Trolling video streaming using view 4.5 Client with PCoIP

Similar Questions

• Poor video quality using windows 7 "play to" with DLNA Sony Bravia KDL-40EX700

  When I use the option "play to" in windows media player 12, everything works but the video streams on tv is of very poor quality!

  Most of the time the video is not yet play full screen. When I first set all and used television to find the video file, it played in the perfect resolution and quality, but now it does not matter if I have the video on the TV or choose play... two ways I get bad video quality.

  Are there settings for the streaming video quality in windows 7? I have the current firmware for tv update and tried on two different computers with the same bad results.

  What can I do to fix this?

  Mr. Goetz,

  There is nothing wrong with the drivers of your graphics card. The TV is one that makes the video file not the graphics card on your PC. The reason you have a bad video quality is the limited support of the multimedia formats that is supported by your TV. Generally, Sony's Bravia TVs have a limited set of media formats supported and for this reason, most of the time that the Play and Win7 will send transcoded versions of the video on television. Usually, the way Play works is the following:

  -Play questions the TV for supported media formats

  -If the TV supports the type of media you're trying to make, the Play sends native data flow to the TV. The quality will be provided by your video file.

  -If the TV does not support the native format, the Win7 also offers versions of the same video file transcoded: MPEG-2 and WMV for versions.

  -Play preffers to make reading possible at any time so he will choose a transcoded version if the native format is not supported. DLNA mandates support for MPEG NTSC or PAL MPEG formats, so this will be the common denominator.

  I tested several Sony's Bravia televisions in the last years of the development of Play, and several times reading transcoded. I guess that this is the case for you as well. Unfortunately, nothing you can do, unless Sony decides to support your media file nativelly. To make things worse, the qulity of the transcoded version depends very much on the quality of native files (win7 transcode in a lower resolution than the native.) It will be not high-end). If the native file is HD content, the resolution of transcoded stream will be pretty good for a TV 40 ". If the stream resolution is SD or smaller than (usually flows that can be downloaded on BitTorrent), resolution transcoded will be less than that. On a big TV screen, it will be stretched and the quality will be very poor. More the native file resolution and the resolution of the TV, the bad will be your experience.

  Therefore, could you please tell me what is your multimedia file type?

  Hope this helps

  Thank you very much

  CCazang@MSFT

• Using the Eloqua SOAP Client with cloud with php connectors

  Hi all! I'm trying to understand how to use the ExternalServiceWSDL in php and some difficulties. Most of the documentation is in c# and its very well do not convert. If someone could point me in the right direction that would be fantastic!

  Brian

  I thought it was a horrible way to ask for help, so here's what I'm trying.

  I'm trying to access the wsdl for external service via the EloquaSOAPClient.php and EloquaBObj.php files. Specifically, I'm trying to add the GetMemberCountInStepByStatus of WebHelp. To EloquaBObj.php, I've added the following:

  class GetMemberCountInStepByStatus

  {

  public $stepId;

  public $status;

  public function __construct ($stepId, $status)

  {

  $this-> stepId = $stepId;

  $this-> status = $status;

  }

  }

  class GetMemberCountInStepByStatusResponse

  {

  public $GetMemberCountInStepByStatusResult;

  public void __construct ($GetMemberCountInStepByStatusResult)

  {

  $this-> GetMemberCountInStepByStatusResult = $GetMemberCountInStepByStatusResult;

  }

  }

  class GetMemberCountInStepByStatusResult

  {

  public $memberCount;

  public void __construct ($memberCount)

  {

  $this-> memberCount = $memberCount;

  }

  }

  And the following to EloquaSOAPClient.php:

  in the classmap:

  'GetMemberCountInStepByStatus' = > 'GetMemberCountInStepByStatus ',.

  'GetMemberCountInStepByStatusResponse' = > 'GetMemberCountInStepByStatusResponse ',.

