Transition from UNIX to RMAN environment variables fails

Similar Questions

• Transition from Unix to an anonymous block variable

  Hello..
  
  Any1 can tell me how to pass a variable to a Pl Sql anonymous block unix
  var1 = "grep"a"$cmdfile |" nawk f «;» '{print $2} ' | TR-s ' ' | cut-d ""-f2 "
  var2 = "grep"b"$cmdfile |" nawk f «;» '{print $3} ' | TR-s ' ' | cut-d ""-f2 "
  
  So when I write an anonymous block how to pass these values var1 and var2?
  Thanks in advance

  I don't know how would be an anonymous block will be useful for any application. We generally use stored procedures and for this case, we have used to refer to the unix variable as below.

  execute stored_proc_name unixvar1 unixvar2
  

  and in the code

  create or replace procedure stored_proc_name... ...
  begin
  unixvar1:=&1;
  unixvar2:=&2;
  end;
  

  I hope this helps.

• v$ session interpreted as environment variable under unix

  Hi all
  I want to run a Unix shell script sql command, which queries a table v$ session. I enclose the script below.
  
  

  VI a2.sh

  #!/bin/sh
  echo "collect stat"
  sqlplus -s usr_name/pwd@orcl<<EOF
  select ss.username,se.SID,VALUE/100 cpu_usage_seconds from v$session ss,v$sesstat se,v$statname sn where se.STATISTIC# = sn.STATISTIC# and NAME like '%CPU used by this session%' and    se.SID = ss.SID and    ss.status='ACTIVE' and ss.username is not null order by VALUE desc;
  EOF

  My output is:
  
  

  A2.sh

  collect stat
  select ss.username,se.SID,VALUE/100 cpu_usage_seconds from v ss,v se,v sn where se.STATISTIC# = sn.STATISTIC# and NAME like '%CPU used by this session%' and se.SID = ss.SID and    ss.status='ACTIVE' and ss.username is not null order by VALUE desc
                                                                       *
  ERROR at line 1:
  ORA-00942: table or view does not exist

  Someone could suggest me, is it possible in what way I can put all the variables or changes environment oracle/unix and oracle installation can understand that it is a table name and not an environment variable?
  
  I have the script running with '-' as an escape character in front of the ' $'. I wanted to know if there is another way.

  You use here document, so you have the choice - either escape you each shell simple metacharacter in document here as already suggested, or get away just like below:

  [oracle ~]$ cat t.sh
  #!/bin/sh
  echo "collect stat"
  sqlplus -s scott/tiger@O11202<<\EOF
  select ss.username,se.SID,VALUE/100 cpu_usage_seconds from v$session ss,v$sesstat se,v$statname sn where se.STATISTIC# = sn.STATISTIC# and NAME like '%CPU used by this session%' and    se.SID = ss.SID and    ss.status='ACTIVE' and ss.username is not null order by VALUE desc;
  EOF
  
  [oracle ~]$ ./t.sh
  collect stat
  
  USERNAME                              SID CPU_USAGE_SECONDS
  ------------------------------ ---------- -----------------
  SCOTT                                 149                 0
  SCOTT                                 149                 0
  SCOTT                                 149                 0
  SCOTT                                 149                 0
  

  So, escaping from the EOF of the document means here, all included metacharacters are ignored.

  Best regards

  Maxim

• The system is unable to boot automatically. The BOOT environment variable must be set to a bootable image.

  Hey guys

  I need help, in my company trying to learn switches I flashed my switch all :(

  I now get this error

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  I downloaded the c2950-i6q4l2 - tar.121 - 22.EA14.tar for the switch, but I'm unclear on how to load the catalyst 2950 only

  switch: dir flash:
  Directory of flash: /.

  3 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch:

  C2950 Boot Loader (C2950-HBOOT-M), Version 12.1 (11r) EA1, RELEASE SOFTWARE (fc1)
  Updated Tuesday 22 July 02 17:18 by antonino
  WS-C2950-24 from...
  Basic Ethernet MAC address: 00:15:2 b: 46:7 b: 00
  XMODEM file system is available.
  Initializing the Flash...
  flashfs [0]: 1 files, directories 1
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 7741440
  flashfs [0]: used bytes: 1536
  flashfs [0]: available bytes: 7739904
  flashfs [0]: fsck flashfs takes 4 seconds.
  .. .done boot flash.
  Boot sector file system (bs :) installed, isfd: 3)
  Setting Filesystem block (pb :) installed, isfd: 4)
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  switch:
  switch:
  switch: flash
  Initializing the Flash...
  ... The flash is already initialized.
  switch: dir /.
  Unknown cmd: dir /.
  switch: dir

  List of currently registered file systems:

  Flash [0]: (reading / writing)
  XMODEM [1]: (read-only)
  NULL [2]: (reading / writing)
  BS [3]: (read-only)

  switch: 0
  Unknown cmd: 0
  switch: flash_init
  switch: load_helper
  switch: dir flash:
  Directory of flash: /.

  2 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch:

  Hello

  It seems that the image is not in the flash memory. Do you know where you downloaded the image? Once we know, we can understand what statement of startup, you need to do to make it start correctly.

  Thank you

  Garrett

• ORA-07217: sltln: environment variable cannot be evaluated.

  Hi all;
  

  
  

  DLOG = 'date + "a_ hour" ' export DLOG

  
  

  RMAN > backup backupset incremental compressed level 0 DATABASE FORMAT ' / u04/oradata/PDT003/weekly_bkp_$ (DLOG)'

  TAG WEEKLY_BACKUP INCLUDE CURRENT CONTROLFILE;

  
  

  Please watch this above command of rman backup that I run with a bash script. It gives me following error.

  
  

  channel ORA_DISK_1: starting piece 1 at 18 - SEP-15

  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 18/09/2015 03:21:19

  ORA-07217: sltln: environment variable cannot be evaluated.

  No idea how to overcome? He took my 3 days from now.

  Hello

  1. it is tag format that should be unique - http://docs.oracle.com/cd/B28359_01/backup.111/b28273/rcmsubcl010.htm

  Check out the demo below, the sound works perfectly for me

  #! / bin/sh

  DLOG = ' date + «a_ hour»»
  Export DLOG
  echo "setting of my variable: $DLOG"

  echo "launched backup."

  RMAN target /.<>
  backup incremental backupset compressed level 0 FORMAT of DATABASE ' / u03/backup/weekly_bkp_$ (DLOG)' TAG WEEKLY_BACKUP INCLUDE CURRENT CONTROLFILE;
  "exit";
  EXPRESSIONS OF FOLKLORE

  echo "Backup complete".

  Wrong Code always my backup script - test scenario
  =================================

  [backup oracle@primary] $ sh test.sh
  My variable definition: a_19
  Backup started
  test.sh: line 9: DLOG: command not found

  Recovery Manager: release 11.2.0.3.0 - Production Wed Sep 23 19:46 2015

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: PROD (DBID = 300203881)

  RMAN >
  From backup to 23-SEP-15
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 37 type device = DISK
  channel ORA_DISK_1: starting from compressed backup set incremental level 0 datafile
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  Enter a number of file datafile = 00001 name=/u03/prod/prod_pr/system01.dbf
  Enter a number of file datafile = name=/u03/prod/prod_pr/sysaux01.dbf 00002
  Enter a number of file datafile = 00005 name=/u03/prod/prod_pr/example01.dbf
  Enter a number of file datafile = name=/u03/prod/prod_pr/undotbs01.dbf 00003
  Enter a number of file datafile = name=/u03/prod/prod_pr/users01.dbf 00004
  channel ORA_DISK_1: starting piece 1 to 23 - SEP-15
  channel ORA_DISK_1: finished piece 1 to 23 - SEP-15
  total, handle = / backup/u03/weekly_bkp_ tag = comment WEEKLY_BACKUP = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:55
  channel ORA_DISK_1: starting from compressed backup set incremental level 0 datafile
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  including the current control in the backup set file
  including current SPFILE in the backup set
  channel ORA_DISK_1: starting piece 1 to 23 - SEP-15
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 23/09/2015-19:46:59
  ORA-19504: cannot create the file ' / u03/backup/weekly_bkp_.
  ORA-27038: created file already exists
  Additional information: 1

  RMAN >

  Complete recovery manager.
  Backup is complete

  RMAN > list backup;

  using the control file of the target instead of recovery catalog database

  List of backup sets
  ===================

  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  1 incr 0 M DISK 00:00:49 23-SEVEN 289,91.-15
  BP key: 1 location: AVAILABLE Tablet: YES Tag: WEEKLY_BACKUP

  [backup oracle@primary] $ ls-l
  Total 296888
  -rwxr-xr-x. 1 oracle oinstall 317 23 Sep 19:45 test.sh
  -rw - r-. 1 oracle oinstall 304005120 23 Sep 19:46 weekly_bkp_

  backup incremental backupset compressed level 0 DATABASE FORMAT ' / u03/backup/weekly_bkp_$ (DLOG)' TAG WEEKLY_BACKUP INCLUDE CURRENT CONTROLFILE;... WrongCode of $(DLOG)

  Fix the Code - test scenario 2
  ==============
  1 code .fixing now
  2. change of $(DLOG)... $DLOG

  RMAN target /.<>
  backup incremental backupset compressed level 0 DATABASE FORMAT ' / u03/backup/weekly_bkp_$ DLOG' TAG WEEKLY_BACKUP INCLUDE CURRENT CONTROLFILE;

  [backup oracle@primary] $ sh test.sh
  My variable definition: a_19
  Backup started

  Recovery Manager: release 11.2.0.3.0 - Production Wed Sep 23 19:48:58 2015

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: PROD (DBID = 300203881)

  RMAN >
  From backup to 23-SEP-15
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 27 type device = DISK
  channel ORA_DISK_1: starting from compressed backup set incremental level 0 datafile
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  Enter a number of file datafile = 00001 name=/u03/prod/prod_pr/system01.dbf
  Enter a number of file datafile = name=/u03/prod/prod_pr/sysaux01.dbf 00002
  Enter a number of file datafile = 00005 name=/u03/prod/prod_pr/example01.dbf
  Enter a number of file datafile = name=/u03/prod/prod_pr/undotbs01.dbf 00003
  Enter a number of file datafile = name=/u03/prod/prod_pr/users01.dbf 00004
  channel ORA_DISK_1: starting piece 1 to 23 - SEP-15
  channel ORA_DISK_1: finished piece 1 to 23 - SEP-15
  total, handle = / backup/u03/weekly_bkp_a_19 tag = comment WEEKLY_BACKUP = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:55
  channel ORA_DISK_1: starting from compressed backup set incremental level 0 datafile
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  including the current control in the backup set file
  including current SPFILE in the backup set
  channel ORA_DISK_1: starting piece 1 to 23 - SEP-15
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the backup command on the ORA_DISK_1 channel to 23/09/2015-19:49:56
  ORA-19504: cannot create the file ' / u03/backup/weekly_bkp_a_19.
  ORA-27038: created file already exists
  Additional information: 1

  RMAN >

  Complete recovery manager.
  Backup is complete
  [backup oracle@primary] $ ls - tl
  296924 total
  -rw - r-. 1 oracle oinstall 304046080 Sep 23 19:49 weekly_bkp_a_19 - naming convention good code wise but not with the prospect of rman
  -rwxr-xr-x. 1 oracle oinstall 315 23 September 19:48 test.sh

  Now the format that we cannot solve the format fixed for rman, you need to change it if you see above error
  Change to generated %U...system

  Test case 3 - worked perfectly

  RMAN target /.< eof="">
  backup incremental backupset compressed level 0 FORMAT of DATABASE ' / u03/backup/weekly_bkp_${DLOG}_%U' WEEKLY_BACKUP TAG INCLUDE CURRENT CONTROLFILE;.. reason format

  [backup oracle@primary] $ sh test.sh
  My variable definition: a_19
  Backup started

  Recovery Manager: release 11.2.0.3.0 - Production Wed Sep 23 19:53:02 2015

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: PROD (DBID = 300203881)

  RMAN >
  From backup to 23-SEP-15
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 36 type device = DISK
  channel ORA_DISK_1: starting from compressed backup set incremental level 0 datafile
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  Enter a number of file datafile = 00001 name=/u03/prod/prod_pr/system01.dbf
  Enter a number of file datafile = name=/u03/prod/prod_pr/sysaux01.dbf 00002
  Enter a number of file datafile = 00005 name=/u03/prod/prod_pr/example01.dbf
  Enter a number of file datafile = name=/u03/prod/prod_pr/undotbs01.dbf 00003
  Enter a number of file datafile = name=/u03/prod/prod_pr/users01.dbf 00004
  channel ORA_DISK_1: starting piece 1 to 23 - SEP-15
  channel ORA_DISK_1: finished piece 1 to 23 - SEP-15
  total, handle = / backup/u03/weekly_bkp_05qht9kv_1_1 tag = comment WEEKLY_BACKUP = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:55
  channel ORA_DISK_1: starting from compressed backup set incremental level 0 datafile
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  including the current control in the backup set file
  including current SPFILE in the backup set
  channel ORA_DISK_1: starting piece 1 to 23 - SEP-15
  channel ORA_DISK_1: finished piece 1 to 23 - SEP-15
  total, handle = / backup/u03/weekly_bkp_06qht9mm_1_1 tag = comment WEEKLY_BACKUP = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:01
  Backup finished 23-SEP-15

  RMAN >

  Complete recovery manager.
  Backup is complete
  [backup oracle@primary] $

  [backup oracle@primary] $ ls - tl

  Total 298188

  -rw - r-. 1 oracle oinstall 1097728 23 Sep 19:58 weekly_bkp_a_19_08qht9v5_1_1

  -rw - r-. 1 oracle oinstall 304242688 23 Sep 19:58 weekly_bkp_a_19_07qht9te_1_1

  -rwxr-xr-x. 1 oracle oinstall 320 23 September 19:57 test.sh

  It could be that useful now

  -Pavan Kumar N

• "Call the executable" allows the environment variable "path"?

  Hello

  It seems that when you use the step type "call the executable" you need to enter the absolute path of the executable, or the absolute working directory, in the definition of "call settings" step.  I seem not to be able to put in a *.exe by himself in the path and have the command is found, even if I can't enter this same command on the command line (windows 7).  Is it possible to configure this step to use the windows ' path' environment variable to search for the executable?

  David J.

  You can do the following:

  (1) specify cmd.exe for the file path.

  (2) specify "/c yourexe.exe" for the argument expression

  This will launch a command window and tell it to run your application with the simple file name.

  The reason why you can't put just yourexe.exe in the path of file is that TestStand made its own resolution of file path that is different from what the window command. It uses its directories to search to resolve relative paths. If you do not have to specify an absolute path for the file path parameter, but it must be compared to a TestStand search directory or the current sequence file.

  Hope this helps,

  -Doug

• How to programmatically change the environment variables

  I use Visual Source Safe commands in the context menu of Windows Explorer, and I often have to change VSS to the other database. I uses .reg files to change the value of the variable SSDIR. The registry editor displays the new value immediately after the call to the .reg file. However, the system does not seem to actually recognize the change, unless I open my computer properties to Environment Variables, and then click OK.

  How can I make an immediate change to a variable user permanently without enter in the properties of my computer?

  Ken Frantz
  New York State Office of Mental Health
  Business Intelligence Office
  E-mail address is removed from the privacy *.
  518-474-3079.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience of developers on MSDN. Please ask your question in the Forum of SourceSafe and Visual Studio Source code control. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/vssourcecontrol/threads

• Using an environment variable in a shortcut on the desktop

  I would like to create a shortcut on the desktop that uses part of the environment variable in the "Target" text box  I need to do this because the location of the program may vary from one site to the other.  I would like to be able to type the following:

  (\BestPractices\BP.mdb Y:\[MID(%HomeShare%,29,7)]

  HomeShare is an environment variable.  But the name of the folder is the 7 characters starting at position 29.  I would like to avoid having to do this in a batch file or other external utility.

  Thank you

  Well, no, it won't work.  Why not set up the database using the Runtime to create its own folder? --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Contradictory in the software environment variables

  Full restore after migration from NT network software. Vista still loading root and TEMPORARY and other files after recovery of reloadnd. How to remove all the NT Authority and values conflict not for Vista?

