Try to configure the synchronization of FF. I do not receive the confirmation email.

Similar Questions

• entered wrong e-mail address, can not receive order confirmation email, but the log-in/account information are correct.  What can I do?  I printed the order number, it is not listed in my system/products

  I entered the wrong email address to receive my order confirmation mail.  Under manage my account, the product is not listed.  However, under my account the correct email is noticed.  How do I rectify this error and start using the product that I purchased?

  Hi Seward, Jr. gripe.

  Please contact customer service at the corrected details.

  Thank you

  Abhishek

• Try to configure the scan to the network folder, name of user and password is incorrect about JO 8600 N911n

  Hello - I have an Officejet 8600 N911n, product number CN577A. My OS is 64-bit, Win8

  My error message is either your user name or password is incorrect, please go back and correct your user name or password.

  No changes were made because this system has a few months other than downloads.

  I tried using the username provided by the scan to network folder setup with the IPL used for the HP forum and support. Also, I deleted the user name provided by the scan to network configuration folder and created a new pw. They have also objected. What user name and pw should be used?

  Hi Wardell1,

  I appreciate that you try to configure the scan to network folder.

  Where do you get this error message?

  Do you get this error message when you try to access SAP of the printer?

  You get this message on the printer?

• Configure the notification email in XE without 'EM in sql / plsql

  Hi guys,.
  
  I was wondering if anyone knows where configure outgoing by mmon mail server should send alert emails.
  
  My platform is an Oracle XE 10 DB, and I have not implemented the thing of XE (control of the database for XE) Administration web.
  because I installed Apex.
  
  So what I want to know is:
  How Oracle XE are configurable from plsql to send alerts by e-mail, including how to configure the host emaili, email ID etc.
  
  Thank you all and have a good weekend!

  MMON all done we put messages on a queue called ALERT_QUE. That means EM is subscribe to this queue, remove and send an e-mail/page of. The latter is done by EM himself doesn't use only not the packages built in.

  In the absence of 'EM, you would use PL/SQL for:

  (1) managing thresholds using DBMS_SERVER_ALERT
  (2) subscribe to and dequeue with DBMS_AQ
  (3) send emails with UTL_SMTP/UTL_MAIL

  At the moment there is no integrated package to send pages. If you really need to send pages, you will need to communicate with an external service that can send pages or use the API of any paging software, you use either Java stored procs or external procedures written in C
  This is a good amount of code to write, but you will have your own stored procedures that you would be able to reuse against any DB.

  You really need to read the section called "additional APIs to Manage Server-Generated alerts:

  [http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm#i1010615 | http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm#i1010615]

  HTH

  Chris

• Connection problems can not connect I forgot my password I did ' get the confirmation email.

  Cannot connect connection problems I forgot my password I have request a Reset password but I did ' t get the confirmation email.

  Go through the logon process. When you enter your name / password
  should be a link I forgot the password. Site more to have that.

• My podcast is not always appear 2 days after receiving the confirmation email.

  https://iTunes.Apple.com/us/podcast/Church-of-Christ-Northside/id1112198492 Still does not appear in iTunes 2 days after receiving the confirmation email.

  It may take a few days: I have to give it another 48 hours and if it appeared then contact Support. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

• I bought the photo Illustrator and ask the Adobe site plan for individuals with credit cards, but to date I have not received the confirmation email. How can I contact for more information on the good end of the order?

  Hello 11/18/2015 I bought Illustrator photo and ask the Adobe site plan for individuals with credit cards, but to date I have not received the confirmation email. How can I contact for more information on the good end of the order?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• BlackBerry smartphones can not find Outlook user profile when you try to configure the settings of the Organizer

  I want to sync my calendar, Contacts, etc.. I have Microsoft Windows 7 64-Bit with 64-bit Outlook. I just downloaded the latest Blackberry Desktop Manager and also the latest OS for the Storm 9550. When I try to configure my Orhanizer and select Calendar and I get to the screen where there is a drop down menu to select the user's profile, I click the menu drop down and the profile is empty. If I try to click then I get an error. Any help appreciated...

  Hello

  See if the causes/remedies in this KB will apply:

  • KB02362 Microsoft Outlook is not available as a translator when the synchronization options are configured on the BlackBerry Desktop Manager

  Good luck!

• "IR hardware not detected" error when you try to configure the TV signal in Windows XP Media Center 2005 with Service Pack 3

  I have an HP dv6000t. He came with Yuan EC680 ExpressCard analog TV
  Tuner. When I upgraded to Vista, the IR receiver seemed to be detected,
  but after downgrading to XP MCE 2005. XP MCE 2005 was the ORIGINAL OS
  on the system (bought in November 2006). I've updated the drivers for the TWO
  the tuner card AND who do not HAVE the nVidia GeForce Go 7400 video card
  address this problem. Any suggestion on how to solve this problem would be greatly
  appreciated. What HP had try me, including Sofpaq fixes are not
  address my problem. It does not give the error "IR hardware not detected".
  overnight, it correctly detects the signal from my digital cable box.
  The main problem could partly be the we FINALLY converted to digital television
  signal and I always try to use the analog tuner ExpressCard? Once again
  any help is greatly appreciated.

