The "Log FIles" in the coldfusion 9.01 administrator access error

Similar Questions

• Reading a binary file - access error

  I am new to the discussion Forum OR and had a basic question on the use of Labview to read a binary file.

  For my application, I need Labview to collect a single value (pulse width) of a custom program that is written in C++. Currently, this value is stored in a temporary file of binary data. I'll run Labview and the custom program at the same time.

  Is it possible to read a binary file using Labview while the file is written by another program to? At the moment I get an access error. I use a binary code to read the library of example Labview base.

  Thanks for your suggestions!

  I'm surprised that Windows would let you copy of the file if the other program still has a lock on it.  How you try to open your file in LabVIEW now?  Maybe if you open the file with accesss unalterable, Windows will allow you to open it in LabVIEW.

  Yes, you can copy files in LabVIEW.  There are functions to copy under the palette file IO.  In addition, you can use a copy within the service system Exec command.

• Don't recreate the log files deleted ColdFusion MX?

  Within the CF Administator in the log files section, there is the option to delete a log file (IE Application.log). If I remove that, it re - create by the CF Server?

  ColdFusion creates a new version of a log file if it does not already exist. This is the case on a new server startup, archiving of existing newspapers or removing the logs.

• I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  Just a log message system that does not mean nothing, except an engineer. If you don't know what mean the entries in log file, and then save your time and forget about unless you have serious problems.

• How can I connect name BT IDS of devices in a log file by using the Toshiba BT stack

  Hello

  without Microsoft stack, I can't use a lot of freeware programs (BluetoothView.exe, BluetoothCL.exe, BTScanner for Windows), to 'catch up' bluetooth devices in a log file.

  How can I connect names bt ID/description of the devices in a logfile using the Toshiba Bluetooth stack?

  Thank you

  I don't know if there's a tool for that. However, it should be possible with some Bluetooth SDK controls.

• Mail creation of massive log files and stop the synchronization with the server

  Since the upgrade to El Capitan (10.11.1), Mail presents two problems persist:

  (1) it generates massive log files, e.g. 2015-12 - 03_IMAPSyncActivity.log these files regularly exceed 10 GB and block Mail and freeze the Mac. Mail can be over 8 GB of RAM. Once removed, Mail recreates the file and fills again, ends up doing more massive files that must also delete.

  (2) mail stop sync with my different IMAP e-mail servers. The only solution I've found that it completely delete the or the e-mail accounts and reinstalls the account. It works for a day (or even a few hours) before it just stops the synchronization, even if a connection test shows he connects with the server. This problem seems to occur on two e-mail accounts separately on two different servers / hosting companies, but not on my Gmail accounts.

  These two problems occur on both my iMac (21.5 ", mid-2011, 2.5 GHz Intel Core i5, 8 GB RAM) and MacBookPro (13', mid-2011, 2.5 GHz Intel core i5, 4 GB RAM).

  Full of ideas gratefully received!

  Thank you!

  Please take these steps to remove the mail folders 'sandbox '.

  Step 1

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Reveal

  the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

  Restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

  CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

  Step 2

  If step 1 does not resolve the problem, repeat with this line:

  ~/Library/Containers/com.apple.MailServiceAgent

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Is it possible to edit the ultiboard log file (v10.1.1)?

  I made the mistake of removing parts of a design Ultiboard and will then mark them up a very different conception of Multisim. Now when I try to renumber all reference indicators and annotate back to Multisim, he wants to remove all items first and then make him renumber. It is with the version 10.1.1. Is it possible to edit the log file if it doesn't do the renumbering of part?

  Since this drawing took me 3 days to deliver, she really sucks if I start more can renumber parts.

  I thought that the answer would be no because I think they address this version 11. But I found a way to 'cleansing' of the log file. I created another design, just copied and pasted in the new design. At that time, I had the same exact design, with the same reference indicators and all traces of tact, but none of the nets. I've annotated front of Multisim and introduced all the nets without error. Now I have renumbered all parts and retro-annotation. He wanted to stick all over again but this time that Multisim just said "not supported - add part xxxx" which meant that there nothing done. But she made the reference of all changes of the indicator. Yay. Even if she was in trouble with multi-sectioned parts. He would get a right door, but the rest would be something different with "xx" in the reference indicator. As "Uxx6A". So all I had to do by clicking on the parties and select 'replace the component' and it will show the indicator just with a single gate used and I just had to select the same door.

  So problem solved.

• Change the column header in the log file

  Hi people,

  I have a small program running to collect and record the data in a file.

  The log files to a CSV file correctly, but the column headers show as "Untitled".

  How to set these to something meaningful?

  Had a hunting around, but can't find the settings.

  Any help gratefully received!

  See you soon

  Duncan

  Finally managed to find a Community position covering cela.

  Check out this post fior details:

  https://decibel.NI.com/content/docs/doc-10694

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• I have can´t of the cbs.log file

  Hello world

  It seems that never ends, now it s the file cbs.log that says access denied.

  OK, after you have installed successfully (and finally) sp1 of vista, I ran once more the chkdsk and sfc/verifyonly to verify if everything was ok, as if it was before I ve installed sp1, which was: no no violation of the integrity of the errors found, files damaged, everything seemed just fine for me, but now After installing sp1, the sfc/verifyonly said that Windows found violations of integrity resources Protection and the details are in the cbs.log file, which I was able to access so far, but now, when I try to open it, it says "access denied" - what happened between that made the system go like that and can it be resolved?

  Anyway, desperate, I tried a sfc/scanow in the hope that it would solve this problem, this 'thing', well actually he pointed out that the Protection of Windows resources found and managed to repair damaged files and details could be found at c:\windows\logs\cbs\cbs.log, but as I said before when I try to open this file it says access denied.

  So I rebooted my pc and hope that everything would be ok, given that the sfc/scannow said that the files when repaired, so I thought. Unfortunately, that s not the way it is, after the reboot, I ran sfc/verifyonly, just to confirm that everything was actually ok, well it still signals once Windows Resource Protection found violations of integrity and the details can be found in the cbs.log file.

  Right now my computer seems to work very well, besides that of course, the problem is I m feling completely lost here with this 'thing', it just doesn't feel good and probably it's just me, maybe I m too picky about this stuff, everything must be running ok so I can be at rest with myself, please can someone help me with this , can someone explain me what is happenning, so I can understand it?

  I think that worst of all, at least for me, is not to know what is happening, it s as I have, I would even say obcessive, need to understand not only the solution but most of all the cause of it, the mechanism of it s, I need to understand the process, don't´t you all?

  Pleeaase helps.

  Well be Pedro Borba

  Pedro Borba,
  You must copy the CBS and paste it on your desktop or Documents folder.  Then, open the copied version of the file.  Here is an article which also gives instructions on reading and research the CBS log file.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• in the output log file bit 00's are added, why? (Do not run the attached vi. It disables all devices in your system)

  Hi all

  I've attached a zip file when co-existence.vi is the main file of vi that communicates with a USB device and returns some responses of ATR.

  The answers are stored in a log file. I have attached the log file. In the log file in three places while displaying ATR, get added some unwanted 00's. Please help me how it is and how to remove it?

  Thank you

  Mathan

  [Note: (not to run the attached vi.] It disables all devices in your system)].

  It seems that the duration depends on the value you get out of the dll (dwARTLen). You have wired it as 100, so it seems that the dll simply returns the entry. Maybe you want to check the documentation for the dll on the way to get the actual length.

  A large part of your code is very confusing...

  • You have several subVIs that are essentially the same, but with different names. Not one of these not enough?
  • What is the purpose of the loop IN the adhc.vi? Since you autoindex in a table of a line, it will be executed only once, and the result is the same as if you would remove the loop FOR.
  • Your main VI is extremely repetitive with lots of duplicate code. You have 12 instances of the file name constant, would be enough! Enable.VI is identical to disable.vi, except for a constant of diagram. Much the same constant string ("ATR: ', ' peripheral access card:", etc. "), once again, everyone is enough.

  Here a nice state machine would make all the difference.  You need only about 10% of the current code, eliminating all the rehearsals.

• Files dump debugging and log files to install in the disk cleanup window

  The two points above appear in my disk cleanup window, and I wonder if it is o: k to remove. The first occupies a space of 283 KB and the other 2537 KB. The description of these two files in the disk cleanup window is "files created by Windows.

  I have a second question: I have about 5 GB left as free space on my hard drive of 'C '. If this is considered sufficient, or should I get more? I am a senior retired and only use the computer for basic items.

  I have a computer Dell Dimension 4100 with Service Pack 3 for Windows XP - Home Edition Operating System - desktop, 111 Pentium with 930 MHZ, 20 GB hard drive and 512 MB RAM. The file system is FAT 32.

  Thank you very much for your cooperation and your response.

  "Debug dump files" are copies of the contents of your computer's memory.

  When a program crashes, it will sometimes "dump" all or part of the
  contents of the RAM to a file on your hard drive. The file is useful to
  a technical support person who tries to understand why the program
  crashed. (Most of the tech support people have no idea what to do with a dump
  file.)

  Unless you have been asked to submit a dump for inspection file, feel free
  to get rid of them.

  Setup logs files are "log" installation of a program. If you
  Watch a (they are really just text files - open with Notepad) you will have
  see that they give a blow by blow description of how the program has been
  installed, glorious detail.

  If a program does not properly settled, the Setup log will tell you what that
  was wrong. If you have not had a facility wrong, do not hesitate to ditch
  These files as well.

  On the question of how much free space on the disk is enough... There is no
  standards. 15% of your drive must be empty in order for Windows
  The Defragmenter built into the work. In addition, it is to you.
   
  Your processor is another story. It's not easy to find effective security
  software that will work on a P3. Even if you only use the computer
  for the basic elements, an internet connection is pretty basic for a online
  criminal to find you.

  Another response of the community of Windows XP newsgroups

• find the entries in the log file for sfc /scannnow XP

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows xp?

  That means "[SR]" in the findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt entry in the cmd window to find newspapers?

  What you trying to do?

  If you read this article on Vista (KB 928228) - which does not apply to XP - while the command does is use the fact that "each entrΘe the SFC.exe program in this file has a [SR] tag" to remove entries related to sfc.exe since services component-based' sign (CBS), which contains other entries as well.

  If you ask what the letters SR actually rest in this context, you will have to search you, but I think that documentation on this subject is quite deeply buried at Microsoft.

• imageFORMULA CR-180 check the log file to scan

  Hello

  I work with an imageFORMULA CR-180 check Scanner and when executing a good amount (longer than 100) of the controls, I noticed that the scan control stops and a pop-up window appears on the Analysis ToolPak asked if I would like to replace my log file and start over.

  The software that I use is called "Utility scan for CR-180II" and the log file contains the information of MICR line controls scanned, as well as the date of the analysis, and the location of the file to the images captured from the parser.

  Log file options under "Options-> MICR data parameters.

  What I do, it is by clicking on ' no, I want to overwirte the file ", stop the scan, moving the log of the 'old' file, restart the scanning and backup to a new log file.

  Is there anyway to work around this problem and record continuously in the same log file?

  Is there a memory limit on the scanner?

  This is the Web page of the scanner that I use:

  http://www.USA.Canon.com/Cusa/support/Office/imageformula_scanners/imageformula_cr_180_cr_180ii/imag...

  Hi lendjones!

  Thanks for posting in the Forum! Canon does not provide direct support for imageFORMULA product series, but your dealer will be able to help you! If you do not have a reseller, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide you with dealers who are in your area.

• KB2686509 fails to install, said lack of prerequisite useful and check the log file.

  I am running Windows XP on a Toshiba Satellite computer laptop, Intel PIII, 847 Mhz processor.  I installed SP3.

  Here are the contents of the log file:

  3,695: 17:49:52.498 27/01/2013 (local)
  3,695: c:\fb66e1fe6323f2b745bfc5d1\update\update.exe (version 6.3.13.0)
  3.755: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  3,775: hotfix started with following command line:
  3,775: in function GetReleaseSet, line 1211, RegOpenKeyEx failed with error 0x2
  3,775: in function GetReleaseSet, line 1240, RegOpenKeyEx failed with error 0x2
  3,805: CreateUserInterface: GetProcAddress for DefineInstallCustomUI failed: 0x7f
  3.946: return the value of IsMachineSafe = 0
  3.946: IsMachineSafe return 441092
  3.946: condition in Prereq.IsMachineSafe.Section failed with the fist
  3.946: Check condition for 1 line of prerequisite returned FALSE
  3.956: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  3.966: KB2686509 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  3.996: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  3.996: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  13.830: message displayed to the user: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  13.830: user input: OK
  13.830: Update.exe extended error code = 0xf0f4
  13.830: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Here is the content of the faultykeyboard log file:

  kbdsp.kbd
  kbdsp.kbd
  kbdno.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  Kbdus.kbd
  kbdla.kbd
  Kbdus.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdla.kbd
  kbdycl.kbd

  Thanks for your help!

  I've seen this before. Check this.

  http://social.technet.Microsoft.com/wiki/contents/articles/10876.kb2686509-failure-due-to-upgrade-from-Windows-Me-or-98-to-Windows-XP.aspx