  Written System Information report to the: 04/02/10 14:46:39
  System name: DANIEL-PC
  [Environment variables]

  Value of the variable username
  ComSpec %SystemRoot%\system32\cmd.exe 
  NO. FP_NO_HOST_CHECK 
  NUMBER_OF_PROCESSORS 2 
  OnlineServices Services online 
  Windows_nt OS 
  PATHEXT .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC 
  Pavilion PCBRAND 
  PLATFORM MCD 
  PROCESSOR_ARCHITECTURE x 86 
  PROCESSOR_IDENTIFIER x 86 family 15 model Stepping 1 AuthenticAMD 104 
  PROCESSOR_LEVEL 15 
  PROCESSOR_REVISION 6801 
  C:\Program Files\Common SharedCOM Shared\9.0\Roxio Central33\ RoxioCentral 
  %SystemRoot%\Temp TEMP 
  TMP %SystemRoot%\TEMP 
  SYSTEM USERNAME 
  E: USERPART 
  windir % SystemRoot % 
  TEMP %USERPROFILE%\AppData\Local\Temp NT AUTHORITY\SYSTEM
  TMP %USERPROFILE%\AppData\Local\Temp NT AUTHORITY\SYSTEM
  TEMP %USERPROFILE%\AppData\Local\Temp Daniel-PC\Daniel

  Hi mtgbiker,

  (a) what exactly you are trying to do?

  (b) is connected to the domain of the computer?

  Please provide more details about your question.  If you feel that your system is unstable, you can use SFC (System File Checker) scan utility, which allows administrators to perform an analysis of all protected resources to make sure they are the correct version.

  Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:

  (a) click Start and in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  (b) at the command prompt type sfc/scannow , and then press ENTER.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Oracle installation path environment variable

  Original title: 7 Edition windows path environment variable home premium

  Hi, I'm installing personal oracle on my computer. He told me that the 'PATH' environment variable will be too long if oracle is added to it. Here is the curremnt path:

  C:\Program Files\Common Files\Microsoft Shared live; C:\Program Files (x 86) \Common Files\Microsoft Shared Live;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \Windows Live\Shared; C:\Program Files (x 86) \Microsoft SQL Server\100\Tools\Binn\; C:\Program Files\Microsoft SQL Server\100\Tools\Binn\; C:\Program Files\Microsoft SQL Server\100\DTS\Binn\; c:\Program Files (x 86) \Microsoft SQL Server\100\DTS\Binn\; c:\Program Files (x 86) \Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\; C:\Program Files (x 86) \Common Files\Roxio Shared\DLLShared\; C:\Program Files (x 86) \Common Files\Roxio Shared\9.0\DLLShared\; C:\Program Files (x 86) \Common Files\Roxio Shared\DLLShared\; C:\Program Files (x 86) \Common Files\Roxio Shared\13.0\DLLShared\; C:\Program Files (x 86) \Microsoft ASP.NET\ASP.NET Web Pages\v1.0\; C:\Program Files\MySQL\MySQL Server 5.1\bin; C:\Program Files (x 86) \QuickTime\QTSystem\; C:\Microsoft SQL Server Migration Assistant for Access\bin\

  If I remove anything in the path, it will cause do not run programs? also, is there something that I should not remove?

  Thank you.

  Hello

  It seems to be a problem is with Oracle, so I suggest you get in touch with support for Oracle from the link below.

  https://support.Oracle.com/CSP/UI/Flash.html

• How to activate the form 12 c forms_http_proxy_host Environment Variable?

  Hi all

  I tried to make the new visible useful Proxy address. That's why I added:

  < PARAM NAME = "FORMS_HTTP_PROXY_HOST" VALUE = "% FORMS_HTTP_PROXY_HOST" >

  FORMS_HTTP_PROXY_HOST = '% FORMS_HTTP_PROXY_HOST '.

  for the webutil_jpi and Basic Environment Variables.

  When I call the form via the Proxy the Variable empty Tin.

  Someone at - it an idea how to operate?
  What was missing? Or are they called differently?

  I also tried "get_application_property" with no success.

  Here is a list of the parameters of the new...

  FORMS_HTTP_PROXY_HOST

  FORMS_HTTP_PROXY_PORT

  FORMS_HTTPS_PROXY_HOST

  FORMS_HTTPS_PROXY_PORT

  FORMS_PROXY_BYPASS

  Here are the environment variables and not the applet parameters.  They are defined in default.env.  The purpose of these is similar to Proxy Server settings in your browser.  For example, if your Oracle Forms environment called Oracle publication BI-serveur, which is hosted on a server that is separate from the Forms Server through a proxy, then you may need to use these variables.

  Note that they only be used by the queries associated with executing JVM process server-side.  This includes forms to BI-Publisher and imported Java calls.

• Settings of Environment Variables for db and eom12c

  Hello

  I'm sorry to ask such a simple question but I can't seem to
  Nowhere is this.

