Transfer of SELECTED in the photo gallery on a flash drive or SB photos

Similar Questions

• Unable to save the connection Wireless to a flash drive

  I'm saving my connections without wire of a machine so that I can import them on another. I use the wizrad to Windows 7 and I'm to the point where I hit next to export or copy the settings on an external drive. Once I have click on next to start the copy I get an error that says:

  Impossible to copy the settings to the USB flash Drive

  Windows cannot save your network settings on the flash drive.

  The flash drive is visible in Windows Explorer and I can copy files it it.

  -Russ

  Hi Russ,

  Thanks for posting your question in the community of Microsoft Windows.

  From the description of the problem, it seems that you can not save the settings of the wireless connection to a flash drive.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  I suggest save wireless settings using Netsh commands to export a profile wireless existing to a XML file, then import the wireless profile settings stored in the XML file on another computer.

  Follow the steps in the link below to import and export wireless profiles.

  Import and export wireless profiles:

  http://TechNet.Microsoft.com/en-us/library/dd283011 (v = ws.10) .aspx

  Note: This also applies to the Windows 7 operating system.

  If the problem persists, I suggest you to ask your question in the Technet forums to get help from the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Transfer a portion of the photo library

  Hi all

  I am currently using a MacBook Pro 2013 Yosemite 10.10.5 running. I have 750 GB of internal storage, but it is almost full. Most of this storage is filled with photos and videos. I bought a 2 TB external hard drive and partitioned it, one for time machine and the other for storage. I have over 300 GB of photos and videos, some of them dating back to 2008. I don't want to send all those pictures in stock, everything up to the last year. (time machine has everything saved anyway) I tried to do this manually, section by section, but it became a right mess. The files were being duplicated in the external hard drive, sometimes up to 8 copies of the same photo. The order went all out of sync even when put in order of date, and some pictures have the same name. I found the instructions on how to move a whole library on an external hard drive, but then I got confused about this becomes your default library or something? I don't want to change the default location of the library, I want to just put a little library in stock, without making a mess. Anyway, I guess my question is the following:

  1. How can I move that part of my library of Photos on a hard drive external, at once, without losing the order and without the hard drive of my library by default?

  Also, I liked iPhoto. I didn't know it at the time, but now we have pictures, I love iPhoto. When he updated a year ago I just left, because I assumed that it had to be this way. Now that I try to spend it in stock I realize even once how the poor Photos, if...

  2 is it too late to return to iPhoto? If I do how I move all the newly imported (last year) photos in iPhoto as well?

  I wouldn't say my technical abilities on the Mac is that great at all so any help is appreciated.

  See you soon

  1. How can I move that part of my library of Photos on a hard drive external, at once, without losing the order and without the hard drive of my library by default?

  Drag your photo library on your external drive, and you'll have a copy. You can switch between libraries by pressing the options then you launch Photos. Allows you to select the library you want to open.

  . I don't want to send all those pictures in stock, everything up to the last year. (time machine has everything saved anyway)

  You know that Time Machine will remove the older items in the backup, if she needs to release new backups storage?  If you the elements removed from your computer, they do not stay on Time Machine forever. What is your Time Machine partition? It must have at least 2.5 times the size of the disk of your Mac system. This will ensure that backups do not get deleted so quickly.

  And Time Machine backup impossible a second partition on the same drive. It would be better to move the copy of your photo library to a separate data disc, not a partition of data on your Time Machine disk, so time Machine can include in the backup, and you'll always have a backup of the photos that you moved out of the internal drive.

  2 is it too late to return to iPhoto? If I do how I move all the newly imported (last year) photos in iPhoto as well?

  you will quickly become frustrated with iPhoto too. Apple is no longer supports. You can order is no longer iPhoto print products. So, it can break completely.

  To resume work with iPhoto, you must upgrade to iPhoto 9.6.1.

  You can only update iPhoto iPhoto 9.6.1, shows among your purchases on the App Store. Check the tab fourth appstore - purchases.  If you see iPhoto you can update by removing iPhoto in the Applications folder (do not empty the trash), then restart the App Store and click on "install". To install iPhoto 9.6.1.

  Tip to see Barney:

  Can't update iPhoto because it is not available in the App Store.

  To move your latest photos to iPhoto export them photos and import it into iPhoto.

• How can I select all the photos to download icloud on a Mac?

  I do the thing IT Manager family.

  My daughter moved into a House with the lousy broadband (0.5Mbit / s!).  She had already signed for storage iCloud and used pictures of iCloud for several years with his iPhone & iPad.  She has now a large number of photos & videos (ex iPhone & iPad) in iCloud, but also a large number of old photos in her photo album on his MBP (which she didn't register to iCloud Photos with).  I would get all of his photos on iCloud and in Photos in his MBP, and she can stop trying to use the thing iCloud until she gets a better broadband connection (and just sync with USB, in the traditional way!).

