Treo 650 Software, version 4.2

Similar Questions

• Is it really possible to move from a Treo 650 to a Treo 750?

  I'm not a very happy customer right now, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire and then to a Cingular Treo 650, combining three devices in one. I have since discovered that the Treo 650 seems to have a defective transmission mode, as I rarely can be clearly understood by whom it is I give the floor. Am at the second (or third, I've lost track) and continue to have the same problem. I get five bars of reception, but cannot be understood at the other end. A little problem when trying to call 911. I am constantly told I'm "breaking." The repair shop said that it "cannot reproduce the problem. OK, so I don't want to give up all the info I stored in the crazy thing, and the 750 seems to have a different system, so I thought I would try it. All the stuff I could find seem to indicate that it would not be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. The Setup program encounters an error and closes. Can not even look at the files, because the Installer tries to run at any time access to the Conference on disarmament. Of any player.  Given my girlfiend to check on his computer, and the CD seems to work very well. Other CD works fine on my computer. Must be some sort of conflict, but what? Tried calling AT & T number that suggested that they could help with the installation and was first connected to the business center, they me routed to the center of the laptop, which I routed to the center of the network, who said that they would have to bring in the Palm customer service and connected me to a Mac guy who poured me a menu that took me to someone for whom English is a second language with which I tried to communicate via a very poor satellite connection. They didn't make any sense anyway. by saying first that I couldn't have two desktops running (badly, that my girlfriend has my old Zire and the CD worked fine) and then insisting on the fact that the serial number of my camera had start with a P, when clearly there is no any alpha characters in there. Without this way of help. Managed to get the new ActiveSync installed from my friends on the network computer. Large. Now let's get my 650 sync with Outlook (which I've not used at home) and see if we can move. Nope. First of all, I have to update Outlook 2000, the old Win98 to my current XP. Find the old CD and puts away. OK, now synchronize with Outlook. Nope. The synchronization program gives an error, saying: it will only be able to be synchronized with Outlook 98, 2000 and XP (2002). Good grief. I have Outlook 2000, and the software does apparently not. If the Palm does not work, there is no reason for me to keep this phone and I'm very close to return and abandoning the Palm completely when I switch to something that works, even if I'm afraid to enter all this information.

  Thanks for the comments. Today, I installed Office 2007 Enterprise version I bought earlier, but had not yet installed. Microsoft has presented some difficulties, but they have been quickly resolved. I then downloaded the proper conduct of Palm and synchronized the 650 with the handheld crushing the computer. Then used Destop Active to synchronize the 750. Convinced that I had moved as much information as possible, I called AT & T and move the phone number to the new Treo.

  Bonus! When the guy at AT & T called me on the new phone to check it out, he said that it sounded better my phone fixed.

  Sorry for continuous paragraph. When it is late, I tend to write like I think.

  Dave

  Message is about: Treo 750 (AT & T)

• Data transfer to a XP Treo 600 to a Vista Treo 650

  Hi guys! Been scoured the forums for a few days now and have not found a solution to my problem. Many who come close... but not response complete. I used a Treo 600 years and loved it. My portable old and faithful finally gave up the ghost and I'm now done with a VIsta (32 bit) machine. Heres the prob... Vista will not recognize the Treo 600... I got a deal on a used Treo 650 (which recognises the Vista and Palm has the software for), BUT because Vista does not recognize the 600, I can not transfer my PIM data on the new office to get on the new phone.  Am I stuck with having to type the value of years of contacts and calendar information in the new office, someone out there has an idea for a solution? Thanks for your help!

  Hello Handskake and welcome on Palm forums.

  What version of Palm Desktop you have installed on your Vista PC?  You should be able to install Palm Desktop 4.1.4e under Vista, synchronize the Treo 600 to Palm Desktop and then upgrade to Palm Desktop 6.x if you wish.

  Alan G

  Message is about: Treo 755 p (Sprint)

• Bluetooth sync with Windows 7 for Treo 650

  When I hotsync the connection bar appears on both my Treo 650 and the PC; the two related 'successful synchronization.  But the information does not circulate between the two.  I tried a test Contact and test the calendar of events ranging from the Treo to the PC, then PC for Treo and neither work of direction despite the report 'successful synchronization.  What adjustments do I need to do a fix?

  Windows 7 Outlook

  Sprint Treo 650

  Sync Bluetooth

  What version of Palm Desktop?

  Have you checked to see if the info is in Palm Desktop and not Outlook?

  You can raise the 'soft' switch to change the direction to Outlook? :

  Start button / all programs/Palm/PIM led Sync / syncing with Outlook.

  Now try another HotSync and see if the data meet in Outlook.

  WyreNut

• Updated the Treo 650, Palm Centro, unable to synchronize all the data of the device

  Hello, I bought a new palm centro once my treo 650 took a bath.  I was able to load all my previous data on the new device with no problems, but I've been unable to hotsync since.  If I do a hard reset I can load it all on the property.  The only third party application that I use is datebook5.  I bought the program dbfixit and repaired all the blobs on my calendar entries, but I am still unable to sync anything (even memos, todos, address book, make a pocket computer > computer replacement).  I also deleted my palm desktop user name that I use a new fresh user profile and I still get the same error messages.  I also ran the palmhotsyncsetup.exe of Pimlico software.

  Here is the error message I get:

   HotSync session completed with errors on 16-09-08 11:06:36
  

  •  HotSync session began 16-09-08 11:06:36 and finished in 0.0 seconds
    
  •  Book synchronization Date cancelled
    
    • Duration: 0.0 seconds

    HotSync session completed with errors on 16/09/08 11:09:37
  

  •  HotSync session began 16-09-08 11:09:36 and completed in seconds 1.0
    
  •  Synchronization of AddressBook abandoned
    
    • Duration: 0.0 seconds

  Thank you all in advance for your help!

  Hi jacobkaucher,

  Welcome to the Palm Forums. A quick question for you. Do you use wireless sync to get your email on the phone?

  If you are, then this is your problem. If not, skip the rest of this post. Wireless Sync disables the Palm Desktop software. If you want to get your e-mail and synchronization, I advise to use VersaMail instead. If you really want to use Wireless Sync and still cradle sync, here are steps on how to re-enable the lines: http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=37678. This will allow you to start the synchronization again, but beware, you might start to get copies of your data.

  Message relates to: None

• HotSync my Treo 650 AT & T

  I have a treo 650 window XP, I was not able to sync since March of ' 08.  I just downloaded the latest version 6.2 and I plug in my usb cable to the PC and it does not at all recognize the palm 650.  I just bought the treo 750 and wanted to put all my info on my computer so that I could synchronize my 750.

  Hello and thank you for using the Palm Help Forums!

  Start with soft reset of the 650, and restart your computer. What operating system are you using on your computer?

  Message is about: Treo 800w (Sprint)

• Treo 650, not sync contacts with Outlook 2007 Vista machine

  Hi, I have a Treo 650 with happiness synchronization with my old XP Pro machine. When the computer crashed, I bought a Vista Home Premium 32-bit with Outlook 2007 on it. I installed Outlook 2007 duct after installing Palm Desktop 6.2. I'm not configured as an administrator for the security account. When I sync it no errors appear and sync is successful and all my photos on the phone and sd card and all prc files are backed up. But there is no contact in Outlook copied from my old phone. Outlook 2007, basically intercepts not anything from the phone. Even the Palm desktop does not save the phone numbers and addresses there synchronize photos from my phone. So, how can I get all my phone numbers and e-mail addresses in Outlook. Thanks for your ideas.

  Several things:

  1. the version of Palm Desktop 6.2.2 has integrated Outlook 2007 lines.  DO NOT install the update for Outlook 2007!   I've seen several threads lately where users have installed the update and things scrambled.

  2 palm Desktop to install properly if you have Admin rights!    It has always been recommended to grant temporary administrator rights when installing, perform a HotSync, then remove the rights.  I find it strange that you managed to get anything to transfer!

