HP Officejet 1510: HP Officejet 1510 stops Middle Print with button / stop blinking always

Similar Questions

• Vista OfficeJet 6110 do not print black cartridge only (I always get color)

  I can't get my Vista with OfficeJet 6110 to print black cartridge only, that is, I always get COLORS in my impression.

  NOTE: I have the BLUE text in my .odt file and I want to print with just the black cartridge but alaways get BLUE to the exit...

  I hope Bob Headrick reads this...

  What printer driver settings that you use?    I can't install the Officejet 6110 driver, but I tried the following with the Deskjet 6500 driver: in the tab 'Printing shortcuts' select ' Fast/economical printing' in the 'what do you do?"tab.  IN the "Choice of colors" drop-down list select low "on Black Print Cartrdige Only", then apply. For good measure, go to the Advanced tab and enable "text just like Print black" in the tab "Printer features", then apply, OK.

  A similar procedure should give good results with the Officejet 6110.  If this isn't the case, you could install the Deskjet 6500 driver by going to add printer, select local printer, select the USB port the 6110 is on and then select the driver HP Deskjet 6500 Series.  You might have the DEskjet 6500 and Officejet 6110 drivers installed at the same time, they should not come into conflict.

  Kind regards

  Bob Headrick, MS MVP printing/imaging

• Officejet 5610 starts slow printing and button / stop flashes

  This just started happening.  A document (no matter what I print) will begin to print, get the first two lines printed and then take incredibly slow.  Meanwhile, the power LED flashes and the message says "print...". "If I restart my computer and as you turn the printer power on and off, it will correct itself.  Anyone else have this or know what to do?  Thank you

  Looks like the printer can be connected to a surge protector and the surge protector can not provide the stream of electricity the printer needs since it starts then slows down and the power LED flashes.

  The printer is connected to a surge protector?  If so, plug it directly into a wall socket.  If it's related to the surge, the question shouldn't be present.

  Let me know what happens.

• HP Officejet Pro 8620: HP Print with Android

  I am trying to print from Android (SAMSUNG S7) wireless connected HP 8620 and inconsistent - sometimes works, sometimes not. Have installed HP Print Service Plugin and it is on.

  When it doesn't give - error message "unable to change settings. Try again. »

  All the solutions forum?

  Hello

  After you download the plugin, make sure to enable it in your settings. Also try to use the hp eprint app to see if that helps.

• OfficeJet 4500 G510: officejet 4500 does not print with the new computer

  Bought a new lenovo so it of a new computer running Windows 10 and cannot get printing to work with her.  He moved with a wired ethernet, or even wireless, but does print the test page or anything like that.

  Have uninstalled and reinstalled several times without success.

  Tried to install with a USB cable and that crashes, even bought a new cable and still nothing.

  I put off and then to refresh the printer and that did not help either.

  Installing updated drivers and the computer sees the printer and says it is ready and works fine, but do not print.  Convenience store can't find no problem either.

  The printer works perfectly with my iPad in the next room is not the printer.  So for now I have to send my documents to myself and print from the iPad, which is annoying.

  Any thoughts?

  Thanks in advance

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

  Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

  When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work

  HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work

  If HP is unable to repair it, nobody else can either.  Buy yourself a cheap Canon scanner if they cannot make it work.

• HP officejet 4500 g510n-z print but not scan

  HP officejet 4500 g510n-z prints ok but not scan

  A computer to Windows Vista 32 bit

  7 4 Windows machines

  Windows XP 2 machines

  running on the wireless have not tried usb

  No IP conflict

  worked the last time that I used it (months)

  printer works fine (even if I have to restart now and then after the mode 'sleep')

  latest drivers installed

  Ideas anyone?

  Thank you

  Hi sdrrmit,

  It seems that the printer didn't install correctly on your Windows operating system. Follow the steps below.

  First step: clear temp directory

  1. On desktop applications do a right-click of the mouse and select applications. In the application run, type %temp% .
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  The complete solution software

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. on desktop applications do a right-click of the mouse and select applications. In the application run, type %temp% .

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run Disk Cleanup by pressing the Windows and R key at the same time back the term calls and Type cleanmgr.exe and press to enter.  Select all the boxes and all delete. Click on the link below about this tool and no disclaimer.

