Trouble installing EL Capitan. Drive uses the GUID partition scheme

Similar Questions

• Can not pass in the GUID partition scheme.

  I have a 2010 macbook pro under OS X Lion (10.7.5). I bought second hand and it came with a drive hard internal toshiba. When you try to update to El Captain, I received this notification.

  

  But when I tried to do, the options button is grayed out.

  (Macintosh HD doesn't have a partition tab.)

  

  Any help would be greatly appreciated.

  What happens if you clear?

  Boot into Recovery (R command)

• I installed El Capitan.  Now the e-mail program crashes.  Suggestions?

  I installed El Capitan.  Now the e-mail program crashes.  Suggestions?

  Try this:

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Download OS X El Capitan 10.11.3 Combo Update and reinstall.

• Designjet z2100 predefined paper sync to the driver using the HP utility is greyed out.

  Hi all

  I have a z2100 24 "on the latest firmware v9.0.0.5 (November 2012) and the latest drivers installed on Win7 64 bit OS. Last UTILITY.

  I downloaded a Preset paper HP (HP Everyday matte adhesive polypropylene) from the HP website and downloaded the document preset to the printer. The predefined paper displays on the front panel of the printer under custom paper types. If it worked.

  To synchronize the document for my permit profiles now, I need to use the HP utility, but PROFILES PAPER SYNC icon is grayed out. Therefore, the paper type is not available in my driver. That's my problem.

  Any ideas why I can't sync the downloaded document preset on the driver using the HP utility?

  Thank you very much

  Charl.

  This forum focuses on the level of consumer products.  For the Designjet you can have better results, post in the forum HP Designjet here.

• HP Pavilion p6290d: change to smaller capacity desktop hard drive using the recovery disks

  Currently my hard drive (750 GB) is having a problem. I have a spare hard drive (500 GB), I can replace the 750Go with the 500 GB hard drive using the recovery disks that I created when I got the pc?

  Hello:

  All I can say is that you have nothing to lose to give a try.

  500 GB could be sufficient to allow the recovery discs, you did to work.

• Used the recovery partition to get rid of a virus. Can I upgrade to windows 10 now or do I have to install all the updates first?

  Used the recovery partition (windows 7) to get rid of a virus. Can I update immediately for windows 10 or do I install all the updates of Windows 7 first of all?

  You can update immediately:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Check that Windows 7 is active.

• I had to reboot my system and then to install my ACC, I used the same product key (redemption code). However, the system says that the code has been used. Anyone can teach me how I can use the same installation code to download VAC. Thank you in advance

  I had to reboot my system and then to install my ACC, I used the same product key (redemption code). However, the system says that the code has been used. Anyone can teach me how I can use the same installation code to download VAC. Thank you in advance.

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• loading html document stored on the local hard drive using the 'flash' button

  Hello! I use adobe cs 5.5 flash (action script 3), and I need to load an html document into my hard drive using the 'flash' button I tried navigateToURL (thanks kglad). Here is the code:

  quizstart_btn.addEventListener (MouseEvent.CLICK, arithmeticlesson);

  function arithmeticlesson(event:MouseEvent):void

  {

  navigateToURL (new URLRequest("file:///C:/quiz/truequiz.html)", "_blank");

  }

  But I want to play my flash file to the other computer. In order to access the truequiz.html, I'll make a folder named quiz to C:\.

  How can I load this html file to other computers without creating a folder to C:\? Sorry for the dumb questions. I'm new coding. Thanks in advance!

  Is there another html file that includes the swf file?  If so, it is in a different folder, then you need to adjust the path so that the swf file target html file as if it were in the same folder as the html page that incorporates.

  Are other than that, you getting any kind of error message from security to try to link to the page in this way?

  I really enjoyed my visit here.  We went in February, the coldest time of the year, and when I got my mother-in-law apologized for the cold, it was then that I was just there dripping with sweat.  Where I am now (upper NY) it is-10 degrees...  If here and there, I'd be a temperature controlled indoor environment.

• Install CS5.5 and use the license for CS6.0?

  Hello

  I have a license for CS6.0, can I install CS5.5 and use the license for CS6.0?

  I don't want to install CS6.0 because all users have CS5.5

  If it s not possible, what is the alternative?

  RobbaN

  @Robban, just to make things clear, for CS6 serial key will not work with the installation of CS5.5, because both are two different applications. So, as Mylenium says, you won't be able to buy CS5.5 now as its not available for sale more.

• Need instructions on how to use the recovery Partition to restore my OS to its original state.

  I need to use the recovery partition to restore my OS to its original state.  I'm getting crashes (invaded by "dumprep.exe" CPU cycles) and an occasional BSOD.

  What brand is your computer?  Some computer manufacturers, including Dell and HP, have a recovery partition on the hard drive of the new computers.  By pressing a special key combination when the computer starts, you can use the recovery partition to restore the computer to the way it was when it was new.  Looking for a message about the recovery options on the first screen that appears.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• How can I read or use the unallocated Partition?

  My external hard drive has two partitions. We're "Healthy (primary partition)", the other is "unallocated".

  I can see health as a disc but not the unallocated partition. How can I read or use the unallocated Partition?

  When I right click on the partition menu popup are faded/not usable.

  You can create a partition in the unallocated in disk management space.

  Right-click on the unallocated space and create a partition.

  If you have a partition on the disk using all the space you need to set as GPT instead of MBR.  Windows will not accept a partition of about 2 GB max on a game of MBR disk.

• the installation program could not use the existing partition because it does not contain the required free space

  before I have install android 5.0 lollipop on mylaptop but I can't use wifi to connect then I use return windows 8.1 and I decided to install windows 8 because I have experience an error I couldn't manage on windows 8.1 .when I try to install windows 8 it shows me this error Setup could not use the existing partition because it does not contain the required free space... I google search for the solution but could not find so I install the windows partition 8 on my system reserved.

  Hi Lawren,

  Thank you for your update on the issue.

  In this case, you may need to format the entire disk, clean the partitions and reinstall new windows as suggested before. However, I suggest you to contact local support for the backup of your data from hard disk partitions.

  Please post back your results for assistance.

• Return to Windows 7 by using the recovery partition

  I installed Windows 8 on Windows 7 and want to go back to Windows 7 using the recovery partition.  Is it possible that I can do this?

  No it is not possible, unless you make the recovery disks that copy the recovery on an external partition. This partition is unnecessary after windows installation 8. Consider using windows 8 and 8.1 upgrade and always start on the desktop instead of the Start Page. It is very similar to windows 7 with a few improvements.

• applicationContext remains "null" after using the custom url scheme to launch the app

  Hello

  I am currently working on a DPS application for a customer who wishes to use its own authentication system.

  The client system is implemented so that they send the valid token to a URI with a custom method.

  By setting the same pattern custom in my app DPS constructor, I can get the app from the login window.

  What is described in the library of DPS & Api store 2.32 documentation, I understand that

  " adobeDPS.configurationService.applicationContext must contain several variables associated to how the viewer was started or enabled:" ","this class represents the context under which the application is launched '

  
  

  However, in my application when I try to see what contains the applicationContext, the object is always 'null '. It doesn't matter if I started the application by clicking on its icon or if it was launched using the custom uri scheme.

  
  

  Is this a bug or am I missing something here? I really need this token.
  

  Hello

  After being stuck for a while trying to work with the url of my client for usage, I finally tested it with a modified version and have found the cause of the problem.

  Work of first information provided by a colleague who was apparently not detailed enough for the customer asked me to use a url of the form App. scheme://auth/#token=...

  It turns out that this kind of url can start or bring the app to the front, but applicationContext remains empty.

  My tests using a url in the same form as you suggested (eg. app. scheme://v1/slot/library) can trigger the app or transmit data.

  The documentation available in the SDK library & shop and article on how to use a custom template is very vague on what formats link actually works, and how we can vary with it.

  A breakdown of official links to pieces, that the parties do and what items can be modified (for example ' / appstate') within the API documentation would be a great help for developers, I think.

  Kind regards

  Lorin

• Installation of El Capitan on new hard drive using the option createinstallmedia

  I'm not able to restore the operating system on a newly installed hard drive.  I replaced my hard drive on a Macbook Pro 2009 or 2010 version.  I created a recovery file on a USB for El Capitan using the createinstallmedia of the Terminal command.  The specific command was: sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/Untitled--applicationpath/Applications/Install\ OS\ El\ Capitan.app X\ X\

  start the computer holding down the Option button, but do not see anything that runs the options to select a disc of installation or installation of the OS.

  Hello!

  "Createinstallmedia" erases and writes on whole thumb drive. So, wipe your drive thumb whole and make sure that it is in a form "Mac OS extended (journaled) map of Partition GUID and named"Untitled"by default. No two partitions, won't work.  I highly recommend a 8 or 16 GB USB key that you can devote especially for this purpose. This is the Apple Support doc and a tutorial with the command copy / paste of the Mac world.

  Create an installer for OS X - Apple support bootable

  http://www.Macworld.com/article/2981585/operating-systems/how-to-make-a-bootable - os-x-10-11-el-capitan-installer-drive.h...

  Make sure that you are connected under your ID Apple with the app download install El Capitan. If you do not, your iCloud applications and data will be associated with the installer! Experience talking here.

  Excuse authors Mac worlds, please. Hope this helps out.

  Bravo!