Tracking incognito on iOS, the same Protection?

Similar Questions

• [Q] can Vision track multiple objects in the same area - objects that might cross?

  Hello

  Sorry for this long title, but this is my question.

  Can Vision track multiple objects in the same area - objects that could cross?

  Because I'm able to do, extraction of XY, but it seems that "IMAQ County objects ' don't follow framework after but framework opposed, but extract the coordinates XY always in the same way, as for example from top and whenever he sees an object, it retrieves the XY, but if the objects pass through (then it will extract XY without worrying that the objects was the earlier but just based on"scan from top to bottom").

  That's why I open this topic in the forum of Vision no part: http://forums.ni.com/t5/LabVIEW/Sort-XY-by-closest/td-p/2440428

  Thank you

  Sébastien

  Thank you for your response.

  My problem is that we work with very small insects and the shape/color is the same for all.

  Then the solution is: Let's wait for "IMAQ County objects 3 ' then .

  Thank you

  Sébastien

• Two VPN tunnels on the same device with the same protected networks

  There is a remote site that wants me to put in place two separate tunnels of VPN with the same internal IP at each end. FOR EXAMPLE

  LAN = 10.212.170.201/32, 10.212.170.202/32

  Remote network 192.168.0.0/24 =

  I currently have a tunnel between the above:

  End Point distance = 111.93.152.186

  Local endpoint point = 198.205.115.252

  Now, they want to set up a VPN for the same networks between:

  End Point distance = 115.115.130.34

  Local endpoint point = 198.205.115.252

  It is my understanding that the Cisco ASA 5520 can do. The only way I've seen this done with Cisco hardware is to use two ASAs, but there may be a way to use the costs of road or some other tricks to make it happen.

  I'm open to suggestions.

  Is a backup?

  In, specify endpoint remote second as a "backup" of the peer in the first virtual private network.  Alone will be active at the time - but there are toggled if the VPN in first dies.

• How can I animate various mouse Tracker points at the same time during a recording?

  Hey,.

  I'm trying to animate my character so that his left arm cross out his right elbow, and then the fear character and she jumps on the side. I can't animate the arms at the same time in a single record. How can I animate various mouse Tracker points at the same time?

  Playing right now I seem to be only able to animate a point Tracker of mouse at the same time (i.e. his right arm) and when I return to 're-save' so I can animated left arm, right arm recording is saved on and now only point left mouse Tracker.

  Hope that makes sense, let me know if you need me to develop. Thank you.

  Currently, you'll want to separate Tracker mouse behaviors for each hand. Select the puppet in the project Panel, and then add the second behavior mouse Tracker via the add behavior button ("+") in the properties panel. Then, during recording, make sure to disarm one of them so that other behaviors can control the hand that you drag. We are studying ways to improve this workflow for future versions overview.

• Closing a tab gives the same security that close a browser?

  Before the arrival of the tabs, we have been invited to close the browser and open a new after being on a site that has involved sensitive information.

  Closing a tab in Firefox gives the same level of security, or should I continue to close the entire browser?

  No, who does not have the same protection. Some data may be revoked by closing and restarting Firefox, but even so, you still have the data stored on the disk in the cache or cookies even if you closed all tabs open before closing Firefox.

  You can switch to private browsing to prevent storage of the data at all, or you can use clear history recent to clear the last hour or more if necessary.

  • https://support.Mozilla.org/KB/clear+recent+history
  • https://support.Mozilla.org/KB/private+browsing

  Firefox 4 and later versions Save the previous session automatically, so it is no longer need for the dialog box asking if you want to save the current session.
  
  Use ' file > leave ' or ' Firefox > Exit ' (Mac: ' Firefox > quit Firefox ") If you want to restore multiple windows or have problems with the restoration of the tabs.
  
  You can use ' history > restore previous Session ' to get the previous session at any time.

  There is also a button 'Restore previous Session' on the default on: Home home page.

• iCloud does not synchronize my MBP 2013 (OSX 10.9.5) end and my iPhone 5 (iOS 9.3.1) the same

  iCloud does not synchronize my MBP 2013 (OSX 10.9.5) end and my iPhone 5 (iOS 9.3.1) the same thing. Mail sent to me via my mail ID Apple gets to my iPhone, but not for my MBP.

  Apple Mail troubleshooting

  Connection/window/mail doctor show what? If the server is red, select it and observe the box show details.

  Send and receive e-mails of troubleshooting

  Post not send or receive messages after updating to OS X

• After installing iOS 9.3.3 two iphones on the same apple ID are evidence of the other device call log.

  I use two iphones on the same apple ID. After installing ios 9.3.3 two iphones show the other call log also. In my view, that is a bug in ios9.3.3, because this problem started after the new ios.

  No this is by design, and it was not introduced with 9.3.3 much earlier

• Help please - why is noon suddenly registered double on the same track (instances on several tracks)?

  Hello everyone, I have been recording of MIDI tracks years on my MacBook with no problems. All of a sudden, MIDI tracks began to record notes duplicate (exact replica - even not, same speed, etc.). ... This has happened on most, but not all, tracks I recorded in the past day or so.

  I was working on a special project with a lot of MIDI tracks and a couple of audio tracks - what is shown in the YouTube video that I have included to illustrate the problem:

  https://youtu.be/AaNOxfwzsmg

  All MIDI tracks recorded in this project before the past 24 to 48 hours recorded normally without duplication. About 90% of the tracks I recorded recently have duplication. The first brief example in the video shows the bass track, that duplication of work and represents 90% of the securities. The next example short - track of cajon - has not been saved with the duplication (so far, it's the only track I checked and made record normally in the last 2 days. Pieces recorded both before and after that the cajon track was duplicated notes throughout.

  The MIDI keyboard, I use as a controller as a Roland FP80. I used this keyboard for all MIDI tracks that don't require modulation or tar leaning over recent months. The MIDI keyboard transmit channel is set to 1, and to my knowledge, there very lunch limited functionality and cannot transmit multiple channels. (It's a good size weighted keys digital piano and this is why I use it.)

  If anyone can help identify the cause of this problem I would really appreciate it! The second part of the question is I would like a quick and easy way to delete ONLY the notes duplicate on all these tracks. I had already saved 7 or 8 in the project MIDI tracks until I discovered this problem when I started to delete some notes. I would like to be able to preserve what has been recorded.

  BTW, I looked for this problem and found a similar thread, but I think that the solution is that the used keyboard passed on several MIDI channels. As much as I know who does not apply in this case.

  Thanks in advance!

  SYSTEM SPECS:

  MacBook Pro (retina, 13 inches, end of 2013)

  Mac OSX Yosemite - version 10.10.5

  Processor: 2.4 GHz Intel Core i5

  Memory: 8 GB 1600 MHz DDR3

  Graphics card: Intel Iris 1536 MB

  Logic Pro X - version 10.2.0

  Working backwards... You can remove duplicate events by selecting all the events in a region (cmd-A) if in the roll of piano or selecting the region then go to menu edit - midi events Delete - reproduced.

  or (D).

  On why - there could be a number of reasons... First, open the list of events by pressing D and see if they are in fact identical... especially on the same channel environment.

  Also - if you could upload a screenshot of the low track to include both region and the railway inspector.

  

• You can use the activity tracker and an application running at the same time?

  I've been running just with my watch and the Apple activity tracker.

  But I wanted to calibrate so tonight I ran with my iPhone, too.

  I tried to use the Nike + and the PPP of activity both starting on my watch. I ran with the application of the activity on the screen.

  When I did I stopped the activity app and went to the Nike + app, but it was stopped.

  Then can you run the application of activity and a different running application at the same time. Or do you need to start another app on your phone and activity on your watch?

  Thank you all

  Hello

  To save your route at the same time apps, save the workout using the application of the workout on your Apple Watch (early check it there first) and also through the application of Nike + running on your iPhone.

  Monitoring of your training via the integrated application of the watch workout will cause your heart rate to be monitored at all times for the duration of your workout.