  Cleanmgr Disclaimer

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result

• OfficeJet Pro L7590 can print but not scan

  My printer (Officejet Pro L7590) can print and copy correctly, but the scan function - that has worked well at the same time - has just up and stop working, and my attempts to solve the problem simply go round.

  • When I try to scan using the button start scan on the printer, I get an error message saying 'no scan options '.
  • When I try to open the solution Center, it is said that he cannot run because the installation is not complete.
  • Uninstalling and reinstalling the software (latest version, which is three years, downloaded from the HP website) do not work. The software seems to go through the process of installation very well, but crashes on the stage finish ("product configuration"). Eventually it times out.
  • Once in this case, the installer downloads a supposed solution of the HP Web site. He told me that it is fixing the problem and asks me to restart the computer, saying it will continue after the restart. After I restart, the procedure does not continue, and the problem is not fixed - all the behaviors I describe above are still occurring.
  • Also downloaded one file with other solutions supposed to this question. They do not work. For the most part, they are variations on "run the setup software again", preceded by various other measures. However, when I do this, it re-not installing - it is a completely different window, and if I try to go back to the installation procedure, he refuses, telling me the software is already installed. (And yet when I try to open the solution Center, he always tells me it is not installed.)
  • Tonight is the third time I tried to troubleshoot it. On three occasions, I just gave up in frustration after a few variations of the cover above.
  • I'm this end =><= to="" going="" all="" office="" space="" on="" this="" printer="" and="" getting="" a="" new="" one="" based="" on="" the="" abhp="" principle="" -="">Anything But HP.

  I can't emphasize enough that it worked in the past and this basis still printing very well (with the exception of some strange problems with certain PDF files), but scanning has broken since my last round of hardware upgrades and refuses to be fixed.

  It's incredibly frustrating. Someone just make it work with minimal BS, as he has done before.

  I realize, this is a follow up very, very late, but apparently the problem has something to do with the 32-bit version of Windows 7 running. I recently installed the 64 bit version and now have no problem with any HP software.

  Well, except that sometimes he asked my permission to do an update then fails to actually download the update (I get the same "could not connect to content url" error message that many others reported here).

  Other than that, which is slightly annoying, but doesn't really affect what anyone, everything works fine now.

• OfficeJet 4636: Unable to print after update to El Capitan (Officejet 4636)

  Hello

  After the update to El Capitan, I am able to print on my Officejet 4636. Each print job begins, ends up perhaps a third of a page and then stops. It doesn't seem to be a updated driver for El Capitan, the less not yet. Will there be a soon? Is there another problem? Help, please!

  Thank you very much.

  Scott

  Hello @officejet4636and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having driver issues. I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend time of the printer:

  Installation of your printer driver HP and software for Mac OS X

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• 7612 All In One OfficeJet: HP Officejet 7612 won't print without margins on A3 + photo paper.

  Just bought an Officejet 7612 specifically for printing photos without edge of 13 X 19. I use Windows 8.1 and tried 5 different paint and photo printing programs. All programs list the same options of paper size for the 7612 (choice 2 choices, and 7610 series watch regular and fax printer). The only options for 13 X 19 or A3 + with HP advanced paper selected photo is low-margin. I went to options/settings and selected the printer printing without margins, but all attempts to cause a small margin. I don't use HP Photo Creations because he won't open a TIFF, which has better quality than JPEG, GIF, BMP, PNG, offers the only options Photo Creations. There are choices for edge to edge printing, but for the smaller paper sizes. I lose paper photo cheap and need help to resolve this.  Thank you

  outaways

  Welcome to the Community Forum of HP.

  Stop wasting your expensive paper right now.

  I can't read this correctly - you may not be able to do with the 13 X 19 inch Photo paper.

  Take a look at the Plug - plain paper for this size, YES - printer Photo Paper: not-so-good.

  If you can't, don't shoot messenger.

  I hope I'm lazy-brain.