  'GetmemberCountInStepByStatuesResult' = > 'GetMemberCountInStepByStatusResult '.

  and this function:

  public void GetMemberCountInStepByStatus (GetMemberCountInStepByStatus $parameters) {}

  Return $this-> __soapCall ('GetMemberCountInStepByStatus', array ($parameters));

  }

  Here's how I'm attepmting to my access code:

  $param = new GetMemberCountInStepByStatus ($stepId, '1');

  $getMemberCountInStepByStatusResponse = $external-> GetMemberCountInStepByStatusResult ($param);

  $getMemberCountInStepByStatusResult = $getMemberCountInStepByStatusResponse-> GetMemberCountInStepByStatusResult;

  $memberCount = $getmemberCountInStepByStatusResult-> memberCount;

  And this is the error message I get:

  Fatal error: Eception SoapFault exception: [Client] function ("GetMemberCountInStepByStatusResult") is not a valid method for this service

  Here, any help would be appreciated

  Brian
  

  So I guess I went a little too far. I found the wsdl test (thank God) and was able to get something.

  First of all, I posted the settings found in WebHelp for the ListMembersInStepByStatus:

  $param = array ('stepId'-online $stepId, 'status'-'AwaitingAction', 'pageNumber'-online 1 online, 'pageSize'-online 10);

  Then call the function:

  $members = $external-> listMembersInStepByStatus ($param);

  Hooray!

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• video streaming does not play on windows media player 11

  The troubleshooting site suggests running the windows media player 10 instead of 11. Is it possible to to the lower grade media windows player? Is there a fix that will allow me to run video streams using the drive I have? It looks like my satalite TV when there is a big storm. Image is everything broken upward and very slow.

  In Windows XP, you can restore the version of the player that was previously on your computer.

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

  S.Sengupta Media Center MVP

• View latency with PCoIP

  I have a client view performer 5.0; and especially Samsung NC240 zero-clients against a pool of Win 7. Pretty basic stuff.

  Yet, they are major problems with a keyboard or display shift. I don't know who he is; but it is painfully obvious on PCoIP; and non-existent on RDP.

  Whenever they hit anything; especially in applications (not so much in pure text like Notepad or fields IE) about 50% of the letters 'hiccups '. Some letters appear instantly as they should, but there is a noticeable lag.

  I checked this behavior on zero clients and windows clients.

  Any ideas what this could be?

  Had the same problem, go to 5.0. The fix was to reinstall the Agent 4.6. Dragging around windows and it is now MUCH smoother. Must be a problem with the video driver from view 5.0 client or something?

• When I'm not able to use the video stream on the BBC website.

  At the same time, I was able to use the video stream on the BBC website. I am more able to do. However, I use the video streams on other news sites.

  If the videos are Flash videos, you have disabled an option in Flash preferences to not allow sites to store Flash cookies on your machine. Made BBC videos in Flash are expecting to be able to store cookies Flash, so videos can not work with this option off Flash.

  Go to Storage Global Flash Settings Panel which serves as Adobe/Macromedia site and check the box «Allow third-party Flash content...» ", where you can then manage the sites you have already visited. You will need to reload the page from the BBC after you change this setting.

• How to use the sony hdr-XR160 for a video stream live

  Im trying to use the Sony HDR-XR160 for a video live feed to the internet, but can't seem to find out if this is possible.

  The camcorder has HDMI and A / V output connections. Depending on your computer, you can connect the camcorder to a HDMI IN and A / V in port. Once connected, you can start streaming using the appropriate software. Please see the manual for more information on the available ports, you can use your computer operating.

  Please note that USB streaming is not supported by this unit.

  If my post answered your question, please mark it as "accept as a Solution.

• Webcam won't let me use special effects, said video streamimg can be H.264 or MJPEG. How do I change video streaming

  Webcam won't be me use of said special effects video streaming can be H.264 or MJPEG. How do I change video streaming

  What webcam do you use?
  What software do you use?

  See the respective manual to operate correctly.

