Trouble when not specify the HTTP port

Similar Questions

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• VPN connection to access the content server on the HTTP port only

  Hello

  We have ASA5520, and we want to set up an IPSEC VPN profile so that one of our partners can access a server and only on the HTTP port.

  I tried to Configure tunneling split with an extended ACL, but probably I'm missing something. I just set up the ACL so that it included all source IP of our server on the HTTP port, but when testing, it did not work.

  However, if I configure a Standard ACL on the split tunneling I can access the server and all services it provides.

  Do you know if Miss me anything on the extended ACL configuration?

  Should I configure it any other way?

  Thanks in advance.

  Best regards

  Igor

  Hi Igor,.

  To do this, you must use a VPN filter.

  Please see this:

  PIX / ASA 7.x and later: example of filter (allowed specific Port or Protocol) Configuration L2L VPN and remote access

  * Split tunneling should be a Standard ACL.

  HTH.

  Portu.

  Be sure to note all the useful messages.

• WebServiceConnection.getJaxWSPort () - could not determine the wsdl ports

  Hey all,.

  I have an ADF application that communicates with a Web Service through a Web Service proxy. I have to configure the Web Service end point when running, so I followed the steps described in this blog: http://biemond.blogspot.com/2012/02/changing-your-adf-connections-in.html

  This works very well when building the Web Service proxy using the constructor that takes the WSDL URL and port as arguments:

  
  

  Context ctx is ADFContext.getCurrent () .getConnectionsContext ();.

  WebServiceConnection wsc = (WebServiceConnection) ctx.lookup ("SpiderPawsService");       

  SpiderPawsService spiderPawsService = new SpiderPawsService (wsc.getWsdlUrl (), wsc.getModel () .getName ());

  SpiderPawsPort spiderPawsPort = spiderPawsService. getPawsPart();

  However, an exception is thrown stating "could not determine the wsdl ports" when getting a handle on the Web Service proxy by doing this:

  SpiderPawsService spiderPawsService = wsc.getJaxWSPort (SpiderPawsService .class);

  Now, you might ask, why not just use the first approach? Well, the Web Service requires authentication and currently the username and password is read from a properties file encrypted and sent in the header of SOAP using a SOAPHandler. However, the power that the username and password are configurable as the end point. When you change Web Service endpoint in WebLogic Enterprise Manager, I noticed that you can supply a user name and password. However, I looked at the methods provided by the WebServiceConnection and I've not found a way to get a handle on the credentials. This means that I can't look at the information to pass to the Web Service. So, I thought that maybe by using the second approach, the container will create the Web Service proxy and could inject the credentials for me so that I can't provide them explicitly. Any thoughts or ideas?

  Environment:

  JDeveloper 11.1.1.6.0

  Oracle Enterprise Manager 11.1.1.6.0

  Thank you

  Bill

  I think you should use it like this: (you should get an object of Type Port, not the Service itself)

              Context ctx = ADFContext.getCurrent().getConnectionsContext();
              WebServiceConnection wsc =
                  (WebServiceConnection)ctx.lookup("SpiderPawsService");
              SpiderPawsPortType portType = wsc.getJaxWSPort(SpiderPawsPortType.class);
  

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• What is the meaning when it shows the HTTP errors

  What is the meaning when it shows the HTTP errors on my web page. Thks

  There are so many different HTTP errors as described in the following page that it is difficult to answer your question without the specific errors that you receive as well as other important information. Many HTTP errors indicate a problem on the server you are trying to connect to and you have no control over them, or a problem on your system. again, this depends on the specific error.

  List of HTTP status codes
   http://en.Wikipedia.org/wiki/List_of_HTTP_status_codes

  You can also consult the article below in order to provide enough information if you receive a better response and possible solution. It is useful to know the exact version of Windows Vista (including 32-bit or 64-bit) and service pack level, the brand and model of your computer, that's what you try to do the legwork, which program (browser and version) you are using and the results you receive, including any message (error) you can receive Word for Word.

  How to ask a question
   http://support.Microsoft.com/kb/555375

  Kind regards

• My keyboard is not recognized by windows when connected to the USB ports.

  My keyboard is not recognized by windows because that is malfuncioned or something else, that's what I get a message when I insert the keyboard to the usb port that could do because the ports are fine.

  Original title: keyboard problem

  Hi Caragata,

  Perform the steps from the link below and see if it works.

  Tips for solving problems of USB devices

  Note: This article also applies to Windows 7. If the fix it does not work, you can then run the built-in utility.

  Good day!

• Darkness of 8.4 (1) vpn L2L filter ASA when you specify the Protocol and port

  Hi all - I've spent many hours trying to diagnose this and have read several discussions and the Cisco docs unsuccessfully...