  Reference:

  Install the full features software - printer

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• OfficeJet 6500 E710n problems scanning with Yosemite

  I have a MacBook Pro of the retina mid 2012 and have used my Officejet 6500 E710n z via Air Print, but now I upgraded from the Mavericks to Yosemite my scan feature is limited to webscan, with very basic features (I can't scan any other method proposed on these forums). My questions are what software may be available for me scan from my MBP or is it possible to use another driver of scan to improve scan options? How can I stop the Officejet make mistakes of permissions on my hard drive? It is time to invest in a different printer (I hope not)

  Here are the steps I took so far;

  I updated the firmware on my Officejet, this was to remove all the drivers of HP; Perhaps my biggest mistake, that I should let sleeping lying, but I wanted to print on custom paper and may now have the opportunity to do so at the expense of the ability to analyze correctly.

  I repaired disk permissions hard so many times (I tried to repeat the steps or other suggestions people made on these forums). On the last two that my MBP doesn't shut down, the screen goes black and the keyboard lights stay lit.

  I checked for software updates via the App Store. I noticed that it seems that HP did not produce software updated for this model of printing or scanning - which does not involve pilots Mavericks should work? In this case how would I be able to try again. Or HP can produce something in time (I feel that I have some knowledge on how to fix things, but always count on step-by-step assistance).

  I feel also very stupid, like reloading eveything in my preferences, printers and scanners, I noticed a standalone scanner, but no printer. I removed it and found my all in one printer instead. Now I'm wondering if this virtual scanner could me the flexibility I want (like so many people, I hate havig things that only half of the work).

  I hope I've offered a representation about what I do for two days and I hope that there is someone who may be able to help.

  Hello CLBMac,

  Welcome to the Forums of HP Support!

  I would like to start by saying that it is a great information post. You mention that the printer is added via AirPrint, if that's the case, AirPrint will only print.

  Since there is no option for you to install all software complete features of HP and drivers, you need to scan using the means of scanning Apple. Here are the different ways that you can scan: scanning in OS X v10.10 Yosemite without HP software.

  You will need to have the printer added as with complete pilot offered by Apple, not the driver AirPrint. In order to you have the most recent software available, install this: HP v3.0 for OS X printer drivers.

  Once installed, please remove the added printer like AirPrint (reset the printing system is an easy way, will also clearly be other printers, as appropriate), and then add the add new printer with the Officejet E710n driver.

  I hope this helps.

• OfficeJet 6600 fails to print via WiFi in Windows 8.1

  My 6600 Officejet will not print anything wireless (with the exception of the test pages).  Many other posts about this problem, but after about 5 hours of research, nothing has helped.  When I got to the printer, it worked great, but then at some point that this issues started.

  Installation program:

  -Windows Pro 8.1 (my problems seem to begin around my upgrade from 8 to 8.1)

  -Router Asus RTN - 56U

  -Firmware version to print is MIM2CN1322DR

  -Install the latest drivers for printer from 11/03/14

  Details:

  -Whenever I try to print from any source (web, word, etc.) it fails to print and the dialog box displays a HP that says "doesn't have to communicate with printer."

  -If I run the new version of the HP Print and scan the doctor AFTER a failure to print it says 'Print Queue error fixed.  However it still does not.

  -If I run the new version of the HP Print and scan the doctor BEFORE a failure to print it says that everything is fine.

  -Sometimes I can get the printer to print after restarting the computer and the printer, but it seems that once the printer goes to sleep, it stops working.

  -Printing of the test pages always seems to work, and the printer indicates that it is properly connected to the network.

  I tried a bunch of stuff already with no luck, here's what I tried.

  -Tried to re-install the drivers (basic and complete) several times.

  -Uninstalled drivers, then crossed CC driver of the HP cleaning all the 4 steps, then reinstalled the drivers again.

  -Updated my firmware to the router

  -Checked for printer firmware update, none is available.

  -J' tried every troubleshooting step in this article: http://support.hp.com/us-en/document/c02221706

  Any ideas will be greatly appreciated, otherwise I could return this printer as I am out of ideas

  Hi Cheetah12,

  I was able to partially solve this problem, you can see the conversation in the post below.  It begins as someone elses question, but look for my first post in response.

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/error-message-quot-HP-OfficeJet-is-in-error-state-quot/TD-p/2752217

  I will basically be this amount until there is a bug with Windows 8.1 or HP drivers on the 8.1.  I had no problem in windows 8 until I upgraded to 8.1.  It may also have something to do with the fact that I did a full format when the upgrade to 8.1, I made an in place upgrade.  However after cleaning off the coast of a trace drivers, then reinstall and still do not have work, I'm skeptical about it.

