Transfer of Variables

Similar Questions

• Pass Variables from Flash to PHP

  Good day nice webmates. I hace this situation:
  
  I created a couple of text fields in flash "check in" and "check out" to a small reservation system, where the user is supposed to enter data (two variables) and then those two dates should go to the next page of PHP (which is already done) and work with this date and other new variables... but I'm not who is the best way to "transfer" these variables of the flash in the php file...
  
  I would appreciate your answer, this is a very urgent question... Thanks in advance!

  Citations are missing inside of $_POST. It should be $_POST ["checkin"]

• SetCtrlVal used during the Thread function works causes memory leaks

  I am writing a program that works if... Or not work if... - see the next lines... :-)...

  The program includes a section, mostly GUI - and User Interaction.

  The other part is a DLL. In the DLL we readings on an external consultant controller RS232. Sometimes the controller card needs (called how much) time and this time must pass then the result can be read card controller... and so on...

  Blocking is not GUI-user-program for the expectation of the return value of the DLL functions (which need a few seconds to be finished) I start a thread in the DLL with

  CmtScheduleThreadPoolFunction (DEFAULT_THREAD_POOL_HANDLE, THREAD_FunctionX, & tmpTFP, NULL);

  with "tmpTFP" as an instance of type "TYPE_THREAD_FUNCTION_PARAMETERS":

  typedef struct
  {
  //
  int IntVal1;                // 1. Integer-Wert
  int IntVal2;                // 2. Integer-Wert
  int IntVal3;                // 3. Integer-Wert
  int IntVal4;                // 4. Integer-Wert
  int IntVal5;                // 5. Integer-Wert
  //
  int IntBuffer1 [32];            // 1. Integer-buffer (aktuell genugt einer)
  //
  Double DblVal1;                // 1. Double-value
  Double DblVal2;                // 2. Double-value
  Double DblVal3;                // 3. Double-value
  Double DblVal4;                // 4. Double-value
  Double DblVal5;                // 5. Double-value
  //
  char CharVal1;                // 1. (Single)- Tank-Wert
  char CharVal2;                // 2. (Single)- Tank-Wert
  char CharVal3;                // 3. (Single)- Tank-Wert
  char CharVal4;                // 4. (Single)- Tank-Wert
  char CharVal5;                // 5. (Single)- Tank-Wert
  //
  char CharBuffer1 [1024];        // 1. Char buffer (akutell einer genugt)
  //
  } TYPE_THREAD_FUNCTION_PARAMETERS;

  In the GUI-user program - I get fast by default-return value of the thread start function.

  Then I asked the DLL (some global state variables are used for this) when it is finished.

  According to the map-controller (RS232) contacted the waiting time depends on the 'mood' of the controller card.

  In the DLL-mark of the GUI-user-program routine now everything works fine - without using "SetCtrlVal!"

  In my GUI, there is a text box of the info/comment for messages. If I do a few outputs user using 'SetCtrlVal' I always errors, caused by the false "TYPE_THREAD_FUNCTION_PARAMETERS"-values in the service of thread. "» If I set a breakpoint at the beginning thread-function I see mostly erroneous values in my transfer structure variables. If I put a breakpoint in the thread-function-calling 'CmtScheduleThreadPoolFunction (...)"and at the beginning of the thread values are (mostly) correct!

  I tried several and different things - but:

  If I ONLY (!)  Commenting on the (!) of a line with "SetCtrlVal", the program works, all States are asked out of the DLL.

  If I replace the "SetCtrlVal" with a written record-file function clean everything works fine and after completing the program I can look at the log file and see all the user information. BUT with 'SetCtrlVal' instead or set or (...) it does not work.

  My description is maybe not entirely clear, but believe me: only ONE line the «SetCtrlVal "line - should be commented out to let the program run properly!»

  Because if the line "SetCtrlVal"is program-user-GUI, after the call to the thread in the DLL, the DLL-memory seems to be corrupted by the call "SetCtrlVal" in the user-GUI program.»

  Best regards

  F.

  There may be a problem in your structure that your variable is set.

  You said that, after the address of the variable in the thread function the appellant one ends. Now, as you can read help each value passed in parameter threadFunctionData of the layed function must point to an area of memory that persist when the fuction is running: If your variable is defined at the level of the functions it is not valid when the thread runs since the appellant finished and released its local memory.

  Your approach with a global variable is a valid alternative, but if it is the solution, you will find data passed to the thread function must be valid for all his life.

• Should be simple but...

  Hello world

  I'm obviously new to this.  I'm doing a data calculator that takes on a single page and print a calculation on another page using a navigation components.  IE, if the user between 1 and 3, qml, page 1, the program add them and print '4' qml page 2.  The problem is that I can't figure out how to transfer my variable that contains the response of a page to another qml.

  Thanks for any advice.

  Jon

  This should answer your question: http://bbcascadescode.tumblr.com/post/40740528163/stack-of-screens-passing-information-around

• the form of course update the user field value

  Can experts tell me if we can retrieve the data from the form of courses and update the user field. If so, please could you tell me how to do and a simple example will be useful.
  
  Thank you very much

  Write an adapter to transfer and pass the value of the form attribute of the user

  How to create a transfer adapter: -.

  Name of the adapter:-adapter task of transfer process
  Adapter type:-treat stains
  Description:-adapter task of transfer process
  Variable:-determination of entry (of Type String) during execution
  Task of the adapter:-logical task... Adapter--> Variable defined return value--> entry
  Save... Build... Compile...
  For example, you have created your adapter generic transfer...

  Suppose that your Mobile is stored in the field of process form Mobile...

  In the process definition, create a task... Set the task to transfer adapter process...

  entry--> process Date--> Mobile
  Return value of--> user definition adapter--> Mobile...

  It is a very convenient way of transmission data Mobile Process to user profile without writing any custom code

  Mark if you find it useful, useful...

• Move the task to process Iplanet user does not

  Hello
  
  When I'm by assigning a new organization to the user through the user interface, then the user does not move the body selected through the user interface.
  I checked the history of the resource and it shows that the task "Move user" process got triggered but the status of the task is rejected.
  
  I get after the logs on the Console of the IOM:
  
  USEXLORG running
  Target the class java.lang.String =
  Running ISSSL
  Target the class java.lang.String =
  MODIFYUSER running
  Target class = com.thortech.xl.integration.iplanet.tcUtilIPlanetUserOperations
  < 2 November 2012 15:11:32 IST > < WARNING > < oracle.iam.callbacks.common > < ARA-2030146 > < [CALLBACKMSG] are present for this eventhandler async to policies?
  : false >
  USEXLORG running
  Target the class java.lang.String =
  Running ISSSL
  Target the class java.lang.String =
  Running MOVEUSER
  Target class = com.thortech.xl.integration.iplanet.tcUtilIPlanetUserOperations
  < 2 November 2012 15:11:33 IST > < error > < XL_INTG. SJSDS > < BEA-000000 > < =.
  =======================================>
  < 2 November 2012 15:11:33 IST > < error > < XL_INTG. SJSDS > < BEA-000000 > < com.thortech.xl.integration.iplanet.util.tcUtilLDAPOperations: createObject(): impossible
  Create the object [LDAP: error code 68 - entry already exists] >
  < 2 November 2012 15:11:33 IST > < error > < XL_INTG. SJSDS > < BEA-000000 > < =.
  >
  
  -----------------------------------------------------------------------------------------------------------
  
  Please suggest what is causing this problem and how to fix it.
  
  Thank you

  The processInstanceKey can be found while performing the mapping :---> map

  Data processing--> of Process Instance

  Even the user key can be found just by running the adapter mapping: -.

  Definition of user--> user key

  Or the best approach would be:-create a process task adapter for the transfer of the ORGANIZATIONAL unit of the profile to your process... It is a generic and commonly known adapter as a transfer card:-

  How to create a transfer adapter: -.

  Name of the adapter:-adapter task of transfer process
  Adapter type:-treat stains
  Description:-adapter task of transfer process
  Variable:-determination of entry (of Type String) during execution
  Task of the adapter:-logical task... Adapter--> Variable defined return value--> entry
  Save... Build... Compile...
  For example, you have created your adapter generic transfer...

  Suppose that your new ORGANIZATIONAL unit is stored in the USR_UDF_NEW_OU field.

  In research, USR_PROCESS_TRIGGERS, give entry: -.
  USR_UDF_NEW_OU change of ORGANIZATIONAL unit

  In "iPlanet user" process definition, create a task to '' change OR... Set the task to transfer adapter process...

  entry--> user definition--> OU
  Return value from adapter--> process data--> organization name...

  It's a great way to convey the new OU of the user profile to process data name of the Organization, without writing any custom code

• Query PHP to HTML data movement

  Howdy all,

  Noob again question.

  I spent the last month working on a bunch of HTML pages, and with your help, I was able to get well enough to the CSS, positioning, formatting etc.

  I am very satisfied with my 20 pages or more and the ease with which they can now be handled.

  So I'm ready to kick up a notch, and this weekend began to my configuration database and created a single table.

  I am able to hit my server, open the db, do a query and display the results on the screen empty (hooray!).

