Is there a copy of record, as Power2Go program, on my new laptop computer Pavilion G6-1374EA?

Similar Questions

• Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

  Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

  Also, I had to install the software twice on my computer before because I had to restart the computer. I don't know if this affects the limit.

  You are allowed to have two facilities activated, so it shouldn't be a problem with facilities to work on both machines.  If by chance you somehow tied up two activations for a machine you can have Adobe support help solve this cat thrue.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Winows advised that isn't a copy genuine windows. It's EPM preistalled I purchesed a new laptop computer

  About 4 years ago, I bought a new laptop and windows 7 has been installed and now a message is not a genuine copy of windows. CANY anyor help?

  Thank you

  TAM

  Hi Tam,

  Have you replaced any hardware, or reinstalled Windows 7?

  It is possible that the store of licenses of Windows 7 may be damaged or unreadable. Try the steps below to re-create the store.

  (1) open an Internet browser
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop sppsvc (it may ask you if you're sure, select Yes)
  Note: the Software Protection service may not be running, that's ok.
  (6) type:

  CD %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start sppsvc
  (10) type: slui.exe

  (11) after a few seconds of activating Windows dialog box will appear. You may need to reactivate and/or re - enter your product key or Activation can
  happen automatically.

  If you have a product key, you can re-enable Windows 7.

  1. click on the Start button
  2. type: slui.exe 3 and press the Enter key
  3. Enter the product key from the sticker on your computer
  4. click on the next button.
  5. you will be asked if want to enable, click ok

  You can also activate by phone as follows:

  1. click on the Start button
  2. type: slui.exe 4 and press the Enter key
  3 select your location from the menu drop-down and click on the next button
  4. the next screen provides the number to call to activate by phone

  How to contact a Microsoft Product Activation Center:

  http://support.Microsoft.com/default.aspx/KB/950929/en=us

• I need to download CS5 on my new laptop computer.  I have my serial number recorded, but I don't know which version I have on my desk.  Standard version?  Beyond that, I need help download and set up my licenses CS5 on my new laptop.

  Help please

  Hi janeth3327022,

  I see that you have Photoshop CS5 for windows, you already have the serial number, you can download it from here https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  However, on your new computer laptop, you should make sure that CS5 is compatible, you can see here https://helpx.adobe.com/photoshop/system-requirements.html#main_Older_Versions

  Let us know if this helped!

  Kind regards

  Aurélie hamadi

• Help!  My two XP machines are reimagees and I need to record Photoshop on the new laptop computer.

  I've been properly instaled Adobe Photoshop Elements 7 on my new to me laptop Win7.  My two previous computers were XP and due to the

  end of support for Windows XP, I have reformatted them to LInux.  I bought the laptop Win7 so I could use Photoshop via Windows as Linux using GIMP.  When I try to save my license, it says that I have to disable the other two machines.  It is no longer possible.  The rules say you can transfer serial number if your other computers were lost, damaged, or reimagees.  But the registration process does not show how to do this. It keeps telling me that I have to disable the other two PC.  Help.

  Go here:

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  Scroll down and you will see a place to start a chat session.

• Record the new laptop, no Confirmation email not sent? Help please!

  Hey all,.

  So, I got my new laptop computer and finally registered online to benefit from the guarantee. Everything went well and my account is performed and recorded.

  However, I've been waiting for about 2 hours now for an email confirmation just to keep in my files that all went well, (need the copy just in case for warranty purposes) but nothing has been sent!

  My Email is Correct, I checked the spam and trash folder and any confirmation e-mail from HP again!

  I really need this email to keep in my books, and I'm confused why it has not yet been sent. There may be a day or two?

  I do not know. Can someone enlighten me on this?

  Thank you

  Hi @megamega100,

  Welcome to the HP Forum!

  It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  First time here? Learn how to post and more

  Yes, this can take a few days of notification of update of guarantee.  As you can image you are not alone and they must update the system with the information and it could take a few days.  In the meantime, you can check to see if it has been updated on the HP Web site:

  Check the status of your warranty

  If the guarantee is not yet updated, give it a few days and check again.  Should it still not be updated, please contact HP support and that your warranty information available for them.

  Please contact HP to Contact HP Supportassistance.

  Please keep me updated on the progress.

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ","inch Up ' below!   If you need more assistance let me know and I will gladly do everything I can to help.

• Copy LR 2 DB to new laptop

  I want to copy my db LR2.4 and all the presets user to a new laptop computer. I met two problems after you have copied the db and loading:

  (1) the presets are apparently not in the comic book, because they are not appear. The "Lightroom settings" folder is empty on the desktop source file system (I searched all the discs to another folder with predefined files)

  (2) db shows all my files from a previousley imported from the desktop. However, they are on the K: drive on the desktop. I individually can tell LR to fnd the missing folder and point it at the C: drive of the laptop where I copied the image files. Is it possible to redirect all the files originally on K:... My photos on C:... Photos?

  the two systems are vista64

  My plan is to edit some files inLR while he is on vacation for three weeks and then copy the image files on modified desk and read the metadata of files in LR on desktop.

  Thank you

  pkphoto

  My plan is to edit some files inLR while he is on vacation for three weeks and then copy the image files on modified desk and read the metadata of files in LR on desktop.

  In this case, you need not worth copy catalogues, lack of redirect files et al. Just use the features of ready to use Lightroom which is designed only for this case. "Export as catalog" the images you want to edit on a trip. Select 'include the negative files' then export, then copy the whole folder exported (it contains catalog + images) to your laptop. When you are new, import the catalog to your desktop.

  The presets are apparently not in the comic book, because they are not appear. The "Lightroom settings" folder is empty on the desktop source file system (I searched all the discs to another folder with predefined files)

  Settings and presets are here. How is it that they miss? On Vista, you can find them here.

• Copy a record ang get its new primary key value

  Hello again everyone!
  
  I need to copy a record from a table at the same table. Here is the sample table and data:
  
  CREATE TABLE (PRODUCTS)
  ID INTEGER NOT NULL,
  DESCRIPTION VARCHAR2 (80).
  PRICE NUMERIC (9,2),.
  KEY ("ID") PRIMARY CONSTRAINT 'PK_PRODUCTS '.
  );
  
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 1', 8.5); -You will receive 1 trigger ID
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 2', 7.0); -You will receive 2 ID by trigger
  
  Now, I need to copy data from product 1 on a new line on the table.
  
  I would use the following SQL statement:
  
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE)
  SELECT DESCRIPTION, the PRICE OF PRODUCTS WHERE ID = 1 - assuming that I want to copy 'Product 1'
  RETURN ID IN: NEW_ID
  
  But as far as I know, this is not supported by Oracle. Is there no workaround solution to solve the problem?
  
  I can't use procedures, functions, or something like that. Must be a SQL statement.
  
  Once again, thank you all for help.
  
  Best regards

  user9936895 wrote:
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 1', 8.5); -You will receive 1 trigger ID
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 2', 7.0); -You will receive 2 ID by trigger

  I really, really, really hope that your trigger uses a sequence to generate pk

  I can't use procedures, functions, or something like that. Must be a SQL statement.

  If your trigger uses a sequence to generate the pk, I hope that there is a clause which no values if the KP value is zero...

  If Yes, then you could just do:

  INSERT INTO PRODUCTS (ID, DESCRIPTION, PRICE)
  SELECT id_sequence.nextval, DESCRIPTION, PRICE FROM PRODUCTS WHERE ID=1 --Assuming I want to copy "Product 1"
  

• Are there drivers for the recorder sony icd-bp150 for windows 7

  Are there drivers for the recorder sony icd-bp150 for windows 7? I can't recorder to work with the current drivers of dvr3. It works on XP machines but not my computer windows 7...

  Hello sconley3.

  I did some further research and found that, if the worm Software Digital Voice Editor 3.3 is compatible with Windows 7 OS, the recorder itself is not compatible with Windows 7 OS.

  However, you can try to transfer the files from the recorder to a computer with Windows 7 OS installed in it, using the stereo mini plug cable.
  Plug one end of the cable to the headphone jack of the recorder mini stereo jack.
  Plug the other end of the cable to the Microphone Jack on the computer.

  You can follow the link below to transfer files using mini cable plug.
  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&externalID=C1002444

  Kind regards
  ColbyP.

• Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

  Separated from this thread.

  Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

  Hello

  You cannot copy the drivers installed anyway.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  See you soon.

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit

• How to copy a record with a treatment of automatic line (DML)?

  Hello
  
  I want to duplicate (copy) a record.
  
  I have a form with an automatic line processing (DML), look for the PK stored in an element named P26_ID and filling of the values in the corresponding elements of the form.
  
  I have an automatic line processing (DML) that allow to update, delete and change the line.
  
  So far so good.
  
  I thought it would be good if I calculate a new value for the PK and stored in the P26_ID.
  
  Then I thought that the automatic treatment of the line (DML) would see that this is a new value for the PK and would "decide" insert a new record.
  
  But it does not work like that. I thought it was because the P26_ID element is of type database column; so I went to another element named P26_ID_NEW and put this new pk in this article. I then created another automatic processing line (DML), triggered by this button, and who will look at this new element. It doesn't work any more.
  
  Where can I go wrong?
  
  Thank you very much for your help!
  
  Christian

  Christian:

  Assuming that the 'Duplicate' function is available only when the page is in "Edit" mode, IE. a record has already been loaded in the form, you can do the following to duplicate this record

  (1) define a button named "duplicate".
  (2) set the goal for this button to be "URL".
  (3) set the URL for this button to be
  JavaScript:Duplicate();
  (4) add this piece of JS in the header of HTML page

  CITY

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• There is not enough disk space to save this theme in your computer

  I am UNABLE to record ANY theme in my computer for sharing! everytime I try I get the following error "there is not enough disk space to save this theme on your computer! but I have MORE than 50 GB free! even record on my drive hard 2 TB results in the SAME error! No MATTER how big or small the theme is, the result is that EVERY TIME the error! and google has NOTHING when I searched it!

  Hello

  It seems that you are unable to record the themes, you get the error: "there is not enough disk space to save this theme on your computer.

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: We will perform disk clean and check if the problem persists.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-in/Windows7/delete-files-using-disk-cleanup

  Method 2: Connect to the different user account and check if you can save the theme.

  If it works fine in another user account, then the current account may be corrupted.

  
  

  See this link to create a new user account and then copy files and settings old user profile to the new user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  If you have additional problems, please reply to this post and we will be happy to help you further.

• I copied the old file of passwords in the new profile, but do not see.

  Got a new laptop. Copied the content from the old profile to new profile. Most of the old information are there (bookmarks), but I do not see the passwords. I repeated copying the two files key3db and logins.json specifically, but even the passwords saved on my old profile are not there...

  Could you try again in a new profile and copy only the files logins.json and key3db?

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox