trigger to make a Ditto copy of records

Hello

I want a trigger when Cv.status = 2
This trigger will create a copy of the same the same record at the same tables except change cv.isEmpInserted = 2

The tables are:
create table Cv(
cv_id number(14) primary key,
cat_id number(14) constraint Cv_fk1 references CvCategories(cat_id),
source_id number(14) constraint Cv_fk references CvSource(Source_id),
emp_id number(14) constraint Cv_fk2 references employee(emp_id),
cvDate date,
isEmpInserted number(14),
keywords varchar2(2500),
status number(3),
pRegistration varchar2(3900),/**Professinal Registrations**/
additionalInfo varchar2(3900),
job_id number(14));


create table CvSpecialty(
cs_id number(14) primary key,
cv_id number(14) constraint CvSpecialty_fk references Cv(cv_id),
specialty_id number(14) constraint CvSpecialty_fk1 references specialty(specialty_id));

create table CvCertification(
cc_id number(14) primary key,
cv_id number(14) constraint CvCertification_fk references Cv(cv_id),
cert_id number(14) constraint CvCertification_fk1 references Certification(cert_id));

create table CvLicense(
cl_id number(14) primary key,
cv_id number(14) constraint CvLicense_fk references Cv(cv_id),
License_id number(14) constraint CvLicense_fk1 references License(License_id));

create table education(
edu_id number(14) primary key,
cv_id number(14) constraint education_fk references Cv(cv_id),
country_id number(14) constraint education_fk1 references countries(country_id),
startDate date, 
endDate date,  
institution varchar2(230),
subject varchar2(1400),
qTitle varchar2(110));

create table Experience(
exp_id number(14) primary key,
cv_id number(14) constraint Experience_fk references cv(cv_id),
country_id number(14) constraint Experience_fk1 references countries(country_id),
startDate date, 
endDate date,  
employer varchar2(500), /**name and address of employer**/
businessType varchar2(500), /** industry **/
jobTitle varchar2(180),
shortDesc varchar2(2500),
spEquipments varchar2(2500));

create table Skills(
s_id number(14) primary key,
cv_id number(14) constraint Skills_fk references Cv(cv_id),
personalSkills varchar2(3900),/**Acquired in life and career but not covered by formal certificates and diplomas**/
techSkills varchar2(3900), /**Technical skills & Competencies with computers, specific kinds of equipment, machinery, etc.**/
otherSkills varchar2(3900),/**Other skills & Competencies**/
drivingLicense varchar2(110))
/

create table Languages(
lang_id number(14) primary key,
cv_id number(14) constraint Languages_fk references Cv(cv_id),
languages number(14) constraint Languages_fk1 references CvLanguages(lang_id),
mLanguage varchar2(2));

create table LangProficiency(
p_id number(14) primary key,
lang_id number(14) constraint LangProficiency_fk references Languages(lang_id),
speak number(2),
read number(2),
write number(2));
Thank you in anticipation

The link I gave has example code, you can go through it.

Thank you
AJ

Tags: Database

Similar Questions

  • Is there a copy of record, as Power2Go program, on my new laptop computer Pavilion G6-1374EA?

    Is there a program to copy of record, as Power2Go, on my new laptop computer Pavilion G6-1374EA (product #ABU A9J86EA)? I searched all files and I don't see an obvious disk copy program. I would like to copy a CD to a blank CD or a DVD to a blank DVD. I should add that I am quite new to computers.

    Hello

    Click on the Start Menu, click all programs and make sure that if you have a folder called "CyberLink DVD Suite" - If you do, Power2Go should be part of this set.

    If you do not have the application above, download and install the free software ImgBurn.

    Guides on copying discs using this application are here.

    Kind regards

    DP - K

  • Attempt to delete pictures in my pictures and every time you send to trash, it makes a duplicate copy.

    Attempt to delete pictures in my pictures and every time you send to trash, it makes a duplicate copy.  How can I remove it without the computer by creating all these copies.  Pls help.  TKS.

    original title: remove duplicate photos

    Unwanted copies have file names with
    copy "prefix of"?

    Example: Copy of IMG_1455.JPG

    If_yes_maybe the following tutorial, I wrote
    for XP offers a few ideas:

    Here's how to reproduce the unwanted
    copy of...

    Hold down your CTRL key and select multiple files...

    Place your pointer over the selected group
    (holding the key ctrl) and left click / drag
    the group even just the slightest bit... now
    release the mouse button.

    Oooops... multiple copies...

    Maybe the following will help:

    Sometimes most of the person who
    trying to select multiple by holding the CTRL
    or the SHIFT key down while clicking on the left to select the
    image files.

    Copies are created when you are unable to
    completely release the mouse button before
    you move the pointer to another file. When a group
    the selected file is dragged... even the slightest
    release the mouse button will produce a bit...
    copies of all the files previously highlighted.

    It's a little easier if you have your folder
    Options set at single click... that way you can
    select/deselect a file with just a mouse more
    and you don't have to click. For multiples you
    I have to keep... CTRL or Shift.

    Do not click on... no slip... no copy... maybe that of
    your solution. To adjust the click...
    Open a folder and go... Tools / folder
    Options / General tab... Check... 'single click '.
    To open an item"/ apply / OK.

    If you want to delete all the files in a folder
    You can try the following:

    Reach... Edition / select all... or type... CTRL / has...

    With all of the files selected... go... Drop / delete...
    or press your delete key... or... click on the
    Group and choose 'delete '.

    How do I find and remove unwanted 'copies '.
    of your image files.

    Open the folder that the images are saved in and
    on the left, click on the button 'Search' in your toolbar.

    (If you view the files from a montage
    program and do not know where the record is... right
    Click on one of the image files and the menu...
    choose... Properties. The path to the folder will be
    in the tab 'General' to 'Place').

    In the research pane select... "All files and folders".

    In the "All or part of the file name" field. Come in...

    a copy of

    Now... on the left, click on the search"" button.

    When the search is complete... go to... Edition / select all...

    Then go to... Remove / delete.

    You will see a dialog box asking if you are sure
    you want to delete the files, click Yes.

    Now... on the left, click on the 'Back' button in your toolbar.

    Now the remaining files should be your originals.

    If you delete the wrong files... recover from
    your basket now.

    Also see the following article:

    Trouble fixing: stop Windows copy
    Files accidentally when Ctrl-click selecting
    http://www.howtogeek.com/HOWTO/Windows-Vista/fixing-annoyances-stop-Windows-from-copying-files-accidentally-when-CTRL-click-selecting/

  • Copy a record ang get its new primary key value

    Hello again everyone!

    I need to copy a record from a table at the same table. Here is the sample table and data:

    CREATE TABLE (PRODUCTS)
    ID INTEGER NOT NULL,
    DESCRIPTION VARCHAR2 (80).
    PRICE NUMERIC (9,2),.
    KEY ("ID") PRIMARY CONSTRAINT 'PK_PRODUCTS '.
    );

    INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 1', 8.5); -You will receive 1 trigger ID
    INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 2', 7.0); -You will receive 2 ID by trigger

    Now, I need to copy data from product 1 on a new line on the table.

    I would use the following SQL statement:

    INSERT INTO PRODUCTS (DESCRIPTION, PRICE)
    SELECT DESCRIPTION, the PRICE OF PRODUCTS WHERE ID = 1 - assuming that I want to copy 'Product 1'
    RETURN ID IN: NEW_ID

    But as far as I know, this is not supported by Oracle. Is there no workaround solution to solve the problem?

    I can't use procedures, functions, or something like that. Must be a SQL statement.

    Once again, thank you all for help.

    Best regards

    user9936895 wrote:
    INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 1', 8.5); -You will receive 1 trigger ID
    INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 2', 7.0); -You will receive 2 ID by trigger

    I really, really, really hope that your trigger uses a sequence to generate pk

    I can't use procedures, functions, or something like that. Must be a SQL statement.

    If your trigger uses a sequence to generate the pk, I hope that there is a clause which no values if the KP value is zero...

    If Yes, then you could just do:

    INSERT INTO PRODUCTS (ID, DESCRIPTION, PRICE)
SELECT id_sequence.nextval, DESCRIPTION, PRICE FROM PRODUCTS WHERE ID=1 --Assuming I want to copy "Product 1"

  • Make a local copy of repo OR Linux RT cRIO

    Hi all

    How can I make a local copy of the repo OR for a cRIO offline?

    My entire network are disconnected on the web, I would like to use something like RSync to create a local copy of the repo of NOR. Is this possible?

    Regards Marc

    I'll do a repo wget OR and add an alias in my dns server. As this download.ni.com show up on my local server. It will be transparent for the cRIO.

  • How to make a backup copy of Access 2007 in Windows XP?

    I bought a copy of Access 2007 through internet download and I need to make a backup copy.  I have Windows XP Home Edition with S/P 3 installed.  How can I make my backup?  Thank for your time and answers you, you may be able to give me.

    Kay

    Yes, it looks like this.

    its been a while for me that I dealt with iso files.

    However, I would try to just copy this file (like) on the CD.    then in the future, copy him on the hard drive to install msaccess, if necessary.

    but just in case, the foregoing does not (or if this is the case) can also use the methods described here:

    http://www.Petri.co.il/how_to_write_iso_files_to_cd.htm

    so, it would not hurt to keep a couple of disks for each method above.

    also, I learned that our House in discs last as long as commercial.  in order to have a number of CDs for the costly program is a good thing to have.   store one of them inside an old bood to keep out the light.

  • How to make a backup copy of my Sansa Fuze 2 GB

    Hello! Can someone tell me how to make a backup copy of my Sansa Fuze 2 GB. I'm going to replace because the wheel is not working properly and I ask (the agent on the Technical Support) on all my music that I have on my MP3 and they tell me to make a copy, but whenever I downloaded on Windows Media Player, I can listen to, but as soon as I disconnect my MP3, I can't play anymore. Can someone help me please, I don't want to lose all my music. Or as a matter of fact again downloaded (too many site to visit again)

    You can manually copy your music from the device to the computer using Windows Explorer, often referred to as 'My Computer' or just 'computer' in different versions of Windows by drag-and-drop, or open the Windows Media Player and "copy of the device" after clicking on the tab sync.

    It is also possible to copy works by using an application like Media Monkey too.

    Many people confused if the Sansa was initially loaded using never WiMP, many are realizing that the application works in both directions.

    Remember, it is important to always have a backup of your music!  It will save you grief!

    Bob

  • I use a dvd - r disc, but the movie maker says is not a recordable disc

    I use a dvd - r disc, but the movie maker says is not a recordable disc. also, when I try to publish the dvd is not the choice, her computer, a recordable cd or camer digital video...

    If you're running Vista Home Premium or Ultimate...
    the following article is perhaps worth the drive... If not...
    You'll need to publish (your Movie Maker save project)
    in the. WMV video format and the use of third-party software
    to burn your DVD.

    "Import files into Windows Movie Maker" "publish and burn a movie to a DVD.
    http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html
    Scroll down to: "2 to publish and burn a movie to a DVD")

    If you need DVD Authoring software... What follows
    freeware software can be worth a try:

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://www.dvdflick.NET/Download.php
    (the download is: "dvdflick_setup_1.3.0.7.exe")

    Save the file to your desktop or a folder on your
    hard drive and install from there.

    Be sure to read the Guide:
    http://www.dvdflick.NET/Guide.php

    Tutorials:

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    AVI to DVD with DVD Flick Guide
    http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

    To create a video DVD base that should play in a free
    permanent drive DVD... try the following...

    First... read the DVD Flick Guide to familiarize
    with the program.

    Open DVD Flick and insert a blank DVD in your drive.

    If the window of Autorun from your computer... just close it.

    Click the project settings button and check... Video /.
    Target format... residents United States... Choose... NTSC /.
    Accept.

    The title button left click Add and navigate to your
    Video clips and select the ones you want on the DVD.

    You can have by selecting one and then use
    the up and down buttons.

    Left click on the button create DVD / OK / Yes / Yes.

    Please wait while the DVD is created.

    When the text "Completed successfully" is displayed you
    DVD Flick can close. Now you can eject your DVD
    and play in your DVD player.

    At some point you might want to buy more
    Advanced Cyberlink, Nero, Roxio, software
    Ulead, etc... but at least it is a start.

    Good luck.

  • Make an electronic copy on a CD of a document (s)

    How to make an electronic copy of Word documents?

    How to make an electronic copy of Word documents?

    Please explain what you mean by "electronic copy?

    'Save ' a document on a CD? Is that what you mean?
    If so, then go to the folder where the document is > until it clicks > at the top, clickburn> CD/DVD tray open > insert a CD > close the drawer > just follow the instructions/guests then.

    If this isn't what you mean, please provide details.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Come make real una copia di windows 7 starter edition

    Come make real una copia di windows 7 starter edition?

    Hello

    You asked your question in the English version of the Microsoft Community. Please could you click on the globe icon to the world (change region) at the bottom left of the screen and then choose your preferred language. Now ask you question once again.

    If you can't find a suitable language, please go here:

    http://support.Microsoft.com/common/international.aspx

    for other international support options.

    Thank you.

  • How to make a backup copy of the emails from Inbox?

    How to make a backup copy (on a memory stick) of all e-mail messages in my Inbox?

    Hello. How to do an export of the new Webmail Outlook?

    Thank you!
    Jacqui.

  • How can I make a long audio / voice recording

    How can I make a long audio / voice recording? I want to record my life story that will be a long recording.

    How can I make a long audio / voice recording? I want to record my life story that will be a long recording.

    ====================================
    The following article might be worth a visit:

    Windows 7 - audio record with sound recorder
    http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  • whenever I have copy a windows 7 image makes an automatic copy. How can I stop this?

    whenever I have copy a windows 7 image makes an automatic copy. How can I stop this?

    This happens also with music

    whenever I have copy a windows 7 image makes an automatic copy. How can I stop this?

    This happens also with music

    I would say that a copy would be the first thing I want to stop doing,

    If you want to move a file, then move

    Make a right-click dragging you will offer choices.

    Left-click dragging does not.

    If you right click and select copy, Stop and use to cut,

    Or use Alt + E and move to the folder.

    http://www.bing.com/search?q=definition+of%2c+copy&form=MYMSNA&mkt=en-us&MyMSN-headersearch.x=221&MyMSN-headersearch.y=40

  • Can I make a physical copy of the elements of 14 photo shop?

    Yes,

    Hi all

    This is my first ever having to ask a question about the photo shop elements. I want to buy, download and install items 14. My question is. If I do I'll be able to make a physical copy of the software? The reason I ask is because in November last, I had a catastrophic computer crash and after another I could not reload my previous version I had but I contacted Adobe and a tech was kind enough to help me find the problem. So my question because I understand that when you buy and download that you can use it on two computers if necessary. I am grateful for all someone could give me advice. Just one more question. I couldn't just burn the exe file. file to download Adobe on a CD or a DVD?

    Greg

    gwest479 wrote:

    I couldn't just burn the exe file. file to download Adobe on a CD or a DVD?

    Greg

    Yes, you can download the installation files and save them on a hard drive or disk.

  • How to manually "make a second copy of:"?

    During the import, one has the possibility to make a second copy of: and designate a location for a second copy of the imported pictures. So far, I used this - set on an external drive - but the other day, it was not plugged in, and although I'm sure that the box to save a second/backup remained checked, I have not received any warning, that it was not any drive my import arrived at the main location only. So now I would like to add this import to the secondary location, but what it outside of Lightroom (which is generally not a good idea), don't know how.

    I think that you could select photos and export by using the original export option.

    I don't think there is a link between lightroom and the second copy, so I do not do the second copy with your OS would be no problem. Just do not move the originals.

Maybe you are looking for

  • No. 4 K resulution on youtube

    A few YouTube videos do not show the 4 k resolution option under firefox and only go up to 1080 p but on chrome, they show all the resolutions: sample video https://youtu.be/Wu-NrfB8Kd4 I also installed well flash

  • Cannot write on my Satellite C660D-1GH CD/DVD

    HelloI have CD/DVD burning problems on my Satellite C660D-1GH under Win 7 x 64. With the standard windows Explorer engraving - the process starts however, it is incredibly slow and after 2 hours of burning 1 MB of the file on disk 4 GB - it dispays o

  • Can't leave the dual mode

    Hello, first time here.  I'm lost and could use some help. I plugged my computer (Acer Aspire X) to my TV via the HDMI port.  I watched a movie, everything seemed to go well.  But now I am unable to get out of this mode.  When I select the Intel Grap

  • The camera is too slow

    The camera is very slow to take pictures. Sometimes the phone hangs in the meantime and farm applications. Anyone facing the same problem help me with this problem.

  • Configuration of memory for PE R510

    Hi, I have a PowerEdge R510 with eight 4 GB DIMMS. I want to add memory in the most cost-effective way possible, but do not understand what I can replace where and have a balanced configuration. Can someone help me with this issue?