trouple with playlists in media player

Similar Questions

• I downloaded with Firefox; Windows media player plugin decoder and when I go to play dvd, windows media player tell me that my computer doesn't have a decoder installed.

  I downloaded with you windows media player decoder plugin and when I watch a dvd on my computer (I have the dvd) windows media gets up and tells me there is no decoder installed on my computer... I cannot also watch videos on utube, etc in the list of programs in the plug of your is listed as installed.

  Please see this page for a list of decoders that you could use for reading DVD http://windows.microsoft.com/en-US/windows/downloads/windows-media-player/plug-ins .

  If my answer has solved your problem, please click 'Solved It' next to this response when logged in on the forum.

• I'm having a problem with my Windows Media Player and its automatic scoring system.

  I'm having a problem with my Windows media player and its rating system. Usually in Windows Media Player the blue side star system only rate once internet-based critical car. Then after playing constant song change the blue stars. However, on my Windows Media Player ratings only to have automatically scored only once and every time I play the song the side remains the same.

  Whenever I play a song in Windows Media Player 11 it rates the song but when I play the song again the rating remains the same. It auto-taux only the song once. How can I fix it?

  chk this link

  How are ratings used in Windows Media Player?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-are-ratings-used-in-Windows-Media-Player

• I am trying to sync my ipod with my windows media player and when I connect my ipod windows media play is not read. How can I sync my ipod with windows media player?

  I am trying to sync my ipod with my windows media player and when I connect my ipod windows media play is not read. How can I sync my ipod with windows media player?

  Hello

  Your MP3 player should have 2 settings - MSC that should allow the player to be used as a
  external drive and PSG that is the parameter to use to sync with WMP11. Remove the MP3
  and restart the computer. Change the MP3 in MTP mode - it power off and plug it in.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Can I copy music FROM my MP3 player to a new playlist in Media Player?

  Original title:

  Windows media player

  Can I copy music FROM my MP3 player to a new playlist in Media Player? If the answer is 'yes' Please give me some very simple instructions on how to do it.

  Thank you

  Joe Hawkiins

  Hello

  You can use Windows Media Player to copy music, videos and pictures of the Player library to a portable device, such as a compatible MP3 player or vice versa. This process is called synchronization.

  You can see the links below and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-device-to-sync-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-sync-frequently-asked-questions

  I hope this helps!

• How can I add music, I downloaded with IMESH on Media Player.

  Original title: Media Player

  How can I add music I downloaded with IMESH on Media Player

  Locate music IMESH downloaded on your computer's hard drive, then you can drag and drop the music in windows media player.

• Satellite A210 - how to use the muldimedia with other than Media Player buttons

  Hello

  is it really not possible to use media keys (Play, Pause, FF) on top of my laptop for an application other than Windows Media Player?
  Is there a reason for this? I would like to control Winamp with this button.

  It seems quite sensless to restrict access to a SINGLE application of HUNDREDS available, a then it is the multimedia player that is not used by most people.

  I have the Satellite A210 Notbook.

  Can you tell my how to control my winamp with these buttons?

  Greetings from Robert

  Hello, Robert

  Unfortunately, there is no solution at the moment. If you check this forum, you will find several very interesting discussions on the multimedia buttons and Winamp player. The fact is that some people have found the solution for older models of laptops running Windows XP Home edition. Winamp has offered the plugin must be installed.

  We now have the new situation. Your laptop is running latest Vista OS and I didn t find any plugin that can help. Problem is that your laptop is designed for Windows Vista preinstalled OS contains all the necessary plugins for Windows media player running under the operating system preinstalled.

  Is any kind of restriction. With preinstalled operating system you can do what you want and if you can find a way to change it for that. You know very well that there are hundreds of different players in the market. You can't wait for Toshiba take a time and create a plugins for each other and satisfy customers around the world.

• Strange problem with Toshiba Express Media Player on Satellite M115-S3094

  I am facing a strange problem in my Toshiba M115-S3094, which has been pre-installed with Windows XP Media Center edition and which also had the Toshiba Express Media Player.

  I had already done a clean install of Vista on it, and then I decided to go back to XP with my recovery DVDs. I did the same procedures of first installation Express Media Player to backup (that I did when I bought the laptop) and then installing Windows XP DVD de Toshiba Recovery XP.

  The steps included:
  1 deleted recovery Express media player disk partitions
  2. installed express media player
  3 extracted Xp Recovery DVD, by selecting 'Recover without changing the Partitions' (there is no expert mode)

  Everything was fine (i.e. installation)... But now, after the turning off my laptop I press the Express Media Center button, the logo "Express Media Player" appears on the screen after loading of closures of laptop for 5 seconds.

  I tried to open it again and again, but the logo is displayed for 5 seconds and then my laptop stop...

  Laptop works fine when I connect to windows by pressing the power button / stop.

  Can someone help me on this strange question... ?

  Hello

  The whole story is a bit confusing
  First of all, I would like to know if your laptop is already preinstalled with the Media Express Player and if you were able to use it on your laptop in the past.

  Now something about the Express Media Player installation;
  In order to use the media functions Express the Mediaplayer Express Recovery CD must be performed before performing the recovery from the recovery DVD-ROM products.

  In addition, on the HARD drive should at least 150-200 MB of free space available.
  This free space must be on the end of the HARD drive and there must be unallocated. To get these free space on party products 3rd HARD drive should be used as Partitions Magic 8.

  I m not 100% sure that on error ID system badly but maybe it corresponds to the DMI evil information stored on the motherboard. If we're not DMI, you will not be able to reinstall Express Media player using the recovery media express CD.
  In the DMI must be set properly the manufacturing: Toshiba, product name: for example by Satellite M115-S30

  Finally and most importantly, I found this thread useful forum on the Media Express recovery procedure:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=51801쩙

  Could be useful for you!

• Hi help!, a musician with a windows media player/microsoft Blender exe went missing and its judgment to make the tunes = C, help please (lack of file Sndvol32.exe)

  Hi help would be appreciated, Im using parents pc at the moment = s, sound on Home Edition XPservice 3 Pack, and it is an AMD Athlon 64 x 2 Dual Core processor 3800 + 2.01 Ghz, 2.87 GB of Ram. Now the problem is that I lost an exe file and by the looks of it, im not gunna be able to recover in any case I try the download, Win CD etc. Its Sndvol32.exe which seems to have misplaced somewhere, Im using or has been properly anyway Windows Media Player 11, I think it's the microsoft default mixer soz not great with computers as long as that. I get error when I try to click on the sounds of the control panel ETC and try to click to see the media icon in the task bar for example, it would not really matter to my parents but because im back with them for a week, I installed a program of music cause I can't live without seeking to produce music so I need to find this bug annoying ideas would be much appreciated, cheers

  Maybe the next thread would offer a few ideas:

  Absent SndVol32.exe
  http://forums.techguy.org/multimedia/517401-sndvol32-exe-missing.html

• I bought a webcam there is brand new TI conflicted with my nero Media Player

  Yes, I bought a vimicro webcam with construction earlier in the microphone and it seems to be in conflict with my nero Player 5.5 since I received the camera that it affects my sound recording in my media player it's a usb external camera ive tried to install and reinstally to see if it would make a difference what I can do to remedy this problem thanx hope to hear from someone to step instructions by step

  Yes, I bought a vimicro webcam with construction earlier in the microphone and it seems to be in conflict with my nero Player 5.5 since I received the camera that it affects my sound recording in my media player it's a usb external camera ive tried to install and reinstally to see if it would make a difference what I can do to remedy this problem thanx hope to hear from someone to step instructions by step

  http://www.Nero.com/enu/support.html

• problems with RIP in media player

  I have this version of windows media player on my windows vista ultimate system: Version 11.0.6002.18311. since earlier can't rip audio cd previously etched in the reader. there don't seem to be able to read the content on this cd, as it worked fine before. on the insertion of a cd as one (containing a summary of the audio tracks), when tab extract, either the menu list evil pops out (which doesn't have a "rip" option) or there is no response from the system at all. Help, please

  Hello

  To provide the proper resolution, I would need more information on your side.

  1. do you receive any error messages? If Yes, what is the exact and complete error message?

  2. did you of recent changes on the computer before this problem?

  This problem may occur if Windows Media Player settings are incorrect.

  Method 1:
  I suggest trying the steps and check if that helps.

  (a) in Windows Media Player, click Tools.

  (b) click Options , and click devices.

  (c) click on the CD in the drive and choose Advanced Options.

  d correction) the value of the error to you.

  Method 2:
  If the problem persists, you can try the steps and check if it helps.

  (a) Open Windows Media Player.

  (b) click on Tools, Options, then choose tab Devices.

  (c) select the CD-ROM drive , and then click Properties.

  (d) select the digital error correction and use on the reading portion both Rip.

  (e) click apply and then click Ok.

  (f) try to rip music and check.

  See the links for more information.

  Change settings for ripping
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-ripping-music

  Rip music from a CD:

  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Not able to play a video with the windows media player 11

  Hello everyone,

  I'm french so please forgive my bad English. I work with Vista and my concern is that I can not play videos on my windows media player. When I open a video, there is only music or voice, never the image. I tried K-lite, but to no avail, please help. Thank you for your response.

  Hello

  ·        What is the file type of the video that you play?

  ·        Are you play DVD files or files stored?

  Method 1: I suggest that you update the video card driver and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: You can also try to reduce the hardware acceleration and check if it makes a difference:

  a. choose Start > Control Panel.

  b. double-click personalization and select display settings.

  c. click on advanced settings.

  d. click on change settings on the Troubleshooting tab.

  e. move hardware acceleration to none.

  f. click on apply and then click OK to accept the new setting and close the dialog box.

  g. click OK to close the display properties dialog box.

  h. restart Windows.

  Method 3: I suggest to Uninstall any third-party codec installed on the computer and then check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  See also: support for technical problems of Windows Media Player

  http://support.Microsoft.com/ph/7763

• problems with my windows media player. It doesn't let me see any dvd.

  When I choose to play with wmp. It says wmp cannot play the dvd. You must go to the control panel and adjust the windows display settings. lower screen resolution and color quality settings BUT when I do all this and try again, IT STILL does not work. Help, please.

  Have you ever had success on DVD playing on this system?

  Maybe you need a DVD decoder?

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you could try one of the following free media players
  who should read DVDs:

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

• convert wma to mps with the windows media player 11

  How can I convert wma to mp3 with windows media player 11.

  There are other versions of window media players who had this.

  You can burn a CD of music with WMA files
  and then it RIP with MP3 as a format target.

  Windows Media Player 11 for Windows Vista
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
  (Expand the section: "Burn audio CD")

  Windows Vista - rip music from a CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  Windows Vista - change settings for ripping
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-ripping-music

  Or you can use the following free software:

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your. WMA clips on the main screen...

  Select "all to MP3" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• More! incompatible with Vista or Media player 11?

  After the new installation of Vista Edition family premium & Media player 11, try to install more! Digital Media Edition 1.1 and get Program Compatibility Wizard the "this program has known compatibility issues", performs a check of online solutions and back to 'no solution not found'.  Try to record from vinyl.

  Hi headway.
   
  To troubleshoot program compatibility issues in Windows Vista, try the method below, if it does not solve the problem you are having, try each successive method in the order mentioned in the article below.
   
  Visit the Windows Vista Compatibility Center visit the Windows Vista Compatibility Center to perform the following tasks.

  • Find out which software and devices are and are not compatible with Windows Vista.
  • Look for links to drivers and upgrades that will make your compatible computer.
  • Provide feedback to help us improve the experience of the upgrade.

  For starters, visit the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/compatibility (http://www.microsoft.com/windows/compatibility)

  You can also follow the link below:

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  Hope this information is useful.

  Concerning
  Rehman - Microsoft Support