transpose

Similar Questions

• Transpose lines / columns entered for Matrix

  Hi all

  Read a few pages on the forums of the community about me little challenge, but come to the conclusion that using the OFFSET would be the way to go, but I'm struggling with the syntax. Maybe, I'm thinking of it (Note: similar to copy paste n + transpose into excel). The idea is to, first, build the frame of the matrix by using the information in table 1 and 2 below, then laster, fill the inter connection of cells with the data of table 2.

  The first step is to transpose the first two columns of table 2 for the columns in a table (highlighted) two first is OF 2 + is the main reference OF-3 and this is the main reference and so on.

  The number of entries in table 2 will increase with time, so it's easy to update with here simple fill.

  Played with "SHIFT" without success - based on a similar problem posted on an earlier version of numbers / iWorks. So, I am convinced it can be done this way - of ideas or suggestions would be very welcome.

  Thanks in advance

  Perry

  

  Select the source table (shifts right in your screenshot), then select the menu item "Table > transpose the rows and columns."

  now, select the area you want to move, copy

  now select the destination, the dough

• where can I find the midi transpose plugin?

  where can I find the midi transpose plug-in in mainstage 3?

  Look in the channel strip > MIDI FX. Click on the box and select from the menu. You can also transpose travel of channels in the channel strip Inspector. Select a channel, and then in the channel strip Inspector, MIDI input.

  

  

• transpose a simple loop

  I just want to transpose a simple loop, keeping unchanged the tone of the whole composition. In the area of the region, I found 'transpose', but I can just change more or less 12 1/2 tones...

  Hello

  Double click just to the right of the word transposes and enter the conversion you want in semitones, or click and drag vertically

  

  TDC

• transposed matrix form?

  How will I know what form a table is a long section of the mathscript code? IE is a table one row or column, or a matrix. Often, I get the error that produced the home, regardless of what form, I develop controls in.

  I really need an accurate way to determine the form, rather than clamping functions transpose randomly.

  Thank you

  
  

• MathScript transpose a table 1 d?

  Hello

  I had a problem with some Mathscript stuff, but I've found a workaround. Problem now is that I do not understand why the workaround works...

  I put a table of column 1 d in a Mathscript node and without him doing anything out. BUT the output has been transposed. If I get a 2D picture, but always with only the values in the first column, it doesn't. Took me forever to figure this out, but it is not really make sense to me why he would flip the 1 d like that. I tried and I got this:

  'The MathScript node and the node of MATLAB script manage 1 d table entered only online'

  from here: http://zone.ni.com/reference/en-XX/help/371361D-01/lvconcepts/scriptnodes/

  This means that whenever I want to use a table 1 d with Mathscript I have to assume that no matter what happens, it goes immediately to get transformed into a line by Mathscript? Is this a bug or is it on purpose? I have attached a VI to demonstrate it better than I can explain it.

  I use 8.6 btw.

  Thank you.

  Hello

  This behavior is by design.  To understand this better, consider what you wrote: "I put a table of column 1 d in a Mathscript node...". "LabVIEW is not the notion of rank compared to the tables of the column.  You can resize your table T to something and then extend it horizontally.  This only changes the display of the data, not anything with the representation internal.  The help text that reference you also gives the workaround solution to transpose the table once it's in the MathScript node, but as you have discovered, work with 2D arrays will also work around the problem.

  You're right: any table 1 d entering a MathScript node will be treated as a vector of the line.  Yet once, since LabVIEW does not differentiate between the two, we have made the choice to treat incoming arrays as vectors in MathScript.  Treat them as column vectors would be also bad 50% of the time, if unfortunately there is not much we can do until LabVIEW allows you to specify the orientation of the vector.

  Grant M.
  Staff software engineer | LabVIEW Math & Signal Processing | National Instruments

• Transpose a table 1 d?

  

  The picture is pretty self explanitory, the 'build' table takes these 4 paintings of entry and puts them one after the other horizontally.

  My problem is that the 4 Bay entering the 'picture of generation' are a row, but I need them to be a single column.  The "table of 2D transposes" obviously works only works for the 2D tables, so it will not help me.  Is there a way to turn these tables of 90 degrees so that all the data is in a single column instead of a single line?

  I've lost track of how many times I had to tell people to go the opposite direction, this is the first time that I had to think about this: do a right-click function Array build and uncheck the box 'Concatenate entries.  Then, you can use the function of transposition of scripture to the VI spreadsheet file.

  Edit: Confused by your comment when you say it must be a 2d with 4 columns table.

• As binary ASCII conversion... Transposed?

  Hello friends!

  I'm building a VI to divide a string and convert each binary code.   See the attached example.   When checking the input string against the Boolean output dashboard, I noticed that each 8-bit code is transposed from left to right when compared to any standard ASCII to binary table.   Am I understand that this binary is usually read from right to left?   My concern is how other systems will result this code after their transfer.   The main question is this: I leave it be, or transpose before data transfer?

  Any advice or comments would be greatly appreciated!

  Thank you

  Zach

  Do not forget that you look at a picture.  Index 0 of the array (which corresponds to bit 0 of the number) will be on the left.  As long as you do that common computing functions and few manipulations, don't you worry in this regard.

  If you do something where you want to graphically show on the front panel for a user what look like bits and have the 0th bit right, then you will have to manipulate the table so that the 0th bit will index 7 and bit 7 will be at index 0, and so on.

• Transpose the table 1 d for

  Hello

  It is a very simple question: I have a 1 d table appear as a column. I want it to be a row for reason 'cosmetic '.

  How to do this? (I looked and I couldn't find any simple answer that is installed my simple problem)

  Elliot

  You do not transpose a table 1 d. You can develop a control table 1 d or constant vertically or horizontally. Resize an element, and then resize horizontally.

• TRANSPOSE THE TABLE 1 D TO SEARCH AFTER

  Hello

  What I want to do is table 1 d of transposition (I in a column) to use after the 'Search in 1 table D' function, which works only if the table is linear. I have no change before the table 1 d of origin online. I have to transpose it from column to row. Any idea?

  Thank you

  Sorry,

  I thought I needed the data in a row, but the problem was the precision to find the value with 'Search 1 table D'

  There is not a problem, sorry more time.

  Thank you

• short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964

  Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)

• How to transpose a line date wise?

  Dear Experts,

  How to transpose a line date wise?

  date            value
  11-jan-2016 101
  11-jan-2016 102
  11-jan-2016 103
  12-jan-2016 104
  12-jan-2016 105
  12-jan-2016 106
  13-jan-2016 107
  13-jan-2016 108
  13-jan-2016 109
  

  --------------

  Expected results

  date            value     value_2 value_3
  11-jan-2016 101 104 107
  11-jan-2016 102 105 108
  11-jan-2016 103 106 109
  

  Thank you for your help in advance.

  Kind regards

  IVW

  Hello

  Whenever you have a problem, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) of all the tables involved, so that people who want to help you can recreate the problem and test their ideas.

  Also post the exact results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

  and: Re: 4. How can I convert rows to columns?

  Swivel (which is the generic name for what you want to do) assume that you can tell, by looking at each input line, you can specify what columns of output that the row will affect.  In this case, it seems that you need to derive a column like this, perhaps using the ROW_NUMBER analytic function.

• How to join two tables if you transpose the rows, columns and rows in one of the table

  Hi guys,.

  can someone help me please in the write request

  I have two tables

  Agents and Agent phones but in the agent phones table for the id of an agent it displays 4 rows because one of the column there types of different phones (office, mobile, home, fax)

  So instead of display 4 rows, I used max(case...) to convert rows to columns

  now how to reach it with another table

  Requirement:

  Database: 11.2.0.2.0

  create the table AGENT_PHONE

  (

  agent_id NUMBER (20) not null,

  agent_type_code VARCHAR2 (10) not null,

  agent_type_prefix VARCHAR2 (10) not null,

  Phone_Number VARCHAR2 (16) not null,

  phone_type_code VARCHAR2 (10) not null

  )

  CREATE TABLEAGENTS

  (

  agent_id NUMBER (20) not null,

  agent_type_code VARCHAR2 (10) not null,

  agent_type_prefix VARCHAR2 (10) not null,

  NAME VARCHAR2 (40) NOT NULL

  )

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '4805551436', 'CELL');

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '1111111111', 'PHONE');

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '2223334444',' OFF');

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '5556667788', 'FAX');

  INSERT INTO VALUES AGENTS

  (29709, ARE ', 'OFFICE', 'FLY');

  INSERT INTO VALUES AGENTS

  (1234, ARE ', 'OFFICE', 'MIKE');

  SELECT * FROM AGENT_PHONES

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  PHONE_NUMBER

  PHONE_TYPE_CODE

  ---------------------------------------------------------------------------------------------

  	29709			RE					OFFICE				4805551436		CELL
  	29709			RE					OFFICE				1111111111		PHONE
  	29709			RE					OFFICE				2223334444		OFF
  	29709			RE					OFFICE				5556667788		FAX

  SELECT * AGENTS

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  NAME

  29709

  RE

  OFFICE

  ROB

  1234

  RE

  OFFICE

  MIKE

  This is so the data we have in both table

  Now, I transposed rows to columns in the table of agent phones so I used the following query

  SELECT AP. AGENT_ID,. AGENT_TYPE_CODE,. AGENT_TYPE_PREFIX.

  MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'CELL' THEN AP. PHONE_NUMBER END) AS CELL.

  MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'OFF' THEN AP PHONE_NUMBER END) AS TURNED OFF.

  MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'FAX' THEN AP. PHONE_NUMBER END) LIKE FAX,.

  MAX (CASE WHEN PHONE_TYPE_CODE = 'PHONE'. THEN AP PHONE_NUMBER END) AS PHONE

  AGENT_PHONE AP

  WHERE AP. AGENT_ID = 29709

  GROUP OF AP. AGENT_ID, AP. AGENT_TYPE_CODE, AP. AGENT_TYPE_PREFIX.

  	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	OFF	FAX	PHONE
  1	29709	RE	OFFICE	4805551436	2223334444	5556667788	1111111111

  My question is how this to join the agents table so that my output should be like this...

