Transfer of personal use of Boot Camp Virtual Machine license

Similar Questions

• Merge cannot make Boot Camp virtual machine: perhaps too many places of the VM?

  I get the error message, well known in the VM library window "Bundle" & lt; pathname & gt; "" / Boot Camp/%2Fdev%2Fdisk0/Boot partition.vmware.vm Camp "is damaged and cannot be opened."   However, my problem is not solved by the solutions proposed elsewhere in this forum.

  At the bottom of this post, I listed my host config and invited desired config.

  Here is a brief history, followed by what happened when I tried the solution of WoodyZ published here.

  • I had Windows XP Pro SP2 on my Boot Camp partition, but somehow ended up 'inaccessible' SigmaTel audio device and the Leopard installation DVD could not repair it.  I imported this partition to Boot Camp in the Fusion as a virtual machine.  This virtual machine is now stored on the external hard drive in "/ Volumes/ExternHFS/_CCCnonBackup/virtualMachines/Boot partition.vmwarevm"+ Camp.»  This virtual machine still works when loading in the merger, but the sound does not work, nor made a called M-audio Transit USB connector.  That's why I decided to create a new partition in Boot Camp with a SigmaTel audio device cool.

  • There are Kubuntu and NetBSD virtual computers stored in another default folder: yangguizi/Users / / Documents/Virtual Machines /

  • Using wizard Boot Camp in Leopard, I erased my Boot Camp partition and then recreated with a new installation of Windows XP Pro SP2.  (By the way, I've formatted this partition in NTFS.)  This Boot Camp partition is the device of SigmaTel installed and accessible from the control panel.

  So I wanted to make a virtual machine of the new Boot Camp partition.  When I opened the merger, I highlighted the new Boot Camp partition down and clicked on the arrow of comments are starting to the right.  A window saying "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. "That window remained open for 45 minutes.  Finally, I closed merge by clicking the choice of menu to quit Vmware Fusion.

  Thereafter, whenever I opened the merger, I saw the message "Bundle" / Users/yangguizi/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmware.vm "is damaged and cannot be opened.' " next to the new Boot Camp partition.

  When I highlighted this new Boot Camp partition in the VM library and you press the delete key, absolutely nothing changed, that I could see.  Right click on the list of this score showed that the menu choice 'delete' is gray.

  Then I closed the merger, and then manually moving the file to the trash "/ Users/yangguizi/Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp / '.

  The next time I opened the merger, a new icon for the Boot Camp partition has been displayed at the bottom, with the subtitle "Powered Off".  When I clicked on the icon start Guest, a new folder/Boot Camp / was created in the same place, and the never-ending open window showing "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. " Blah, blah, blah.  If the cycle turned up.

  I am at a loss what to try next.  Here are three assumptions about the problem:

  1. Fusion has been confused by the three communities during which I virtual machines.

• Fusion has been confused by the fact that I have, potentially, two virtual machines called "Boot Camp partition".  The older is actually a virtual machine hard disk external.

• When I installed XP in the Boot Camp partition, the external Firewire drive was running. Then installing Windows saw much more of partitions on which XP could in theory have been installed.  This may have confused merge somehow, even if I successfully installed XP on partition C, which was 32 GB.

Did fix you this problem?  Even if you haven't, what do you suggest me I try next?

Thank you, Yang Guizi

Host hardware: 17 "MacBook Pro; 2.33 GHz cpu; 3 GB of ram; Boot Camp 32 GB partition formatted in NTFS. external hard drive with Firewire 800 interface, partitioned in an HFS volume + and an NTFS volume.
Host software: OS X Leopard 10.5.5; running VMware Fusion 2.0.1 build 128865; Tracks of partition Boot Camp newly installed Windows XP Pro with Service Pack 2.
Software comments: I would like to convert the Boot Camp XP Pro SP2 in a VMware virtual machine.        Running VMs with Kubuntu and NetBSD since the hd internal.

You can just get rid of the all/Users/lincoln/Library/Application Support / directory / Machines/virtual VMware Fusion; It should all be recreated. The virtual machine to help naos is than the pretreatment of Boot Camp. You don't want to get rid of all the of them, the only one in the specified directory. For example, there is a blank template in Applications/VMware Fusion.app whence that of your home folder.