  3 did you say Palm Desktop to synchronize with Outlook?   Look here: Palm/programs/PIM Start Button / All Conduit Sync / syncing with Outlook.

  If #3 doesn't help, I everything again with a "clean uninstall" and start over.

  WyreNut

• USNG a Treo 650 can I switch bewteen outlook and Palm desktop and other issues

  I can't switch between Palm desktop version 6.2.2 and prospects to see what I like without losing any data?  If I can't spend using the Outlook on Ver 6.2.2 duct synchronize my Treo 650 in Outlook 2002. I may eventually go to a Blackberry tour and I would need to have the info in outlook to convert to worm Blackbery Desktop 4.7 (I think) the following problem is I have Palm Ver 4.1 on my Win XP Pro laptop in another country

  The treo with Outlook synchronization causes any changes to your handheld? I wonder if I'm having problems when I have to convert the Office Palm worm 4.x.x info on Xp desktop Blackberry 4.7 on my other computer?  I don't know if Palm ver 4.1.1 must be a conduit of outlook. I may have to upgrade to version 4.1.1E to accomplish this and I don't know if this version works on XP?

  The key is that I have to convert Palm desktop (2 different versions in outlook 2002 and synchronize properly)

  and hopefully maitain this info until I return to Europe and load it into my XP computer

  Thank you

  Bravo! Thank you!

  Palm Desktop 6.2 is compatible with XP... And you can synchronize the two programs at the same time without any problems. What you need to do is simply click on the sync led PIM to synchronize with outlook or Palm desktop.  Start > programs > Palm > sync led PIM >

• My Treo 650 flies will sync with my new Palm Centro?

  Hello

  I just bought a new Centro... I want to sync it with my old files created on my Palm software using my Treo 650.

  Can I hook up my new Centro, call it the same as my Treo 650 and synchronize and have all my data fill the right files on my Centro... for example, Contacts, calendar, etc.. ?

  Thank you

  Paul

  Get it transferred! Thank you very much for your help!

  pAUL

  Message relates to: Centro (AT & T)

• I have software version 9.3.1 on my iPhone 6 Plus.  As of today, none of my audio books in iBooks will play.  Please notify.

  I have software version 9.3.1 on my iPhone 6 Plus.  As of today, none of my audio books in iBooks will play.  Could someone please advise how this can be solved?

  What happens when you try to play (y yo get error messages?), and what did you see if that fixes it for example that you have:

  -tried to close the iBooks application via the taskbar of the phone

  -do a soft-reset/reboot the phone

  -deleted and synchronized their return from your computer's iTunes library (if you don't have them on your computer then file > devices > transfer purchases before deleting). Or you could, purchases on the iTunes store (and are still in the store and you have not reached the country since their purchase) be able to re-download them via the tab purchased in the iBooks app.

• How to upgrade to Version 10.8.5 my MacBook Pro software version 10.7.5

  How to upgrade to Version 10.8.5 my MacBook Pro software version 10.7.5

  The latest version of Mac OS is 10.11 'El Capitan' and the upgrade only currently available free. Any computer capable of running 10.8.5 will run 10.11. My son and I both have the same model of MacBook Pro you and executed both El Capitan without problem. I upgraded my RAM 8 GB but its still has the original 4 GB and shows again no problem.

  Any successful upgrade means that you must be free of any antivirus, internet security or so-called applications of "cleaning/optimization/tune-up. They will destroy the performance.

  If you MUST have 10.8 you must buy it on the Apple store online (not the Mac App Store application on your computer). The purchase to the store link is here:

  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion?FNODE=4ddb646a128d 220f3660a15e8b76a65478d23f0b7384d31a4b35...

  If you are not in the United States, please search in the Apple store online for your County using the "mountain lion".

• Satellite 300U-11V with Palm Treo 650 HotSync

  Hello

  I recently bought am and portable 300U unable to hotsync over Bluetooth with my Treo 650.
  I can transfer files between them with Bluetooth but I can't get them to Hotsync otherwise than by serial USB cable.
  I checked the 'How To' Toshiba which were for generic Tosh PC and PDA Palm T3 especially regarding the com port and transfer speed 7 but without result.

  When the hotsync/communication process starts the phone tells me to add my phone to the list of secure... devices then to check my settings!

  Thanks in advance.

  Frank

  > When the hotsync/communication process starts the phone tells me to add my phone to the list of secure... devices then to check my settings!

  Seems that there is some security restrictions. The Treo 650 is not known to me, but I recommend to check the ActivSync security options and add the Palm Treo 6 the list of secure devices.

• Bluetooth connection between Equium M70 and TREO 650 phone/PDA

  Hi all

  I have Toshiba Satellite M70-173 and come from TREO 650 phone/pda
  I want to hotsync my laptop and pda with bluetooth.
  How can I go? My laptop shows bluetooth stack, how can I activate bluetooth, what I have to buy the bluetooth adapter?

  Kindly help
  Concerning
  Maryline

  Palm based, isn't? If so, then check the HOWTO of the Toshiba Bluetooth site section:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists a HowTo called "HotSync over Bluetooth (TOSHIBA PC - Palm-PDA).
  It is perhaps useful to you.

• I can't download the latest I Tunes software (Version 10.7)

  I can't download the latest I Tunes software (Version 10.7) although I had no problems to download previous versions. I get all promts but although the download begins, he is arrested and the message ' I tunes has an invalid signature "Any ideas?

  The best way to do this is through the Community Forums of Apple.

  They know the right way to solve their own problems of software.

  Good luck with it there.

  See you soon.

• I could develop Java Application for Blackberry device software version 5.0 to 6.0 JDE

  Hi, expert,

  I saw this line of the ' BlackBerry Java Development Environment - 4.7.0 - fundamentals Guide'.

  It is said:

  ===============================

  With each major version of the BlackBerry Device Software and the FMV of BlackBerry, Research In Motion includes the
  corresponding Java API and version of the BlackBerry® Java® development environment. The version of the BlackBerry device
  Software determines the version of the BlackBerry® integrated development environment that you can use to develop
  applications. For example, RIM released BlackBerry Device Software version 4.0 and BlackBerry JDE version 4.0 in even
  time. BlackBerry JDE version 4.0 supports APIs that were introduced in BlackBerry Device Software version 4.0
  and BlackBerry JVM version 4.0.

  The applications that you create by using BlackBerry JDE Version 4.0 only work on BlackBerry devices
  running BlackBerry Device Software version 4.0 or later.

  =========================

  The last sentence talking about version 4.0 of JDE. I think that would mean that I could not develop a java application on JDE 6.0 for Blackberry 5.0 version of the software, even if I do not use any new API to 6.0. However, it seems to me that it is a useless limitation. Could someone throw some lights on it?

  I'm going to agree with superdirt here.

  I have the 5.0 OS update of applications work well on OS 5.0, 6.0 and 7.0 of the OS OS phones.  I try not to recompile for levels of the OS, if I can, and so far I've been perfectly safe with OS 5.0 running on the later levels of the operating system.  So you should be able to get away with just using OS 5.0.

  Not that it is important for you, but I just thought I documents some historical information about level changes.  .

  As far as I know it 2 change cod in the file format, one to the 4.0 OS and the other in OS 4.2.  Therefore, if you want to run anything in OS 6.0 or above, it must be compiled in OS 4.2 or higher.  Again, I have applications compiled to OS 4.2 running on OS 6.0, without no problem devices.

  There have been changes to the API - the result is that the code that works in OS xx does not work in OS yy where yy is after xx.  I hit a few of them and have so far managed to rework the code so that it works very well on both levels of the operating system.  In general it is things that I do wrong anyway, as the older operating systems (from memory) are not as strict on when the event Thread must be used.

  The problem with OS 4.7 compatibility is an impact and to get more of this, for devices touch screen only, I compile using OS 4.7.  If an application that uses only the functionality that was available in the OS 4.2, I compile on OS 4.2 for non touch screen phones and OS 4.7 for touchscreen phones.  And everything works fine.

  I hope this helps.