  I installed the database (11.2.0.4) and OEM12C (12.1.0.4) on the
  same server (windows 2012) and I would like to know what it is recommended

  settings of environment variables would be for the database and eom1212c?

  Thank you!

  Kathie

  This isn't a rare question at all, especially with the introduction of EM12c, where new framework benefits from new alias in the profile or (for Windows environments) variables settings approx.

  Set up your:

  ORACLE_HOME for the database at home, i.e. /u01/app/oracle//product/11.2.0/dbhome_1

  ORACLE_SID =

  Then set up a few aliases to facilitate management:

  OMS_HOME = / u01/app/oracle/Middleware<--EM>

  EMDIAG_HOME = / u01/app/oracle/repvfy<--diagnostics home="" if="" you="">

  AGENT_HOME = / u01/app / /officer of/core/12.1.0.4.0<--agent>

  JAVA_HOME = / usr/java/bing/jre7<--java home="" which="" comes="" in="" handy="" for="" diagnostics="" and="">

  Your values for each of them will be probably different for the path of the beginning, but you should get the idea pretty quickly.

  Let me know if you need anything else, be it

  Micheline

• get the oracle environment variables by using the plsql code

  Hey Geeks,
  
  Can someone tell me how to get an environment variable Oracle (for example db_cache_size) from inside a plsql code or via a sql query block?
  
  Thank you
  Prabhu

  You can query the parameter$ v.
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/dynviews_2012.htm#REFRN30176

  select * from v$parameter where name like '%cache%';
  

• Error message: PRVF-3929 - PATH environment variable.

  Hello
  
  I'm trying to install Oracle on my laptop and get the following error message resulting in installation hault.
  
  INFO: *********************************************
  NEWS: Environment Variable: 'PATH': this test checks if the length of the 'PATH' environment variable does not exceed the recommended time.
  INFO: Severity: CRITICAL
  INFO: OverallStatus:VERIFICATION_FAILED
  INFO: -----------------------------------------------
  INFO: Results of the audit for node: JF - PC
  NEWS: Expected value: 1023
  NEWS: Real value: 1159
  INFO: Error Message: PRVF-3929: adding location of Oracle binary in the PATH environment variable exceeds the length limit of the BONES of "1023" for the variable on node "JF - PC."
  INFO: Cause: the installer must update the environment variable PATH to include the value of '% ORACLE_HOME%/bin';.
  However, this will cause a path exceeds the maximum allowed length that allows the operating system.
  INFO: Action: make sure that the sum of the length of your current PATH environment variable and one of
  "% ORACLE_HOME%/bin;" does not exceed the limit of the operating system.
  Restart Setup after correcting the value of environment variable.
  
  
  Installation of the ton tent of the Oracle database - win64_11gR2
  
  MY PC CONFIGURATION:
  -Windows 7
  -64-bit
  
  Can you please help me get this resolved please.

  The following information appears to be linked: http://support.microsoft.com/kb/830473

  According to the link above, the maximum length of the PATH environment variable is 2048/8192 characters. Apparently the length has been increased to 2048 from Windows XP SP2. Your current path is about 1200 characters that is less than the limit of the OS.

  The Oracle installer is incorrect about the PRVF-3929 error message? Or if the length of the path environment variable is not the real problem? Maybe you can try temporarily shorten the path and add the full pathname after the installation of Oracle.

  You should be able to modify the path as follows:
  From the desktop, do a right click my computer, and then click Properties.
  In the System Properties window, click the Advanced tab.
  In the Advanced section, click the Environment Variables button.

  Using Windows 7 Professional? If the error message occurs even with a short path, then maybe there something else trigger this error, as the antivirus or other security software.

  Published by: Dude on July 3, 2011 11:15

• Backup of the System Environment Variables

  How can I save variables on a windows system? The HYPERION_HOME and EPM_ORACLE_HOME system variables the same?

  If it's windows, then I find the best way is to either back up the registry or the part of registry, environment variables are stored in the registry to: -.
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Environment

  So, if you go to start > run > regedit > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment > right, click Export, save it out in a registry file.

  The registry can also be exported from the command line, for example to go to a command prompt and type
  REG EXPORT /?

  See you soon

  John
  http://John-Goodwin.blogspot.com/