Trigger for launching application

Similar Questions

• Help design a trigger for an analog voltage signal

  Hello guys,.

  I have a real problem one design trigger for an application, what I do is to power a motor and measure consumption current and voltage during each operation. What I would do is to begin to acquire the signal once the voltage rises to a certain value and finish when it falls to a certain value. The equipment I use is a cDAQ 9178 with a NI9205 and 9221 modules.

  Any help / samples / detailed explanation will be really appreciated. I have no idea on how to work with the outbreak of the vi in Labview.

  Concerning

  SergeArmz

  Finally after a lot of research, tests and many developments, this is a VI that I developed and who is able to do what I was looking for. Thanks to the guys who helped me out to understand how solve my problem.

  For all those who may have the same problem I had, I enclose the VI.

  And of course if you can improve on what I did will be great, I think it's the purpose of this forum

  See you soon!

  SergeArmz

• Calendar in El Capitan can launch applications as scheduled events... No work around?

  After upgrading to El Capitan of Lion (10.7.5) - I jumped over the Mountain Lion, the Mavericks and the Yosemite - now I'm missing a very important feature in the new calendar (iCal formally): it cannot launch applications such as events scheduled at set intervals.

  I also absolutely do not remove the possibility that it is me who is a bad thing.

  In some other forums people suggest to uncheck calendars in iCloud settings and then create a local calendar (and name it for example "on my Mac") who should be able to launch applications and then synchronize the calendars in iCloud again.

  Unfortunately, as soon as I uncheck calendars in iCloud, the application calendar itself does not create new calendars at all - local or not.

  I'm doing something wrong? If not, is there perhaps a workaround?

  Any help will be greatly appreciated!

  Use Automator to create a calendar alarm clock that would launch the applications.

  When you open the automate, create a new Document.

  Choose the type of alarm calendar.

  Stretching the library of utilities in an action to launch the Application. Set this to the application you want to run.

  Save it and it will create a local calendar with an event in its operation this alarm clock calendar. You can then handle this event.

• Firewall settings universal for different application versions?

  Hello

  I am release different versions of my application often enough and because the version number is the part of the name of actual exe all versions trigger the Firewall dialog box when the version of give is executed the first time. It is quite annoying and confuses the operators.

  The names of files that I use are as:

  -myAppV1.0.0.exe

  -myAppV1.0.1.exe

  -myAppV1.2.1.exe

  etc etc.

  Is there a disable the firewall for each application that has a filename like "myAppV*.exe"? Or maybe another way to get rid of this popup? (Using the same file name for the different versions, or completely turning the firewall is not an option)

  Thank you!

  .. .and stop including the version number in the name of the executable file. The application builder will track the version numbers and same autoincrement for you, while signatures allow Windows to keep track of different versions of the same application.

  The way you are is inherently unreliable, errors and insecurity.

  Mike...

• Launch application on KeyPress sequence - Code example included

  I searched this forum and google hours and could not get it to work.

  I used this thread:

  http://supportforums.BlackBerry.com/T5/Java-development/launch-application-on-12345/m-p/502771

  I have a background process which is a PhoneListener.

  It intercepts the void callInitiated(int callid) and checks the sequence.

  If the sequence is the right one, she injects an end key and starts the application.

  There are 2 problems:

  (1) the dialed number appears with? prefix and I can't seem to find the right channel for the game.

  (2) if I inject end, the call ended, but so is my application that I just launched.

  I tried waiting and I tried the function calls but no dice the reorganization.

  public void callInitiated(int callid) {
  
          String dialedNumber = Phone.getCall(callid).getDisplayPhoneNumber();
          System.out.println("!!!!!!!!!!!!  Dialed:" + dialedNumber.length());
  
          if (true || dialedNumber.endsWith(KEY_SEQUENCE)) {
  
              // end the call
          //  EventInjector.KeyCodeEvent ev = new EventInjector.KeyCodeEvent(EventInjector.KeyCodeEvent.KEY_DOWN, ((char)Keypad.KEY_END), KeypadListener.STATUS_NOT_FROM_KEYPAD);
          //  EventInjector.invokeEvent(ev);
  
              final UiApplication app = UiApplication.getUiApplication();
              app.invokeLater(new Runnable() {
                  public void run() {
                      try {
                          Thread.sleep(20);
                      } catch (InterruptedException e) {
                          e.printStackTrace();
                      }
                      try {
                          ApplicationManager.getApplicationManager().launch(
                          "MyApp?gui");
                      } catch (ApplicationManagerException e) {
                          e.printStackTrace();
                      }
                  }
              });
  
          }
      }
  

  any help?

  Thank you

  He solved.

  for some reason, the callInitiated (.) is called several times for each call

  Make sure that your code to initiate and end the call is executed only once (I used a hashtable and stored the callid) and you're golden.

• Lack of Options > Advanced Options > Applications entry for the application of Simulator test

  I'm new to BlackBerry dev and I'm still doing my set up and tested development env.

  EPS consists of XP, Eclipse SDK 3.4.1 BlackBerry JDE plugin for Eclipse 1.0.0.67, BlackBerry component Pack 4.3.0.16 version 4.3.0 and the BlackBerry 8120 Simulator.

  I created a test application simple and loaded on the Simulator for testing through the cmd Eclipse Run > run as > Blackberry Simulator.  As expected, the application icon was displayed on the screen of the Applications (in the Simulator), and, when selected, the application has successfully launched and behaved normally.  So far so good.

  However, when I checked the Options > Advanced Options > Applications on the Simulator, I found that my request was not among others installed apps.  (I tried on two other simulators with the same results.)  I thought about reading the other posts on this forum that I would wait to see this information.   When I install on a simulator I would indeed expect display name information and the app version contained in Options > Advanced Options > Applications list?  If Yes, what should I do to make the information appear?

  Thank you.

  If you install your app in the Simulator simply by copying the COD file in directory of the Simulator (what is JDE when you run Debug), then you should not wait for the application to create. The modules in the files of the cod will be stil it well and that's all that generally the County. You can see the list of modules under Options-> Advanced Options-> Applications-> (Menu)-> Modules. Applications that are included in the Options-> advanced-> Applications are just constructions of metadata on top of modules to simplify various tasks, like setting permissions, adding and removing applications rather than tracking dependencies and individual modules.

  PS, You can programmatically create the entries in the application using the CodeModuleGroupManager and CodeModuleGroup if you really must have your request under Applications. Do not however forget that classic pose methods (Desktop Manager, Web OTA Download, BES OTA Push) all create them the entries in the appropriate application. So, you don't usually have to worry about this problem in the production environment.

• Partial triggers does not work for my application

  my code like this:

  ....

  < af:selectOneChoice id = "soc1.

  Binding = "#{createProjectBean.proCategory} '"

  valueChangeListener = "#{createProjectBean.selectChange} '"

  rendering = "true" required = "true".

  autoSubmit = "true" >

  < f: selectItems value = "#{bindings." CategoryId.items}"id ="si1"/ >

  < af:selectItem label = "selectItem 1" id = "si2" value = "11" / >

  < af:selectItem label = "selectItem 2" id = "si3" value = "22" / >

  < / af:selectOneChoice >

  < /p >

  .....

  < af:selectManyCheckbox id = "smc1.

  Binding = "#{createProjectBean.prodPref} '"

  valueChangeListener = "#{createProjectBean.valueChange} '"

  required = "true" rendered = "#{bindings.createProjectBean.showCheckbox} '"

  "label =" * select all products you want to compare:

  partialTriggers = "soc1" >

  < af:selectItem label = 'Oracle Fusion application' value = 'Oracle Fusion application' id = "si8" / >

  < af:selectItem label = value 'Application of the working day' = 'Application of the working day' id = "si10" / >

  < af:selectItem label = 'Mircosoft Dynamic' value = 'Mircosoft Dynamic' id = "si7" / >

  < af:selectItem label = "Peoplesoft" value = "Peoplesoft" id = "si9" / >

  < / af:selectManyCheckbox >

  < p >

  ........

  the partial bean code:

  {} public boolean selectChange (ValueChangeEvent valueChangeEvent)

  String selItem = (String) valueChangeEvent.getNewValue ();

  {if (selItem.Equals("22"))}

  setShowCheckbox (true);

  } else {}

  setShowCheckbox (false);

  }

  Return this.showCheckbox;        

  }

  ......

  However, it is not working.could someone can help me?

  Hello

  Try to use binding with the scope to be and use partial trigger programmatically.

  To refresh the pane programmatically:

  Bind the component at the bean. for example

  value = "outputText1" >

  The extent of the necessary use following the API inside the bean:

  AdfFacesContext.getCurrentInstance () .addPartialTarget (NameOfBindingAttribute);

  Also check the procedure below

  Activation of Page partial, rendering declaratively

  Triggers must inform the framework that a PPR request occurred. On control components, this is achieved by setting the attribute partialSubmit to true. This causes the component to order for a partial page request fire whenever it locks.

  The autoSubmit on an input element attribute and the attribute partialSubmit on a component of command are not the same thing. When partialSubmit is set to true, while the components that have their partialTriggers attribute values will be processed through the life cycle. The autoSubmit attribute is used by entry and choose the components to tell the framework to automatically a form submit whenever the value changes. However, when a form is submitted and the autoSubmit attribute is set to true, a valueChangeEvent event is called, and the life cycle runs only on the items marked as components of root for this event and their children.

  1 - Select the trigger (in other words, the component whose action causes the PPR)

  If the trigger is a control element, set the attribute to true partialSubmit

  If the trigger is an input or select element within a form and you are looking for the value that will be submitted, expand the section of behavior of the property inspector and the component set to true autoSubmit attribute.

  2. Select the target component that you want to return when a PPR-trigger event occurs. the trigger for the shuttle to the selected Panel, and then click OK.

  Ref: http://docs.oracle.com/cd/E16764_01/web.1111/b31973/af_ppr.htm

  Thank you

  Amey

• Apex 5 on PDB not work. works very well on the root - ERR-7620 could determine no workspace for the application (4500)

  Hi all

  I recently installed Oracle 12 c and Apex 5 on a new server.

  My apex 5 installation went well. I can access it without problem at the root on its default port 8080.

  Later, I created a new pdb file (cloned from pdborcl) and created a new schema.

  as sysdba, I started a new instance of the Apex on port 8888, but when I try to access it through the http://IPAddress:8888 / apex / or apex / http://IPAddress:8888 / apex_admin I get an error (see pictures below)

  Can someone tell me please in the right direction.

  Should I do an install fresh apex 5 on the PDB? I thought that if I installed as sysdba on the CBD, the pluggable DB would inherit apex 5. Help, please

  ERR-7620 could determine no workspace for the application (4500)

  ORA-01403: no data found

  
  

  (DOES NOT NOT ON PDB)

  

  
  

  (WORKING ON ROOT)

  
  

  
  

  
  

  Hi John,.

  What you said is exactly the problem you will encounter if patch 20618595 of the database is not applied before the APEX upgrade to 5.0. In addition to the opatch apply the approach, you also run $ORACLE_HOME/OPatch/datapatch? At run time, you guarantee that all-ins databases have been opened after the start of the database to the top by issuing alter database connectable to all open?

  Finally, you have indicated that you have installed it on a new server. Is your main interest just to have a new 12 c CBD with APEX 5.0 in it? If Yes, you can do the following to avoid the problem you are experiencing currently.

  (1) create a new 12 c CBD

  (2) connect SYS as SYSDBA to CBD$ ROOT and launch a 4.2.5 or newer version of apxremov_con.sql. If the database that you created in step 1 is 12.1.0.2, you can just use $ORACLE_HOME/apex/apxremov_con.sql

  (3) connect SYS as SYSDBA to CBD$ ROOT and run apexins.sql from the source 5.0 specifying positional parameters, as you normally would

  Kind regards

  Jason

• Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Muse does not open. Adobe AIR the required native extension is missing for this application...

  Muse does not open. "Adobe AIR the required native extension is missing for this application...". »

  Any ideas?

  Hi Curt,.

  Please try after the sequence of steps to make it work.

  1. uninstall any version of AIR on your computer using the Adobe AIR * remove Adobe AIR

  2 uninstall Muse to your machine using cleaning tool CC use the Adobe Creative Cloud cleaning tool to solve installation problems

  3 uninstall the applications Manager Adobe as well use the Adobe Creative Cloud cleaning tool to solve installation problems

  4. install AIR runtime 19.0 https://helpx.adobe.com/air/kb/archived-air-sdk-version.html

  5. install the applications Manager Adobe Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  5. once the MAO is installed then install muse and launch it.

  Kind regards

  Vivek

• Launch applications published in the workspace of the internet 2.0

  Hello

  I can't launch applications published in the workspace of the internet 2.0. When I open an application opens a client application to view my horizon and the error message "error: host name cannot be resolved"appears. "

  I have access to the workspace via the internet on a load balancer (ZEN). I configured both connectors. One for connecting internal Kerberos authentication with external authentication with password authentication. This works well. From the local network, it works like a charm.

  Do I have to give the Horizon view connection manager a public IP address?

  Another (or maybe THE) problem is on the balancer FQDN/SSL setting. The FULL domain name is the portal.domain.com. Load Balancing is done via the internet with the same accessible URL. When I select the option "Load Balancer" in the workspace Configurator, it copies the CA certificate root of LB all go, restart the Tomcat server and then the page throw me back to the original page where the button load balancer is not selected. I get no error message and in the newspapers, I see only errors. You guys have an idea what I am doing wrong?

  Kind regards

  Andreas

  Yes, the Horizon view connection server must be solved also (must be a public IP address for this)

• I recently installed Adobe Muse for Cloud applications. Whenever I have reset my computer, once I try to open the Muse I keep the receiver error 16. ¿Could yo help me with this?

  I recently installed Adobe Muse for Cloud applications. Whenever I have reset my computer, once I try to open the Muse I keep the receiver error 16. ¿Could yo help me with this?

  Hello

  I think you found the error at the launch of Muse. Please, try the steps in the link below.

  Configuration error. CC, CS

  If that don't fix the issue please share error screenshot and operating system of the information with us.

  Concerning

  Vivek

• Unity Mode - icons in the taskbar on the host do not work as expected for some applications

  In Unity mode, the icons in the taskbar on the host computer do not work as expected for some applications. The following problems may occur:

  1. several icons for a single application.

  2 aero Peek does not work if the application is reduced.

  3 icon moves to the end of the task bar after restoration of the collapsed state.

  These problems make it difficult to work in Unity mode. Here are some details about my setup:

  VMware Workstations Version: 7.0.1 build 227600

  Host: Windows 7 64-bit (all updates applied)

  Client: Windows XP (all updates applied)

  Steps on how to reproduce the issue n ° 1:

  1. start the mode of the unit for Windows XP clients.

  2. launch Visual Studio 2003 on the start menu of the unit.

  3. minimize and optimize Visual Studio 2003. Finally, you should see several icons, each with a different air look.

  When this happens, you can maximize is more than a simple click (as there are a stacked icons). Sometimes, only one of the icons to display Visual Studio 2003 (when testing this now, the other icon displays a portion of the Office of comments). If multiple copies of Visual Studio 2003 are launched, it is difficult to know who is who.

  Procedure reproduce problem 2:

  1. start the mode of the unit for Windows XP clients.

  2. launch Visual Studio 2003 on the start menu of the unit.

  3 minimize Visual Studio 2003.

  4. place the cursor on the icon. You should see the icon in Aero Peek (similar to the Aero Peek look when you use Microsoft Windows XP Mode).

  Aero Peek works great for other applications reduced, such as Windows Explorer.

  Steps on how to reproduce the issue n ° 3:

  1. start the mode of the unit for Windows XP clients.

  2. launch Visual Studio 2003 on the start menu of the unit.

  3. start Windows Explorer in the start menu of the unit.

  4 to minimize Visual Studio 2003.

  5 optimize Visual Studio 2003. The icon disappears briefly and then displayed in a different location (to the right of the icon in Windows Explorer).

  I guess that these issues will eventually with the similar Microsoft products such as SQL Server Management Studio, newer versions of Visual Studio, Microsoft Office (I guess just--I have not tried other programs).

  These questions, it is very difficult to use Visual Studio 2003 in Unity Mode, which is the main application, I need to use the virtual machine. I would love to see these issue fixed.

  Kind regards

  Tim

  Hi Tim, this behavior all boils down to the fact that when you reduce the VS, is not to minimize as windows normally do. VS hides the main window, and then returns to the window in the reduced state.  When the host sees the window becomes hidden, she removes the button from the taskbar to the window of the unit; There is no way of knowing that the window will be re-shown again later.  The thumbnail Aero does not work for the reduced window because the host never saw this window in its normal state, so that the host knows not what are the contents of the window.

  The good news is that you can work around the button behavior of taskbar in Workstation 7.1 by pinning the window VS. In this way, the taskbar button will always be there no matter how many times the window of the unit is shown/hidden. It will not solve the problem of thumb nail, however.

• Launching applications from partition Bootcamp without starting the virtual machine

  Hi all, installed Fusion because my colleague was furious about how you can launch applications without even opening the windows. But I was not able to do. I use a Bootcamp partition and is not, and I'm assuming that this is the reason why this feature is not available for me, but if someone could shed some light on this would be great!

  Thank you

  I think that your colleague is a bit confused. By definition, any product of virtualization to run a prompt to perform a request for comments. If you start in Unity mode, you might see Windows not running, but it's there. I suspect that what your colleague is talking about is the suspension in Unity mode. If you then start a Notes application, the virtual machine will resume, and since it is in Unity mode, it will appear to run the comments without Windows display application.

  Run a Boot Camp virtual machine means that you can not suspend (or snapshot, but that is irrelevant to this issue) because this can lead to corruption of the disk.

• Unicode mode for planning applications

  Is the mode 11.1.2.1 enabled Unicode for planning applications? If so how would you allow it?
  
  Seems that it is not allowed, but documentation is ambiguous, and a search on the forum gives no clear answer.

  From now a planning application name is limited to 8 characters, even in Unicode Mode, if you wish you can trigger a request for improvement with Oracle.

  See you soon... !!!