• After update of El Capitan, Fusion 8 will not open the Boot Camp virtual machine

  Greetings!

  I'm having a problem with the Fusion 8 since my update to El Capitan.   My Boot Camp partition is functional and I can boot directly into it very well - all my files and data are intact.   However, when I try to start the machine Boot Camp in a virtual machine within OS x, I get the following error:

  Operation not permitted

  Cannot open disk "/ Administrator/Users / / Library/Application Support/VMWare Fusion/Virtual Machines/Boot Camp/Boot Camp 2.vmwarevm/Boot Camp 2.vmdk' or one of the snapshot disks it depends."   Module 'Disc' on failed.   Unable to start the virtual machine. »

  I remember a message from the update of El Capitan, indicating that it is an element incompatible Parallels and disabled.   I thought it was the components of laggard remains from when I ran a parallel trial a year ago, but perhaps it is related?

  Help, please!

  Hi gang,.

  I have a solution for this!   After I created this post, I created a ticket with support and they solved it for me.

  Here's the skinny: El Capitan has changed something wise permissions to access data files on the Bootcamp partition.  VMWare said they were working to solve this, but in the meantime they had me do made me upward and short... just remove the entry of the virtual machine Boot Camp in Fusion and recreate it.   I recommend you save beforehand in case where, but this process does not affect the data on your partition, only one definition of the Fusion of the virtual machine and how you can access your score.

• Cannot use Win8 Boot Camp partition for vm installation

  So I have a new installation of Windows 8 RTM (from TechNet!) new in Boot Camp. However, Fusion 4.1.3 both the Tech Preview will be forever stuck on 'Partition of preparation to present itself as a virtual machine

  Fusion 5 supports Windows 8 Boot Camp.

  The problem, I think you saw, a failure to "VMware Fusion is preparing to present itself as a virtual machine" can be caused by the State of the Windows registry. While I do not have a fix for this right now (us have a bug filed and work on it), I have a workaround.

  The problem occurs after the Boot Camp virtual machine has been put in place, but before it is turned on for the first time as a virtual machine. Fusion strives to insert registry keys and allow drivers to the boot device, and in some situations, it is unable to do. To work around the problem, you can add these keys and activations of pilot (!) manually, under Boot Camp itself. They do not interfere with the help of Boot Camp natively.

  If the problem occurs, you should

  (1) find the folder/Applications/VMware Fusion.app/Contents/Resources/naos-1.0.vmwarevm/reconfig.iso and open it in OS X, which will mount the ISO.

  (2) copy the 'bootcamp.reg' on the ISO file and copy it to a folder on your Mac, or on a USB key. We will have this file from Windows.

  (3) restart your Mac under Bootcamp native.

  (4) from Windows, find the file bootcamp.reg where you saved it and double click to add these settings in the registry.

  (5) restart your Mac under OS X, start the merge and recreate the machine virtual Boot Camp.

  (6) it is likely that it will fail again at the stage of the "preparation of your virtual machine", but it is more critical because the necessary settings have been added to the register already. What to do, is prevent the Fusion to remove the virtual machine when you acknowledge the failure. We will do this by renaming the virtual machine.

  (7) when the Committee alert error is displayed, use Terminal or Finder to rename the virtual computer. You will find the Boot Camp virtual machine in your home folder in ~/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp. Note that the ~/Library folder is hidden by default in OS X Lion and Mountain Lion, so the simplest to get this folder of the Terminal, no viewfinder. If you want to do the renaming via the Finder, open a Terminal window and enter the command "open ~/Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp" and Finder opens the folder normally hidden for you. Rename all of the Boot Camp virtual machine, which will prevent the Fusion to remove it as a failure, then acknowledge the alert Panel. You can rename the VM Boot Camp to 'Boot Camp', or simply drag it to the library of VM merger under the name that you gave.

• Unable to connect to the network in Windows 7 using the Boot Camp via Fusion 2.0.4 partition

  I know that Windows 7 RC is not officially supported, but I was wondering if anyone had ideas regarding my current situation.  I'm running the RC 32 - bit of a Boot Camp partition, via merger on a unibody MacBook, and whenever I'm in Fusion Windows cannot connect to my network.  Previously, I had a vm file-based and it worked normally, and in Boot Camp, I can get online without problem.  I went to training Camp to see if the Aero effects would work (they did after I ran the test of Windows experience).  I tried mode Bridged and NAT and any Windows does not see my wireless network.

