Make a "Compaq"factory restore"full" on my XP Media Center computer.

Similar Questions

• HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  PainedByTech wrote:
  

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

  For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?

• Make my own "Factory Restore"

  Assuming that I first create a backup of the original, is it possible that I can crush the contents of the restoration of the Facotry provided with a PC with a customized version of my own making? For example, a version that includes the operating system and software such as Word and Excel, so that I don't have to reinstall them after I perfom a factory since the recovery partition restore.

  I have a backup solution and recovery data of interest going, but it would be useful that I could restore the PC and its software in a fixed state of my own choice in the system, using the rather than having to re the image of an external device. on the one hand it would be faster not to have to copy several gigs worth of OS and applications down to a USB cable for my caddy to external Imaging.

  
  

• HP 2350eo p6: I can't understand how successfully do a factory restore on my win 8-> computer 8.1

  I tried to do a factory restore, and it just doesn't work. I can't start to the top of the recovery screen.
  I tried restarting and pressing F11. Because Windows is not normally start, he's clearly trying to do what I want it to, but it does not work. I tried once to leave it for an hour and everything I've seen on a black screen. I also tried to boot via the Recovery Manager. I tried to create a USB stick recovery. First of all, I created the USB through recovery manager. Then I rebooted and held of the ESC. Then, I started the USB key. Nothing happened.

  When I turned off the computer and started it again, as long as I don't push any button, windows would start as normal, up to this point.

  Given that HP tools could not solve the problem, I tried to restore through the windows, the standard method, I suppose, by selecting Properties on the right sidebar. Computer properties, then update/restore, restore, remove and install windows. When I tried, the computer restarted and I got a black screen again, but now, I can not even start Windows more. He answers when I press ESC while booting, but I can not to initiate anything.

  I just wanted to make a simple factory restore and now my computer is dead. Where should I go from here?

  My computer is a HP Pavilion 2350eo with Windows 8.1 p6, it was packed with 8 victory, but a few months after asking me about upgrading a few times, somehow forced the update windows update. My hard drive is almost full at the time, so I don't know if my problem is related to a bad 8.1 Win install. It seems very pulled by the hair.

  I was able to understand.

  I pressed ESC while booting. So, rather than starting the real usb, I chose run Application Uefi, and then I was able to browse the actual usb (which I did before) and select an individual file to run. I do not know which file I got, but I was able to run one of the files, that triggered the factory reset.

  So my problem seems similar to when you enter a CD in windows, and it's not autorun.

• Windows Media Center - Internet TV - availability and navigation of the full episodes.

  With regard to the full episodes of Windows Media Center - Internet TV.

  I've seen a few questions about this in the Microsoft Answers forum, but 2 / 3 times the official response was unrelated to the question asked. So, to be clear, I'm not talking about watching live TV, navigation in my TV guide, TV recording, or watch recorded TV shows. It's strictly about the availability of the property and to navigate to find full episodes on Internet TV.

  There are a few ridiculous clips ginormous and only a small handful of full episodes. I hate clips. In a busy life, they are the opposite of the useful. So, instead of going through every single show individually to see if it contains full episodes, I want a way to browse shows with full episodes. Is this a problem of training or an enhancement request? Is there a way to filter the full episodes only?

  I would also like to be able to filter my search of full episodes. It seems ridiculous to me if I want to just full episodes, I have to go through a long list of clips in the search results to find. Again... ask for the issue or the development of training?

  I'm also confused why some shows that have full episodes on the site of the network do not have full episodes in WMC Internet TV. I know it's a matter of content and perhaps not something, you can contact... is it be restricted by networks?

  Thank you!!

  Hello

  All the content comes from the provider.  I hate watching the clips too and there is not much Microsoft can do about it. It is sometimes frustrating to go through all the clips to find full episodes. The only thing you can do is to provide feedback to microsoft to enhance the functionality of Media Center search to find full episodes.

  Provide your feedback on this link-
  www.Connect.Microsoft.com

  I'm sure that there are many ppl who like to have an option like this!

• Compaq Minin 311 Factory Restore does not

  Hello

  I have a Compaq Mini 311 with Win XP and I'm trying to restore it to start when press F11, nothing happens.

  How do I factory restore my mini?

  Thank you

  I suggest that you contact HP support and see if they are still able to provide you with a recovery kit.  If you live in the United States or to the Canada just call the 1-800-474-6836.  If you live in another part of the visit of the world Support of HP worldwide, select your country and then click on "contact us" at the bottom right of the screen.

• How to save important files a files on a dvd before doing a restore of the entire system with factory.so disk I am able to reinstall computer after system restore.

  I need to do a restore of the entire system with disc received from factory.but that I have personal files and folders that I need keep.such as banking, contacts, photos, ect. ect. How do I put them on a dvd a restore then their return after the full system restore

  Hello

  If the system still boot and CD/DVD Burns just put in a DVD-R (write once) or DVD - RW (burn
  several times)-it will encourage - when its ready use Windows Explorer to drag and drop files (and
  their content) on the DVD. When you're ready, click BURN. I would like to make a couple of each DVD for
  Security with redundancy. These will not be encrypted and you can access the files out of them or
  subsequently copy on a hard drive.

  Basically, make sure you know what you want to copy the files and put them in a blank DVD to write.

  ---------------------

  If the system does not start, then you will need to put the drive in another computer or in a
  External enclosure USB so you can copy files to removable media.

