Troubleshooting problems of vodafone UK network.

Similar Questions

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• Problems with vista wireless network connection.

  Whenever I try to access the internet via unsecured wireless network I have to reset the modem/router.  Only happens with Vista and does occur only on that network.  No problem on other networks (public) wireless and no problem at home with 3 other computers on this router wireless and internet.

  Hi Skip,

  A. when it last work very well?

  B. has been any changes made to your computer recently?

  C. don't you check the network connection?

  D. is in monitor mode wireless network card?

  Try the methods below.

  Method 1

  The tool the Network Diagnostics which is part of Windows Vista is designed to test the network connection to find errors. The Network Diagnostics tool can also be used to determine if the network-related programs are working correctly. To use this tool to resolve network connectivity problems, follow these steps:

  1. Open Internet Explorer and try to access the Web page that causes network connectivity problems.
  2. On the page that displays an Internet Explorer error message, click diagnose connection problems .

  The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  • He was unable to find a problem.
  • It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Method 2

  Open the link below and click the Fixit who can fix most of the issues related to internet explore.

  http://support.Microsoft.com/kb/936211

  Method 3

  Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Hope this has been helpful.

  Thank you
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem connecting Wi - Fi networks unsecured with Windows 8

  Hi all!

  I have problems connecting to unsecure networks that require more authentication via browser thr, as networks of the hotel or Starbucks.
  The networks work wirh all other devices I have, but on my laptop with Windows 8, it doesn't.
  I get a "limited" connectivity and I can't sign on the browser page.
  Why is it so? How can I fix?
  Thank you!

  Hi Emme,

  The issue is limited to any particular Web site?

  This problem can occur because of network settings.

  Try the following and see if it helps.

  Method 1:

  I suggest you to run this utility from the following troubleshooting and check if it helps.

  Network troubleshooting:

  Open the network troubleshooter utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), saving troubleshooting network in the search box, touching or clicking on settings, and then type or identify and fix network problems.

  Resolution of the problems of Internet connections:

  Open the troubleshooter of Internet connections by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click Internet connections.

  Troubleshooting network adapter:

  Open the network adapter troubleshooting utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click on the network map.

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. press "Windows + R" key on the keyboard to open the run window.

  b. type ncpa.cpl, and then press ENTER.

  c. right click on your wireless network connection, then click Properties.

  d. click the wireless networks tab.

  e. under preferred networks, click your wireless network, and then click Properties.

  f. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Refer to the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  Notes:

  Reset the settings of Internet Explorer feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope that the information provided is useful.

• There was a problem connecting to the network

  It identifies the network properly even when I put the password - and that is the password - the comment poster 'there was a problem connecting to the network.  The WiFi network, you are trying to reach cannot be found. "Yet he already told me that the network is correct.  Frustrated!

  Is the network that you connect to your personal or public?  On my home network, I turned on an access control and when you are trying to connect with an unauthorized device, we get similar behavior.  It does not connect despite all the correct information.

• Windows cannot load the locally stored profile. Possible causes of this error include insufficient __security rights or a damaged local profile. If the problem persists, contact your network administrator. __

  Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If the problem persists, contact your network administrator.
  My documents are 'hidden' also

  xpconfused,
  This article explains how to solve problems with a corrupted profile. Article  After return your results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• With my HP Pavilion Elite m9250f desktop PC, I have problems to get the network and the other driver.

  With my HP Pavilion Elite m9259f desktop computer, purchased in 2008, I have problems to receive a network and other drivers. In addition, I can't find my recovery disks.

  Any help would be much appreciated.

  Rebecca O

  Hello:

  If you post them details of the device string ID for each device in the Details tab in XP, I can send you the link for the drivers.

  For now, I can send pilots based on the material in the manual, and if your PC has different hardware, so I could waste your time and mine.

  Always install the first chipset driver:

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20019&ProdId=2842&lang=eng&OSVersion=Windows%20XP * & DownloadType=.

  This should be your integrated graphics driver:

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18774&lang=eng&OSVersion=Windows%20XP%20Professional * & DownloadType=.

  Audio: Accept the agreement. Download and install the 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Network: Download and install the 6th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  If none of them do not work, please post the hardware ID so I can help you further.

  Paul

• Error message: a problem with your wireless network card

  Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

  Your wireless card has stopped working properly.

  There is a network adapter that allows your computer to connect to a wireless network.

  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Home network problem: 0 x 80070035: network path not found.