  The app Nike + running cannot currently access heart rate monitor watch directly, but if I read the heart rate data of the health on the iPhone app, it will always be able to access - indirectly - the same heart rate for your exercise data:

  -On your iPhone, in the application of health, press Sources (tab) > Running > turn on Allow 'Running' to read heart rate data.

• I can't install the new iOS on my iPhone. I get the same message that I am not connected to the Internet. I am connected through cell phones and Wifi. What I don't see?

  I can't install the new iOS. I get the same message saying again and again that I am not connected to the Internet. I have both cell than on wfi. What I don't see?

  Apple pulled iOS 9.3 for older devices. Wait for a patch.

  (140932)

• How to send the same configuration to multiple tracks?

  Hello community,

  I find that so many times I do a lot of the same process for a traks. For example, to pizza. all channels or to set the same level in the Expression of all titles and so on...

  I like the list of events, but is this detales of only a selected range. Advice, please.

  Master - Mac Mini 2.3 Ghz Intel Core i5, 8 GB, HD on Toshiba 500 GB, Mac OS X 10.10.5 system.

  Logic PRO X (10.2), RME FIREFACE UFX,.

  ———

  Slave - MacBook Pro 2.2 GHz Intel Core i7, 16 GB, Systen on Intel SSD 180 GB, Mac OS X 10.10.5.

  Sound library on 1 TB SSD, Pro 2, FIVE 5 Pro, VS, MIR PRO VI,

  To insert plugins on several tracks to create buses on several tracks or to set the outputs or inputs to the same as that of the bands of multiple channels or tracks all what you have to do is Select the tracks and perform the action on one of them.

  

  In addition, if you have configured a channel strip includes several plugins you can save this channel strip and then just pick on others to load all at once.

  http://help.Apple.com/LogicPro/Mac/10.2.1/#/lgcp35966da6

  And as an alternative, you can create groups of tracks (change a setting on a track in the group it will change for all in this group - without having to select the number of channels.)

  http://help.Apple.com/LogicPro/Mac/10.2.1/#/lgcp8e7ab0b8

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• Siri handsfree works intermittently after updating iOS 9.2. Anyone else having the same problem?

  Siri handsfree works only intermittently after updating iOS 9.2. I have a Mustang from 2015 with my ford touch. Siri handsfree worked perfectly before the update. Now when I use it it disconnects sometimes. Anyone else having the same problem?

  Yes, I have the same problem with my Ford Escape of 2013 using MFT version 3.8 (just installed).  Use IPhone with IOS 9.2 6.  I can call him only intermittently SIRI when I use the long pull on the switch.  Also, when I do it, SIRI goes my audio setting that I played (usually USB iPod) to BT audio.  I'm trying to see if the fix suggested elsewhere for the BT audio works but were unable to invoke SIRI to check.  Ford Sync experts were of great help and finally told me to go to the dealer.  I read somewhere after a 'google' search a person represents himself as a guy HE said it's a problem of IOS and Ford does not change (code) until we as customers.  That's all I know right now.

• Can anyone help. Since I've upgraded to iOS 9.2 earlier this week, the battery on my iPad began draining at an alarming rate, compared to previously. Anyone experienced the same problem and, if so, found a solution? Thank you very much.

  Recently upgraded to iOS 9.2 and immediately noticed that my iPad now battery very quickly compared to before the update.

  Has anyone had the same problem and, if so, identified the solution?

  Thank you very much

  Paul

  Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

• NumberSync activate on my number but no wife on the same account 9.2 iOS, iPhone 6

  Just my wife and my phones updated iOS 9.2, the two iPhone on AT & T 6.  I was immediately able to activate support for Numbersync under Wifi calling on mine and then was able to add Wifi calling for my Apple Watch, but when I updated the phone to my wife, who is a different on the same number account of AT & T, she had no option for her and also no option to add Wifi calling on his app shows.

  I tried the Wifi toggle, the call and the restart of his phone.  No luck. Can anyone help?

  THE FIXED!  She became an available option until I went to settings > General > about. Once there, he told new carrier, accepted, settings and the option appeared after that under settings > phone > Wifi calling as expected.