Transfer rate slow during the transfer of data on HARD drive

Similar Questions

• When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  depends on the speed, support USB 2.0, USB 2.0 ports, and with active BIOS settings

  (2) you can increase the speed, if your motherbaord has a USB 3.0 port and must be enabled in the BIOS

• Transfer of data from IDE drive to SATA Drive

  I have an old HP PC with an IDE hard drive, running windows XP.  I want to transfer data from hard drive to a newer HP Pavilion computer on windows Vista. Need instructions on how to transfer the data and what toos hardware and software are needed.

  Details of the recent PC (target PC) are:

  Type of hard disk: SATA.

  Model - A6160e CTO desktop PC / product nbr - gg754av / serial number MXG73501SZ.

  More old HP Pavilion PC:

  Hard disk type: IDE

  Preponderance of details:-cannot read the label! (about 7-10 years) [old and gray - sound like me!]

  Thank you all

  NY11563

  E-mail: [email protected]

  Hello

  There are limited resources,

  (a) use Data transmission cable, something like one of the following thread:

  http://au.price-selector.com/search?k=easy%20transfer%20cable & cid = 1-3-1-1-3

  (b) another option: buy an IDE HARD drive case and put the old HDD on it, you can transfer data and use it as a HARD drive external.

  Kind regards.

• recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the proce

  recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the processing of hundreds of images that I usually take on a weekly basis.  I bought a new faster laptop, but when I looked for the cd with the software of series and I couldn't find in the mess of Christmas.  I downloaded a trial version of lightroom and got, it works on my new laptop. Is there a way to access the serial number of my version already installed and insert it in the version of track to make it work for me?

  Myron

  If you take the time to register to your original with Adobe installation (which most people do not), you can log in to your Adobe account and get the serial number. If you use a Windows computer and still have access to the old computer where Lightroom is installed, you can do the following:

  1. in the window folder options, make sure that you are able to see hidden folders.

  2. go to the C:\ProgramData\Adobe\Lightroom folder.

  3. use Notepad to open the file, Lightroom 5.0 Registration.lrreg

  You will be able to retrieve your serial number of this file.

• Stor.e USB3.0 external base freezes Portege Z930 during the copy of data

  Dear users,

  It's time I have this problem: I bought the Toshiba Stor.e basic USB3.0 external HD, but I was always unable to use it at full speed.

  During copying of large files (hundreds of MB) the progress bar stops abruptly and the system becomes unstable: I can't stop the copy, or cancelled, or closing the window. I have to physically disconnect the HD so that return system and the file is never copied.

  I followed [this post | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69634&tstart=0] and installed the drivers intel updated (version 1.0.7.248), but I still feel the same question.

  Anyone have a similar problem and know any solution?

  Thank you very much

  da

  Hello

  To me, it looks like a HARD drive problem and not a question of system.
  It looks like interruptions in stream in the copying process and the system hangs.

  Have you tested if you get the same problems using another HARD drive?

• Transfer iTunes to external hard drive

  I transferred my iTunes library on an external hard drive (Seagate).  I would like to transfer CDs to laptop so that I can do it again on one of my iPod tunes.  There is no option for ' send to ' iTunes from the external hard drive.  I tried several times and failed.  I can listen to the music stored on the external hard drive but playing something other than iTunes.  I installed Win 10 (big mistake, but too late now) so I guess it's to play through their music app.  I also tried to send to the device Bluetooth drive external hard, but that no longer works.

  I plan to replace my Samsung laptop with a Macbook Pro I hope in the not-too-distant future, but for now, I'd like to tell me if it is possible to transfer iTunes from external hard drive to my laptop existing back.  He drives me crazy not less because you have probably guessed I am somewhat of a technophobe.

  Thanks in advance.

  An iTunes library is an index of media stored on your computer that has been added to the library. iTunes has to know where the files are located in order to transfer them to your device. If the albums in question do not appear in your library and then use the menu file > add folder to library to add them, and then either make them slide to the device if handled manually on the base, or adjust the synchronization settings as required, and synchronize.

  See make a library of portable split to some general information about the layout of iTunes library. According to what you have copied where in the place where exactly, and what you see currently listed, you may want to shift-Start-iTunes and open the database stored on the external hard drive or maybe copy the whole folder iTunes from the outside to the inside, or you can create a library laptop from scratch on the outside, if there only your media.

  TT2

• Transfer XP to new hard drive.