  At the time current Windows 7 in any version is not supported by Apple on the Boot Camp partition, nor is it supported in any way under Fusion.

  Take a look at the configuration of the Virtual Machine's .vmx file and make sure that the NIC is showing that "e1000" as in the following example.

  ethernet0.virtualDEV = "e1000"
  

  To get the location of the Machine configuration file virtual .vmx take a look at the Beginner's Guide has VMware Fusion or gather Information for VMware Fusion.

  Note: You should make the change while Windows is shutdown, not suspended and merger closed.

  You can use TextEdit to edit the .vmx of the target Virtual Machine configuration file and locate the file...

  VMware Fusion (menu bar) > help > VMware Fusion help > navigation in VMware Fusion > using Virtual Machine library window > determine the location of the files from a virtual machine

  VMware Fusion (menu bar) > help > VMware Fusion help > using the Interface of VMware Fusion > work with Virtual Machine packages

• The two OSX/FAT partition in disk - which uses a Boot Camp?

  Hello

  I have an external drive with both OS X extended and FAT partition to which I am ready to use it to install Windows using Boot Camp. The problem is that I have important data in OS X partition and I was wondering if I use this specific hard disk, Boot Camp use, format and writing Windows only in the FAT partition or formats the disc?

  PS. I don't have USB extra flash available

  You will need to re - think that BootCamp Windows installations do not work on an external drive

• How can I disable the Windows of Parallels key for use with Boot Camp instead (same Mac)?

  I have a Windows 7 key I used with Parallels (on my Mac). I was unable to uninstall Parallels, and now I want to use my key Windows with Boot Camp instead. How can I turn off the key to the prior use (same computer)? Is this possible?

  Unfortunately, I am not able to return to Parallels. (I upgraded my Mac o/s to an incompatible version with the version of Parallels, I had installed).

  Thanks for the suggestion, if!

  I'll try MS service the customer the morning... wish me luck!

  Just proceed to install Windows 7 in Boot Camp and reactivate by telephone by following the instructions.

• Transfer data from the laptop to the Virtual Machine.

  Hello

  I'm trying to transfer some data from my laptop to a virtual machine. This virtual machine is not in a domain or network. Not assigned an IP. How can I transfer files? I tried to mount VM to the local data store, but she only accepts ISO files. I'm trying to transfer files .txt and the .vbs file. Any idea?

  Kind regards

  ZaraRose.

  If you are dealing with just text files you can activated copy / paste via the vSphere client - kb.vmware.com/kb/1026437.

• Configure a DNS SERVER to use SCANNING for Solaris virtual machines

  Version of the grid: 11.2.0.3
  Planning of a two node RAC cluster
  
  I create a CAR with Solaris VM setup in my office. Although a virtual machine configuration, I don't want to use the file/etc/hosts for name resolution that I will completely test SCAN. That is to say. All the ANALYSIS VIPs turning way responsive when nslookup is run.
  
  I can do one of my 2 RAC nodes a DNS server?
  
  If anyone has any document on Linux/Solaris, please let me know.

  Hello

  technically Yes, but it won't help you in a way. If the node with the DNS server dies your cluster will not work properly more.

  However, for a test cluster, you don't need DNS. You can simply stay with 1 address for the SCAN, which is quite enough (for the test, no production). No need to go through the DNS installation. It would be an exaggeration to this configuration of VBox.

  Concerning
  Sebastian

• Esxi can be used for clustering of Virtual Machines?

  I investigated the esxi features 4 creating and MS various based OS servers running a test environment.  After some success by using the virtual machine, I'm struggling now to build a cluster SQL because I can't find how to get the 2 nodes to see the same disk resource.  I've created 2xHDD in a separate folder in the data store and then can point the virtual machines on the discs but I can't use that one node at a time, it won't let me share the drive.  Back to my default position, "I do something wrong", I would really like to make this work if possible.

  Someone already looked at it and what I have to buy plug-ins to operate?

  Check this: http://www.vmware.com/pdf/vsphere4/r40_u1/vsp_40_u1_mscs.pdf

  Follow the steps exactly as described. Any help, you need to let us know.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Chief Executive Officer of the Linux server

• Servers running on virtual machines licenses?