  I have problems with my home network; my laptop is unable to access the files on my HTPC

  More precisely:

  Laptops and PCs are running Windows 7 Ultimate. My laptop is connected to the home wireless network, the PC is connected through the LAN. Router is a Netgear DG834GV. Both computers have fixed IP addresses. They are part of the standard workgroup workgroup. There was formerly a group residential, put in place, which worked very well. We also have a Vista laptop that does all the unusual problems. Until a few days ago, the whole Setup worked perfectly. I could previously access/copy/distribute multimedia content, play on the PC via Zune music on my laptop and print from my laptop to the computer, but now I am unable to do one of these. The other laptop still works fine.
  From the network on the PC screen, I can see the files from the laptop and access.

  However, since the network on the computer screen laptop, I see the PC, but when I try to open it I get the error "Windows could not access \\MEDIACENTER. 0 x 80070035 the network path was not found. "I ping the PC with the IP address and name, and I can even remote to the computer desktop.

  ipconfig on the laptop did something funny...

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 139:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 143:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 140:

  ... up to 200. I can't that assume it goes back to #1 as well.

  After a few suggestions on here I just went through the enable netbios over TCP/IP, but now I can't see even the PC! Still can ping and access internet tho.

  Any suggestions as to what may be the cause?

  Here is the solution for "error code 0 x 80070035 network path not found" on Windows Vista and Windows 7 computers. Click on the button 'START', select 'CONTROL PANEL' and go to 'DEVICE MANAGER'. Click on "NETWORK CARDS", then click on 'VIEW' and select 'SHOW HIDDEN DEVICES'. In the expanded view, you will see a long list of numbered "MICROSOFT 6to4 ADAPTER". My Windows 7 Professional Office had 200 of them. Right click and select 'DELETE' on all but 1 of them. You can only do 1 at a time, so it takes some time. When you have only 1 left, restart the computer and enjoy being able to see the other computers on your network, including the RESIDENTIAL group files.

• I have a problem with the wireless network card.

  Hello

  I use a laptop Medion MIM 2210 and I have a problem with my wireless network adapter.

  I get a message before Windows 7 starts telling me that there is problem with a wireless driver. The exact message says:

  "Intel UNDI, PXE - Z.0 (build 082)

  Copyright (C) 1997,1998,1999 Intel Corporation

  VIA Rhine II Fast Ethernet Adapter v2.43 (2005/12/15)

  PXE - E61: Media test failure, check cable of

  "PXE - MOF: exit Inel PXE ROM.

  This message appears every time you start and I don't know what he means by "Media Test Failure".

  I turned on my laptop today and noticed I had no internet connection, it showed that it connected but with yellow '!' symbol indicating that it was not fully connected. He did this for a while now and I have reinstalled Windows, in safe mode and I tried to delete the drivers and re - install, but it hangs right on uninstall what makes me angry no the case.

  Of course now, I tried to look for help my internet connection is running but the message is still there. Can someone tell me what to do or how to solve this problem, I am standing now on what to do. I was also on the drivers Medion website but it is impossible to navigate around and drivers without end there'e to choose. I would consider ringing them and asking them if they were not located in Germany as it would cost me a bomb! I did just now searching online via the Device Manager to see if he can find an update for the drivers but nothing came.

  Thanks for any help that anyone can offer :)

  The message is to be cause the BIOS looking for boot from LAN (not wireless) before it starts and then from the hard drive. The Media test failure is because to boot from LAN it tests to see if the wired Ethernet is connected, it is not if it generates the error message.

  Enter the BIOS press F2 after initial power on but before the Logo Windows shows

  Integrated devices should allow you to set the settings of wired network adapter. According to the BIOS it is either "enabled with PXE" or have another option to enable or disable the boot ROM

  In the boot options the LAN card should be removed altogether.

  This message is ONLY applicable to the transfer of the BIOS boot process and should have no impact on the problems of WiFi (it is not on WiFi)

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• diagnostic/troubleshooting problems connecting to 11i/R12

  can someone give me the links or the docs of Mos for the diagnosis of troubleshooting problems connecting to 11i and R12
  
  all the suggestions/help much appreciated in advance

  Hafiz says:
  Thanks for the link, it is useful for the side db

  What enforcement side as I said 11i/R12

  Please see these documents.

  R12: Troubleshooting 500 Internal Server Error in Oracle E-Business suite [813523.1 ID]
  Special connection Home Page issues in 11i [ID 135027.1]
  Oracle Application Server diagnostic tools and logs in Applications, version 12 [454178.1 ID]
  R12, 12.1 - how activate and collect Debug HTTP and OC4J OPMN [ID 422419.1]

  Thank you
  Hussein

• Persistent problems with wireless home network

  Hi, the problem started two weeks or more ago, when after the connection to the internet easily using our wireless network connection, my computer began to say that our domestic network was unidentified, then studied by troubleshooting my self but do not really understand the information the computer indicated to me. As it was a problem of the internet I contacted our local provider broadband, they looked like the line and the service was absolutely perfect and to confirm this router computer of my father in the same cable network has internet connection easily as it was my mom who was using the connection via the same router wireless cell phone.
  Following the instructions of technitians I have tried to manually enter internet addresses to see if that would help the internet connection, it did. So I thought that the problem has been resolved. I had the use of the internet that day and everything was fine until I restarted the next morning. The problem reappeared. So I called my internet provider again, this time I'm sorry to say to a girl rather too quickly diagnosed that I had a virus to uninstall Google chrome and reinstall a different browser... That didn't make sense to me, but I tried some sort.  So I moved my office tower and all the bits in one place in the House were we could conect it to the router with an ethernet cable followed his instructions then moved the computer to its original position but still no internet connection and still this problem 'identification '. I turned off the machine and tried again the next day. Start by running the troubleshooting of network problems, this time I looked at the detailed report which curiously stated that the computer had difficulty oscillating between two somethings (sorry don't remember the detail correctly is days ago)
  So I called my internet provider again and I am a helpful young man, read him the information and examined the reports that they had written about the problem in the days preceding. I followed his instructions looked in the network sharing Center, settings changed and added in manual codes for the internet, turn off the router for 10 seconds or more and then restarted, this time with not even a temporary success. We tried a few things but I always got the same contradictory message in the dialog box in the lower right corner, where it showed I was connected to the local network not connected to the internet, when I opened the network sharing Center from the local network to the router would show that 'Identification' and the conection to the internet would be marked with a cross. I managed to pass my network profile is for some reason any defined to the public rather that home and we were able to change it (even if it wasn't easy)
  So I was told it was probably a driver issue, I was told I might need check the updates of my license on this operation the technitian and I also saw the site of netgear, that there was a potential conflict between Kaspersky and the netgear driver, so I need to uninstall my Kaspersky anti-virus stuff and the old pilot , down load and install the new drivers and then reinstall kaspersky. I followed it. (Movement of the tower and all the bits in place in the House were the ethernet cable was available).  I found an updated driver, uninstalled downloaded kaspersky and run only the driver installed Kaspersky again. Everything seemed to go well and I even plugged in the wireless adapter connected to the internet through that and disconnected the cable... things were going well.
  So I turned off the machine and carried over into my room where I turned on once again. The problem reoccured. I thought it was time to communicate with kaspersky. So I turned the computer off and reduced to the ethernet cable. Connected a Kaspersky contacted by e-mail, they were quick and I was asked to run a program that logeed my information system. I did this and I told them I thought it might be a conflict between the driver and their softwear, they have looked into it, asking me to run a misuse of this program and the results by e-mail. Once again, I've followed the instructions and took notes, but no problem was found. They showed me how to configure my kaspersky firewall to allow access to the networks. It's when I was doing that I noticed that the computer had five ads of our home network, so I put all the profiles of their trust, apply changes and tested to see if it would work. On the wireless internet in the office where the ethernet cable and a router are by train, it's good, it works. I connected the wireless network and disonnect the ethernet then on the internet and there is no break in service. But if I shut down the computer and set up in my room at 12 meters, it won't work with signal strong (4 / 5 bars are green).

  This morning I watched the windows firewall settings and changed some of them to see if that makes a difference. but none.

  I'm trying hard to think about this problem but I'm getting nowhere fast, I know just enough. I just tried pluging in the wireless network adapter again, but there is no wireless network connection now and no internet connection:

  After having tried downlaoding a new driver and this has not fixed the problem after having only tested the wireless signal is strong enough for good internet connection to my mother's computer in my room, I'm stuck. I looked on the netgear site and follow their advice, but it's really a night Mare!
  I also noticed that somehow, we put in place five versions of our home network, I wonder if there is some confusion computer... I looked into the idea of the removal of the networks, and it seems that you can not do. I am trying to back up my files, uninstall everything and re - build my computer from scratch. If there is something else I should try before taking this message please drastic measures me ASAP.

  Hello

  1. What is the operating system installed on your computer?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Resistance problem for the wireless network password

  I have a v300 tablet, when I try to connect to my wireless network and I put the password wireless I get an error that reads: "the network passwords must be 40 bits or 104 bits according to your network congifuration, it can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters."
  Any ideas on the problem, what to do or how to fix it?
  • .

  Try the following: Wireless Networking Troubleshooting Carey Frisch

• I have a problem with my location network cards and I can not find my LAN on my PC.

  I can't find my LAN

  Hello! Im having trouble with the location of my network cards and I can not find my LAN on my pc - I have recently updated my software with phone system automated.

  Hello

  Perform the steps in the article mentioned below and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Hope this information helps.