  Situation: two sites running Cisco ASA 5520 on 8.4 (1) with L2L IPsec on the public internet between each of them. The configuration of IPsec and associated routing works as it should and we are able to pass traffic between networks private behind each device as expected. The problem occurs when you try to block sessions using a vpn-filter group policy configuration.

  Each site has 3 private subnets that are able to communicate correctly without the vpn-filter configuration. We want to restrict access to specific protocols, hosts, and ports between each network.

  SITE A: 10.10.0.0/18, 10.10.64.0/18, 10.10.128.0/18

  SITE B: 10.20.0.0/18, 10.20.64.0/18, 10.20.128.0/18

  When we apply a filter-vpn configuration which restricted access only two guests, as follows...

  SITE A: vpn_acl_x_x_x_x list extended access permit ip host 10.20.0.1 host 10.10.0.1

  SITE b: the ip host 10.10.0.1 allowed extended access list vpn_acl_x_x_x_x host 10.20.0.1

  ... the configuration works correctly. However, when we try to lock the configuration more far and specify the protocols and ports, as follows...

  SITE A: vpn_acl_x_x_x_x list extended access permit tcp host 10.20.0.1 host 10.10.0.1 eq 22

  SITE b: vpn_acl_x_x_x_x to the list of access permit tcp host 10.10.0.1 host 10.20.0.1 eq 22

  ... and then try to establish a SSH connection between 10.10.0.1 and 10.20.0.1 or vice versa, the package is stopped on the side of the SOURCE. ..

  Mar 22 11:58:01 x.x.x.x 22 March 2011 14:34:56: % ASA-4-106103: vpn_acl_x_x_x_x of the access list refused tcp to the user "" inside-data/10.10.0.1(59112)-> outside-iptrans/10.20.0.1(22) hit - cnt 1 first success [0xd8d1c1b4, 0 x 0]

  I would really appreciate it if someone could shed some light on what is wrong with this Setup.

  SOLUTION
  

  The ACE must be implemented on the source and the end of the tunnel destination to facilitate this configuration.

  EXAMPLE 1: allow SSH two-way communication between hosts on each network (SITE A can connect to SITE B, SITE B can connect to SITE A)...

  SITE A:
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.20.0.1 host 10.10.0.1 eq 22
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.20.0.1 eq 22 host 10.10.0.1
  SITE B:
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.10.0.1 host 10.20.0.1 eq 22
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.10.0.1 eq 22 host 10.20.0.1
  

  EXAMPLE 2: allow communication one-way SSH between hosts on each network (SITE A can connect to SITE B, SITE B is unable to connect to SITE A)...

  SITE A:
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.20.0.1 eq 22 host 10.10.0.1
  SITE B:
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.10.0.1 host 10.20.0.1 eq 22
  

  Very good and thank you for this post. Please kindly marks the message as answered while others may learn from your post. I think that you have started a very good discussion on vpn-filter for tunnel L2L.

• Satellite A30: Can not find the COM ports when trying to query the modem

  Hello.
  I have satellite A30 and I reinstall windows xp at home, but I can't find any com port whenever I try to query the modem the display hardware confilct, but in Device Manager no sign of error/confilct, I did everything what I can.
  Add the port,
  Add more then 1 port
  disable the printer port
  change the printer port
  Reinstall derver modem,
  In short, I've done everything I can. its always show (! yellow) mark.if I add the port and if I remove the port and there is no sign of error.
  If someone help me to solve this problem a little,
  regared.
  MGK.

  Post edited by: mghouskhan

  The modem uses a virtual com port. It s not a real port.
  I wonder why it usually happens after the installation of the new operating system, you must install drivers Toshiba together in the right order
  Installing the chipset utility is important

  The modem driver should do the work and you n t need to activate com ports
  Please choose the right side of the page of the Toshiba driver modem driver after installing the OS correctly. I think that's the key

• Satellite M30X powers off the power when you touch the USB port

  Hello everyone, just registered and it is the first problem:
  As there is no general hardware forum, I post my problem here.

  I got it twice, my laptop
  (Product: Satellite M30X, Version: PSA72E - 008010GR) just went completely off.

  Motherboard:

  NorthBridge: Intel i855GME
  SouthBridge: (ICH4-M) of 82801DBM LPC Interface Bridge
  Motherboard model: Toshiba EAL20

  USB:

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI controller #1-3
  Version: 1.0
  Interface: UHCI
  Frequency: 48 MHz

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI controller
  Version: 2.0
  Interface: EHCI

  I have the latest Intel Chipset drivers installed and Windows XP Home SP3 with all updates.

