Tragedy occurred on the Ranch! Send in the reinforcements

Similar Questions

• I can't send an e-mail. I get a message that says "an error has occurred on the POP3 mail server. What can or should I do? Thank you very much

  As I said, I use Mozilla Thunderbird for my emails. I can't send an e-mail. All I get is a message saying: "an error has occurred on the POP3 mail server. What should I do to get this working and sending emails? Thank you, Gary

  Suggest you try the Thunderbird support forum at http://getsatisfaction.com/mozilla_messaging.

• Error message States 'A TCP/IP error occurred while trying to send data to the Server Error 0x800ccc13' when try to open Microsoft Outlook 2000.

  Original title: Office of Microsoft Outlook 2000 does not open.

  Error message States "A TCP/IP error occurred while trying to send data to the Server Error 0x800ccc13 #

  Hi John,.

  1. what operating system is installed on your computer?

  2 How long have you been faced with this problem?

  3. don't you make changes on your computer before this problem?

  
  Reference: Outlook 2000 Solution Center

  Please post back and we do know.

• Error 2147220995 has occurred to the unknown

  Hello

  I try to use the toolkit to Vanessa echem, more precisely a updated the IV table VI, measuring more than current 5 cycles at a specific voltage. This process then repeated a number of iterations, each time to the intensification of tension in increments of 0.1 volts. After each iteration, the last of the 5 points is recorded in another graphic in the hope of generating a curve on a specific range of voltages. However, every time I run the program, one of the following error messages appears generally, always at the end of a loop when I close the mention the potentiostat at the end of an iteration of the loop, but not always at the end of the iteration as well.

  Error 2147220995 has occurred to the unknown

  536870863 error has occurred with the exception

  two of these errors are unknown so I don't know what to change. The confusing part is that the errors do not occur always and when they do it is not always at the same point in the program. For example, sometimes it will run thtouigh several iterations with no problem and other times, it will display an error in the first. I use version 8.5 and have attached the VI changed as well as the VI original table IV that was included in the software.

  Thanks in advance for any advice,

  Kai

  Have you tried to contact the developer for the Toolbox?  It looks like some kind of exception thrown within their Automation object.  This kind of thing happens generally in passing in the wrong type of parameter or by sending something out of range.

  Have you tried to probe the cluster of error to try to isolate which call is throw the exception?

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• Windows 7 of fingerprints of connection problem, error ' year error occurred preventing the use of your information for fingerprint identification.

  Original title: wndows 7 fingerprint logon

  I like to use fingerprints for better security authentication when logging a session Windows or unlock. I can create a long, highly secure password and do not have to type it every time I have lock Windows. BUT...

  A week or two ago, the sensors of validity fingerprint reader on my HP Pavilion dv7 stopped working. I reinstalled the latest driver from HP support device, and everything worked fine for a day or two. Now the sensor still works, but Windows (7, home edition, SP1) gives me the message "year error occurred preventing the use of your fingerprint credentials." The only thing that has changed, I know, is the latest Windows updates.

  Can anyone help? Thank you!

  Hi Frank,.

  Thanks for the reply.

  I suggest you to refer to the article and check if it helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03061709

  If the problem persists, I suggest you send the request in Support HP for assistance.

  http://h30434.www3.HP.com/

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Cannot create a new illustration. Problems occurred during the recording of the print file.

  I can't open a new Illustrator file. He sends me this error: failed to create a new illustration. Problems occurred during the recording of the print file. ID:-1

  I opened a previous document created in CC, but it does not allow me to copy and paste items from one doc to another.

  I rebooted with nothing doesn't.

  System:

  Adobe Creative Cloud CC

  Mac Book Pro 2012

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  On a mac, but it seems that it has resolved itself. In my view, that it may have been a corrupted file that threw everything off. Thank you.

• An error occurred in the subscription at the following events: event subscription

  Dear all,
  
  I received an email from mail WF which is less to:
  
  + From: XXXX WAX [mailto:wfmailer@XXX WAX.com.xx] +.
  Sent: Monday, March 28, 2011 15:24
  To: XXxxHrmsSupport
  Subject: Measures to be taken: the ERROR Local event: oracle.apps.ar.hz.Location.update / oracle.apps.ar.hz.Location.update32336
  
  
  
  IN SYSADMIN
  
  Sent March 28, 11 15:23:08
  
  ID 265172
  
  
  
  
  An error occurred in the subscription at the following events: event subscription
  
  Name of the error event:
  Event Error Message:
  Battery error event:
  
  Event data: event data URL
  
  Other details of the event:
  
  
  
  
  Event field value
  
  Event name oracle.apps.ar.hz.Location.update
  
  Key oracle.apps.ar.hz.Location.update32336 event
  
  Agent WF_DEFERRED
  
  The system of PROD. OWSC.COM
  
  The agent
  
  
  To the system
  
  
  Priority 50
  
  Shipping date March 28, 2011 15:20:18
  
  Receive Date March 28, 2011 15:21:35
  
  Correlation ID
  
  Parameter: USER_ID 2085
  
  Parameter: RESP_ID 50348
  
  Parameter: RESP_APPL_ID 660
  
  Parameter: SECURITY_GROUP_ID 0
  
  Parameter: ORG_ID 81
  
  Parameter: Location_id 924
  
  Parameter: #CURRENT_PHASE 101
  
  Parameter: ERROR ERROR_TYPE
  
  Parameter: GUID_sous A242DC2FF79D70A7E030
  
  
  History of action
  
  NUM
  Action date
  Action
  Of
  TO
  Details 1
  
  + 15:23:08 + 28 MARCH 11
  Send
  SYSADMIN
  SYSADMIN
  
  
  
  
  
  Please click on one of the following choices to automatically generate an email response. Before you send the e-mail to close this notification, ensure response a response all guests include a response desired quoted value.
  
  New attempt at revival event
  
  Retry recovery event: interrupt Raise Event with Raise key event with key Event and event data recovery with the event key, event data and settings information request
  
  
  
  The client waits for a mail detailed the OED... well to want to help me find this mail WF response,
  
  This letter, which is the reason, what action I need to take to do this?
  
  Concerning
  Hameed

  Hamza says:
  Dear all,

  Kindly help me, I'm waiting for your response and advice earlier.

  Concerning
  Hameed

  Dear hamza,

  We are just volunteers, so don't expect does not have to be available in the forum 24 x 7

  And, due to production please always connect a SR.

  Thank you
  Hussein

• ORA-29702: an error has occurred in the operation of Service of Cluster Group

  Hello
  
  After closing down a knot trying unsuccessfully at the start of this node:
  
  SQL > startup
  ORA-29702: an error has occurred in the operation of Service of Cluster Group
  
  I got this message.
  
  Here is a log of file: orcl2_lmon_13886.trc
  
  */Oracle/admin/ORCL/bdump/orcl2_lmon_13886.TRC*
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
  With the options of partitioning, Real Application Clusters and Data Mining
  ORACLE_HOME = / oracle/DB
  Name of the system: Linux
  Name of the node: DB2
  News Release: 2.6.18 - 53.el5
  Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
  Machine: x86_64
  Instance name: orcl2
  Redo thread mounted by this instance: 0 < none >
  Oracle process number: 5
  The Unix process PID: 13886, image: oracle@DB2 (MON)
  
  :() 2008-12-19 10:08:26.214 SERVICE NAME *.
  SESSION ID: (1102.1) 2008-12-19 10:08:26.214 *.
  21522 GHG 8 resource pool
  GHG enqueues 33158
  GES CPI: Receivers 3 shippers 3
  GES CPI: Buffers receive 1000 Send (i: 2750 b:1934) reserve 1000
  GES CPI: Msg 408 lot 8192 regular size
  Factor of batch processing: enqueue replay ack 201, 224
  Factor of batch processing: cache size 126 by 64 lock replay
  kjxggin: receive buffer size = 32768
  clsc_connect: (0x1d19a030) no listener to (ADDRESS = (PROTOCOL = ipc) (KEY = OCSSD_LL_db2_crs))
  * 2008-12-19 10:08:29.819: CSSCLNTclsssInitNative: connection failed, rc 9 *.
  kgxgncin: SATC init failed with status 3
  kjxgmin: kgxgncin failed - (2)
  kjxggin: generic group layer init fails
  2008-12-19 10:08:29.819 *.
  Stopping the queue Service global
  2008-12-19 10:08:29.820 *.
  enqueue global service detach CM:pid = 13886
  