  My old computer has 20 GB hard drive with Windows XP installed in the store. Install the new 320 GB drive. How can I transfer XP to new hard drive? It is a legal registered copy of XP & I have the product key but not the disks.

  Norton Ghost version 15 - has a 30 day trial available
  http://www.Symantec.com/Norton/Ghost
  Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
  (Trial does not allow you to create a restore CD)
  http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
  User Guide: ftp://ftp.symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.pdf

  Acronis True Image 2011 - has a 30 day trial version available,
  (Install Acronis and then create a restoration/Rescue CD Media before starting the creation of an image backup)
  http://www.Acronis.com/homecomputing/products/TrueImage/
  The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
  True Image User Guides and documentation:
  http://www.Acronis.com/homecomputing/download/docs/

  Product review
  http://www.PCWorld.com/reviews/product/384118/review/Norton_Ghost_15.html
  Ghost 15 screenshots:
  http://www.Softpedia.com/get/system/back-up-and-recovery/Symantec-Norton-Ghost.shtml

  Acronis True Image Home 2011 product review:
  http://www.whatsabyte.com/P1/ATI_2010_Review.html
  http://www.allacronis.com/Acronis-True-Image-home-review.php

  Acronis True Image Seagate Edition (drive Assistant)
  http://www.Seagate.com/www/en-us/support/downloads/DiscWizard

  Acronis True Image edition of Western Digital (WD)
  http://support.wdc.com/product/downloaddetail.asp?Swid=119&type=download&wdc_lang=en

  Not tested or free alternatives:
  EASEUS Todo Backup
  http://www.TODO-backup.com/

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.htm

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Security of the data to hard drive replaced under warranty

  My laptop is fixed by virtue of the extended due to a hard drive failure warranty. HP has no problem, replace the defective drive. However, I asked that they return the drive failed for me, because it contains personal data and I want to make sure it is properly destroyed. They refuse to send me the original drive, unless I have pay $290 for it. Otherwise they will simply ship the laptop to me not repaired.

  I am very hurt to her comfortable while simply trust that the reader will be well destroyed. I hear too many stories on data personal discs playing in landfills or elsewhere. I don't know that it would happen to HP, but then I don't know it won't, either, and it is not a value of potential risk.

  Does anyone know what HP is doing to "destroy" a hard drive? Alternatively, anyone has any advice on how to convince HP to return my hard drive of origin for no additional cost, as it should be without me having to jump through hoops?

  I can assure you that all personal data is secure when HP parts for refurbished devices used. HP treats thousands of thousands of pieces per day. Unless your failed hard drive is labeled "TOP SECRET" noone will give him a second glance. It merely add to the line, dismantled and the parties go into hp quality tests where they create parts for refurbished devices. The trays are too sensitive for them to be swapped around without a clean room. They are destroyed. probably thrown in a dumpster somewhere. Once that any type of dust gets on the trays the discs are unreadable, even if they have been good before he was saying-assembled. It is not cost-efficiant to slow production just to get the trays on a hard drive in a clean room. It is easier to throw away them and have a machine to replace

• How can you save data of the iCloud on an external hard drive?

  How can I record data of the iCloud on an external hard drive?

  Is not possible. iCloud requires a Wi - Fi connection to synchronize data. Cannot do it on an external drive.

• Is it possible to extract personal folders from my hard drive and transfer to an external hard drive if Windows does not start?

  Hello, I recently started my Windows XP Dell computer and it should start up normally unless it would run the ChkDsk utility. It would freeze then 68% on stage 1 and goes no further. I called the people of Dell and after trying so many solutions, including safe mode, safe mode with network and CommandPrompt, we ran the diagnosis. The hard drive and memory are fine, no errors. He concluded that it was the operating system and must be restored. However, I have important files, I need to extract from my hard drive and he recommended me an external hard drive. I bought it, but now I'm not sure how to extract my files from my drive hard if Windows can not even boot the desktop computer. Is it possible to extract these files without the use of the desktop computer?

  And you've burned the .iso image, and not as data? If Yes, then you have created a bootable CD. Put it in your optical drive and restart the computer. You may need to change the boot order in your BIOS. With some machines, you can get a temporary startup command menu by pressing a function such as F12 at startup. Other computers require that you enter setup and change the boot order in the optical drive first of all from there. When you start your computer it will be information about which key press to enter the BIOS (Setup) or give you the temporary boot order.

  After you changed the boot order to boot first from the CD and rebooted the computer, Knoppix will boot. Have your external hard drive connected to the computer before you start doing this. After Knoppix is finished booting, you will be in his office. It will be very similar to Windows. There are icons on the desktop for your internal hard drive and the external hard drive. Copy files from the internal to the external drive as you want. Review what I wrote about the use of Knoppix in my previous answer. MS - MVP - Elephant Boy computers - don't panic!

• Discover the usb hub and my hard drive speed.

  I would like to ask in this forum. I have a Seagate 1 TB external hard drive backup more USB 3.0. First when I bought the transfer speed still very well and I don't worry. After a few months, my data put in also increased as much time to something else as long as it is important to keep. The problem is that my hard drive now transfer data as slow as a snail. There just get 1 Mbps of transfer speed (only in my laptop, in all the hub in my laptop). When I plug it into another computer, it's fine running at 20 and 40 MB/s as normally as USB 2.0 wired hub. Another hard drive that plugged into my laptop works very well, so I guess that only my hard drive is never play well with my laptop, so that they begin to work ppliquee. I searched many tutorials that help me to solve the problem, but no one worked for me.

  Is it possible to solve my problem as something to change or update?

  I can't blame time my hard drive or my laptop because they are good, but if they linked together they do not work normally.
  I hope that all who read this can make suggestion or give a way to solve it. Thank you very much...

  Problem is a little Tricky and make me confusion

  However try to reinstall the USB 3.0 hub and USB drivers

  As you said the other disk HARD running at good speed, then the problem with your HARD disk and your computer

  Try the HDD running Test by downloading HDTUNE PRO and check the report of HDD health

• Restore the backup to an external hard drive

  original title: if I reinstall my Vista, how to make the backup on an external hard drive? Is it a procedure drag-and - déposer? I use a Seagate external hard drive and there is no help section.

  Have run the back up to the external hard drive, I would like to know how to use it when I reinstall Vista Home Premium system.

  Also, I tried to check the hard disk for errors, and he has not finished the event.

  Assuming that you used the backup of Vista and made program a full backup and not an image backup (although some of these procedures include the restoration of a full image backup), here is some information to help you restore data.  Try to read or at least most of the analytical documents before you start, so you get a good understanding of the process and the procedures involved.  Restoring from an external hard drive is a little different from restoring a secondary internal hard drive, CD/DVD or Flash drive or on the network (although quite close to the procedure of network). If you have used the Vista backup program, you can not restore using drag-and-drop - you must use Vista restore program.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works and even when it does not).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook Windows xp sp3 home.

  I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook.

  I tried to connect my netbook to a sony bravia tv and I pressed the power button to restart because it was so slow awakening of the mode standby
  I am running windows xp home sp3. What should I do?

  Hi samp2000,

  Follow the steps in this article to resolve the problem:

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

• My hard drive is filling up all the available space on my hard drive

  Original title: my drive is 'eat' himself!

  Something happens in my system which occupies all the available space on my hard drive.

  I deleted everything that I possible can, but as soon as I create a space that it disappears.

  There is apparently a function involving my e-mail archives or my installation "restore."

  Recreate the data but do not delete the file/data who is who replaces it.  What has

  happened in the past, but at that time, it was the result of my control one inadvertently

  email replication function... this time I got nothing done to cause this duplication of work.

  When it started to affect my system this time I looked for things to remove and found

  many of my emails in the "sent" folder had been duplicated.  I immediately removed all

  These duplicates and has acquired an important place but in a short period of time the

  disc had been filled again.

  I ran anti-virus (McAfee) and combating malicious programs (Malwarebytes) without finding

  anything that can be causing my problem.

  Thanks in advance for any help.

  Hello

  Try the methods provided following and check if that helps:

  Method 1:

  Try to run the disk cleanup tool and check if it helps:

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2:

  Read the following article and see if it helps

  Computer viruses: description, prevention, and recovery

  http://support.Microsoft.com/kb/129972

  Also check out the link and check if it helps:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• How to reset the password forgotten on external HARD drive

  Hello

  I forgot the password of my external hard drive.
  How can I reset this?

  It has all my photos out there I want to come back.

  The external HARD drive comes with software that the password. Have you used this software?

  I m not very well what HARD drive you have exactly, but in the case of the password disk HARD unknown could be deleted, so I guess that by using such software.

  But I'm afraid, this is not possible and if yes, then secure files could serve more than m.

  I say it in a different way: password protection would be useless if you can remove any unknown or forgotten password. Don't you think?