  I use iCloud Photos myself and find it very confusing - iCloud Photos, photo, pictures of iCloud sharing stream...

  However, I don't see an easy way of simply by downloading everything.  If I access iCloud Photos via Safari, I can download photos, but there seems to be no option "Select all", then by selecting several hundred photos will be tedious say the least.

  If I sign his MBP Photos up to iCloud, it goes, I guess, download all her photos to iCloud, ok, BUT, it will automatically download all her old photos on iCloud and probably exceed its storage limit, but also take a long time (45 GB - if I have fiber at home, so perhaps tolerable).

  I did a little research and can find no easy answers.  One possibility is to create an empty photo library on the MBP, sign up to iCloud, wait for synchronization, the export of all photos in a folder, re-import the old library of Photos and then delete again.  Seems possible, but tedious.

  All the best ideas?

  FWIIW, my daughter MBP is a mid-2009 13 ", just updated (by the family IT Manager!) to el Capitan. a little slow and only 250 and only 70 GB available.

  Go to a place where the internet is faster. Turn on iCloud photos on Mac.

  This will put all the photos in the cloud and on Mac.

  Once done, turn off iCloud photo library.

• selection of the photo with modified metadata

  I do not automatically let lightroom save metadata in the original photo.

  When I want to ave the metadata changed hand. I have to get the photo with modified metadata.

  y at - it an option to search with modified metadata that are not downloaded int of the original photo.

  Why not create a smart collection?

  

• The PDF files on my flash drive went to the photo manager

  I've stored pdf files on my flash drive.  These files always have proof these are pdf files and I could open them.  Al of a sudden, today, when I opened my flashdrive these pdf files have been in my pi8cture Manager and when I go to open it appears aone of my picture files.  I can't open the pdf file.  Please notify.  I have not changed anything.

  Hello

  Define PDF Adobe Acrobat files, or one that you use to open PDF files

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error code 0 x 80070052 when copying the jpg files in a flash drive

  Original title: Why can't copy some files to a flash drive jpg when the rest were ok?

  Here are the pictures taken during a trip. Never had a problem before. Error code 0 x 80070052 came

  Hi SylviaT Springs SA,
   

  0 x 80070052 - ERROR_CANNOT_MAKE the directory or file cannot be created.

  It is a known issue with a variety of USB drives.  You can put only a limited number of photo files in the root directory.

  Follow the steps in the post below and check if it helps to fix the problem:

  error copying file 0 x 80070052

• Try to install Windows 7 from the SanDisk USB 3.0 Flash drive...

  I spent days trying to find a solution to this, but nothing helped. I am trying to install an image pre-configured on a new Dell Latitude E5530 and Dell Precision T3500 (our two standard workstation deployments). At the prompt 'Where would you install windows?', I chose the disk/partition and get a message "Windows Setup could not create a new partition system.

  Before I begin to explain - I made this configuration will leave if it is thousands of times with disks USB 2.0 without problem. (It installs custom and preconfigured win 7 for an enterprise environment.) The images we use are fine - they work with other USB 2.0 readers)

  Material:

  Dell Latitude E5530 / Dell T3500

  128 GB Samsung SSD (Dell OEM) / Western Digital 320 single disc and two disks in RAID 1 (RAID Intel)

  Installation drive: SanDisk Extreme 32 GB USB 3.0 Flash Drive

  Software:

  Windows 7 32-Bit Enterprise Edition

  -Pre-configured image and answer file, custom (install.wim)

  Here's what I've done previously. None of this worked at all:

  • Clean the disk target (SSD) with diskpart (own > create > active > format (NTFS) > attribute).
  • Clean the installation USB 3.0 drive and install re-copied the file several times.
  • Cloned the installation drive USB 3.0 from a well-known work 2.0 USB drive.
  • Addition of the latest Intel USB 3.0 Boot.wim in the USB 3.0 drivers installation disk.
  • Tried manually navigate and load the drivers of intel USB 3.0 while the selection of drive / configure screen (they seem to load but the error persists)
  • Boot order set to the target drive / array at the top of the list
  • Off the other boot devices.
  • Operation change of SATA (AHCI, SATA, RAID, etc.)
  • I tried different ports USB 3.0 and 2.0.
  • Tried with laptop in itself and dock.

  It seems that the Windows 7 installer will not work on this USB 3.0 flash drive anything (not even on 2.0 ports). Each search than I on this subject shows results that relate to an upgrade install or simply clean the score target and marking as active (what I've done, and what does not). I can't, for the life of me, understand what the limitation or the problem, it is that is causing these installs do not work.

  I don't have the option to try different USB 3.0 drives. Any help is greatly appreciated.

  HI Maria,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  It will be useful.

• How to synchronize changes in the iMac to an external flash drive

  Without using a 3rd party application, is it possible to synchronize changes made to my iMac documents and data on an external drive such as a flash drive? I use Time Machine, but I want to connect via a usb cable flash drive in the iMac, such as changes I made one of my documents will automatically flash player to activate and make the same changes on the documents that are in the flash player.

  Not as part of the OS x Time Machine does not have a mirror copy of the backup computer. So what you have is just a backup that can be restored using the application Time Machine.

  There are many utilities of third parties who may perform scheduled backups, incremental reflecting the main hard drive.

  Recommended backup software

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files.

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!

• The data on my Lexar flash drive can be read by a mac if its windows?

  My lexar USB data can be read by a mac, if it's windows?

  Hello

  Yes, it will read the data of a Lexar USB drive.

  Kind regards.

• When I attach my USB to one of my USB ports, I get a message that says "unknown device". However if I plug my mouse and my keyboard in the same USB port it works fine... What do I do? Need HELP I have the info out of my flash drive...

  I need to download a driver?

  It would be difficult to say that you haven't told us the manufacturer and model of the flash player.
  Neither you told us what version, edition and level of service pack of Windows® you are running.
  All of the above information is important to answer your question!

  Please note, however, that in Windows® XP Service Pack 3 , drivers are not necessary for newer flash players.  If you have not upgraded to the SP2 minimum, you can have trouble reading flash drives.  Download and installation of the SP3 may solve your problem.

  In addition, your hardware supports USB 2.0?  If this isn't the case, you may need to install a separate USB controller to use flash drives.  See the documentation for your system.

  If you have SP3 and your hardware supports USB 2.0, answer these questions and we will take it from there...

  No member of this forum is omniscient.  You just have to tell us about your hardware.  
  In addition, Please read KB555375 - how to ask a question

• How can I recover the files from my USB Flash drive before it will be deleted?

  My USB Flash drive has files on it from another computer and only the files that have been stored on the flash drive which cannot be recreated. How can I recover the files? The Flash Player is telling me that it must be reformatted and the files will be deleted. It's two computers I use. Help, please

  Hello

  Looks like it might be a problem with the flash player.

  Step 1: Try to use the USB stick on another computer or a different USB port.

• How to recover a W7 OS on the new HARD disk USB flash drive?

  I have my Dell Inspiron 1545 laptop friends. HARD drive have a lot of bad sectors, but it was fun to do:

  • a copy of the image of recovery dell USB flash drive via Dell Backup and Recovery Application
  • a copy of the very important files
  • and a copy of the 2 partitions to each image using Acronis True Image application file:
  1. FAT16 Pri 39, 19 MB FS: FAT16 Partition: 0xde (EISA configuration)
  2. Pri, Act 14.65 GB NTFS RECOVERY

  RECOVERY partition have the same content, such as a usb flash drive with I used to do a recovery Dell image.

  If she buys a new drive HARD this what should I do/use to recover Windows 7 from a USB?

  PS. I have nothing to lose and I try to play with the hard drive has failed.
  First of all I do partition of LBA 0 to 80 GB first where bad sectors and hide this partition.
  Then I do these partitions 2 "dell" and the rest for system files.
  Then I recover these partitions of 2 "dell" using Acronis True Image.
  Then I use a usb flash drive to recover Windows 7, it retrieves for maybe 10 seconds and he said that, please restart.
  When it shows BOOTMGR is missing, press ctrl + alt + delete and now I see only 2 partitions labeled OS ~ 298 GB and RECOVERY ~ 2 GB.

  The problem is resolved.

  The best solution is to use ImageX 2.0 to extract file Factory.wim partition RECOVERY or USB flash drive. Just search on google. New installation of operating system is also an option - I know about it. Fortunately, this Dell factory contains no useless software.

  Thanks for all the help!

• Can not upgrade the system image on a flash drive

  I am running Windows 7 on an Optiplex 780 desktop computer.  I want to put the image of the system and a repair on a flash drive disc.  The choices seem to make it impossible.  Is there a way to do this?  Is this a bad idea?  If so, why?

  Thank you

  Jan

  Hi Jan,

  I'm not an expert on the subject by any means, so I could be wrong (and I hope someone will correct me if I am) but I don't think you can do this on a single USB.  I think, because both the iso image and the repair utility both must be bootable on USB port, it won't work.   At least, not easily.  There may be some company out there that offer this feature, but basic Windows Imaging and repair utilities, I don't think it will work.

  I did a google search and could not find someone announces a way to do it on a single USB key.  It could be simply the keywords I used.

  Mainly looking to have a simple USB for use in a large number of 780s installed?

  Todd