Try to collect events to a log file and the Agent installed Linux and work - need help.
I modified liagent.ini by documentation... If I understand well it... actually I changed so many times my eyes hurt.
Here it is:
; Configuration of the Agent of VMware Log Insight. Please save it in UTF-8 format if you use non-ASCII names / values!
; The actual configuration is this file that is associated with the server settings to form animal - effective .ini
; Note: The agent is not necessary to restart after making a configuration change
; Note: It may be more efficient to configure Server Agents page!
[Server]
hostname = 192.168.88.89
; Name of host or IP of your Server Log Insight / load balancing cluster. By default:
; hostname = LOGINSIGHT
; Protocol can be cfapi (Log Insight REST API), syslog. By default:
proto = cfapi
; Server port connect Insight to connect to you. Default ports for protocols (TCP all):
; syslog: 514; syslog with ssl: 6514; cfapi: 9000; cfapi with ssl: 9543. By default:
port = 9000
; Use SSL. By default:
SSL = no.
; Example of configuration with the certification authority:
; SSL = yes
; ssl_ca_path=/etc/PKI/TLS/certs/CA.PEM
; Time in minutes to force the reconnection to the server.
; This option reduces the imbalances caused by the long lifetime as TCP connections. By default:
Reconnect = 30
[record]
; Logging detail level: 0 (no debug messages), 1 (essentials), 2 (verbose with more impact on performance).
; This option should always be 0 in normal conditions. By default:
debug_level = 1
[storage]
; Local max storage expiration (data + logs) in the valid range MBs.: 100-2000 MB.
max_disk_buffer = 2000
; Uncomment the appropriate section to collect log files
; The recommended method is to activate the content pack Linux server LI
[filelog | bro]
Directory = / data/bro/newspapers/2015-03-04
; include = * .log
parser = auto
I post it here, I have created a support pack?
Post edited by: I added a screenshot of the status of the personnel of kevinkeeneyjr
Post edited by: kevinkeeneyjr added liagent.ini
Ah! Yes, the agent is to collect real-time events. If no new event is written then it won't work. If you want to collect logs that have been generated before you use the importer of Log insight which was published with LI 3.3. I hope this helps!
Tags: VMware
Similar Questions
-
Questions looking for events from a log file
I have the windows agent installed on some servers to monitor log files and run into problems trying to find specific events. I can see the events under HERE if I do a host name contains the name of the server, but if I then try to filter or search who, following the events specific to find I get no results. Also even when I'm filtered by host name and can view event I want to if I highlight and select "Contains: the data I want" she returned with no results.
Another experience that or I do something wrong?
Okay, after review, it appears that the journal file is in UCS - 2 format. By default, the agent LI uses UTF - 8. The agent also supports UTF-16, which is the most recent version of THE of UCS - 2 (which has been deprecated in 1996). In the filelog liagent.ini you try to add:
charset = UTF16 - THE
Let me know if you have any additional questions! If your question is answered can you please mark as answer?
-
I followed several other discussions about the inability to install this update, but I succumbed.
My problem started when I did a system restore to solve a problem with a newly installed program.
Under update history, windows update is of the opinion that this update has been successfully installed several times.
The 954430.log log file is not present in my windows directory.
The update is not present in the list of installed updates.
I moved msxml4.dll and msxml4r.dll in the system32 directory. When I try to reinstall KB954430 manually, the following error message is received: "error opening installation log file. Verify that the specified log file location exists and is writable. »
Thanks in advance for your help.
Thanks for the attempt to help Umesh P. Went before your answer.Something I've done has solved the problem, if I'm not 100% of the exact solution.So, I found some of these random number files that contains kb954430 log files in the home directory of my swap file partition. I deleted these.
I tried to reinstall manually, it still gave me the same "log file" error as described in my post above. Then, I tried to install it via the automatic update service. Then, he stated that the update was not necessary. The update kept bugging me on this subject, but finally, after a reboot or two, I noticed he had stopped to ask.My computer seems to work now, as far as I know, although I do not have the patch installed in my list of updates, and the msxml dll never came back. Is there a chance that the patch was never installed and he abandoned? -
Hello
I have installed:
-(Oracle Linux) OL 6.6
121 GB HD
5.0 GB RAM
-JDK-7u80-EA-bin-b05-Linux-x64-20_jan_2015.tar.gz (Java)
-Fmw_12.1.3.0.0_infrastructure.jar (infrastructure)
-Fmw_12.1.3.0.0_ohs_linux64.bin (SST)
I try to install OBIEE, I unzip these files:
-bi_linux_x86_111170_64_disk1_1of2.zip
-bi_linux_x86_111170_64_disk1_2of2.zip
-bi_linux_x86_111170_64_disk2_1of2.zip
-bi_linux_x86_111170_64_disk2_2of2.zip
-bi_linux_x86_111170_64_disk3.zip
I run/home/oracle/OBIEE/Disk1/runInslaller and open the screen to select the oraInventory directory, when I click OK, the error message appears (see image below):
[oracle@localhost Disk1] $. / runInstaller
Iniciando Universal Oracle install...