  I want to display all the results in the table of the Agent, even if they are not in the table of agent phones. As you can see there are other agent id 1234 is also populated

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  NAME

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  CELL

  PHONE

  OFF

  FAX

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  	29709		RE					OFFICE					ROB			29709		RE					OFFICE				4805551436		1111111111		2223334444		5556667788
  	1234		RE					OFFICE					MIKE

  Currently, I run this query and I get the output as below

  SELECT *.

  AGENTS HAS

  LEFT OUTER JOIN AGENT_PHONE AP

  ON A.AGENT_ID = AP. AGENT_ID

  AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

  AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

  	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	NAME	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	PHONE_NUMBER	PHONE_TYPE_CODE
  1	29709	RE	OFFICE	ROB	29709	RE	OFFICE	4805551436	CELL
  2	29709	RE	OFFICE	ROB	29709	RE	OFFICE	1111111111	PHONE
  3	29709	RE	OFFICE	ROB	29709	RE	OFFICE	2223334444	OFF
  4	29709	RE	OFFICE	ROB	29709	RE	OFFICE	5556667788	FAX
  5	1234	RE	OFFICE	MIKE

  I want id 29709 agent in a line with 1234 agent also id to display

  You can rotate your phone number of agent in columns

  Select *.

  of AGENT_PHONE

  pivot)

  min (PHONE_NUMBER)

  for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

  )

  AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	PHONE	OFF	FAX
  29709	RE	OFFICE	4805551436	1111111111	2223334444	5556667788

  Then you can join to view inline or CTE

  with AGENT_PHONE_PIVOT like)

  Select *.

  of AGENT_PHONE

  pivot)

  min (PHONE_NUMBER)

  for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

  )

  )

  SELECT *.

  AGENTS HAS

  LEFT OUTER JOIN AGENT_PHONE_PIVOT AP

  ON A.AGENT_ID = AP. AGENT_ID

  AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

  AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

  AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	NAME	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	PHONE	OFF	FAX
  29709	RE	OFFICE	ROB	29709	RE	OFFICE	4805551436	1111111111	2223334444	5556667788
  1234	RE	OFFICE	MIKE	-	-	-	-	-	-	-

  Is that what you're looking for?

• Transpose the unique column values online

  Hi all

  How to transpose the values of one column in a row,

  COL

  1

  2

  3

  4

  5

  6

  7

  8

  and I want to convert this column into the line as follows:

  Line (each in a separate column value). Number of values is not constant.

  1,2,3,4,5,6,7,8

  Solution without converting them to XML:

  WITH row_values

  AS (SELECT DISTINCT property_name,

  column_order

  OF v_rd_property_definition

  WHERE lp_id = 5171

  ORDER BY column_order)

  SELECT Regexp_substr(Wm_concat(property_name), "[^,] +' 1, 1") AS col1,.

  Regexp_substr (Wm_concat(property_name), "[^,] +' 1, 2"). AS col2.

  Regexp_substr (Wm_concat(property_name), "[^,] +' 1, 3") AS col3.

  Regexp_substr (Wm_concat(property_name), "[^,] +' 1, 4") AS col4,.

  Regexp_substr (Wm_concat(property_name), "[^,] +' 1, 5") AS col5,.

  Regexp_substr (Wm_concat(property_name), "[^,] +' 1, 6") AS col6,.

  Regexp_substr (Wm_concat(property_name), "[^,] +' 1, 7") AS col7

  OF row_values;

• Transpose a single row of (definition, value) pairs in 2 columns

  I need to convert or turn a result monkey of a row in a table 2 (alias) manual column headers.

  Table

  ID	Description	Option1 Desc	value of option 1	Option 2 Desc	value of option 2	Option3 Desc	value of option3	Option4 Desc	Option4 value
  1	Seller - Lang - Menutype	Seller - Lang - Opt1	Value1	Seller - Lang - Opt2	Value2	Seller - Lang - Opt3	Value3	Seller - Lang - Opt4	Value4

  My current table has 8 options in total, but this should be enough.

  My select statement can make me what I want if poster horizontally that I missing just the knowledge necessary to transpose.

  Menu option	Value	Menu option	Value	Menu option	Value	Menu option	Value
  Seller - Lang - Opt1	Value1	Seller - Lang - Opt2	Value2	Seller - Lang - Opt3	Value3	Seller - Lang - Opt4	Value4

  I have to post this and I really need a query.

  Menu option	Value
  Seller - Lang - Opt1	Value1
  Seller - Lang - Opt2	Value2
  Seller - Lang - Opt3	Value3
  Seller - Lang - Opt4	Value4

  Hello

  It's called Unpivoting, and here's a way to do it:

  SELECT menu_option, value

  FROM table_x

  UNPIVOT (menu_option, value)

  COLLAR IN ((option1_desc, option1_value))

  (option2_desc, option2_value)

  (option3_desc, option3_value)

  (option4_desc, option4_value)

  )

  ;

  If you would care to CREATE States TABLE and INSERT post for your sample data, then I could test it.