• You must use view client for windows to access view server connection"

  When I go to my security on the outside, I get a message in 5.1, but 5.0 would simply run the installation of the client.  Is this new 5.1?  "You must use view client for windows to access the server view connection."

  Well Yes new feature. Is VMware view Client unbundling

  Take a look at

  http://www.VMware.com/files/PDF/view/VMware-view-evaluators-Guide.PDF

  from pg 87

  On page 88, he says

  Portal of the view on the login server see the landing Page

  The URL root view connection server is hosting a view portal or download customer portal, as the default value, the destination page. The page contains instructions to launch an existing customer of the view and a link to a download page to the VMware.com website that contains a client compatible with the detected operating system version.

  The portal of the view is more directly initiates a Client installation view, but instead allows the user to manually call the installation process.

• USE view connection Client 5.0 can stay Windows XP login screen?

  Daer ALL

  If I use the 5.0 Client mode.

  View connection server CAN then stay srcee to logon Windows XP.

  I mean want winxp connection to the domain.

  so I lgon twice.

  first display of connection server

  area of office reactivate winxp connection.

  can I do this?

  Thank you!!

  Hi fullwolf,.

  If I understand you correctly. you don't want to see Server connection automatically to connect to desktop computers.

  This is possible if you disable the SSO feature. Display agent adm template allows you to disable the SSO.

  «AllowSingleSignon determines if single sign - on (SSO) is used to connect users to view desktop computers.» When this setting is enabled, users are required to enter only their credentials when connecting with the customer to view. "When it is disabled, users need to authenticate again when the remote control '.

  To learn more, please read page 143 "VMware View Administration"

  Thank you

  Noble

• I'm aerial video shooting with a GoPro H3 to 1080 p 30 FPS and want to edit videos and give them to my clients to use media as much as possible for their advertising and marketing needs.  I would like to give them to the highest quality of all the

  I'm aerial video shooting with a GoPro H3 + 1080 p 30 FPS and wants to edit videos and give them to my clients to use media as much as possible for their advertising and marketing needs.  I would like to give them to the highest authorized quality.  What form does save it to "publish and share?  I have the first 12 items.

  KM

  Can we assume that your 1080 p 30 is an AVCHD.mp4 file or other?

  You manually or automatically, the project should define the project preset

  NTSC

  DIGITAL SLR

  1080 p

  DSLR 1080 30 p @29.97

  (If your rate is really 30 instead of 29.97, then go with 1080 p 30 instead of DLSR 1080 p 30 @29.97 DSLR)

  See the following link to set the preset manually project

  http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html

  For your exports

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 - H.264 1920 x 1080 p 30

  Please let us know if you have any other questions on this or you need any clarification on what written.

  Thank you.

  RTA

• HP t5740e with Puppy Linux - poor video streaming

  Hi all,

  I got my hands on a brand new t5740e in a trade and felt happy about it. Thought I would install a minimal Linux distribution and use the computer for stuff online on my Benq 24 '' LED screen. I removed W7 integrated and installed Puppy Linux, and while everything works great, video streaming is terrible. Very laggy, glitch, agitated.

  Tried several versions of Puppy Linux. Precise puppy seems to work better, but it is still far from perfect.

  -Flash player is installed, the latest version

  -Video driver Intel is in use

  -Installed FireFox, the latest version

  -For video playback (offline) regular, there is no problem whatsoever

  -When streaming, it works very well in the window, but much worse in mode full-screen. Audio is perfect no matter what happens.

  T5740e hardware specifications should be more than enough to run a minimal distribution like puppy perfectly! I installed it on computers with specifications well below and it works a lot better there, so my question is... What gives? What is happening and why? Can I do something to fix this?

  Marble42, welcome to the forum.

  I think that you will get more responses to your problem if you start a thread here.  The members who know the better your Thin Client.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Windows Media player or Windows Media Center can be used as a upnp client?