  I did check the listener, it didn't work, but I start it:
  
  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  Alias LISTENER
  Version TNSLSNR for Linux: release 10.2.0.3.0 - Production
  Start date December 19, 2008 10:49:42
  Uptime 0 days 0 h 3 min 55 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP ON
  Parameter Listener of the /oracle/DB/network/admin/listener.ora file
  The listener log file /Oracle/DB/network/log/listener.log
  Summary of endpoints listening...
  * (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521))) *.
  The listener supports no services
  The command completed successfully
  LSNRCTL >
  
  Could you give me a guide how to start this node? or where is a problem?

  Before the start of the database, you can, you must start the CRS.

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB

• Numbers: Count the number of times that a country occurs in the list

  A bit of history... I use version numbers 3.1 (OS X El Capitan 10.11.3)

  I have a list of countries of origin of the students in my school.

  I would like to have a form of analysis of the how many times a country occurs in the list.  IE: Australia 13, England 46, China 2, etc.

  I tried to use the COUNTIF function but I can't seem to make it work.

  Thanks in advance

  Assuming that the column with the country of origin is the D column

  

  Create a second table as shown where you can summarize the country of origin.

  in the tables of bothe, the first line is a heading row.

  in the table on the right, enter the list of countries in column a.

  B2 = COUNTIF (student Roster::C, A2)

  This is short hand dethrone select cell C2, then type (or copy and paste it here) the formula:

  = IF (counta (a2) > 0, COUNTIF (student Roster::C, A2), ' ')

  Select cell C2, copy

  Select cells C2 at the end of the C column, paste

• Firefox Version 27 Action Menu error in Reporting Services. An error has occurred with the extraction of data.

  Hello, since I've updated for Firefox 27.0.1 on Windows 7, I have a problem with Reporting Services on a Sharepoint site. It is a site of Sharepoint 2010 with SQL Server Reporting Services 2012 Sharepoint integrated mode. I was already on Firefox version 26 and didn't meet with this problem.

  When a report is opened and you use the Actions link on the Reporting Services toolbar, I get the following error messages.

  An error has occurred with the extraction of data. Please, refresh the page and try again.

  I tried updating to the beta version of Firefox 28 but the same error occurs. I see that someone else is having the same problem here. http://SharePoint-community.NET/forum/topics/reporting-service-and-Firefox-27

  Any help would be appreciated. Thank you!

  Ryan

  Firefox version 28.0 has corrected this problem. Thank you!

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• Satellite X 200-213: occurs on the recent video games display objects

  Hello, first of all I'm sorry that I do not speak English very well then, perhaps, it will be difficult for you to understand me and for me to understand. Let's try ^^

  As the title says, I have problems with artifacts on my laptop X 200-213. It occurs only on "recent" video games such as Tomb Raider Legend, Oblivion, Prey...
  Textures are flashing, they can disapaer, strange parasites can be here too.
  Here's an example of what it can be, and is often worse:

  [Image 1 | http://img168.imageshack.us/img168/5568/artefactuk4.jpg]
  [Image 2 | http://img213.imageshack.us/img213/4056/artefact2bm8.jpg]

  Artifacts appears after a time of random game, only on the new levels of games, it does not occur if I stay on the same stage, I have to be originally a "loading screen" (I want you to understand me because I don't know how to say it ^^).

  I have never overvlocked nothing is very strange.
  This problem has occurred on the pre-installed nvidia drivers that have been installed when I bought the laptop. There are on the Toshiba official site and other drivers nvidia drivers too.

  I realized something: when drivers includes the Nvidia Control Panel, there are has artifacts, when it is not the case as on the pre-installed drivers or other non official as 163,14, it is not artifacts.

  I know I should use these drivers but more recent offers better performance and it is not normal: I want to be able to update my display drivers without artifacts.

  When I tried to see the temperatures, I find them so I don't know if it's an overheating problem.

  Please help me, I will be grateful.
  And sorry for this terrible English.

  Hello Florent

  I'm afraid there is nothing you can do. The graphics card is defective. Please contact the authorized Service partner as soon as possible. The addresses and telephone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Sorry :(