Portege R930 - button / stop stuck

Similar Questions

• TPT2 button / stop stuck

  Someone had problems with the power button / stuck?

  I have similar problems mentioned in the post on the forum about problems after extended sleep.

  http://forums.Lenovo.com/T5/ThinkPad-Slate-tablets/TPT2-problems-after-prolonged-sleep/TD-p/979927

  After pushing the button for 5 seconds my Tablet turned on and when I looked back he was off again.

  After watching the power button was fully down and while I could push one side so it would tilt left or right, that I just couldn't manage to get the button to go back again.

  Any suggestions?

  feeding off pop button - try to take off (with nails of your friend) and then reinstall it (make sure you have the right direction and not 180)... which was probably happen something got caught inbetween the button - causing it to stick

• iMac G3 stuck power button / stop

  So, I bought a G3 iMac on eBay. It's a PowerMac 2.2 If you need this information.  A few months later, the power button is stuck in. So I have to keep hitting the power button to get it to turn on. And if I shake the computer, you can turn off. All solutions on how to get this button to be able to take off. The computer was probably not the best handle I see a few pieces chipped through the case and the door for the RAM has tape on it since there is nothing to hold the bottom.

  The initially supplied with your iMac keyboard has a power button.  If you use this keyboard, can you use this button to power instead?

• At startup, updates to Vista is stuck on "Full download 100% - do not turn off your computer". Cannot stop at least stop with button / stop.

  At startup, Vista update will start and get blocked msg on "Full download 100% - do not turn off your computer".  Last night on the left that it runs and it took 12.5 hours before finally coming out of the error status and asking for the password.  Could not stop downloading progress with Task Manager/ctrl-alt-del, etc., unless you use the power button / stop.   This severely limits the duration of use and if/when we are able to use it in an hour or two, it black screens and reboots restart fiasco together again.

  Hello Steve Gardener.

  Thanks for your post.  Try to start your computer in Safe Mode.  This allows the update to install without problem?  If so, start your computer in normal mode and a test for features.  Please let us know the results.

  See you soon

• error 0xc004e003 during activation of Win 7 Pro on Portege R930 - 17 L

  Toshiba Portege R930 - 17L
  S/N: 5D016093H
  (If I search on Toshiba after SN I only find in Toshiba - Ukraine)

  Bought at the shop online "Sigmanet" in Romania.

  It has a sticker on the back w / Windows 8 Pro (small sticker without product key).
  He arrived with the installation of Windows 8 CD.
  Now, it has been pre-installed Windows 7 Pro x 64 SP1 (this laptop has the right of use of Windows 8 and Windows 7)
  Of course, the preinstalled operating system has been slow and gave errors (pre-installed McAfee antivirus, a bunch of small apps, a.s.o.)

  I reinstalled Windows 7 Pro SP1 x 64 (original CD) on a clean partition.
  I can't activate it with the following text:
  Product key: XXXXX-YYYYY-ZZZZZ-XXXXX-YYYYY
  Product ID: xxxxx-OEM-xxxxxxx-xxxxx
  Error code: 0xc004e003

  Now, I spoke with the Microsoft Romania, they tried to help me, but they failed.
  They told me that the license seems stuck at Toshiba, so they suggested to speak to them (Toshiba) to unlock the license or provide a new product key.

  So, I contacted the seller. They passed me at the service of Toshiba authorized in Romania which avoids to help me.

  Now I'm stuck. What to do or who to contact. Everything is so blurry...

  I appreciate any response you can give me. Thank you!

  > It has a sticker on the back w / Windows 8 Pro (small sticker without product key).
  > Happened with Windows 8 installation CD.
  > Now it was preinstalled Windows 7 Pro x 64 SP1 (this laptop has the right of use of Windows 8 and Windows 7)

  Laptop Toshiba computers are preinstalled with Windows systems that are already activated.
  The stickers that you will find at the bottom of the units are the serial OEM key and these keys don't work in relation to other different systems. The OEM key belongs to the preinstalled image.

  So in case you would use the Toshiba Recovery disk and install Windows system using this disk, the serial key is not necessary.

  According to the technical specifications of Toshiba:
  http://www.Toshiba.co.il/en/laptops/Portege/r930/Portege-r930-17L/ the laptop has been pre-installed with Windows 7 Pro 64 bit.

  This means that Win 7 Recovery DVD was not part of the package. Why?
  because the Toshiba Recovery Media Creator software has been pre-installed on this laptop. The software allows you to create the recovery DVDs containing Pro Win 7 64-bit system and the image that is activated.

• Portege R930: cannot use the keys FN under Win XP

  Hye

  I'm French. I'm sorry, but my English is not good. I'll try to explain my problem

  Yesterday, my boss gave me a new computer. It's a PT330E Portege R930-1FE with windows XP, 7 has been uninstalled

  I can't turn off my touchpad. I can't use the Fn key.

  I called technical support and after I downloaded the drivers for seven 32-bit and 64-bit... But I still have my problem

  Please, you have a solution.

  Thank you

  Hello

  Fn keys are controlled by special tools of Toshiba and depends on the running system.

  Using Win XP, you need to install the common Modules and this must be done first. The common modules is an essential component of Windows systems.
  He will perform the other original programming from TOSHIBA to work properly.

  Check this box:
  [Common Module Win XP v6.07.03 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 83752 & OSI D = 10 & driverLanguage = 42]

  To get the other buttons FN working (ie the screen switching output), you must install hotkey utilities for display devices
  [Utility Hotkey for display v1.0.2.5 for Win XP | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 83758 & OSI D = 10 & driverLanguage = 42]

  In order to disable the touchpad, you need to install Touch Pad on / off Utility
  [Touch Pad on / off Utility for Win XP v2.5.5.1 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 83770 & OSI D = 10 & driverLanguage = 42]

  I recommend you to check the page of the Toshiba UE driver and install all the available drivers for Win XP.

• Satellite M40 - 277 keeps restarting - button / stop?

  I have the problem that the (per hour to enter acient) laptop Satellite M40 277 of mine keeps restarting unpredictibally. Initially I have if it was a problem of overheating, so I used SpeedFan and CPU-Burn a test, but the computer does not restart until the airflow to the bottom is fine (I consider that the entry of the fan on the bottom a design error, but it's something else). Now, if the air flow is a bit stuffy, the laptop stops at about 83 and then it will have difficulty to challenge. Ok.

  However when the laptop is about 63C it restarts sometimes and I feel, it can be a power button is stuck. I have XP installation so that it will always ask before you actually stop, and when I pick up the phone on the side (the plastic box where the power button is integrated in waiting) I often question of the judgment. NP, just click away. But I also feel that the button can get stuck and then the system turns off after 5 seconds of 'holding company' the power button.

  So I just tried to get a quick glance and we should normally be able to remove the keyboard, but this M40 is a challenge. Even after that the keyboard is free, I don't see the actual power button.

  Is there anyway to loook under high elegant green rim the power button? How to open this thing up?

  Tom

  Hello

  As far as I know this little switch cover is fixed by 6 latches and connected with small flat cable to the motherboard. It just seems but if you don't know how to remove it you can damage these small latches and later you won't be able to fix the new.

  Anyway, if you think that this power button / troubled maybe just make the switch cover replacement may solve the problem.
  What say about it? Try to get the spare part and ask if anyone can exchange it for you.
  Of course, the best thing is to ask for professional help, but it will cool somewhat.

  Another way, do a risk and try to replace one.
  Let me know what you think of this.

  Good bye

• Bad connection WiFi on my Portege R930-15E

  Hello

  I have a strange problem on my R930 which I tried to solve already for several months, but could not succeed.

  As I recently replaced the WLAN router and the problem remained to the laptop, I know now that it's really the Toshiba which hurts.

  Question: The WiFi is on the 2, 4 GHz WLAN and there are only two local wireless networks here in the neighborhood. The intensity of the signal is supperb (5), but the speed of the network status changes in a few seconds between the 26 and 130 MBit according to the diagnostic tool for Windows 7 (without doing anything with Notepad). I would not care about it if WiFi would work well, but it's not.

  Download videos from YouTube makes sometimes troubled (videos are stuck) but the most important problem is that access to the data to our NAS is really bad.

  I know it can work much, much better that I have also two other laptops that work well, both HP, older than 7 years, shows no such a question, signal WiFi is still at 54Mbps or, on the new, with 150 MB / sec. Other tablets and smartphones also do not have these issues.

  I tried already to have different channels, but does not help. I've updated also the WLAN, the last driver of Toshiba seems to be: Intel Centrino Advanced - N 6235 Version 13.03.2012 15.1.0.21. Is this really the last being?

  In addition, I found around many problems of WiFi in the Toshiba Internet, but so far, none really match my situation.

  But I found that Toshiba seems to have bad WiFi antenna, but I sat just 5 meters from the router, so I don't think that it's a software problem (driver). Operating system is Windows 7 Professional 64 bit.

  Do you have recommendations for me what to do?

  Thank you

  Volker

  Hello
  Indeed, Portege R930-15E was equipped with the Intel Centrino Advanced-N 6235 WLan/BT combo card that supports the 802.11 A/G/N standards.

  The latest driver should be available on the Intel page:
  http://www.Intel.com/p/en_US/support/highlights/wireless/can-6235

  It seems that the latest driver (at that time) was published at 29/12/2014 and its v15.14.0.1 for Windows 8.1
  Anyway, as you can see, this WLan module supports the 802.11A/G/N standards.

  I think you should check in the Device Manager-> properties-> Advanced tab WLan card which WLan standard was chosen. Probably, you could change cela a/g or just N

  Last but not least, I would recommend allows you to check the WLan Card power saving option.
  Option for WLan module energy savings are in the advanced power settings and I recommend you to choose for two profiles (dough/adapter) the performance of the value

• Button / stop does not not how to start my mobile

  Hello

  I have the Motorola Milestone A853. I use the GSM of Auntie DOCOMO network.

  This is the second time I had a problem with the power/unlock button. (Last time I replaced him in the warranty is always there until December)

  Last night my phone battery runs. In the morning I plugged it to load, but the power button is not operational. I can't start my mobile.

  I lived the increased harshness of the button / stop for these days. But now I'm stuck.

  Another way to start this mobile?

  The closest repair center is 250 km. It will take a whole day to get there.

  Hi all

  You can start the phone without power button / stop.

  What suits you, just connect the phone to your computer. It begins, at least for me.

  Remove the battery and insert again also also works some time.

  I got the power button on my phone replaced under warranty!

  Thanks to MOTO Customer CARE!

• HP Officejet 1510: HP Officejet 1510 stops Middle Print with button / stop blinking always

  I just bought this printer and I don't know what is happening. The first time I printed something (8 pages) days ago and it printed perfectly without any problems. This time, when I tried to print 6 pages (this printer connects via the USB port on my computer) it has started printing, but after it printed 1/4 first page, he stopped and just sat there. The light was still flashing. Finally he spits out paper with just 1/4 of printed page and didn't even start the following study through the diet. When I watched the queue of the printer on my computer, it seemed that demand was still online, marked as impression. I tried to print one page at a time and it actually worked for a few pages! It their print perfectly with zero problems. Then when I tried to print page 4 by itself, it got stuck once more, after 1/4 of the page prints.

  I did a test print (hold down the power button / stop and the Cancel button) and it printed fine. Does anyone have an idea why I have a problem and how to prevent it?

  Thank you!

  Welcome to the HP community @md1137!

  I understand that you are facing a printing problem with your Windows XP system that prints to your Deskjet 1510. I hope I can help! For me, the issue you describe sounds like a driver problem.

  I would say first of all that is running the print and scan doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  If the problem continues, go to the Control Panel uninstalling the printer software , restart the PC, then download and reinstall the driver to feature full here: e-all-in-one HP Deskjet 1510 Printer series full feature software and drivers

  Try to print again, and the problem should be solved, fingers crossed!

  If you like my answer to your concern today, click on the thumb to the top below!

• Card module Lightroom 6.5.1 mouse button seems stuck

  I'm a new convert to Lightroom after use Aperture on my iMac running 10.11.4 years. So far I'm loving except an annoying bug in the card module. When I'm in this module, it seems as if my mouse button is stuck down all the time making panoramic and navigation in the almost impossible map. As soon as I have the mouse on the map, it climbs some previous position so that I can't navigate to a new location.

  I have a magic mouse, a touchpad and a Wacom tablet on this system. I tried to disable all the running just the mouse or just the pad but and the other does the same thing.

  Sometimes, the system starts to work normally for a short period but will return to mode mouse locked with in a few minutes. Changing the zoom level can be allowing it to work for a while.

  I don't see any reference to this line or in these forums so it must be a rare anomaly or something in my own specific configuration.

  Tips on how to make the card module work properly would be appreciated.

  Being new to Lightroom I was not yet aware that the Panel of the browser was active or useful in the card Module. In fact, I used to use this feature and generally keep the browser panel closed to save space. But this trick does not seem to allow me to use the card module even if it isn't a real problem. I can just go that route and stop looking for an appropriate solution.

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• Can CPU overheating if Portege R930 goes into sleep mode?

  I have an a Portege R930. I run an application of 25-30% of the CPU for long hours. If I put the laptop in mode 'sleep', the calculation get suspended? If not, and it is still running, how the CPU is cooled when the fan is off mode 'sleep'? The CPU can overheat?

  I * don't * want my program from several hours to be interrupted by a detector from overheating. If I know that the program is suspended in mode 'sleep', I fear enter "standby" mode. If this isn't the case, so I'll keep the laptop awake, and if I need to carry the laptop, I'll put it into hibernation.

  The answer seems to be that the CPU cannot fire because the programs are suspended: http://forums.toshiba.com/t5/Port%C3...p/689961#M4014

• Portege R930 - 14 X and additional software

  Hello

  I recently acquired a Toshiba Portege R930 - 14 X, a friend. It is running Windows Pro 8.1, it came with any disks etc. It does not seem to have any of the supplied software, he would come with out of the box. Please excuse that my ignorance, but is there anyway I can restore it or download it please.

  Thank you very much

  Hello

  According to the specifications of the laptop this model of laptop computer came with preinstalled WIN7 64 bit PRO & WIN8 64 bit PRO DVD.
  http://www.Toshiba.co.UK/discontinue...Tege-r930-14x/

  I don't know what version of the OS is installed now, I mean is it original with update or install own Win8.1 Win8 but all drivers necessary, tools and utilities, you can download from Toshiba support and download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp

  Additional software is included in the recovery image only.

  If you have any other questions please be free to ask.