Training workstation

Similar Questions

• z820 workstation: Hp z820 troubleshooting installation windows 7

  Dear expert HP,

  Thank you for your time

  I need advice to install windows 7 Professional on HP z820 workstation product number is WM441EA #ABU. I tried many things, but a mistake ((no driver device not found)) is always indicated.

  Like the attached photo.

  Do things that I have

  -RAID + sata to IDE mode AHCI passant... which is my only option

  -change the sata IDE compatible mode to improve

  -Disabling EFI boot Sources

  -Disabling the boot legacy sources.

  These measures all lead go me, i.e. no device driver were found. my best shot the installation continue but without a hard drive display for format or delete.

  All boards

  Thank you

  

  Hello:

  With the BIOS RAID + AHCI value, see if it works...

  I zipped and tied the Intel storage controller drivers for your model below.

  Download and unzip the files in the folder.

  Get a USB flash drive and copy the files in the folder on the flash without the record player.

  With the drive plugged into a port USB 2, and W7 in the PC installation media, start from the W7 installation media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• HP XW8600 workstation

  I try to install Windows 7 Professional 64 bit on HP XW8600 workstation with a new Seagate Baracudda 3 TB of hard disk.

  I'm trying to install Windows 7 Professional through key USB Bootable.

  It starts up fine but after copying windows files and updates online when it restarts. It comes with the error "installing Windows could not configure windows to run on this computer hardware."

  Please advise me to solve this problem

  Thanks much adavance

  Hello:

  You can also ask your question on the Forum to Support HP Business - xw workstations section.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.UryLq-l3u9I

  The main reason for this error is due to Windows do not have the SATA drivers needed to properly install the operating system on the hard drive.

  You can try this first before posting on the Forum of Business Support.

  Unzip the files I've attached at the bottom of this post (underneath where it says attachments).

  Then copy them to a usb without all the files flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• 10 workstation online best way to keep the host offline and guests?

  Newbie question: Workstation 10 - have a host Windows 7 Ultimate x 64, several guests Linux Mint 17.3 (KDE). The machine is portable i7 with 16 GB of RAM. The network is wireless only (cannot use cable in current situation).

  I would keep the Windows 7 host permanently out of the network. The guests are online and used for web and similar access. What would be the best way to set up on the side of the network, assuming that it can be done?

  Thanks a lot for your help!

  PH

  Hello

  Well this is... depends on what you intend to 'offline' for the customer.

  If you are planning that the guests to be accessible from the outside (I mean through wifi to your host), the host has (?) to be somehow connected, so online?

  There is perhaps a way to restrict connections from hosts on the outside... so that web page in emails do not work, but the host is will still be able to receive a part of traffic in my humble OPINION.

  With my knowledge and my experience, I know:

  -You can connect a guest with his * own * USB hardware. I mean you can disconnect from host a WiFi USB (or USB ethernet adapt) card and connect it to a given host. So the host could be offline (no wifi, no ethernet), but the guest can be connected through the material, it will set up.

  -guests could communicate with each other via a 'host-only' adapter or a bridge (as your ethernet NiC).

  -When the ethernet NiC host is physically connected (and guests on her bridge), communication between clients is broken... but a software solution is to add a dummy loopback adapter to simulates network card is connected. In this used during travels by train, without ethernet or wifi, to avoid changing the working configuration of the guests in bridge on the ethernet adapter that I used to have to work! :-) Modifying simply physical WMnet0 (eg) to ethernet virtual network configuration microsoft Loopback to tour.

  Took the 3 above stated and your configuration:

  -1 host must be offline

  -several guests that should be online

  -ethernet to the home not connected

  You can try to:

  -installation of a map of looping to the host (http://www.groovypost.com/howto/microsoft/install-a-loopback-adapter-in-windows-7/ )

  -connect and configure a physical map of wifi USB to one of your comments (comments should have a virtual USB controller installed).

  -share your comments above WiFi connection.

  -Configure the * other * invited to use the above share under their gateway address (and DNS I guess?) and set up their virtual connection through the loop (you may need to manually change the address/subnet of the closure to match that of the shared connection).