Espaço Verificando Temp: deve ser superior a 1536 MB. Passado Reais 36602 MB
Verificando swap Espaço: deve ser superior a 500 MB. Passado Reais 2553 MB
Verificando monitor: deve ser configurado para exibir pelo menos 256 cores. Reais 16777216 Passado
2nd para iniciar o Oracle Universal Installer from/tmp/OraInstall2015-09-13_08-13-50 h Aguarde... [oracle@localhost Disk1] $ 13/09 / 2015 20:13:53 oracle.as.install.bi.util.ConsumerUIProperties getCustomPropertiesFilename
INFO: Using a custom UI properties of the oracle/as/install/bi/config/consumer-ui.properties file
[ERROR]: error initializing log values
oracle.as.install.engine.exception.LogInitializeException: Espaço insuficiente para criar os log archives na Localização address para o inventario. Espaço shouts ob o inventario especificado/home/oracle/oraInventory UO aponte para outro inventario
to oracle.as.install.engine.logging.EngineLogHelper. < init > (EngineLogHelper.java:65)
at oracle.as.install.engine.logging.EngineLogHelper.initialize(EngineLogHelper.java:192)
to oracle.as.install.engine.InstallEngine. < init > (InstallEngine.java:135)
to oracle.as.install.engine.InstallEngine. < clinit > (InstallEngine.java:130)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:603)
In English:
oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory
What can be?
Well, you very probably not a lot of space on the left under/Home.
You can move to another location that is located on/home/oracle/orInventory the / partitioning of the partition where you probably have more space left if you used the default value.
For example, as a root user:
mkdir/U01
MV/home/oracle/oraInventory/U01
Update /etc/oraInst.loc and replace
inventory_loc = / home/oracle/oraInventory
with
inventory_loc = / u01/oraInventory
-
Expectations extended on synchronization of log file while the parallel writing journal is fine
We have 9.2.0.8 as experiences of long waits on the database log file sync (average waiting time = 46 ms) while waiting for the log file write Parallels is very good (average waiting time is less than 1 millisecond).
The application is of type middleware, it connects to several other applications. A single user in a single application action train several requests to send back through this middleware, so he needs response time of db in milliseconds.
The database is quite simple:
-It has a few config tables that the application reads but rarely updated
-She has table TRANSACTION_HISTORY: the application inserts records into this table using Insert einreihig (about 100 lines per second); each insert is followed by a validation.
Records are kept for several months and then purged. The table has only column VARCHAR2/NUMBER/DATE, no LOBS, LONG, etc. The table has 4 non-unique single-column index.
The average line length is 100 bytes.
The load profile does not appear something unusual, the main figures: 110 transactions per second average transaction = 1.5 KB size.
The data below are to 1 hour interval (purge wasn't running during this interval), physical reads or writes physical rate is low:
Load profile
~ ~ ~ Per second per Transaction
--------------- ---------------
Size: 160,164.75 1,448.42
Logical reads: 521,58 57 675,25
Block changes: 934,90 8.45
Physical reads: 76,27 0.69
Physical writings: 86,10 0.78
Calls of the user: 491,69 4.45
Analysis: 321,24 2.91
Hard analysis: 0.09 0.00
Kinds: 126.96 1.15
Logons: 0.06 0.00
Runs: 17.70 1 956,91
Operations: 110,58
Top 5 events are dominated by the synchronization of log file:
Top 5 timed events
~~~~~~~~~~~~~~~~~~ % Total
Event expects Ela time (s)
-------------------------------------------- ------------ ----------- --------
401 608 18 448 59.94 file synchronization log
db file parallel write 124 044 3 404 11.06
CPU time 3,097 10.06
Enqueue 10 476 2 916 9.48
DB file sequential read 261 947 2 435 7.91
Section events:
AVG
Total wait wait wait
Hour of wait time wait for the event (s) (ms) /txn
---------------------------- ------------ ---------- ---------- ------ --------
Synchronize 0 401 608 46 18 448 1.0 file log
db file parallel write 124 044 0 3 404 27 0.3
Enqueue 10 476 277 2 916 278 0.0
DB file sequential read 261 947 0 2 435 9 0.7
buffer busy waits 11 467 67 173 15 0.0
SQL * Net more data to the client 1 565 619 0 79 0 3.9
lock row cache 2 800 0 52 18 0.0
control file parallel write 1 294 0 45 35 0,0
Log end of switch file 261 0 36 138 0.0
latch free 2 087 1 446 24 12 0.0
PL/SQL 1 1 20 19531 0,0 lock timer
log file parallel write 0 143 739 17 0.4 0
db file scattered read 1 644 0 17 10 0.0
sequential log file read 636 0 8 13 0.0
Log buffer is about 1.3 MB. We could increase the log buffer, but there is no log buffer space waits, so I doubt this will help.
Newspapers in recovery have their own file systems, not shared with the data files. This explains the difference between waiting avg on parallel writing of log (less than 1 ms) file and db file parallel write (27 ms).
Restoring logs is 100 MB, there are about 120 journal switches per day.
What has changed: the pads/validations rate grew. Several months ago there were 25 inserts/validations per second in the TRANSACTION_HISTORY table, now get us 110 inserts/validation per second.
What problem it causes application: due to slow down the reaction of the basis of the application (Java-based) requires discussions more and more.
MOS documents on synchronization of log file (for example, 1376916,1 waits for troubleshooting "log file sync") recommend to compare the average waiting time on synchronization of log file and the log file parallel write.
If the values are close (for example log file sync = 20 ms and log file parallel write = 10 ms) so expectations are caused by nits IO. However, it is not the case here.
There was a bug (2669566) in 9.2 which resulted in underreporting lgwr parallel time of writing to the log file. I was talking about September 2005, during which the bug was present in 9.2.0.6, reported 10.1 fixed in: file parallel journal written (JL Comp) it is possible that your problem IS written to the log file.
Concerning
Jonathan Lewis
-
Need help re install PS CS6, who disappeared off a pc users. I connected to Adobe and downloaded the installer. When I try to run the installer I get an error pop up. "We met the following problems Installer failed to initialize. This could be due to a missing file. Please download Adobe Support Advisor to detect the problem. "Such advice no longer exists! Help
Hi PCBs % century 40,.
'Download Support Advisor' is a generic error, and we need to understand what is causing the problem. Most of the time, its a problem with the download was not successful or downloaded correctly. So, in this case, re-download the software and do not forget to compare the file size of the file downloaded with the file on the server. Download Creative Suite 6 applications
Allows you to check in this case as well and make sure that the download is complete, if the size of the file is correct, to the install.log file.
Navigate in the log files in one of the following folder:
Mac OS: / Library/Logs/Adobe/Installers /.
C:\Program Files (x 86) \Common Files\Adobe\Installers\
The name of the log file includes the name of the product and installation date, followed of ".". log.gz."the .gz extension indicates a compressed format.
You can use WIN RAR to extract the 7z or gz file:
WINDOWS: http://www.rarlab.com/rar/winrar-x64-531.exe
MAC: WinRAR download and support: post-Télécharger
Once unzipped, the log file is a text file, open the .log using TextEdit (Mac OS) and notebook (OS Win)
Scroll to the bottom of the log. Look in the section - summary - for lines that begin with ERROR or FATAL and signals a failure during the installation process.
Copy and paste this section SUMMARIZED here so that we can check for errors. Alternatively, you can analyze the logs yourself. http://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-install-logs-CS5-CS5.html
Let us know if that helps.
-
The "Log FIles" in the coldfusion 9.01 administrator access error
When I try to look at the log files in cfadmin, I get this error:
Diagnosis:
The isSystemLog method was not found. He doesn't are has no method with the method specified name and the arguments types or the isSystemLog method is overloaded with argument types ColdFusion cannot decrypt reliably. ColdFusion found 0 methods that correspond to the provided arguments. If it is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity.
The error occurred on line 283I have also noticed that the scheduled tasks 'Last Run' does not update. I enabled logging in cfadmin for scheduled tasks and created a scheduler.log with all the tasks being connected and running properly for this.
I am at a loss here and really need help before going to live with that.
The problem has been resolved, it seems that the update applies without error due to the fact that a mail app kept the cfperfmon_9.dll in open C:\windows\system32 which prevented the 9.01 update to crush the original.