  Once when I hit just the back USB ports with a USB plug, the other time when I unplugged my bluetooth key (climbing din't remove it).
  There was no blue screen or message of any kind, not even in the registry after you start the system again or this fatal system error box when you start after a system error.

  Just a total failure. But it works fine the rest of the time. I also tried to remake the script, but it didn't work.
  I have cleaned with a vacuum cleaner to remove dust and has taken a good look, but saw no difference to the side track.
  Maybe the clamps of the wand to shield a little more out to the contact pins on the rear.

  What bothers me a bit, it's some time ago, I had the laptop one computer my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.
  Still works well. Now for me, that I broke the USB port Insider somehing.
  I could not determine also the loose parts or unfirm at all.

  Y at - it there, diagnostic software that measures the motto of the port or power problems?
  I have a multimeter, fetch short-circuits with it?

  I saw a package of drivers Intel for USB 2.0 over there, but I can't find it on their page, advice?

  Thank you very much for your help, I just wanted to update my RAM and now I am not so shure if my laptop will last the next week.

  Fabian

  Hello

  I put t know any diagnostic software that could analyze this question, I think that a technician of the ASP may be able to provide exactly this question results

  > What bothers me a little is that some time ago, I had the laptop and my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.

  I think this might be the reason why the laptop stopped while you touch the USB port eventually ports were damaged by using the memory stick, this could cause the laptop off

  However, what we can do is to provide some suggestions and assumptions
  It you want to know why this is happening exactly, then you need to contact a technician laptop for a control.

• Could not get the HDMI port to work on the HP touchsmart.

  I have a HP Touchsmart 600-1265 with an HDMI port. I have connected the computer to the TV but can not get any audio/video to display. I don't know if you need to activate the port or what you need to do to make it work.

  When I push the A / V button above the HDMI port it shows the computer displays and below, it is then them a VGA and HDMI boxes but when I scroll down and select HDMI the screen just empties for a few seconds and then back on the computer screen.

  What should I do to make this work?

  Yes, the entry also. This is what the switch you mentioned.

  See you soon,.

• Can not read the serial port VISA without MAX

  Hello

  I'm trying to build an application that will interface with a Black Cat Systems GM-10 radiation detector.

  The app works fine on my computer (with the full development system OR) but when I install it on another computer, without LabView, the application cannot see the serial port!

  I checked that the driver is installed correctl and Windows can see the device, but when I run my program, he can't seem to access the serial ports.

  I then tried to install MAX on the second computer, how the application worked well, but as I install this app in other places, I don't really have the ability to install MAX everywhere (software must be autonomous).

  Any help would be appreciated!

  Z

  I would have joined the project file, but the forums seem to not want to allow me to download that big of a file.

  What version of LabVIEW are you using? With 8.x, the installer is very able to install the runtime of NI-VISA and MAX. If you are using an older version of LabVIEW, there is an option to include the series VISA support. Install just MAX will do nothing to make the available ports. This is the VISA that does this.

• HP Envy m7-n109dx: after loading Windows 7 on a new drive on a HP Envy m7-n109dx it will not recognize the usb ports

  not sure that this area is for.

  Hello:

  I'm not sure what you mean in regard to this area, but this place is to explain in more detail the nature of your question.

  I see that HP did not include the USB3 drivers on your laptop support page, so the most likely reason that do not have USB3 ports is because you need to install the driver for the USB3.

  Use the one directly from Intel.  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

• Do not specify the volume of traffic in SA, what happens?

  I have fI do not specify a lifetime of security-association in kilobytes, but set a seconds, what is happening? According to this link http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftsaidle.html , it says:

  A security association ends after the first of these lives is reached.

  What happens if I do not have a volume? I suppose that before they reached the default duration, he will negotiate HIS new and kick as the original timesout SA. I also assume that the end user would never know it resets. Advice please.

  Richard,

  We do not advise to use seconds because the exiry factor, after kilobytes will probably cause a short gap in shipping.

  With life expectancy of kilobyte disabled, we should wait for the life of seconds away from expiery and HIS new will be negotiated.

  "crypto ipsec security association life kilobytes disa.

  Indeed, we have by default for both.

  But we will always renogotiate based on one that is reached first.

  That answer your question?

  M.

• my system does not know the USB ports and the camera, win 7 x 64, asus k53z

  Thank you

  Hello

  1. are you not able to connect the device via the USB ports?

  2. What is the brand and model of the camera?

  Please provide us with more information on the issue, you face to help you.

  You can visit the link of the article of Microsoft that will guide you on how to ask questions below.

  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  You can run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/