Trigger animate an Audio event with key Position

Similar Questions

• How to associate the audio file with progress bar

  Hi all

  I have a case in which I need to associate an audio file with a progress bar. What I want to do is to able to read an audio file that will say "Started process..." "Continuous on" process ends and it is and must be synchronized with the progress bar. Is it possible to do so.

  Please let me know

  Thank you

  Ankit G

  Are you referring to a LabVIEW horizontal/vertical progress bar that basically an integer U8 constantly wrote in it? Is it in a loop as it fills?

  If so, there is a full range that allows you to listen to the signals. As you write the number of your progress at the helm, you can keep control of what the number is (structure of the event or case), and when it hits special values, you play special sounds. Here's a screenshot of this palette.

  

• How to manage the structure of the event with two loops

  I have a question about the structure of the user event with 2 buttons?

  key 1: START LOGGING DATA

  key 2: STOP LOGGING DATA

  How do I control my

  structure of the event so that it will work? because now that the loop is save data... I can't stop the loop, when I clicked on buttons.

  

  

  

  super_saiyans wrote:

  the problem with moving it is that I don't have control of the DATA RECORD STARTING?

  Of course, you do.  When you get your press conference button, you say your state machine to move to the State of logging.  You must also make sure that you return to visit the State to wait for the event to check out the events of the stop button.

• Cannot transfer messages saved in the journal of the events with the 50 State

  I use Vista 64 on a HP laptop.   I don't have a Vista installation CD but have the cd hp the only way I can run CHKDSK with Windows running is to use the F8 key and select 'Repair your computer' then I get to the screen "System Recovery Options" and a "Command Prompt" option that I chose.  I can then enter "chkdsk" and it works, but after it runs I get an error "cannot transfer the recorded messages in the log of events with State 50 ' although he reported no problems with the disk.  It is this important error message and how do I get the chkdsk to write the information?

  I talked to HP and they tell me I have to reinstall the original software included with the computer to resolve this problem.

  Any help would be appreciated.
  Marshall

  Judd

  Thanks again for your information.  It seems that you agree with HP that the only way to solve this problem is to re - install the operating system.  This tells me that the re - install has a good chance to solve the problem.

  Best wishes
  Marshall

• 1244tx dv6 - Audio hail with Windows 7

  Hi guys,.

  I recently updated my dv6-1244tx for Windows 7 Home Premium (32 bit). Since doing so, audio quality has changed, now that intestine with no bass at all, as the audio goes through a high pass filter or something. This happens in all applications.

  I installed the latest audio drivers (or think windows are later anyway) and CODECS on the official hp, nothing helps. FWIW, mute key on the top panel is now definitely red/orange, when she used to change white to reactivate, red for silent...

  A brief google showed a few other users with similar problems, but without real solution fixed - so just wanted know if other hp owners have experienced it, or if anyone has any ideas on what I can try.

  Thank you [fingers crossed]

  R.

  Okay, as an update, I just tried to push back the IDT High Def Audio Codec for the driver installed previously, who had the same spindly (not low) audio quality.

  Then tried to put up-to-date that Codec to later, and now the media player does not play anything - a message error "Windows Media Player cannot play the file because there is a problem with the audio device".

  So, to see if Windows can generate NO noise at all, I'm going to: Control Panel > change system sounds, where I get a message saying something like "improvements can affect the performance of your device, you want to disable the improvements?", I click OK and problem is solved - Audio returns with the bass, pleasant and perfectly crisp and clear.

  It seems that some improvements may have been enabled in the driver / default settings of codec? I'm not sure of the original problem, but am glad it's fixed.

  I hope this post helps others who have similar problems! (if you can give a sense of my ramblings!)

  See you soon,.

  R.

• Feature line with key oracle.jbo.key is not found

  I've seen similar issues posted here but no go in enough detail to help me solve the problem I have just started using Oracle ADF a few hours ago.

  I have connected to our oracle successfully database and set up the display of an entity based on a base table which seems to have worked very well. When I run AppModule I see all the fields of the fine table, but when I change a content of columns to a valid value, and then click validation I get this error: "line entity with key oracle.jbo.key [all fields in table] is not found in the table" even though I don't know why, because it is without a doubt.

  The base table is a table of configuration when a new record is added manually a sequence is triggered to autopopulate the column id of the table. I read that this trigger could be the problem but I'm not sure why, as I'm only an update on an existing id, not create new ones?

  User, tell us your version of jdev, please!

  The framework must be a primary key defined on a table that you want to update. It will be weird if your doe not table a PK. define a pk in the table (if you cannot change the db, you can define the pk in the framework and try again.

  Timo

• You can add an audio event listener triggered?

  I display a button "stop" Audio "to stop the audio clips triggered on a slide. It is easy to make for itself when you click on hide, but I'd love to also hide whenever the audio ended.

  Anyone know how a way JavaScripty to add a listener to the sound object triggered? (I'll live if it is not possible.) Thnx!

  If you're 9 Captivate? There might be a possibility from the new ' delay next actions of... "command, but you'll have to check the length of each audio clip. The delay time, which will be this audio clip duration, can be put into a variable that makes it more flexible. This command is functional to the SWF and HTML output. ATTENTION: I love the CpExtra widget, it's a 'must have' for each CP-developer who wants to go beyond the basic features of Captivate.

  @Rod I thought that CpExtra to the end of the audio event works with audio attached to objects or slides, with audio triggered by a tip action? Has this been changed?

• Control a movieclip with the position of the mouse

  Hello everyone,

  I worked on a small project at work, I'm trying to controll a movieclip which consists of 60 still images of an aircraft (total 120 frames) that when played will show a view of 360 degrees of said aircraft. I can make it work with buttons, but ultimately I want to control the movieclip by moving the mouse. If anyone can help, that would be wonderful. Thanks in advance.

  Here is the code:

  import flash.events.MouseEvent;

  AC. Stop();

  stage.addEventListener (MouseEvent.MOUSE_MOVE, mouseMove);

  function mouseMove(event:MouseEvent):void
  {
  If (mouseX > 800 & & (mouseX < 1600))
  {
  ac.gotoAndStop (ac.currentFrame + 1);

  if(AC.currentFrame == 120)
  {
  ac.gotoAndStop (1);
  }
  }
  on the other
  {
  ac.gotoAndStop (ac.currentFrame - 1);
  
  if(AC.currentFrame == 1)
  {
  ac.gotoAndStop (120);
  }
  }
  }

  Using this code, the SWF file acts ok without error. I can do the movieclip play in any direction, however, when you move the mouse in the opposite direction that the movieclip continues to play forward or backward.

  Thank you

  Tommy

  There are at least two ways you can address this problem and they both require to control the position of the mouse more closely.  Now you have a general... If it's 800 > ahead and if his < 800="" step="" back,="" but="" when="" you="" step="" back="" from="" 1200="" to="" 1199="" you="" are="" still=""> 800, if you take one more step.  You need to either follow the change in mouse position or the position of the mouse to determine the framework of movieclip.  The second one is probably easier to design and will also be more accurate if the intention is to have a rotation for a displacement of the full scale of the mouse... otherwise you could just step back of a pixel at a time and in 120 pixels of movement... that might be what you want-the purpose is not explained in what you provided.

  (1) following the change of the position of the mouse - you must keep track of where the mouse was against where the mouse is when you check it... if(previousMouseX > currentMouseX)... you need to make the animation go back, etc...

  (2) with the position of the mouse to determine the frame movieclip - divide 120/1600... This is the number of images per pixel.  Take the current value of mouseX and multiply by that and make it an integer - go to this issue of image in the animation... simplifies this entire function similar to...

  function mouseMove(event:MouseEvent):void {}

  ac.gotoAndStop (int(mouseX*120/1600));

  }

  but refine to remember that there is no image 0

• Scroll effect - a key position

  Hello

  I'm placing an object, filled with red top (0px) 1000px square 100px.

  After the activation of the 'motion' in 'Scroll effects' tab I put the 'Initial movement' UP/DOWN 0. LEFT 1 "Position the keys ' 900px and"Movement end"to DOWN 0. LAW 1.

  If I understand well parameters in 'Initial Motion' will apply to the object to be 0px 999px and then setting "Final movement" shall apply from 1000px go.

  My problem is:

  Displaying the preview in the browser, either via an extract, the object appears 100px from the top and not at 1000px where I positioned.

  The only way to move the "key Position" to bring the object to 1000px to 0px, which means none of the parameters of "Initial movement" to take effect.

  Does anyone know why this is?

  
  

  The effect I'm trying to achieve is for the box to move to the left until the roll reached 1000px then to move to the right by the suite.

  Concerning

  Mike

  It works as the placed content will begin to scroll when the browser edge touch key position according to the parameters of the final query.

  Try to place the content on the page and then check out.

  Thank you

  Sanjit

• How to cut audio tracks with tool blade?

  Hello

  I recently made the switch from fcp7 to fcpx and I'm having a real hard time! There are many things that I can't understand how to do, and it's just one of them:

  Solo Cup audio tracks with the blade tool (or another medium, if there is). Can I cut the audio clips on one side, but how I cut a piece in the middle of the clip?

  Thank you!

  YYou can't cut with the blade tool? Or select it, and press Cmd - B of type point skimmer/reading

• Control the Structure of the event with text file

  I'm new relativaly in LabVIEW (experience only about 2 weeks). I am currently control a stepper motor using a structure of the event. Similar to the sample code given by LIFA, I entered my settings how the engine not move away, then press a button on the windows before, and it works this way. I also have other equipment that works as well in LabVIEW, as a transnational step; all components operate individually.

  Now, I'm trying to make the more automated system and to ensure that all the different equipment work in the same code. So, I tried to implement a structure of the event using a text as an input file to try to control events. The text file has a table 1 d of numbers going down vertically (only the line numbers change). So, I used a table of index function to take the numbers one by one, use a loop (while loop in this example) to go to the bottom of the column of numbers. However, the event not register the change, even if the indicator shows the value is changing.

  Attached, it's my test code and the text file that I use to try to control the structure of the event. Please let me know what I am doing wrong. Thank you.

  Oh, now I understand what you tried to say. I'm using a loop and a case structure to activate different events with the entries in the table. I thought case structures and event were the same, but you taught me the event structures are used just for the façade stuff. Thank you all!

• I own 2 TC4200 both with keys product without disks!

  I own 2 TC4200 both with keys product without disks!

  In fact, I have a full set of drives somewhere in my house, but I don't know where.

  Now what should I do?

  Jim

  Hello:

  If you live in the United States, you must call this number you have a notebook of class business.

  1-800-334-5144

  If HP has more discs for your model, you can always get a game from this provider on the link below.

  http://www.computersurgeons.com/p-18001-recovery-kit-380428-B25-for-hpcompaq-model-number-TC4200-tab...

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

• touch input with key Tip 2

  I need driver for touchsmart IQ512 to win 8 subscribe to the touch input with key Tip 2

  Required Touchdrivers for your system would be available via Windows update. You can even try to download the drivers from the following link:
  http://www.NextWindow.com/assets/files/NWFilter1.4.0.0.zip

• using male to 3 x female cable stereo Audio Splitter with audio output

  The HP Pavilion 22-h031ea all-in-one has an audio output on the back of the unit. Is this ok for this connect with a 6:1 with a male/3 female x audio cable with stereo Audio Splitter?

  Simmo56, welcome to the forum.

  I am not sure it will work.  However, it will not hurt anything to try it.  If this does not work, you will not be able to have 6.1 sound.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.