  Hi all

  I have a question on the implementation of license on VMware ESX 3.5 VMs servers.  Some applications have licenses FLEXLM is fixed on the MAC address of physical servers or USB dongle on the server.

  If I intend to move these physical servers to virtual how changes in regimes licenses for these applications?

  Previous experiences on the same will certainly help. Thank you.

  Concerning

  Sirot

  Yes, we run license servers in virtual machines.  For license servers that are associated with the MAC address, you can statically configure the MAC to a virtual computer, but the license server will need to be updated with the new MAC address.  For license servers that use a USB dongle, USB Anywhere of Digi is the best route and we are currently using this solution.

• Transfer line to use with POS credit card (Machine (Ingenico 5100) SPA3102 FXO to FXS SPA122

  I do the installation on the transfer line to another point using wireless devices, I make and receive calls without a problem, calls in and out functional.

  I give the word to the POS credit card number and the machine, answered the call.

  When I put the credit card Machine (Ingenico 5100 and other makes and models), say equipment, the call is not the answer.

  But if I make the call with a phone, I can hear the tone of the response, as a fax, on the other side.

  I'm trying to ECO, modification, but responded well.

  Any help?

  Thanks, Conrado Szulzyk.

  ----------------------------------------------------------

  ----------------------------------------------------------

  I made the config para una linea a otro punto using transfer enlaces inalambricos, puedo hacer y recibir llamadas sin problemas. Llamadas funcionales.

  If yo name is al telefono del sistema Québec marcaria number Terminal POS de Tarjetas de crédito, the llamada're contestada.

  Cuando coloco el equipo tarjeta Credito POS (Ingenico 5100 y otras marcas y modelos), el equipo informed that the llamda're not contestada.

  Pero, TR realizó llamada using UN telefono, is cuando escucha is contresta, el tono similar a una Máquina fax desde el otro lado.

  He probado y have changed the config del ECO, pero no tuve buenos resultados.

  Alguna ayuda?

  Gracias, Conrado Szulzyk.

  Sending digital data in an analog format via voip can be very difficult.  This is because the data must be converted into a digital format for transmission and then at some point convert analog back.  Conversions must be very precise.

  In addition, the sending of credit card data that is not encrypted via voip could violate the security of the credit card industry requirements.

  Sending data via voip is a bit similar to send a fax over voip.  The SPA3102 and Guides of Administration SPA122 have sections recommending special settings for sending fax via voip data using the G711 codec.

  SPA3102 Administration Guide: (page 50 step 1, step 2, step 3)
  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/csbpvga/ATA/admin...

  SPA122 Administration Guide: (page 136-137 step 1 to step 6)
  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/csbpvga/spa100-20...

• using psshutdown.exe cause virtual machines to be "in use".

  Hi all

  We have a pool of custom docking station that uses the PStools command psshutdown.exe to kick a user on a bound of Windows XP desktop to cloned after 2 hours. The problem is, it seems that the virtual desktop will eventually be registered as "Already used" and becomes unusable until delete us it (and it gets rebuilt). The command psshutdown.exe did something out of the ordinary that does not detect view? Can support because it added?

  Thank you

  You try to refresh on logoff?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1000590

• Using Boot Camp Partition

  When I'm in the Virtual Machine library I press the start upward on my Boot Camp partition and this message

  Cannot open disk ' / Users/rickyoder/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on.     Reason: The partition table on the physical disk has changed since the disk was created. Remove the physical disk of the virtual machine, and then add it again. »

  How can I fix this so that my Bootcamp will work?  I tried to click on rt and remove the boot camp partition, but this option is grayed out and wont allow.

  Thank you

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition (without a snapshot *) and if you have changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.  * Note that Fusion 2.0.0 may accidentally have a snapshot with the partition Boot Camp, Virtual Machine, and it should not have then you should check to ensure that the condition does not exist as well.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also be sure that you copy the entire command below "rm" line at the beginning of the "(quote) after the p in the Camp of. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion.app) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• Newbie installation window vs virtual machine virtual Boot Camp

  HI: is there a document/link that describes the difference, and what benefits the Boot Camp virtual machine has?

  Thank you

  Ravi

  Take a look on: choose the right virtual computer settings