DOCOMO network.

  This is the second time I had a problem with the power/unlock button. (Last time I replaced him in the warranty is always there until December)

  Last night my phone battery runs. In the morning I plugged it to load, but the power button is not operational. I can't start my mobile.

  I lived the increased harshness of the button / stop for these days. But now I'm stuck.

  Another way to start this mobile?

  The closest repair center is 250 km. It will take a whole day to get there.

  Hi all

  You can start the phone without power button / stop.

  What suits you, just connect the phone to your computer. It begins, at least for me.

  Remove the battery and insert again also also works some time.

  I got the power button on my phone replaced under warranty!

  Thanks to MOTO Customer CARE!

• HP Officejet 1510: HP Officejet 1510 stops Middle Print with button / stop blinking always

  I just bought this printer and I don't know what is happening. The first time I printed something (8 pages) days ago and it printed perfectly without any problems. This time, when I tried to print 6 pages (this printer connects via the USB port on my computer) it has started printing, but after it printed 1/4 first page, he stopped and just sat there. The light was still flashing. Finally he spits out paper with just 1/4 of printed page and didn't even start the following study through the diet. When I watched the queue of the printer on my computer, it seemed that demand was still online, marked as impression. I tried to print one page at a time and it actually worked for a few pages! It their print perfectly with zero problems. Then when I tried to print page 4 by itself, it got stuck once more, after 1/4 of the page prints.

  I did a test print (hold down the power button / stop and the Cancel button) and it printed fine. Does anyone have an idea why I have a problem and how to prevent it?

  Thank you!

  Welcome to the HP community @md1137!

  I understand that you are facing a printing problem with your Windows XP system that prints to your Deskjet 1510. I hope I can help! For me, the issue you describe sounds like a driver problem.

  I would say first of all that is running the print and scan doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  If the problem continues, go to the Control Panel uninstalling the printer software , restart the PC, then download and reinstall the driver to feature full here: e-all-in-one HP Deskjet 1510 Printer series full feature software and drivers

  Try to print again, and the problem should be solved, fingers crossed!

  If you like my answer to your concern today, click on the thumb to the top below!

• Card module Lightroom 6.5.1 mouse button seems stuck

  I'm a new convert to Lightroom after use Aperture on my iMac running 10.11.4 years. So far I'm loving except an annoying bug in the card module. When I'm in this module, it seems as if my mouse button is stuck down all the time making panoramic and navigation in the almost impossible map. As soon as I have the mouse on the map, it climbs some previous position so that I can't navigate to a new location.

  I have a magic mouse, a touchpad and a Wacom tablet on this system. I tried to disable all the running just the mouse or just the pad but and the other does the same thing.

  Sometimes, the system starts to work normally for a short period but will return to mode mouse locked with in a few minutes. Changing the zoom level can be allowing it to work for a while.

  I don't see any reference to this line or in these forums so it must be a rare anomaly or something in my own specific configuration.

  Tips on how to make the card module work properly would be appreciated.

  Being new to Lightroom I was not yet aware that the Panel of the browser was active or useful in the card Module. In fact, I used to use this feature and generally keep the browser panel closed to save space. But this trick does not seem to allow me to use the card module even if it isn't a real problem. I can just go that route and stop looking for an appropriate solution.

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• Satellite S50T-A - button / stop does not

  Hello

  I am running Windows 8.1. After that most recent Windows Update and then restarted, the computer froze to the Toshiba start screen. Fan went into overdrive and so I pushed the power button / stop.

  Now, seems dead - button / stop, black screen, no its HARD drive is unresponsive. Only signs of life are power and battery LED on the front of the computer. Press and hold the power button for more than 10 seconds do nothing.

  Any ideas?

  Hello

  Stop switch force (hole) is available at the bottom of the laptop.
  In the case of PC freezes, do not start or a power failure, which can be fixed by pressing the power button for 10 seconds (force shutdown) and now, use the stop switch to force

  I found this info in this document of FAQ from Toshiba
  [The stop switch of strength (hole) for models with one main battery fixed | http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm]

  A short feedback would be greatly appreciated.

• Whence the "reloading" and buttons "stop" lights up in FF 4.0 SuSE Linux 11.4?

  I'm sick of re-engineering random crap every time I update... How can I get "charge it" / "Refresh" button and the "stop" button back in FF 4.0? I am running SuSE 11.4 32bits. I am not no newbie, but I'm tired to do a kabuki dog dance each new version just came back to where I was before the 'new and improved... '. "Sorry for the flame but it gets old.

  A combined Stop/Reload/Go button that is placed at the right end of the address bar is used in Firefox 4.
  
  During the process of loading page it shows as a stop button and once the charging button is replaced by a reload button.
  
  If you type in the address bar this button would then become a button go.
  
  You can middle - click this button Reload to duplicate the current tab in a new tab.

  If you want to move the buttons Stop and recharge in the position to the left of the address bar, you can use the following steps:

  • Open the window "view > toolbars > customize" to move the Stop button and reload the address bar.
  • Drag the buttons Reload and stop at their previous position to the left of the address bar.
  • Set the "Reload - Stop" order for a combined "Stop/Reload" button.
  • Set the order of 'Stop - Reload' or separate them otherwise to get two separate buttons.

  Press F10 to bring up the 'Menu Bar' temporarily if the menu bar is hidden.

• new tab button stop working

  Since yesterday the new tab button stop working. I tried clicking on the + as usual but nothing happens. It lights up blue when I click but nothing else. So, I tried via file, new tab but also Ctrl + t.
  I tried to restart and update too.

  The Ask toolbar is originally only in versions of Firefox 3.6.13 +. Uninstall this extension.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• 3 peripheral USB connected to the Macbook 4.1 computer tells me to restart using the power button / stop?

  I went to record a live concert, and I need to use a single interface to record the members of the group with microphones near directly to a computer and another interface running for my model of Macbook 4.1 end of 2007, to get signals from the map of the House.

  When I plug my converter USB 3.0 AD / DA in my Macbook 4,1 - the computer sends immediately a window indicating to me to "reboot" the computer using the power button / stop. Ideas or comments about why this happens?

  I read on this forum that USB ports should work with retroactive effect, or accept USB 3.0 devices, but just use a speed 2.0?

  Thank you.

  It could be that it is a requirement of your converter AD / DA she needs to be present at a properly accessible to the OS X when startup sequence it is plugged into a USB2 port.

  Its also interesting to note that, well that peripheral USB3 can be plugged into the USB2 ports... it could be that your device may not work properly unless it is used with a port USB3... for reasons of bandwidth or even certain types of power supply.

  But to be sure...

  Which converter AD / DA are you using?

• Satellite P750-02R - put on by button / stop

  My part number Satellite P750-02R PSAY3A-02R001 used to power on/off button, but will only start up by pressing the Play/Pause button on the control panel above the keyboard media.

  I checked the BIOS to V1.90 and done a system restore. A ran diagnostics and no luck, the laptop turns off not via the power button, and if anyone has any ideas, I would be happy, otherwise, so I have to take it back to Toshiba because it is still under warranty.
  Thank you
  Bruce.

  Hey Buddy,

  I'm a little confused about your ad first, you wrote that you can t turn on your laptop via the Start button / stop and you must write m notebook turn off via the power button not / stop. This confusion of s

  Anyway, you should turn on your laptop if you press and hold the s computer power button for a couple seconds.

  If you want to turn off your laptop with this button, you must configure Windows power management. You can define an action for the s computer power button if the laptop would shut down, sleep, Hibernate, or nothing. Don t forget this must be set for each plan of power if you change them.