  ---------------------

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx

  How to burn a CD with Vista
  http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/

  Burn a CD or DVD in Windows Vista
  http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/

  Microsoft video - how to burn CD/DVD
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.cdfreaks.com/

  Burn a CD or DVD in Windows Media Player
  http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspx

  Burn a CD or DVD in Windows Media Center
  http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspx

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
  How to burn an Audio CD - see also related Articles
  http://www.vista4beginners.com/how-to-burn-an-audio-CD
  Burn a CD or DVD using Windows Vista - a video
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Disc burning: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspx

  Should which CD or DVD format I use?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspx

  Windows Media Player playlist: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspx

  Get the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• If I factory restore my iphone 4S so its going to be back on his old IOS? as the IOS comes integrated in the iphone 4S?

  Hi guys! My Iphone 4S is running on the latest IOS and that is causing my Iphone running slowly... So I want to make sure if I restore to factory setting so its going to take my phone back to the IOS comes builtin? Please guys tell me fast...

  Restore an iPhone will not downgrade the version of iOS. There is anyway it downgrade to an earlier version to the latest stable version for the iPhone model.

  (143878)

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Can I update the image of factory restore?

  Hi all

  I recently had the pleasure to make a 'factory restore' on a M100 and an A300.

  While the process went smoothly (even if the A300 recovery disk creator should not be put back first to make it work), data that has been restored were, of course, obsolete because he didn't understand not updates either the operating system (Vista Home Basic) or to one of the Toshiba Software (including drivers and tools utility).

  I know that you can return the system to Toshiba for a new image of the HARD drive by them (at great cost), but I don't know if that provides a picture of 'update' or if she simply replaces the original image (obsolete).

  Is it possible the 'factory restore' image stored on the recovery partition can be updated and a user, or a technician of the 'non-Toshiba"without having recourse to external software such as Acronis?

  Thanks in advance for all advice offered.

  Hey Buddy,

  No, you can update the image of factory restore t. Settings (Windows, driver, etc.) are stored in an image that can t be changed or updated because these settings are pre-tested on your laptop computer and any change would be not compatible. In addition, I think that Windows updates are made with two or three clicks, you need just to a good internet connection. Alternative, you install Microsoft's latest Service Pack which contains many important updates ;)

  By the way: I made my own image using Acronis image. After the installation of recovery disk Toshiba I removed all applications that I n t need (ConfigFree for example), installed the Windows updates and my other apps that I need (Skype, Office, etc.). After that, I tested the laptop a bit and finally and especially that I created an image with Acronis. So I can restore my own settings every time too. ;)

• On Satellite A105 - S2131 factory restore

  I have a series of Toshiba Satellite A105 - S2131. I'm in the need to do a factory restore, but I don't have a restore disc, because I never saw when I got the computer, and when I tried to create a floppy disk to the computer that it does, I get an error that says in cannot find the file to create the disc. Now I don't know what I can do to make the factory restore.

  Any help would be great.

  Thank you

  Hello

  For me, there is a clear situation you need to order the new recovery media by the nearest authorized service provider.
  But you have another way to get own laptop preinstalled, use CD original Microsoft facilities. All the drivers, tools and utilities, you can find and download from Toshiba support site.

• Unable to sign on my MOTOBLUR account after the factory restore

  After seeing that I wasn't getting updated and no could not remove all the accounts on my CLIQ, I did a factory restore and tried to sign in with my existing MOTOBLUR account. An error message pops up saying that the session has expired or the password is incorrect.

  The password cannot be wrong, because I can access my account online. The message appears whenever I'm trying to connect. I use only a wifi connection.
  What should I do?

  To sign in blur, you will need to use 3G or wifi. You said you use wifi, make sure that the wifi icon is on the notification bar. If this is not the case, press menu and you can set it here when you register in blur of installation. If you still can not sign trying to join a 3G area, and then try again. The time-out error is saying that you don't send fast enough information on the server of blur. Password error appears but is not always the problem. If you arrive at sign always used the password and then follow the instructions to reset, then try again. Make sure that you use an e-mail address that you will be able to receive mail from.

• Problems with the 64-bit on Pavilion a6620f Vista Factory restore

  I had a hard drive failure and restoration on a new hard drive. The original HD is a 500 GB Seagate Barracuda 7200.11 model ST 3500620AS. The new HD is a 500 GB Seagate Barracuda 7200 model ST 3500641AS - RK. I bought a set of restore for this HP computer disks.

  First problem was that disk 1 does not start from the internal CD/DVD drive. My Seagate drive boots fine on the same drive! I used an external USB CD/DVD drive and restore disks worked well on that. I went through the process of factory restore and in the end, I get an error message "installing Windows could not configure Windows to run on this computer hardware." I tried to change the BIOS setting from ACHI and IDE to SATA RAID with no luck. I tried to unplug the USB CD drive before the first reboot. That no longer works.  I unplugged the internal CD drive and tried different combinations with no luck. Need help I have run out of things to try! Does anyone have any ideas/thoughts?

  Hello:

  I don't know how you can get your recovery discs to work.

  Looks like you have tried everything.

  I had problems with mine too and got the same error on a HP Elite 8200 desktop computer business

  It was the first time I've ever had a problem with recovery disks.  It's very frustrating.

  I have a workaround if all goes well, you can use to get Vista on your PC...

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• HP Pavilion a705w desktop xp - how to do a factory restore?

  Restore the default settings without a disk.

  Hello

  (1) is there a recovery on the computer partition?

  (2) is the Windows XP operating system is installed on your system?

  You can perform a factory restore using the recovery partition.

  Restore your computer: http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01874595&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=435558#n67

  Troubleshooting problems in Windows XP system recovery:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07144&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=435558#N71

  HP and Compaq Desktop PC: looking for recovery disks?

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07143&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=435558

  If you do not have windows XP CD, then I suggest you to contact HP and order for a recovery disc.

• Impossible factory restore

  I have HP desktop with vista home premium. ability to do factory restore has been eliminated. Since I have the product key, can I download a copy of Vista Home premium from microsoft and use my key?

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.