  It's an idea to dig.

  Own a unique login prompt works for sure, but use it as a gateway to the other guests might be the tricky part (at least for me)!

  My 2 cents! ;-)

  Kind regards.

• Fatal error VMware Workstation: (svga) Exception 0xc0000005 (access violation) - VMware keeps crashing and our controls engineer was not able to understand, can someone help to solve?

  
  So I'm a summer at a paper factory and my boss, the engineer of controls has not been able to understand why VMware Workstation on a certain laptop hangs. I tried to create the log file I see posted the number of threads, but what I have is a compressed file which doesn't seem to have the info I've seen... or at least not in the same format. So I'm a complete newbie to VMware, and I searched the knowledge base and could not find any direct matches, at - it ready to help a newb? Really appreciate it and it would really help me as far as my training goes. TQ ahead!

  Just in case where I did maybe right I have attached two support files that I created.

  https://www.thebuddyforum.com/demonbuddy-Forum/65752-video-drivers-constantly-crashing-VMware-9.html

  I noticed that many people have the same problem with my computer when their computer/laptop has an AMD/ATI video card. Here's all I did and I got now work stations facing up and running for a week without any apparent problem

  1 back up your Virtual Machines a safe place and uninstall the workstation

  2 uninstall the AMD/ATI drivers

  3 reinstall the drivers

  4 reinstall the workstation

  5 follow the instructions below exactly to make a registry change

  a. Open regedit.exe and backup the registry, if you don't know how just google it is incredibly easy to make and the instructions are abundant so I don't post them here.

  b. open Notepad and enter the following text, make sure it is correct that the registry change can be risky, but if you enter the text exactly as it is below, you shouldn't have any problems because I have none. I take no responsibility if you have errors after this regedit so do at your own risk. Be sure and enter all the notebook INSTRUCTIONS below. DO NOT WRITE THE INSTRUCTIONS IN NOTEPAD IN YOUR NOTEPAD FILE. Everything below.

  NOTEBOOK INSTRUCTIONS

  Windows Registry Editor Version 5.00

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\DCI]

  "Timeout" = dword:00000014

  TdrDdiDelay "= dword:00000014".

  "TdrDelay" = dword:00000014

  "TdrLevel" = dword:000000

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers]

  TdrDdiDelay "= dword:00000014".

  TdrDelay "= dword:00000014".

  TdrLevel "= dword:000000".

  END NOTEBOOK INSTRUCTIONS

  c. then navigate to the file and click on Save AS, when you arrive at the location you want to save the file, click the type box and change text to all documents, and then name the file regardless of your choice and add the .reg at the end. Once you have saved the file to its location and double click it to open it, windows will ask if you want to merge with the registry click Yes, windows will be also alert you on editing the registry and if you don't know that you want to try it go ahead and do it. So far, it has worked great for me.

  For more information about editing the registry, I used click here

• VMWare ESX Server training

  Hello experts,
  I'm new to vitrualization.
  I installed vmware workastation v 7.0 and I also have VMWare ESX Server training Trainsignal dvd for training so here are my questions:

  Can I install VMware vSphere Hypervisor 3.5 on my VMWare Workstation 7.0 for training v?

  Is - this VMWare vSphere Hypervisor 3.5 product different from VMWare ESX Server 3.5?

  I'm you ask all these questions because I want to be sure I can complete a training with VMWare vSphere Hypervisor 3.5 suite drive of my Trainsignal VMWare ESX Server 3 and because I am not allowed to download the evaluation version on VMWare ESX Server 3 and because the VMWare customer service could not answer my simple question and quoted me to the community by them to get advice.

  Thanks in advance for your help and advice.

  Hi nasolsi,

  Can I install VMware vSphere Hypervisor 5 straight on my VMWare Workstation 7 training without affecting my HDD physical whole?

  Yes, it has nothing to do with your actual score and highlights form the part of space, he took from your partition to create the disk of the virtual machine. So basically it will eat the space in the physical partition but does nothing else like the formatting of the entire disk.
  

  
  

  and the performance on my PC?

  No, this will not affect your PC's performance as the workstation will run the pages of RAM and cycles on your physical PC hardware microprocessor.

  
  

  If permitted increase RAM by a value so that you do not encounter CMTF or any other problem. 2048MB is the minimum memory required to run ESXi.

• Questions to install VMware Workstation

  Hello everyone and thank you for your interest in my post.  For the last 6 months I spent reviewing messages to build and run a secure Channel 5 on a laboratory at home and collected a lot of information.  Budget delays I am not near my goal I thought I'd be so I thought I would get something on my current equipment with VMware Workstation.

  I got a 64 bit Windows 7 with Intel I7 processor gaming computer and wanted to add Workstation 8 or 9 now that it is out.  Finally, I would like to build some virtual labs, but now want to get running in the virtual world.

  Help for the following questions would be appreciated.

  1 install Workstation 8 on a Windows 7 64 bit computer or do a clean install on the computer and run a Windows 7 as a virtual machine?

  If a clean install Workstation 8 or 9 is recommended how could I get my image of Windows 7 today converted to a virtual machine before the clean install?

  Guess the question would be, is I there a VM tool that can convert an image of current computer hardware in a virtual machine so that I can run on a new installation of VMware Workstation 9?

  2. what steps should be taken to migrate from a hardware configuration to a configuration of the VM on the same box?

  3. what risks are there to lose data?

  4. what license issued or limitations can I exect meet when I create several virtual machines, alias windows, Linux and others?  Can you build and run several different VMS at the same time?

  5. return to the VM tools, I know on the side of Vsphere there are tools to create virtual machines for ESXi, but what tools are there for Workstation 8 or 9 build and run virtual machines?

  That ye may know that my training and the ability to understand your answers I was in the field of information technology since 1990.  Currently, I am a network engineer and have experience as a non-virtuelle system administrator installs computer and server and operation.

  Thanks again to all who help out.  I hope that once I get the speed I can contribute to the community as well.

  David

  Since you are a "Network Engineer and have experience as a system administrator" then IMO shouldn't really ask!   How hard is it to type 'physical to virtual' in Google and get to VMware vCenter Converter?  Also read the documentation on it as well as VMware Workstation!   Yes I know you said "on non-virtuelle installs computer and server and operation" however do practically is fundamentally not different then do it physically, although with virtualization, there are additional methods that can be used, as using an ISO Image vs optical media to install from, etc.  Seriously with your course, you should be able to install VMware Workstation, browse and examine the different menu commands and create VM almost without having to read the documentation however takes the time to at least he skim initially and then jump in.    As a tip activate everything installs Windows without first installing VMware Tools, if you plan to install VMware Tools in the virtual machine, and wait until you are sure that you have configured as you want, and then select as appropriate.

  One thing you'll need to do if you are using the latest version of VMware vCenter Converter you will need to select the correct mass storage controller as you walk through the wizard because it is by default in the IDE and you want LSI SAS with Windows 7.

• Investigation training VMware

  Hi, I am working with Microsoft Directory services and not updated on the vmware technology however want to do some necessary system administrator vmware courses/training. I contacted an Institute which said that they would help me learn the course "VMware vSphere: install, configure, manage [VCP5] training program." I don't know, it is the right thing/track that I should follow or else? please help. Thanks in advance

  Hi Amit,

  "VMware vSphere: install, configure, and manage" is the right of the course, however before attending the class to learn the basics of virtualization and try to install vSphere VMware workstation and discover yourself.

  See the links below.

  http://www.VMware.com/virtualization/what-is-virtualization.html

  http://www.VMware.com/PDF/virtualization.PDF

  For more information on workstation:

  http://www.VMware.com/company/news/releases/VMW-workstation-082312.html

  http://www.VMware.com/products/workstation/overview.html

  For more information on vSphere:

  https://www.VMware.com/go/SV-vSphere-eval-en

• VMware Workstation 7.1.5 network affecting same subnet on vmnets

  Hi all

  I've been on a training course and all the laboratories were VM.  I'm trying to re-create the configuration they had, and I hit a problem.  Look at the photos attached and you will see the setting they had.  Basically, they had set the same subnet on vmnet2 and for vmnet3.  They were running VMware workstation on Windows 7 64 bit 7.1.4.  I am running VMware workstation on Windows 7 64 bit 7.1.5.

  When I try and re-create VMnet2 and for VMnet3, I get an error message saying how they have the same subnet and I need to change it.  How did do?

  Thank you

  J

  inside the virtual network editor set as desired vmnet2 and go with the default - or any value for vmnet3
  Close the virtual network Editor
  Open a cmd as administrator
  CD for the installation of workstation directory

  run the cmd

  start/wait vnetlib.exe - stop dhcp

  start/wait vnetlib.exe - set vnet vmnet3 addr 192.168.10.0

  start/wait vnetlib.exe - start dhcp

  the result looks like this

  

• How to configure the server Esxi 3.5 on Vmware workstation 7

  Hello

  I m new technology Vmware Esxi. I will join the formation of VCP5 next month. But before participating in this training, I would take it somewhere on the same experience. So, for this, I install Vmware workstation 7 on my home PC. I have install Esxi 3.5 server on one machine virtual workstation.

  I just edit the machine configuration file virtual vmware [C:\Documents and Settings\a48923\My Documents\My Machines\Esxi virtual-01] as shown below which is marked in "BOLD" letter.

  scsi0. Present = 'TRUE '.
  scsi0.virtualDev = "free".
  memsize = "1024".
  scsi0:0. Present = 'TRUE '.
  scsi0:0. FileName = 'Esxi - 01.vmdk.
  IDE1:0. Present = 'TRUE '.
  IDE1:0. AutoDetect = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-raw"
  floppy0.startConnected = "FALSE".
  floppy0. FileName = "".
  floppy0. AutoDetect = 'TRUE '.
  ethernet0. Present = 'TRUE '.

  ethernet0.virtualDev = "vlance.
  ethernet0. ConnectionType = "bridge".

  monitor_control.restrict_backdoor = TRUE
  monitor_control.vt32 = TRUE
  Monitor.virtual_exec = "automatic".

  ethernet0.wakeOnPcktRcv = "FALSE".
  ethernet0. AddressType = 'generated '.
  roamingVM.exitBehavior = 'go '.
  displayName = "Esxi-01.
  guestOS = "redhat".
  NVRAM = "Esxi - 01.nvram.
  virtualHW.productCompatibility = "esx".
  extendedConfigFile = 'Esxi - 01.vmxf.
  ethernet0.generatedAddress = "00: 0C: 29:32:f8:b3.
  UUID. Location = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
  UUID. BIOS = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
  cleanShutdown = 'TRUE '.
  Replay.Supported = 'TRUE '.
  Replay.FileName = «»
  scsi0:0. Redo = «»
  vmotion.checkpointFBSize = "16777216.
  ethernet0.generatedAddressOffset = '0 '.
  tools.remindInstall = 'TRUE '.
  ethernet0.linkStatePropagation.enable = "FALSE".
  tools.syncTime = "FALSE".
  ethernet0.VNET = "VMnet8.

  After you change the configuration file. I started the Esxi server. But when booting, it shows lmdriver failed to load. When I tried to configure the Exsi network, the back always prompt to reset the default settings of the network. Then I searched the internet, I found this machine NIC not to support Esxi. Is there a way to configure the Microsoft loop back adopter or any virtual adopter for esxi? So that I can install several esxi server on a single machine on vmware workstation and can be communicate with each other.

  With VMware Workstation 7 you should not need to manually configure the .vmx file. Create a new custom virtual machine and select ESX as the guest operating system. This will configure the virtual material suitable as an E1000 network adapter...

  André

• Error when installing ESXi 5 on 8 workstation

  Hello team,

  I'm dounia. Recently, I completed my training as a VCP on vSphere 5. But when I try to set up a lab in my personal pc using workstation 8, it gives the VT is not enabled on your processor error. I even checked in my physical syustem BIOS and it has been activated. I disabled it and re-enabled again. Then, turn power off and power on the same. But still the same error. I checked the BIOS settings on the operating system prompted but unable to find VT settings on it.

  I am using Windows 7 32-bit operating system

  Intel i3 processor

  I allocated CPU 2 and Core 2, GBB 50 HDD, 2 GB of RAM to the ESXi.

  Please help me!

  Thank you

  Dounia

  Welcome to the VMware communities forum.

  You will need to tweak the virtual machine a little to get VT crossed at the prompt.

  Workstation 8 / Player 4

  Virtualized HV is available for the hardware virtual version 8 virtual machines on the hosts that support Intel VT - x or AMD - V and EPT of IVR. To activate the HV virtualized, select VM-> settings and access the processor settings screen. Check the box 'Virtualiser Intel VT-x/EPT or AMD-V/IVR.' You will see a warning that virtualized HV will make this inconsistent VM with other VMware products. In particular, if this virtual computer is moved to a 5.0 ESXi host, virtualized HV is available without twist additional.

  For more information, please see this document - http://communities.vmware.com/docs/DOC-8970.

• VmWare Workstation 8 and no 64-bit support

  First of all. I'm sorry for my bad English.

  My hardware:

  ASUS Sabertooth X 58 Mainboard

  Intel Core i7 950 CPU

  12 GB of Ram

  Under a Windows 7 Ultimate (latest patches installed)

  In the Bios is VT ENABELT

  My problem is that since a little day invited VMware Server as me as my PC dosnt support 64-Bit operating system.

  Follow them Info box introduce yourself a way:

  Virtualization software is Incompatible with the long Mode on this platform, the virtual machine will not be able to run 64-bit code.

  So I have a w2k8 R2 on my server and it runns fine until the error message.

  I hope you can help me quickly while im doing certificate MCITP training and Certification tests in 4 weeks and I neet training

  Thanks a lot for your help.

  Sorry if I post in the wrong Thread.

  There are a few days ago a user had problems with 64-bit VM too well that VT has been activated. Perhaps the cause (and the resolution/workaround) are the same.

  According to Re: comments 8 and 64-bit Workstation bits in the vmware.log indicate that VT - x is turned on.

  2011 09-23 T 23: 21:35.610 + 02:00 | VMX | I120: Common: MSR 0x3a = 0x5

  Bit 0 and bit 2 are defined.

  So maybe jmattson workaround provided in the mentioned discussion can help.

  Add the following line to C:\ProgramData\VMware\VMware Workstation\config.ini:

  hv.assumeEnabled = TRUE
  

  André

• ESXi 4.1/HP DX2400 Workstation / unable to load vmsf3...

  I have an older HP DX2400 workstation. I try to install ESXI 4.1 on it. It's a job... not a server.

  When I do the installation, it hangs on:

  Could not load the module/usr/lib/vmware/vmkod/vmfs3: failure

  Other threads pointed to a NIC not supported so I turned off the NETWORK adapter in the BIOS and ran the installation... same problem.

  Before that, I started I did no compatibility check. . I just took a shot at him.

  Is this likely to be an unsolvable problem because, maybe, the motherboard? I put in a former NIC Netgear I had and had the same problem.

  If I need to I'll do this installation on an HP Proliant server and use this computer for VMWare Player.

  Thanks for pointers or suggestions - don't want to waste time in person.

  Mike Gallery

  The error indicates that ESXi has not found a NETWORK card during the installation process.  It requires a NETWORK card to use so turn off the power, we will not help.   If you have something like an Intel Pro 1000 which will help you through the installation.  Otherwise you can check out the page here for a driver who could work with your system - http://www.vm-help.com/esx40i/customize_oem_tgz.php.

  Dave
  VMware communities user moderator

  ESXi Essentials free training / eBook offer

  Now available - VMware ESXi: planning, implementation, and security

  Also available - vSphere Quick Start Guide

• What software to a workstation HP Z230 would you recommend?

  I just bought a new Hewlett Packard Z230 Workstation with the intent to catch up on a big backlog (of the hundreds of hours) of family videos, I want to clean up and change.  This computer is configured as follows:

  Intel I7 4770 Quad Core 3.4 GHz (showing 8 processors in control panel/system/processor) current execution

  16 GB of ram

  C: drive of 256 GB SSD

  3 to 7 200 RPM drive D:

  video card nVidia Quadro K2000 with 2 GB of video ram

  Windows 7 Pro 64-bit

  When I bought this, I had planned on using Cyberlink PowerDirector because they announced that it works well with the features of this computer.  I downloaded a trial version of Power Director, and it satisfied my functional needs.  But he locked up three times in an hour.  When I wrote Cyberlink, they have asked for information like the DxDiag.txt file that describes my computer and blocks Windows event logs.  Their response was BAFFLING, because they said that they design their software to "level of consumer platforms", and since they test their software on "workstations", they may not recommend my use on the Z230.

  That said, I'm now looking for other software.  I used Pinnacle a lot in the past, but it has changed so much since the version I used, I'm not married to any brand at this stage.  In addition to the usual editing capability, I want to check that the software that I buy has specific abilities, I need:

  -Ability to video clips of cultures and expand others cropped 16:9 scene (because I have a few incroachment in video excerpts from the hood of the lens of a camera).

  -Ability to normalize audio levels of the different clips (some too loud or too quiet) before producing the video.

  -You want, don't not required: ability to burn DVDs or DVD on a computer other than the one where I'm editing.

  More, if not all, editing software has these capabilities now (PowerDirector and Pinnacle do), so this shouldn't be a problem, but I just want to check.

  Any help or advice would be appreciated.

  Thank you

  Terry Quinn

  Terry,

  Sounds like a ton of frustration!

  My comments:

  • You say you have hundreds hours of videos of family; you need a professional level solution, or you will simply be driven crazy!
  • I suggest to buy Premiere Pro CS6 (expensive but permanent license) or the first Pro CC rental (monthly subscription model). These two fully use your hardware (processor, memory, GPU and whole disks) for the best possible, editing experience - I highly recommend to choose one of the two options and do not look back. With many hours of video, you want to have a platform which publishes fine without having to make each scenario over and over again just for reading and gently rub.

    [sidebar: I do not work for Adobe, I don't do that professionally and I made photo and video editing as a consumer for more than 30 years well.] Announcement over these years, I had the chance to try a lot of different hardware and software solutions (well Yes, Panasonic / Sony bridge-to-bridge linear edition on hardware Hi8, VHS, SVHS, then Pinnacle and assisted Matrox solutions PC (signs $ 1000 added to the PC to handle DV and SD non-linear editing formats) [and for the last decade, using Pinnacle Avid Liquid / / first / only Vegas software solutions])

  • Your system is pretty solid, except for the video card (empty the Quadro and get a 2 GB card NVidia GTX 770). Add a matching 3 TB HD and make a record of 2 x RAID 0 set would give you much more speed and ability too in the field of training and is an upgrade I would propose as well. You don't have a lot of video indeed!

  You absolutely must talk about what your media here to get the best advice.  Are you using editing AVCHD, DV, Hi8, etc. ? It is very important to determine the level of the CPU, GPU and drive speed that best fits your need. Not all video is similar and consumer HD (AVCHD) is radically more taxing on a PC than mini-DV, for example. Since you say that you have hundreds of hours of video, I guess you aren't in 4 k yet!

  Kind regards

  Jim

• How to replicate laboratory installation class in your vmware workstation 7

  Hello

  I have completed vSphere install and configure the class last month, but because of the short time, I couldn't much laboratory class. I do lab myself I have top of the range laptop Toshiba Tecra A11-S3540 with i7 2.24 processor and memory of 8 GB. I installed vmware workstation 7 on my laptop and I have not all ESX software for installation and the official class lab manual.

  Is it possible I can do same laboratory within the workstation in a proper way. as do I make team or do I need to install individual ESX hosts within the workstation or I'm not real lab in my computer. I know it is not possible to reach every piece of laboratory class, but at least I can do some hands on via lab. I just want to learn through formal laboratory because I just finished my training as a classroom and everything is fresh in my mind.

  I can't buy expensive server to make the lab or my hands world real opportunity.

  Any help would be great.

  Thank you

  I used the following instructions http://www.yellow-bricks.com/2009/05/08/running-vsphere-within-workstation-will-take-up-a-lot-of-memory/

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful