HDMI connections to multiple devices

Similar Questions

• Connection to multiple devices sequence using FF Fieldbus Foundation open VFD

  I am trying to connect to multiple devices on the same bus fieldbus. When I try
  to connect using 'FF VFD open' admission that he is VFD tag (I left it as)
  by default (0)). I can connect to a device, he questions and close the connection.
  However, when I try to do the same with the following equipment, it errors on Open
  VFD. The bus, everything seems to be connected correctly, I can query all devices
  there and get their various identity papers, so I think it's to communicate all the
  right.
  I tried to connect using different, unique VFD tags. As I mentioned, I
  have tried to disconnect and close the entire connection before trying to
  to connect to another unit. I tried to connect to individual units with the
  other disconnected from the bus and each will connect and work very well, so I
  know that everyone is able to work-just not when other units are also present.

  Any idea is appreciated.

  
  

• Connect to the TV with HDMI to HDMI connection

  I'm trying to connect my HP Touchsmart 600 (oem Win 7) to my Samsung 850 HDTV using the HDMI connections. Both devices (PC & TV) do not even each other. Do not know how to proceed. Any thoughts there. I though it would be simple to s cable and go.

  The port hdmi input graph based solely on a call back from HP support. It's disappointing because I had two HP tell me that it was an hdmi output.

• E3000 loser on multiple devices wireless connectivity

  Problem with router Linksys E3000 (firmware 1.0.02). I have problems with the following wireless connections:

  iPhone 4G (female)

  iPod Touch 2 G

  PC with Wi - Fi (adapter brand Linksys no)

  NetBook Acer (not Linksys adapter brand)

  It comes from the connection is interrupted and dropped, but the devices and the router DHCP clients table indicate that connections are always present. By interruption, I mean that no data traffic is transmitted.

  IPhone 4 G to the my iPod Touch Wi - Fi my son and wife show that they are connected to the network home, with WiFi bars displayed, and the check mark is present next to the home network connection in the device for both settings. When I check the table of DHCP E3000 customers, two Apple devices are listed as with a connection. Yet the two devices to display network errors when you try to use any application that connects to the internet. By raising the wifi on each connection, the connection is restored to the point where traffic passes now. My wife and son believe it's after 10 minutes they encounter interruptions.

  On the PC and NetBook, connections must be terminated and reconnected. I've not timed to see how long before the connection becomes problematic.

  Interestingly, my ASUS laptop and my iPhone 4G do not have the issue, nor did my (Dell) laptop.

  There is no time-out setting in the router config. Thing the closest is the beacon interval, but I don't know which way to adjust (up or down) to help the devices which are undergoing interruptions. I did not a setting of the interval... at this moment, everything is set to the default settings.

  The E3000 replaced an old WRT54 (v2 hardware) router so that I could have a N router in the House.

  Thank you
  -Phil

  How about you change wireless channel? If you do not, then you should try it. Using the two bands, 2.4 Ghz and 5 GHz? If so, make sure they have different but unique SSID. Have you tried to remove the Security Wireless for testing?

• Satellite Pro L770 - how to activate the HDMI connection?

  I have a problem with my HDMI! I connected the HDMI cable to my laptop (L770) and my TV and TV recognized that an HDMI cable is connected. Now, I want to activate the HDMI connection on the laptop with +, but I only have the 4 following posibilities: LCD, LCD + CRT, CRT, LCD + CRT judgements.

  Who could tell me, how do I activate the HDMI? Sould I see a HDMI device in my Device.Manager?

  Thanks 4 your help.
  Tom

  Hello

  Hmm, in some cases the BIOS contains an HDMI output option.
  In your case, I recommend to check this.
  I have not very well if this available but it s m of a value in a control.

  But usually the Fn + F5 should work as described in the user manual... did you check that?

• Qosmio G50-129 no sound with HDMI connection

  Hello.

  I have a Quosmio G50-129. Recently, I tried plugging it into my Sony Bravia LCD TV via the HDMI connection.
  I have video output but there is no sound on the TV.

  I tried to set the HDMI as audio device as default and the sound level meter in the sound properties panel appears to show activity, but nothing comes out.

  Can anyone help?

  Hello

  I m not Qosmio G50 owner, I only have the small F50, but it must be identical to yours I think. So first of all, I must say that I never had a problem with the HDMI connection. Everything has worked perfectly since I used the HDMI connection, the first time

  In any case, if you connect your laptop to an external monitor or TV using the HDMI connection, connect the cable first. After this power on the TV and select the HDMI input right channel. Then go on your laptop and if you press FN + F5, you can change between the different options.

  Normally the HDMI output is automatically set as the default audio device, not to follow these workarounds with good screenshots:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

• Satellite L650 - HDMI connection for external monitor

  I've linked the laptop to my Sony LCD TV via HDMI, no problem. I have a (Acer, 24-inch) LCD monitor that has a HDMI port also. I used it to play ps3 and xbox360 via HDMI connection, no problem. I have two lines HDMI 1.3. The two lines are working without any problems.

  However, when I connect my laptop to my LCD Acer just external LCD monitor can t work properly. I can barely see what is display on the monitor, very snowy. It's hard to describe. I took a photo but don't know where to download it here.

  I tried both HDMI lines, but both failed. I tried to change a few settings in the laptop, but nothing makes any difference. I'm looking for the driver for video card on the Web from Toshiba website and found that my current license is updated.

  I'm not a tech geek, but I think that I don't know something on the computer. Am I missing something here?

  Guys (and girls), please throw in an idea (tooth tell me to check if the connection is good, I don't already).
  Thank you

  Hey,.

  If you connect your laptop to external monitor and press the FN + F5 key combination what happens exactly? Pressing the FN + F5 key combination shows different options and you should test with external monitor only (not the clone image). If you work on external monitor doesn't do this work?

  In addition, you must connect the devices before starting their.

  Also, take a look in the BIOS and try to load the default settings. Make sure that that the HDMI cable is connected before starting Windows and check the status again.

  By the way: what operating system are you using exactly?

• How to synchronize multiple devices (294 x) Rio usrp

  Hello

  I'm trying to receive 4 channels using two devices USRP-294xR (USRP RIO) to synchronously and run the example for the reception of several device program.   Often, I receive the error message "failed synchronization.  If I run the example several times in a row, this error message occurs more often than otherwise, but for all the times that he does not, I am able to collect data that seems like synchronous through the channels of reception.  So, in a way that works for me, but with the annoying feature that I need to run the program several times now until I am able to avoid the "Synchronization failed" error

  My installation includes an Octoclock connected to the Ref connections in and PPS in the two USRPs.  In the example, VI, I selected Ref in, but it is clear to me what choice should I use for relaxation.  Possible options are: 'Software', 'Immédiate', "Digital Edge", "Rx Start Trigger" and "Tx Start Trigger.  I had assumed my previous experience using these devices with the FPGA Ettus I would choose an option indicating that I tried to synchronize the external signal of PPS.  "External PPS" is not among the options of trigger, I'm confused as to how the synchronization.

  I saw the article below, but it's not not clear for me if I should be able to achieve my goal without making changes FPGA. It is possible to synchronize multiple devices using the program by default FPGA and example (i.e., for example RIO, not the host screw using the Ettus FPGA image)?  If so, any suggestions to help me avoid this error "synchronization failed"?

  http://zone.NI.com/reference/en-XX/help/373380D-01/usrphelp/synchronization/

  Thank you.

  Rob

  rkossler1 wrote:

  Since we did not have a 6674 t, I thought I might as well try to connect PPS from a RIO USRP to PPS on the two RIOs USRP.  I just used a BNC - T to "distribute" the relaxation.  It did not work - maybe for the same reason you mentioned on the PPS USRP out is not strong enough for the Octoclock by car.

  Yep, that's exactly it. The USRP RIO is not output enough power on the PPS TRIG OUT line to drive the lines of PPS TRIG IN two USRP RIOs, unfortunately

  rkossler1 wrote:

  How can I know which USRP RIO is the 'master '?  Do I need to designate in the software?  I chose arbitrarily use the device for which I have connected the PPS on the BNC - t 'RIO0', but I don't know how the SW knows what USRP I chose to connect the power cord to.

  The USRP captain's exit a PPS TRIG OUT in PPS TRIG IN sound. then all the USRPs you set this unit as the * first * device in the table of features of RIO for the façade of synchronization with a cross screw.

• How do the DAQmx sync with multiple devices

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (device). I tried to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. AI des_v2_Multi-Funtion_Synch - AO.vi is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much.

  Sincerely,

  Jie

  You have a cable RTSI connecting PCIe cards? In order for them at the time of sharing and triggers, you must install a RTSI cable like the one below.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/12631

  What are the exact synchronization requirements you need for your tasks?

• Active Directory - join the domain for multiple devices

  Hi all

  I need your expertise to advice me how join domain for multiple devices.

  Currently my organization have more than 10,000 computers are made up of Windows XP, 7, 8 and 10.

  We will deploy new Active Directory server in the data center.

  Currently, we plan to go every computer/devices to perform a field joints. This method will take much time to complete the 10,000 devices.

  is there another method to do this?

  is there a method that all devices will join automatically field when it is connected to the corporate network.

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• best practices for the structure of the code control multiple devices in a sequence-step 2

  I have a question about code architecture and to get multiple devices controlled and synchronized for an experience. It is an 'architecture' - type application, so I hope for some suggestions on how to proceed.

  I run an experience in which I order 2 NI PCI-6733. I will soon add a Tektronix AFG 3022 B and have long been turned off the opportunity to rewrite my code labview from the ground upward. I inherited from a previous search, and although functional, I want to make it easier to modify and divide into sub - VI and these. Link to the current program (labview 8.6.1) is here if you do not want to see the code that is currently used and Subvi is in a zip file. The current version of experience consists of one stage, all writing the data for PCI cards is saved for the end. I need to change that in my configuration again well.

  The new experience consists of 2 steps. The first will take place (loop an array of output for PCI cards) until he heard a 'real' another computer (connected via TCP). When you do that, it should go to step 2 and run a sequence (usually 10 ^ 5 timeunits of length, where the unit of time is 0.1 ms) which refers to two PCI, the AFG 3022 B cards and with the flexibility to add more devices in the future.

  The most popular would be structural advice. How to organize the screw, if it's good to use a VI 'master' that would control the two sub - VI phase 1 and 2, etc...  Feel free to ask for more details if it helps clarify my question. Thank you!

  Such programs typically use a kind of State machine.  You will find many tutorials on LabVIEW state machines in these forums or forums of LAVA.  If you do a rewrite, I also recommend that consider you the LabVIEW classes.  They help modularize your code and do more reusable subparts.  You can end up with less to maintain, accordingly.

  You can also consider TestStand.  It was designed to perform sequences of tests, so can make your life easier.  It would be also exaggerated gross.

  Let us know if you encounter any problems with the machinery of State or classes.

• 3070 connectivity problem - multiple Accespoints with the same SSID

  Hi all

  I have a problem with my printer HP Deskjet 3070 printer all-in-one.

  I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.

  For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.

  I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.

  I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)

  When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)

  If I take one of the accespoints offline, the printer becomes available.

  Is this a problem on my end or a problem of software/firmware printer?

  Kind regards

  -eth0

  Lol this is not very clear to me?

  But it is very good that we continue here:

  http://h30499.www3.HP.com/T5/printers-DeskJet/3070A-connectivity-issue-multiple-Accespoints-with-the-same-SSID/TD-p/5865699#.UKNyiYatlI1

• Option of surround sound clothes outside with HD4870 HDMI connection after installation of SP1 Vista54

  Clothes outside with HD4870 and HDMI connection surround sound option
  I just built an HTPC and installed SP1 Vista64 and I have a problem. I have a DFI LanParty very X 58-T3H6 motherboard and a VisionTek Radeon HD 4870 video card with HD audio. I have a HDMI cable to my Sony AV receiver and all I get is Audio stereo. The subwoofer never wakes from sleep, or AV receiver indicates anything but a stereo input.

  I have the RealTek HDMI audio device installed, and he says he's working properly in Device Manager. Under properties, what is proposed is stereo speakers. Surround sound is presented as an option, but it is grayed out and not selectable. All drivers are up to date from four days and I have the on-board sound card mother disabled in the BIOS and it does not appear in the Windows Device Manager, nor are there any other audio device except the RealTek HD HDMI audio device.

  Other HDMI devices, such as my XBOX 360, a surround sound very well via the AV Sony receiver.

  VisionTek support told me to install the RealTek HDMI driver, I did, but that's all the help they were able to give me.  The problem persists.  Surround sound is gray under sound properties for this device,

  I took the HDMI cable from HDMI port on the video card and plugged on my XBOX 360 and I get surround sound, so I know that the cable and the audio/video receiver is configured correctly.

  If anyone has an extra idea about it, I know you more!

  Thank you!

  Hi flattery.

  Thank you for taking the time to post.

  Can you please post here the result of your dxdiag in the forum?

  ·         Click on the Start Orb on the Office

  ·         In the Search box , type dxdiag and press enter

  Once you're in the DirectX tool, click Save all information and save on your computer. Open the saved file (must be a text file) and copy this information and paste it into the forums here so we can see again.

  1. What is the version of the BIOS that you run on your motherboard?

  2 have you ever had this installation or surround sound from always grey work?

  Please let us know.

  Thank you

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my Dell studio 17 audio does not play on tv with hdmi connected but the video is very good

  I have an old Dell Studio 17 tour with dual processors core T6400 4gig and every time that I plug the HDMI on an external device, the sound disappears on the pc and the tv for 2 years, but the video is great. It never worked, but was not important until lately. Even though I attribute the correct connection including video and audio, no luck.

  Check with Dell support. It may still be under warranty.
  http://www.Dell.com/support

  Thank you

  Marilyn

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.