  BUT! Enter this 'trick' of the DB in my HTML pages is another story.

  This morning I tried the page next and after a small jump, got to work.

  But please don't tell me that I have to write all of this PHP code for each of the variables on my pages

  There are "dummy" variable I can use - $query = htmldummy; htmldummy goes into a div or < td >?

  Is there some javascript that I can use to transfer MANY variables read the DB to HTML?

  Can I register any html or php pages?

  You have any ideas?

  Again, if you can just point me in the right direction, I would be very grateful.

  Tim

  < html >
  < head >
  < style >
  {.testtable}

  Width: 200px;
  background-color: aqua;
  border: 1px solid black ;}
  .TestTable td {}
  text-align: center;
  border: 1px solid black ;}

  < / style >
  < / head >

  < body >
  < table class = "testtable" >
  Table of Test of MySql < tr > < th > < /th > < /tr >
  < tr > < td >

  <? PHP
  $host = "host.host.com";
  $user = 'username ';
  $password = "password";
  $dbname = "64140_easyemr";
  $cxn = mysqli_connect($host,$user,$password,$dbname);
  If (mysqli_connect_errno()) {no echo 'No connection'. mysqli_connect_error() ;}}
  $query = "select * from where administrative lastname = 'gould" "; $result = mysqli_query ($cxn, $query) or die ("could not do 2');
  While ($row = mysqli_fetch_array ($result))
  {
  echo "{$row ['name']}";
  }

  mysqli_close ($CXN);
  ? >

  < table > < /tr >
  < /table >
  < / body >
  < / html >

  Save pages with the code server in them like .php side.

  the .htm or .html pages did not analyse the data unless your host has set up your server to read pages .html as if they were .php.    According to my experience, it is much simpler to use only the .php extension.

  Nancy O.

• Help with mail form...

  Is someone can you please tell me why when I submit this form it gets stuck on the framework "sending" instead of moving forward on the frame to 'recognize' as it should?  The code is located near the bottom... "if(this.sent == OK)" blah blah blah... "  Tried for hours now and I'm sure its something simple...

  
  

  Stop();

  create a table
  var favarr:Array = new Array();

  fill the area of the drop-down list by using the budget table box
  favarr.push ({data: "", label: "select one"});
  favarr.push ({data: "$0-250", label: "$0-250"});
  favarr.push ({data: "$250 - $500 ', label: ' $250 - $500" ""});
  favarr.push ({data: "$500 - $1000", label: "$500 - $1000"});
  favarr.push ({data: "$ 1000 +", label: "$ 1000 +"});
  end budget area

  square services
  create a table
  var favarr1:Array = new Array();

  fill the drop-down list by using the table area
  favarr1.push ({data: "", label: "select one"});
  favarr1.push ({data: "Basic website", label: "Basic website"});
  favarr1.push ({data: "Dynamic Site (Flash)", label: "Dynamic Site (Flash)" "});
  favarr1.push ({data: "E-commerce", label: "eCommerce Site"});
  favarr1.push ({data: "Redesign of the Site", label: "Redesign of the Site"});
  favarr1.push ({data: "Site update / update", label: "Site Upgrade/Update"});
  favarr1.push ({data: "graphic / Logo Design", label: graphic/Logo Design"" "});
  favarr1.push ({data: "Business card Design", label: "Business card Design"});
  favarr1.push ({data: 'Other', label: 'Other'});

  
  services.dataProvider = favarr1;
  services.setSize (150, 20);
  box end services

  budget.dataProvider = favarr;
  budget.setSize (150, 20);

  create the function of form validation
  function checkform (): Boolean {}
  var missing: Boolean = false;
  
  validate the name
  If (fname.text == "") {}
  errortxt1. Text = "enter a name."
  Missing = true;
  }
  else {}
  errortxt1. Text ="";
  }
  
  validate email
  If (Address.Text.IndexOf("@") ==-1) {}
  errortxt2. Text = "enter an email";
  Missing = true;
  }
  else {}
  errortxt2. Text =""
  }
  
  Validate details
  If (details.text == "") {}
  errortxt3. Text = "enter in the details."
  Missing = true;
  }
  else {}
  errortxt1. Text ="";
  }
  
  If there is true false return
  missing return? false: true
  }

  Create the function that sends data
  function submitdata (): Void {}
  var formok:Boolean = checkform ();
  var message: LoadVars = new LoadVars();
  var messageget:LoadVars = new LoadVars();
  var urlpath:String;
  
  {if (FormOK)}
  message.fname = fname.text; transfer php variables entails now $_POST ["fname"];
  message. Address = address.text; transfer php variables entails now $_POST ['address'];
  message.timeframe = timeframe.text; transfer php variables entails now $_POST ['calendar'];
  message.budget = budget.selectedItem.data; transfer php variables entails now $_POST ['budget'];
  message.Services = services.selectedItem.data; transfer php variables entails now $_POST ['services'];
  message.detailsbox = detailsbox.text; transfer php variables entails now $_POST ['details'];

  
  
  message.sendAndLoad ("mailscript.php? ck =" + new Date () .getTime (), messageget); php code send and send result back to Flash. The? CK =... bit is to ensure that the server does not send data old return rather than new data, it is a killer of cache parameter (ck)
  gotoAndStop ('sending');
  
  messageget.onLoad = function() {}
  
  if(this.sent == OK) {}
  gotoAndStop ('acknowledge');
  }
  else {}
  if(this.sent == Failed) {}
  gotoAndStop ('failure');
  failuretxt. Text = this.reason;
  }
  }
  }
  }
  }

  
  backbtn.onPress = function (): Void {}
  gotoAndStop ('theform');
  }

  submitbtn.onPress = function (): Void {}
  SubmitData();

  }

  Unless it is OK, it is a variable that is defined somewhere that you do not appear, there is also a string and must be cited...

  messageget.onLoad = function() {}
  If (this.sent == "OK") {}
  gotoAndStop ('acknowledge');
  }
  else {}
  if(this.sent == Failed) {}
  gotoAndStop ('failure');
  failuretxt. Text = this.reason;
  }
  }
  }

  If that doesn't resolve questions, try tracing the value of this.sent before that test... trace (this.sent);

• How to use network variables to transfer data structure C?

  I found a CNVStruct in CNVDataType.

  When calling "CNVCreateScalarDataValue" I always get a message error "the data type is incorrect.

  typedef struct TestType_t {}
  float2 int [2];
  unsigned char Data [16];
  } TestType.

  TestType TestData = {{1,2}, "23456"};

  CNVCreateScalarDataValue (data, CNVStruct, & TestData);

  Network Variable only does support the primitive data types?

  Can I transfer data on the C structure?

  Hey Vincent.

  You can send some types of structure, but must be in place.  Because your structure contains arrays, you have a building yet more to do.  It should look like this:

• variables of user-defined data transfer

  Hello

  I use the etherCAT 9144 chassis and is only supported by this hardware FIFO range target. After a search, I realized that the only way to transfer data from FPGA to the host by using user-defined variables. But these variables do not support the notion of FIFO. So which is the best practice to transfer data after measures (provable 10 Hz measurement of 15 values) to host VI?

  Thank you

  As mentioned, the 9144 only supports the analytical engine.

  In regards to what you do, it really depends on the entire application. For example, what is the master? Are there other systems at issue here? Etc. It's a good read, in general, although it might not help this second right: http://www.ni.com/white-paper/14151/en/

  A high level, you need to decide what you need. If you have need for deterministic communication, low-latency over long distances from a RT controller, the 9144 is probably the right choice. If you need low latency + streaming over short distances to a RT controller, you should look into the RIO MXI chassis. If you need mainly not deterministic low speed (10 hz) data mixed with low flow continuous over long distances to a windows or host RT, then ethernet expansion rio (9146,7,8,9) is probably the right choice. If you need high speed continuous with low control latency over long distances to a windows or RT host, you need a full cRIO controller. Based on what you've posted so far, its uncertain is the right person.

  Lets say you're stuck with the 9144 for now. As you can easily hit 1 kHz scanning cycles, it should be perfectly possible to data 'stream' to 10 Hz. If you run the scan at 1 kHz engine, then you are 100 x oversampling. Where it gets complicated is this requirement of sync. By default, acquisition input/output is synchronized to the clock of the scan (and you can see when the clock of scan is set by a knot of e/s FPGA). However, you can take complete control of a module in the FPGA and read inputs and outputs at any time if you please. In other words, you can set up so when DIO0 goes high you immediately enjoy all the values of AI 15. You can then transfer these values HAVE switched to the host using the user-defined variables.

• Transfer of a captivate variables module to another

  A colleague I work with wants to put in place two simple variables which keeps track of a score and one that holds a user name.

  The course will consist of a number of modules hosted on an LMS System.

  Is there a way to transfer variables between modules:

  Thus, for example, if in module 1, I enter my name as "Joe Bloggs" and I finished module 1 with a score of 200 when I load the module 2, I'll start with a score of 200 and it will remember the name I typed in module 1?

  He seems to think that it is possible using Javascript, but doesn't know exactly how he would implement it yet.

  So I guess my questions are

  (a) is it possible to do?

  (b) if it is, which is the best way to do it (can't use javascript)

  Thanks in advance

  The simpler way without JS, will use the new widget from CpExtra of InfoSemantics, which is for HTML output only.

  CpExtra - Widget of HTML5 (01 single user license). Infosemantics Pty Ltd

  If you don't want HTML but output SWF, take a look at the Save and Load Data widget by Michael Lund:

  Save and Load Data Widgets for Adobe Captivate patch | CP Guru - Adobe Captivate Widgets

  Someone has confirmed that this widget is still functional for future versions of Captivate.

• Variables of transfer from one image to another

  Hello

  How I would go about transfer from one to the other variables?

  What I want to do, is send data to a database of the first image then get info back and fill out the form on the second image field.

  For the moment, I have the code in the second image is everything! What want is to send that the username and password enter the text boxes first frame to a database and then display the info returned on the second image.

  I already have working code php, so this isn't a problem.

  Thank you

  Nightwalker

  Download and read my attached Fla file. The variable is set to the first image. It is accessible from all of the other images in the film covering the "Actionscript" layer.

  Enjoy.

• Marquee Learning Interaction; Assign the Variable does not transfer all text.

  Captivate v9. The use of the Interaction of learning of text scrolling to capture text user input by assigning a Variable name. On the next slide, insert the Variable in a text caption. The text entered in the previous slide in the scrolling text is truncated. For example, the entry of 2 or 3 sentences (100 + characters) generates only the first 50 or so displayed in the text caption.

  When you inserted the variable in the dialog box did increase the length of the default 50 to what you want?

  

• Transfer variable color change color to value

  Hello.

  I have two variables:

  var defaultMainHexidec:Number = 0xFFFFFF;

  var mainHexidec:Number;

  If a value is not assigned to mainHexidec, I attribute the default as follows:

  mainHexidec = defaultMainHexidec;

  trace ("mainHexidec =" + mainHexidec);

  The trace returns the same value as the value returned when the default value.

  But if I use mainHexidec as the fill of a rectangle, the color is black, while the default value is white (or any other color).  If I set the color using the default variable the filling appears correctly.  If I put the number using the number traced in defaultMainHexidec or mainHexidec (she traces the same number) the color is correct.

  Someone has an idea, what happens?

  Best regards

  Chris McLaughlin

  nothing does not appear with the code - unless you create the rectangle before loadContent works?

• How can I transfer data from the database in a variable (or array)?

  I made my request according to the example (http://corlan.org/2009/06/12/working-in-flash-builder-4-with-flex-and-php/). Everything works fine. I changed a single function to query the database - add two parameters and get the value from the table to a string format. A test operation shows that everything is ok. If I want to display this value in the text box, I just do drag and drop off service to this element in Design view

  (< s:TextArea = "153" x = "435" id = "nameText" text = "{getDataMeanResult.lastResult [0] .name}" width = "296" height = "89" / > ").

  Also, it works fine, just a warning and encouraged to use ArrayCollection.getItemAt ().

  Now, I want to send the value to a variable or an array, but in both cases, I get an error: TypeError: Error #1010: a term is undefined and has no property..

  How can I pass a value to the database in a variable? Thank you.

  public var nameTemp:String;

  getDataMeanResult.token = authors.getDataMean (arrayOfNumber [0], dir_id);

  nameTemp = getDataMeanResult.lastResult [0] .name;

  public var nameArray:Array = new Array();

  for (var i: uint = o; i < 3; i ++) {}

  getDataMeanResult.token = authors.getDataMean (arrayOfNumber [i], dir_id);

  NomTableau [i] = getDataMeanResult.lastResult [0] .name;

  }

  And how do I use syntax highlighting in this forum?

  Astraport2012 wrote:

  Thank you.

  Then this simple question: How can I place a mySQL database data in a variable using the wizards FB4 (connect with PHP)?

  If you can show examples please.

  I couldn't find examples. Send data to a field text or DataGrid - much, but no variable.

  the use of assistants? not sure... it is generally a bad idea to rely on them, because they will never fully what you want anyway. I would recommend learning abit of PHP and manage by yourself, because it allows you to manage everything exactly as you wish.

  small example of communicating with a database using PHP + FB4:

  mount a database

  

  write you a small script that will access your database, get a value, for example:

  ";
  
      while($row = mysql_fetch_array($result))
      {
          if($row['messageID'] == "3")
          {
              print $row['message'];
          }
      }
      print "\n";
  ?>
  

  This will get the message with ID '3 '.

  make an HTTPService in FB4 app to call this Script, as follows:

  and the value must be picked up by the Script and properly stored in a variable