Transfer of virtual machine from one host to another extremely slow

Similar Questions

• What is the best method to transfer a virtual machine from one PC to another?

  I am a novice in VMWare workstation. I created my first SharePoint 2010 development VM, and my boss wants me to give him a copy of my SP 2010 VM. He told me to just give him the. VMX file, but I believe that there must be a better method to transfer a virtual machine from one PC to another.

  Thanks in advance.

  Coltrane.

  Coltrane,

  to transfer a virtual machine from one PC to another, shut down the virtual computer and copy the complete folder with all the files (vmx, vmdk,...) on another PC.

  A thin to keep in mind (outside the Windows license) if the virtual machine is one attached to your network, you must change the copied disk - as you would with a cloned physical system - to have a unique host name, MAC address and IP address.

  André

• How to move virtual machines from one host to another without full VI and vMotion?

  Hello

  could you help me with a question?

  I have two installed hosts with ESXi 3.5 U5, which are connected to the shared iSCSI (Openfiler) - VMs storage are installed on the storage disk. My requirement is to have a cheap solution of DR - in case of failure of a host, I need to move and start VM on the host of work. How to achieve without going through VMware Infrastructure 3.5 and vMotion?

  I found this article:

  http://www.virtualizetips.com/2010/04/how-to-move-a-VM-without-vCenter-or-storage-VMotion/

  but RCLI needs Infrastructure of VMware ESXi does not have default CLI So, how to move VMs between hosts (of course I mean "cold" move) without byuing any additonal VMware SW? It is generally possible in my situation?

  Thank you.

  ARO

  Danas

  If the virtual machines are running in shared storage (two guests see the same storage iSCSI or NFS) then it's simple. If a host goes down, then look for the data store on the ESXi host work. Navigate through folders for each virtual machine, right-click on the VMX file and add to the inventory. You will then be able to turn on the virtual machine.

  To move a virtual machine from one host to another, as long as both hosts had the same processors, you can pause the VM on the single host, browse and add the virtual machine to the inventory on the second break host and the United Nations.

  If the virtual machines are on local storage, but the two hosts are connected to the same shared storage, clone virtual machines on a daily basis from local storage to shared storage. Use something like ghettoVCB http://communities.vmware.com/docs/DOC-8760 make the clone. In the case of a server failure, you will be able to browse the data store, add to the inventory on the shared storage and switch the cloned machine.

• How one move the templates of virtual machine from one host to another host in the cluster even

  Hello

  Can you get it someone please let me know how to move the templates of virtual machine from one host to another host in the cluster even?

  Thank you

  James

  Welcome to the forums!

  Convert it to a virtual machine (right click on guest and choose the appropriateoption), move it through the migration feature (right-click Guest, and then choose "Migrate") and convert into a model (right click on guest again and choose to convert to a template).

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• Move the virtual machine from one host to another with shared storage

  Hello

  I have a question on how to move a virtual machine from one ESX 4 host to a host ESXi 5.  These hosts have access to the same shared storage but the ESX 4 host is outside the network and host ESXi 5 is inside the network so vMotion is not an option.  They are in different groups.  I know that there must be an easy way to move this virtual machine, but for the life of me, I can't find it.  I guess I have remove the virtual machine from the external cluster but how to make the virtual machine in the internal cluster?

  Thanks in advance...

  If both host access to the data store even where VM's store, just stop the virtual machine, remove inventory on ESXi 4, go to ESXi 5 vSphere vSphere, browse the data store where the VM is stored, do a right-click on the .vmx file and add to the inventory.

• How to move templates of virtual machines from one host to another, if the partners host is offline

  Hi people,

  I knew that I need to convert a virtual computer model to a VM to move from one host to another, but that when the host, that the model is associated with, is offline / broken? Is it possible to make it work again on the vsphere client or only via the command-line interface of cmd and save the model with the host?

  Thanks in advance.

  Kind regards

  Bjoern

  You can try this...

  If you have another ESX host to add the data store to which the template is stored.

  After that browse the data store and go to the directory of the model. Select the model VM file and add it to the inventory and select the host on which you want to add the template... After you have added the host convert VM...

  Thank you

  Please indicate if useful...

• Move a virtual machine from one host to another without vCenter Server

  Hi all

  Something's been recently who raised the question on moving a virtual machine between hosts without vCenter.  I am running vSphere manage 3 blades in a c3000.  I have a shared storage iSCSI blade which all the blades connect to.  All of my virtual machines are in the same data store on the shared storage.  I'm also under vCenter Server as a virtual machine on one of the blades.  The blade that hosts the vCenter Server VM dead recently. What I was hoping to do is use vSphere Client to connect directly to one of the other blades and hover over the vCenter Server VM to one of the blades of the good, but I can't find a way to do this.  Using the browser of data store and see all of the virtual machine on the store of data without problem, but I see no way to migrate the virtual machine without vCenter server.  In the end, the blade has only had a problem of memory I corrected and managed to raise the blade but I now think of the future.  I use only Essentials, so I don't have access to vMotion and Storage vMotion.  I know that running vCenter Server is supported by Vmware, but I wonder if it's the best practices.

  Any thoughts?

  Hi, I assume that you get this error because the machine is running, try to connect directly to the host and do the same with an engine off the machine.

• How to move the virtual machine from one host to another?

  The two boxes under ESXi 5.0 (hypervisors freely licensed).

  I have a virtual machine (FreeBSD) that I need to go to another box.

  Network ports are not the same, but I guess that's not a biggie to reconfigure the network cards. Other than that, I have to follow a few best practices/SOPS or copy & paste is everything I need to run perfectly on a different host?

  Thank you very much!