Thank you all for your help! works fine now.
-
SQL * Loader - can I specify the log file in the control file
SQL * Loader - can I specify the log file in the control file? If so howYes,
Try sqlldr "echo $command_line_par".
Note: ' back quotes
Kind regards
-
I tried to launch my Spysweeper and found that is not there, then I re downloaded and I could not install it because it was already on my computer. I went to the control panel to remove and got the message:
Windows cannot find C:\WINDOWS\system32\rundll32.exe. Make sure you typed the name correctly and then try again. To search for a file, select the Start button and then check the search...
What should I do?
Hi gsrow,
You can go there!
Cannot find the Rundll32.exe file when you open the control panel:
http://support.Microsoft.com/kb/812340Alternatively, copy the folder C:\Windows\System32\DllCache Rundll32.exe file to the System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]
-
Hi all
My question is:
Transaction is written to the log file and it is not written to undo tablespace.
During a failure of the system how oracle rolls back the transaction.
I have already provided the answer, you ignored if well (you seem to only read the responses by people of your country).
Redo log is always written * first * before * writing to the data block (redo log writing is much more aggressive). So it DOESN 'T MATTER if you lose these scriptures of rollback segment.
Valuation: rear roller followed by roll forward, using redo log files and/or archive redo log files.
Sybrand Bakker
Senior Oracle DBA
-
When I try to duplicate a layer from one file to the other why appears a window of "displacement"? What should I do?
Never seemed this before.
Thank you
I can't reproduce this. The layer as you try to duplicate a smart object and there a displacement map? Looks like you might need to reset your preferences.
-
Where to see the log files from the runtime
For my setup, the location mentioned in the documentation here http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/admin_guide/index.html?t=modules/logging/c_Head_Logging.html does not contain the log files. Where can I find more information on the research log files and also more importantly how I connect the BPM process. Is there one out of the area of activity of the newspaper available in BPM. I found nothing in the documentation.Go to this link: Re: save the Message in the Studio
Paragraph number 4 shows how to find the current log file.
Dan
-
Error recovering files and I need to install installation directory Extender player
"Question: how to fix this problem: a sign keeps coming up saying:" recovery error file and I need to
then how should install Drive Extender for the installation directory", I do this?
Hello
(1) don't you make changes to the computer until the problem occurred?
(2) when was the last time it was working fine?
(3) operating system do you use?
I suggest to follow the steps in the link below and check if it can help
Method 1: Try to start your system in safe mode and check if the same problem occurs.
To start in safe mode, see the link below.
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
(For Windows Vista)
Method 2: Also I suggest you try to perform a clean boot from the following link
http://support.Microsoft.com/kb/929135
Make sure that restore you the computer to a normal startup mode once the diagnosis is made.
Hope this information is useful.
-
The # is not my # send my security code. You have the wrong number on file and I need to access my account. How do I allow you to select the correct number or can I change my profile somehow and change the phone number so that you can issue a new security code, or determine what is my existing code. I don't seem to have a number 7 digits on file anywhere.
Thank you
George Sedlack
Please contact support for Microsoft Outlook, Mozilla has no relationship with Microsoft Outlook.
-
What is this file and I need this file? The message says it can't find the module.
Hello
You have recently uninstalled software Logitech?
Follow the steps in the solution here:
Maybe you are looking for
-
Presario cq50: by clicking in the top left
When I turn it on, I get a clicking sound on the top left. Yet, there is an operating system on it. It gave me a year ago and it not working find. I pulled out of storage and put a hard drive in it and turn it on and got a clicking sound. I even p
-
my computer must be started in safe mode and then restored after that I installed updates
This problem started in 2010 object. I had to reinstall Windows for the second time, the problem started on 30-45 days after that.
-
Impossible to access or update Microsoft Security Essentials
After years without problems, I can't access MSE. On startup, I get a dialog box saying "' an error has occurred in the program during initialization. If this problem continues, contact your system administrator. Error code 0 x 80070715. If I try to
-
Windows 7 Build 7601 copy is not authentic - very slow computer
-Very well, so I am posting this from my smartphone because my computer is slower than a brick right now. As the title says, my computer is saying that my copy of windows is not genuine. Who is Mario total I had zero proboems since the acquisition in
-
Removal of blackBerry Smartphones Yahoo Messenger
Hello all, I no longer use Yahoo messenger and it seems that I deleted the application. The only thing is the icon is still on my home screen and lights up as it still works. When I select a browser window opens for the option to download. I don't se