  If you read the other post, I installed the printer, then I had to manually add the printer even through the IP address in the TCP/IP protocol in devices and printers.  A device uses the "HP". "Port and the other device uses the standard TCP/IP port.  There is now a duplicate, but now I can print to a printer (remember that I now have 2 devices for the printer).

  So, in my opinion, it's a problem of port, and since then I have lost enough time, I spend more time trying to figure this out for awhile.

• HP Officejet Pro 8600 N911a: HP Officejet Pro 8600 N911a - Print when Fax is not saved

  Can I do so a fax is printed when it is not registered?

  I know that I can put to print and save every time, but I trust HP digital fax to save paper.

  If a fax is not registered, either because of a network error, or if the computer that logs usually in is cut off, can just fax be printed?

  @MrMeow, it's nice to meet you.

  I think I found something that can help your fax dilemma.

  This information has been in the User Guide for the Officejet Pro 8600 e-all-in-one - N911a; PG 69.

  Set up backup fax

  According to your needs best and security, you can configure the printer to store all faxes it receives, only faxes it receives while the printer is in an error condition, or none of the faxes it receives.

  The following fax backup modes are available:

  On >  The default setting. When backup fax is enabled, the printer stores all faxes received in memory. This allows you to reprint up to eight more recently printed faxes if they are always saved in the memory.

  NOTE: When the memory of the printer is low, it replaces faxes print, older because it receives new faxes. If the memory is full of unprinted faxes, printer stop to answer incoming fax calls.

  NOTE: If you receive a fax that is too large, as a very detailed color photo, it cannot be stored in memory due to limitations of memory.

  Error only > Causes the printer to store faxes in memory only if there is an error condition that prevents the printer to print the faxes (for example, if the printer is out of paper). The printer continues to store incoming faxes, as long as the memory is available. (If the memory is full, the printer stops responding to incoming fax calls). When the error condition is resolved, the faxes stored in memory automatically, print and then they are deleted from the memory.

  Off >  Faxes are never stored in memory. For example, you might want to disable fax backup for security reasons. If an error condition occurs which prevents the printer to print (for example, tracks paper printer), the printer stops responding to incoming fax calls.

  NOTE: If the backup fax is turned on and you turn the printer off, all faxes stored in memory are deleted, including any unprinted faxes that you might receive while the printer was in an error condition. You must contact the senders asking them to return the unprinted faxes. To get a list of faxes that you have received, print the Fax log. The Fax journal is not removed when the printer is off.

  To set backup fax from the printer control panel

  1 tap (right arrow) and select Setup.

  2. press Fax Setup, and then click Advanced fax setup.

  3. press on the backup Fax reception.

  4. press on , error, or out of service.

  Reprint of faxes received from memory

  If you set backup fax mode to On, received faxes are stored in memory, whether the printer has an error condition or not.

  NOTE: After that the memory is full, the oldest faxes, prints are replaced as new faxes are received. If all stored faxes are not printed, the printer does not receive fax calls until you print or erase memory faxes. You can also delete the faxes in memory for purposes of confidentiality or security.

  According to the sizes of the faxes in memory, you can reprint up to eight more recently printed faxes, if they are still in memory. For example, you will need to re - print your faxes if you have lost the copy of your last draw.

  To reprint the faxes in memory from the printer control panel

  1. make sure you have loaded paper in the main tray.

  2 tap (right arrow) and select Setup.

  3. touch Tools , or Faxand then select reprint faxes in memory. The faxes are printed in reverse order, where they were received with the most recently received fax printed first, and so on.

  4. If you want to stop reprinting the faxes in memory, press the Cancel button.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• My officejet 6000 after each print job's a lot of internal adjustment is this normal?

  I just installed an OfficeJet 6000 printer. Connection USB and Windows XP. Before you print the first document in the print head appeared a lot of adjustment and once again the document was printed. The following document has started printing almost immediately, but even once, there was a lot of adjustment once the draw has been completed.

  Is this normal?

  Hello kayliv,

  Looks like you can make reference to calibrate the printer performs after each draw. It seems that there is no way to stop it or it is time to decrease. Thus, what you hear is likely to be expected

  Source: can I stop the calibration Officejet 6000 after each print job?