  FastSCP allows you to copy directly between hosts, so it can save a lot of time you copy.  I don't know what you mean by 'manually' copy files.  Do you mean using the vShpere client and download the files to a location then download them to the new host?  Either way works perfectly, but FastSCP you must save a step.

  If you have currently snapshots, you can consolidate first or leave em and just copy them with the rest of the virtual machine. There should be no need to do something with snapshots, if you perform a migration 'offline '.  As long as you take all the files, snapshots will be displayed on the destination host computer when you save the vm on the host.

  I did 'on-line' migration of large virtual machines first to the take a snapshot on the source host, copy basic to the first destination host disks while the virtual machine was still running on the source host.  When I was ready to migrate the CPU processing, I power off the virtual machine, copy the other files (which would include the deltas from disk and whatnot) and turn on the vm on the destination host (which would cause only a few minutes of downtime).  Later, I consolidate records by removing the snapshot on the destination host.  Way to a poor man to do a migration of vm on ESXi free edition with little downtime.

• Move the virtual machine from one host to another ESXi

  Hi all

  Quick question, if I wanted to move a virtual machine hosted on a server ESXi ESXi server what is the easiest way? Should I use the converter to do?

  Thank you

  ESXi 4.1 (Vsphere Hypervisor)

  So have free Vmware Vsphere Client

  In this case, the options are:

  • Standalone converter
  • Browser data store (download and transfer files)
  • SCP or FastSCP and then add the virtual machine to inventory with the browser data store

• How to move the virtual machine from one cluster to another cluster

  How to move the virtual machine from one cluster to another cluster

  If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case.   If the virtual machine is turned off, it may be migrated regardless of the data center.

• Trying to copy a virtual machine from one server to another

  Hi all

  I'm new to ESXi 4, although I used VMWare Workstation for years.  I am trying to copy a virtual machine from a Windows system (Sysprep) from one host to another.  The two hosts are identical systems with the exact same ESXi host configuration.  Same hw, same version of ESXi, same setup, same size of the partition.

  When I use the Vsphere data store browse to 'download' the vmdk and vmx files to a local drive (Windows Server 2003), I get the following 3 files: the same vmx file, a tiny vmdk file and a file huge filename - flat hard.  The file vmdk on browser to store data from the source host is about 23 GB.  The flat on the local system vmdk file is almost 63 GB.

  Can I reopen Vsphere on the destination server and "load" the 3 files in a directory that I created in the data store.  Once there, I use the browser "Add to inventory."  When I try to turn on the virtual machine, I get the error message "not enough space on the data store."

  Any ideas of what I could have done wrong?  Again the data store configuration is identical:

  Local disk to VMware: 62.95 GB, Total formatted capacity: 62,75 GB.  1 VMFS 3.33 MB block size it's the only VM on the system.

  Thanks in advance,

  Mark

  What you see is by design.

  When you try to copy a disc loaded end service, with the browser data store or FastSCP, the virtual disk will be inflated. Use the converter such as recommended by AlbertWT.

  Since the virtual disks of destination must already 60 GB of disk space you may not able to power on the virtual machine, because there is not enough disk space for the swap file, which is the size of the configured RAM (less reserve, if necessary).

  André

• Move a virtual machine from one SAN to another

  Top o ' the morning, tech heads,

  I have a VM, I need to move from one san to another. I think I'll need to shut down the guest operating system, download all the files (see image), create a lun on the san of destination, then download the files to that lun. Lack of vmware 5.5. Is that what that sounds right?

  Your ESXi host vSphere is a stand-alone type or is managed by vCenter? If managed by vCenter, just make a Storage vMotion... If not, take a look at this article: VMware KB: move or copy of a virtual machine in a VMware environment

• How to copy a virtual machine from one bank to another bank without storage vmotion?

  Hello

  How can I copy a virtual machine disk local to a data store if I don't have storage vmotion? We bought vSphere Advanced... :-(

  Can I migrate a powered off power VM from local drive to SAN datastore?

  Thank you!

  or you can just power up the virtual machine off the coast and make a migration.  One of the options will be to move the disc as well.

• Move virtual machines from one position to another

  We currently have and ESX server running version 4. We will receive 3-4 physical servers that are using ESX version 3.5 each housing 15 or so virtual servers. Command post that controls these new virtual machines will not be moved with the rest of the equipment. We will need to add these servers to our environment vSphere 4 current. Is this possible? If so, what are the steps needed to achieve this? Is there a documentation can someone indicate which would explain me how to proceed? Any help would be greatly appreciated.

  you are the hosts and Clusters view?  This is where you need to "add host".

• Unable to migrate virtual machines from one ESX to another in a cluster

  I have 7 ESX in a cluster... 2 ESX are unable to migrate virtual machines into and out of the host... When we try to perform a manual migration, it displays the following error...

  Impossible to pass. Host CPU is not compatible with the requirements of the Virtual Machine to CPUID level 0 x 80000001 registry "edx" host bits: 1110:1111:1101:0011:1111:1011:1111:1111 required: 11 x 0:1 x 11: 1100:0011:1111:x 0x1: 1111:1111 inconsistency detected for these characteristics: * NX/XD (data execution protection). If the Virtual Machine does not have this feature, power off the virtual machine and delete the requirement of NX/XD by changing the settings of the virtual machine (advanced options).

  Looks like 2 of the 7 ESX has disabled NX/XD (or could be activated I don't know which) in the BIOS of the Server - VMware allows you to maske this characteristic shape the VM so it can vmotion between these hosts - initially put there where the NX/XD bit became more popular in order to allow users to migrate between these hosts with different parameters CPU-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful