Trouble with math font

Dear friends,

Please see the photo above.  I'm doing the physical work, but I get these bad characters.  On top, the formula is completely unreadable.  I think they are just meant to be brackers it.  At the bottom left is a simple example.  You can see where there tan - 1... etc.  Well 8/6 is just supposed to (8/6).  Please let me know how I can solve this problem.

As far as I know, the problem is with the media.  In the first example on the top, the "d" should be a left hook and the long 'i' must be a closing parenthesis.  There are the second set of values in the same problem from the top.  the long 'b' must be a left hook and the 'g' long must be a closing parenthesis.  On the background, must be "b8 / 6g '"(8/6) '. "  So I am g-d and BS where it should be left hook, and I make i and g's where there should be of right media.  What should I do?

Okay, that was pretty easy.  It is a text of Wiley and I searched through their support forum.  Apparently, they had this problem before.  In any case, the solution is to download and install 'MathType'.  By installing this program, it puts support necessary to use large fonts in the Wiley book of physics.

I don't know how to close this topic.  I'll mark the answer on my own post.  I hope that I don't cheat you out of all credit for the correct answer.

Tags: Acrobat

Similar Questions

  • trouble with the signature in my typekit

    My kit to type always im disconnected and when I try to sign says I can't sync all fonts that it says im signed in one second and then the screen will start to Flash and im out again how can I solve this

    I'm sorry that you trouble with that. Looks like there may be a conflict with one of the cookie settings in your browser. The Web of Typekit site uses cookies on Adobe.com and the connection will not work if you have blocked in the browser of third party cookies.

    If it is enabled in your browser, you will need to add exceptions to the privacy setting:

    http://help.Typekit.com/customer/portal/articles/760702

    If please give that a try and let me know if you still cannot sign in to your account.

  • How can I disable typekit - it used to and now will not shut and he is screwing with my fonts

    How can I disable typekit - it used to and now will not shut and he is screwing with my fonts

    Hey there,

    I'm sorry that you trouble with that. You can disable the synchronization of Typekit fonts option in the application of CC, under preferences > creative cloud > fonts (Typekit 'power'):

    I hope this helps; Let me know if you have any other questions, here or at [email protected]. Best,

    -liz

  • Problem with some fonts of symbols after the installation of the Sierra

    Hello

    I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

    All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

    In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

    I already tried the following:

    1. check the fonts in font book

    2 fix the duplicates in the font book

    3. using the "Restore Standard fonts" option in the font book

    4 deleting a file in the folder Preferences plist Fonts

    5 deleted the cache of police and the database

    I'm out of ideas. Has anyone else had the same problem found a fix?

    Kind regards

    Greville

    I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

    And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

    So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.

  • Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

    Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

    Have you tried turning off and back on again?

  • I can't locate the toolbar under the TOPIC when you enter an email, the one with the font size, color etc.

    Hello
    I was never able to locate the toolbar normally below the subject line when you type an email...
    It comes to the bar with the font size, color etc. At all the extras for letter writing, bold, underline, italics etc...
    Have always had it with previous systems, but never with Thunderbird... Sherlock


  • Trouble with Touch ID when you want to put one, it says that it does not recognize the finger

    Trouble with my ID touch, when I want to configure it says it cannot recognize my finger

    Apple Watch is not TouchID. Let us know what device you are using so that we can this post moved.

  • Hello! Pro iPad comes with a specific set of fonts in Keynote? Or is it possible ad fonts, for example with the font book?

    Hello! Pro iPad comes with a specific set of fonts in Keynote? Or is it possible ad fonts, for example with the font book?

    This is a list of the fonts installed in iOS 7, as far as I know, it has not changed for iOS 9.

    iOS 7: List fonts - Apple Support

    Fonts are embedded in the iOS, a few Apps will bring new fonts when loading the application. Keynote will use those that are pre-loaded with iOS. There are third-party fonts that can be installed, but you will need to check that they are working with the speech of the seller of these fonts.

  • Trouble with the Satellite Pro L300 Ethernet controller driver

    Hello

    I bought a Toshiba Satellite Pro L300 Model (PSLB9A - 064022)

    Put XP Pro/SP2-Having trouble with the Ethernet controller driver.

    I downloaded the driver from the appropriate list (Toshiba support) only network via another PC memory = car lappy

    Realtek_LAN_56861032008_XP.exe

    install
    installed in a folder named c:\ "DELL"-(WHICH can not be move?)
    drivers R86360
    OF this dossier, I do the "setup."

    broad com 440 x - installs as everything is good,
    made just TWO yellow controllers.in etha...
    \
    but isn't she suppose to be integrated realtek 10/100 Mbit / s Ethernet TX.

    Can someone please point me in the right direction.

    Thanks in advance...

    Steve

    Hello

    It seems that the Australian model, try this one:

    http://file.MyToshiba.com.au/file/Download/Resource/File/13002/Realtek_LAN_56861032008_XP.exe

  • Just set up a Win 2 K server 8 and trouble with FTP.

    FTP on windows 2008 server
     
    Just set up a Win 2K 8 Server and have trouble with FTP. FTP and IIS roles are installed and port 21 is open on the firewall but still can't connect. Any suggestion would be appreciated. Thank you

    Hello Spacekowboy

    If the suggestions of the Ing. Ladislav Cermak do not work then repost it please your question in the Windows Server forums from the link below. Thank you.

    http://social.technet.Microsoft.com/forums/en/winservergen/threads

  • Having a lot of trouble with updates.

    Having a lot of trouble with updates. Windows updates do not settle with error code 0 x 643. Fix from MS Computer Center said as he repaired software update. This does not resolve the issue. Fix MS datacenter failed with code 16977922-2147024894. Troubleshooting MS Wizard had had to close with an unexpected error code 0 x 80040154.  Norton updates fails with an error unexpected 0x000003E8. Update of Skype have also failed.

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

    Method 2:
    Try to perform the clean boot, and then check if it helps:
    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  • Anyone who has other trouble with redcross haqve anti-virus software?

    original title: redcross anti virus

    Anyone who has other trouble with redcross haqve anti-virus software?

    Hello

    Red Cross Antivirus is a fake antivirus, a scam to force you to pay for it while he has no advantage at all.

    Red Cross Antivirus remove (uninstall Guide)<-- read="" this="">
    http://www.bleepingcomputer.com/virus-removal/remove-red-cross-antivirus

    It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
    the Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
    Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
    the anti-virus software, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    Original version
    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Trouble with conversion email from POP to IMAP Comcast: Code: 800ccc0f

    Original title: POP IMAP conversion

    Trouble with conversion email from POP to IMAP Comcast:

    Code: 800ccc0f
    Your server suddenly put an end to the connection. Your IMAP command could not be sent to the server, due to non-network errors.

    I'm on Windows 7 Home edition, Service Pack 1.

    Using e-mail with Comcast Email Client programs
    http://customer.Comcast.com/help-and-support/Internet/email-client-programs-with-Xfinity-email/

    Instructions for:

    Outlook Express
    Outlook 2003
    Outlook 2007
    Outlook 2010
    Windows Mail or Windows Live Mail
    Windows 8
    Mozilla Thunderbird
    Mail for Mac
    Eudora

  • How to display very large text with the font size?

    I'm using html and css to display large text with the font size.

    Label {
    text: "Acit"
}

    In the image below, it is the largest size, although I try to increase the value of the size of the font. Do you know how to display the largest font size?

    Thanhks

    You should be able to amplify it upward with scaleX/scaleY properties, although no doubt quality will suffer somewhat (but probably not significantly, for most people).

  • I had trouble with my windows 7 Home premium, I downloaded again and ended up with 2 windows 7 hard disk, how can I delete one?

    I had trouble with my windows 7 Home premium, so I downloaded it again, now when I connect it has windows7 and windows Home premium, but the family version premium won't load, how to remove this version of my hard drive?

    Click Start, type: msconfig

    Press enter on your keyboard

    Go to the Startup tab

    Select the entry you want to delete

    Click on delete

    Then set the time to '0'

    Then click on apply and OK

    Restart if prompted.

    ------------------------------------------

    If the problem persists, try the following

    Click Start, right click on computer

    Click on properties

    Under control panel home

    Click on "advanced system settings".

    Go to the Advanced tab

    Under Startup and recovery, click settings

    In the default operating system list, select Windows 7

    Uncheck the "time to display list of operating systems".

    Click OK

    Then apply and OK

    ---------------

    If it still does not respond, try the following:

    EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager.

    http://NeoSmart.NET/DL.php?id=1

Maybe you are looking for