  I found this fix on another site.  We're supposed to plug the IR cable to the TV box at the back of the first port on the remote sensor Windows Media (the ' antenna' of the Windows Media Center remote control) and then to put the tip of the probe of the IR cable to the cable TV box distance near the sensor on the cable box (it can be seen by a light in the glass) and then complete the configuration of the channels in Windows Media.  The problem is, it does not work unless there is also something connected to Port 2 of the medial distance sensor Windows as well (a head set will do).  With the sensor box IR cable company cable plugged into the first port in the back of the remote Windows Media sensor and headphones plugged into Port 2 of the remote sensor, Windows Media, and the end of the probe of the sensor cable box IR cable near the cable box remote sensor box, Window Media channel setup "found" the cable of the IR sensor and allow me to complete the installation.  I could not bind the Windows Media remote sensor with the remote for the cable box, but said that I managed.  I use the remote cable box to change channels and have box IR cable connected on the decoder cable TV and put the cable box IR receiver cable on top of my desk.

• Error when you try to configure the microphone for speech recognition

  I get an error:

  "The wizard could not start. Make sure that your audio is working properly and check your audio configuration Audio devices and its themes Control Panel. "My microphone and speakers are connected and working.  When I go on manage Audio devices, I can see them both and when I speak into the microphone, the green bars.  I tried a clean boot and still get the message.  Also, I get this message when I try to start speech recognition.

  Hello EllieMae,

  Thank you for posting.  It seems that your sound card device drivers could have had an error during installation.  You try to reinstall the device drivers for your sound card to possibly fix the problem.  You should be able to find any updated drivers for you computer to the manufacturer's support Web site.

  Please let me know if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Try to configure the usb connections

  Try to configure usb connections:

  I have the version of VMWare Server 1.0.9 156507 installed on a laptop with Wndows XP with the latest service pack installed.  The guest operating system is Vista.

  I cannot see a drive hard usb attached to the laptop.

  VMWare Server help - setting up a USB Port, says I have to select to configure the port of the USP.  There is NOT point in the list, however.  Also, when I select VM & gt; Removable devices, there is nothing there.

  I think that will all users, that would be very plug-and-play at this point.  This has proved to be a frustrating problem.  Any help with this would be greatly appreciated.

  ... There are no. USB controller in the list article, however.  Also, when I select VM > Removable Devices, there's nothing there.

  You must Add a USB controller to the parameters of the virtual machine.  Shut down the virtual machine.  (Not hang).  Then add a USB controller to the virtual machine.

  Note that only supported Server1 USB1.  There were many reports of devices USB2 works do not correctly with Server1.  For more details, see problems using some devices in a Virtual Machine (774) .  Basically, for these instances, you must either disable the USB2 support in the guest OS or use a USB1 hub to slow the USB device.

• Receive the same message several times, and does not receive any other emails.

  Using Outlook Express, I got the same email, while I can't receive any other emails of revenue due to downtime. I increased the time to 5 minutes.

  The file that retains a number of messages downloaded probably has been corrupted.  Remove the pop3uidl.dbx file (hidden) and see if that fixes the problem.

  Steve

• Lost my product key of Windows 8 and the Confirmation email, how do I find my key

  I bought windows 8 back in October today I had to reinstall windows, but I can't find my product key announcement I seem to have deleted the e-mail confirmation by mistake. Is there anyway I can recover my key of Windows 8?

  I bought windows 8 back in October today I had to reinstall windows, but I can't find my product key announcement I seem to have deleted the e-mail confirmation by mistake. Is there anyway I can recover my key of Windows 8?

  Hello

  Go to the following site.

  Electronic download Support software phone numbers:
  http://support.Microsoft.com/GP/ESD-support-phone-numbers

  Locate and call the phone number for your local area.

  You will need to provide your personal information, such as the email address you used, credit card number, etc. They'll send back the confirmation e-mail.

  When you get the product key, print or copy him and put it somewhere safe.

  Concerning

• I just paid the plan of creative photography Cloud but it is said that Im using the trial version and I have to pay for it, but I received the confirmation email of the payment, what should I do?

  I don't know what to do, I paid the plan, I received the payment confirmation email, but when I opened the app, it says I have to pay for it again, as it did not work, if I have to use the trial version, what do I do?

  Hi Juliana,

  I see an active subscription under your account, and it is to show only enabled on a machine.

  Please confirm if the issue is resolved?

  Kind regards

  Akshay

• ORA-15001 and ORA-15204 when I try to configure the snapshot to controfile name

  Hi all
  
  I create a backup to a new db script.
  
  After registry dthe db in the catalog, I tried a full backup, but otherwise, I read that the snapshot controlfile is under $ORACLE_HOME/dbs in a single node of the rac environment.
  
  I'm trying to change, in order
  
  RMAN > CONFIGURE SNAPSHOT CONTROLFILE NAME to "+ RECO_II01/DBASSET/CONTROLFILE/snapcf_ASSE1.f";
  I get the message:
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command configure at 27/12/2012 12:31:41
  RMAN-03014: implicit recovery catalog Resync failed
  RMAN-03009: resync command failed full to the default channel to the 27/12/2012 12:31:41
  ORA-01580: error creating control file backup +RECO_II01/dbasset/controlfile/snapcf_.f
  ORA-17502: ksfdcre:3 cannot create the +RECO_II01/dbasset/controlfile/snapcf_.f file
  ORA-15001: diskgroup 'RECO_II01' does not exist or is not mounted
  ORA-15204: version 11.2.0.0.0 of the database is not compatible with diskgroup RECO_II01
  
  When I try to go back to the default, I get the same error.
  
  Do you have any suggestions to fix?

  Try with the compatible version database identical to the compatible version of ASM diskgroup.

  This isn't a question of RMAN it's a configuration problem.