  Windows Media Player / Center to Winbdows 7 as a UPNP client?

  I'd really like to have this question answered for once and all. Can the Player Windows Media center to Win 7 be used as a upnp client? I want to use it to play movies on a HD support connected to my router. The router has a Media Server enabled on it which can broadcast video using upnp. I can find the folders on the hard drive and use them in my libraries in Windows Media Center, but if I'm not mistaken, that is not streaming and can be glitch. Please correct me if I'm wrong.
  Anyway can someone please carlify?
  Thanks in advance!

  I can't tell exactly what you want to do for sure. It looks like you want
  Windows Media Center to be able to read music and media of any computer your
  network. To do this in Media Center, you must add these other records
  places explicitly or in Media Center (using Windows Media
  Player/Libraries in Windows 7).
   
  Information that may help are to
  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/media-library/default.aspx
   
   
   
  On Saturday, November 20, 2010 15:52:25 + 0000, zaTricky wrote:
   
  > Windows Media Center is supposed to be a uPnP AV client is included in most more recent editions of Windows. WMC is also mentioned in the OP's original question. No, I don't know how to operate. I came across this forum because I am looking for the same answer, and I'm frustrated by answers here that clearly are not helping do me what I really want to do utterfly.
  >
  > What * I * want to do is to have a method of 1 minute for any laptop running Windows 7 that comes in my network have the ability to play media seamlessly without having to download and install additional software. Windows Media Center is supposed to do, but it does not work. Maybe the problem is on the side of uPnP server, however since I can't find all the options in WMC linked to this, I can't make that assumption immediately.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Video streaming in flash

  Hi all

  I'm a newbie to coding Flash. I tried to make a MPU announcement with a trailer hosted on another server, I managed to do that well, but no matter what I did, I couldn't get the size of the file less than 50 k, the any FLVplayback component was 58 k on its own.

  So, I then tried to import video using netStream AS3, I managed to do it, but the size of the video was filling the stage size.

  Basically, I want to import a video streaming on the half of the stage (the stage size is 300 x 250), play/pause, he and keep the exported SWF file less than 50 KB

  any suggestion would be great

  Thanks again

  "vid" is the reference to your instance of video.  Why try you "video" size?

  use:

  var nc:NetConnection = new NetConnection();

  NC. Connect (null);

  var ns:NetStream = new NetStream (nc);

  ns.addEventListener (AsyncErrorEvent.ASYNC_ERROR, asyncErrorHandler);

  NS. Play("RTS-Trailer.flv");

  NS.client = This;

  function asyncErrorHandler(event:AsyncErrorEvent):void

  {

  ignore the error

  }

  var vid:Video = new Video();

  vid.attachNetStream (ns);

  addChild (vid);

  pauseBtn.addEventListener (MouseEvent.CLICK, pauseHandler);

  playBtn.addEventListener (MouseEvent.CLICK, playHandler);

  togglePauseBtn.addEventListener (MouseEvent.CLICK, togglePauseHandler);

  function pauseHandler(event:MouseEvent):void

  {

  NS.pause ();

  }

  function playHandler(event:MouseEvent):void

  {

  NS. Resume();

  }

  function stopHandler(event:MouseEvent):void

  {

  Interrupt the flow and the return to the playback head movement

  the beginning of the stream.

  NS.pause ();

  NS. Seek (0);

  }

  function onMetaData(item:Object):void {}

  trace ("Metadata");

  Resize the video instance.

  VID. Width = item.width; // <- this="" won't="" resize="" to="" 1/2="" the="" stage. ="" use="" vid.width="stage.stageWidth/2" etc="" if="" that's="" what="" you="">
  

  VID. Height = item.height;

  Center video instance on stage.

  VID.x = (stage.stageWidth - vid.width) / 2;

  VID.y = (stage.stageHeight - vid.height) / 2;

  }

  function togglePauseHandler(event:MouseEvent):void

  //{

  ns.togglePause ();

  //}