Try to divide the two numeric fields and have response in the third field num

Similar Questions

• How to divide the two numeric fields?

  Hello.

  I tried to divide two numeric fields, called A and B and put the result in a hidden field called C. I need the value for an XML export.

  My question is; How is it possible to divide A and B? I don't have a problem in multipling other areas, but trying to divide I get at most / overflow error.

  Best regards

  Mathias

  Hello

  During the distribution, please check that the value of the field as the line is not null or zero first. So the event calculate the hidden field would look something like this:

  if (b.rawValue == null || b.rawValue == 0)
  {
       c.rawValue = "0"; // If c is a numeric field. If it is a text field then you could put a message "division by zero"
  }
  else
  {
       c.rawValue = a.rawValue / b.rawValue;
  }
  

  Hope that helps,

  Niall

• Doesn't have installation of Vista updates. He continues to try set up the third update with 0% completion and then it turns off and start again from the beginning. Keep in the loop... Help! There is no error message.

  As above. He is not in windows more simply the third update installation and then turns off computer and restart new since the beginning. Tried running safe mode but without success

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• have two different computers and have problems recoving from hybernation. Locking the system

  Original title: recovery of hybernation

  I have two different computers MS 7 and have all two issues recoving from hybernation. They lock just straight up (do not accept an entry mouse or keyboard) and requir3e hard re boot. Goes 8 to 10 times a week.

  Hello

  (1) did you of recent changes to the computer before the show?

  (2) is the specific question at the opening of specific applications or programs?

  (3) you get an error message?

  You can perform the following methods and check if it helps.

  Method 1: Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  2 the resolution of the problems of method Performance

  Run the troubleshooter of performance, then check if it helps.

  Check out the link: http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter

  Method3:How to troubleshoot performance problems with sleep, hibernation and resume:

  http://support.Microsoft.com/kb/950686

  Note: The article remains valid for Windows 7 also if it is for Vista.

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 4: update video drivers card

  Check if the video card drivers are up to date. Install the latest video card drivers for Windows 7 on the manufacturer's Web site.

  Tips for solving common driver problems:

   http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  It will be useful.

• Try to install antivirus software, Error 1935 and have fatal entries in Windows Update logs

  I try to install anything to protect my computer and have not been able to get anything to install.  Avast gave me the error side by side.  AVG free gabe me a 1935 error message.  I found this thread and now I am trying to install something else.  My question is what I do if there are FATAL entries in my log from Windows Update?  I have no idea.  I got an error trying to install the patch who thinks that that's how I found myself here.  I have Vista Service Pack 2, 32-bit, had AVG Free before, but it was something weird so I uninstalled, planned resettlement, but it wouldn't work.  Before that, I think that I had Mcafee... it's so I don't remember, but I have Security Scan Plus on my computer so I need to uninstall that?  Any help would be so appreciated!

  Separated from here

  Hi MelanieSartain,

  You can follow the steps described in the connection with the similar question.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-code-1935/ac31b6bc-5e82-4884-ab31-0965593444c0

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-1935an-error-occurred-during-the/7105ee7e-AB45-4bd2-b5db-a3e9002f7f9e

• is there a way to create a single video file of two separate video and have their output to two separate projectors?

  I started using the first less than two months ago and my tech video background is rather limited . I'm doing an art project where I am projecting two different projections on a large wall that are designed to be in harmony and interact with each other.   I intend to use two laptops, one for each projector.  This is a possible problem.  The docents Gallery in this gallery of the University will have to turn everything on every morning, having to click on both computers at the same time to synchronize the images play together perfectly.  That simple I'd like to think, I know year 19 former students who are the docents sometimes fail to grasp what is obvious.  Is there a way to take two project files and create a single file that could play for two projectors from a laptop outside?  As a split screen monitors?  That way they click on a button. I don't know if it's possible, it can't be.  I just thought to deal with this problem as possible before that happens.   

  Has ny advice would be greatly appreciated.

  You can create a sequence on the front which is double width. For example, 1280 x 720 (720 p) becomes 2560 x 720, which is TWO 720 p side by side videos in a clip. For reading, you may be able to implement the graphics card settings to do it for you, or - get a Matrox DualHead2Go box. You must set the graphics card in your computer to the display size double width, such as 2560 x 720, and the single output of the computer goes in the DH2G unit, which separates the entry into two outputs independent of 1280 x 720.

  There are many models available, depending on whether you are working analog or digital graphics card. There is a ton of information available, including tools for configuration and testers to run on your system. It is important to seek and choose carefully, to make sure that the connections are compatible and that map display of your computer (and Matrox unit) will support both the specific resolution you are looking for.

  Matrox DualHead2Go Digital SE | Multiple monitors for laptop computers

  Thank you

  Jeff Pulera

  Safe Harbor computers

  www.sharbor.com

• Error 1721 that try to uninstall the third-party driver.

  Original title: error 1721 uninstall windows xp.

  When the UN-install a pilot third. I get an error 1721, to paraphrase: lack of control dphost.

  Hi JoeParrott,

  1. are you able to install or uninstall other software?

  2. What is the full error message that you receive?

  3. which driver you uninstall?

  You can follow this link & check if the problem persists:

  1721 error may appear when you try to remove programs by using Add / Remove programs in Windows XP

  Hope the helps of information.

• I have Windows 7, and began checking updates two days ago and have let continue to check. It is always checked. There has been no update in a month.

  Are not only there, no Windows, my Microsoft Security Essentials protection update is unable to find updates more.  I was told that the two go hand in hand.  What is the problem?

  Windows 7 update problems? First read this.

  :)

• I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar.

  I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar. I managed to go into the live account and change the password, so I know that the connection details are correct. I can access my hotmail account.

  I signed up for skydrive two days ago and have loaded the documents that I cannot now reach!

  original title: skydrive connection problem

  Forum on SkyDrive here:

  http://windowslivehelp.com/product.aspx?ProductID=6

• C00D0FF4 error message when you try to share the media in the Player Windows Media Player 11 and Vista Home Premium SP2 64-bit

  Hello
  I can't share my media using WMP 11.  When I try to do, opens a window of options asking how I want to share media files (with xbox, other users, etc.), and I select the options and click OK.  Then, when I return in the sharing of multimedia files to see if the media are indeed shared, a window opens informing me "Media sharing has been disabled because a required Windows setting or component has been changed. For any additional help, click Help on the Web. When I click Web help, the error code above, with a few troubshooting not.  You must ensure that Windows Media Player Network Sharing Service is turned on.  However, when I get to the list of Services, WMP Network Sharing is not.  It is also a step to confirm the ownership of a registry subkey.  When I try to access the subkey HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences\HME\ [security ID], however, there is no security ID subkey.  Instead of that, by virtue of the MCH, there is a list of "default (name), REG_SZ (type) and not the value (data)".

  Suggestions about how to fix this would be greatly appreciated.  Would it be useful to simply uninstall WMP and start over?  If so, how to do that?  I saw an obvious way to do it.

  Thanks a lot for your suggestions.

  Bill Cowan

  Hi Bill Cowan,.

  Thank you for using Microsoft answers.

  Follow the instructions in the link below that may help you resolve the issue.

  Method 1:

  Windows Media Player Error Message help

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D0FF4&ContextId=233&OriginalID=C00D0FF4

  Method 2:

  Let us try to disable antivirus and check whether the problem is resolved.
  Reactivate the antivirus after checking the issue.
   
  Let us try to disable the third-party firewall and see if the problem is resolved.
  Re-enable the firewall after checking the issue.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Response to a change in a numeric field

  Hello

  I have a question about the digital field. I have the following problem. I have two numeric fields. I am writing a value in a field. Now, a calcualtion gives me a new value with the old value. I would like to print the new value in the second field of nummeric.

  So my problem is this.

  The main program starts when I press a start button. So what I would like to have is the new value printed without pressing the Start button. Basically, I would like to see the solution before starting the program. I enter a value and see the solution, now the solution is not correct, so I change the value and see the new solution. This solution is correct and I start the program. It's save calculation time. Can I change the value and at the same time, according to me, if it is correct to start with the value. (example: first of all the ground 1000 Hz, second field (T = 1/f) 0.01 s).

  I hope you understand what I mean and can someone help me?

  Best regards

  This happens install a callback function in numerical order and the EVENT_COMMIT event management (assuming that the control is left in HOT mode as the default value).

  From the probgram, whatever that means, will be by the callback of a command START button function

• Dividing the two calculated fields

  Hi people,
  I am able to divide two calculated fields viz (# opportunities created / # opportunities Won) but I want to display "0.00" when the numerator and the denominator are '0 '.
  The calculation that I use is
  
  1.0 * (COUNT (DISTINCT BOX WHEN opportunity. "Created Date" "< = CURRENT_DATE AND opportunity. '" Created Date' > = TIMESTAMPADD (SQL_TSI_DAY-30, CURRENT_DATE) THEN opportunity. ("' Opportunity ID ' NULL OTHER END) / COUNT (DISTINCT BOX WHEN opportunity. "Stage of current sales' = ' Closed / Won" AND opportunity.' " Modified by time"< = CURRENT_DATE AND opportunity. "" Modified by DateTime "> = TIMESTAMPADD (SQL_TSI_DAY-30, CURRENT_DATE) THEN opportunity. ((' ' END of NULL OTHER opportunity ID '))
  
  Any suggestions?
  
  
  Thank you and best regards,
  Amit Kul

  Put a case when statement around it:
  When case (DIVISIONS. VAL1/DIVISIONS. Val2) is null then 0 DIVISIONS on the other. VAL1/DIVISIONS. End Val2

  concerning
  John
  http://obiee101.blogspot.com/

• Need to concatenate the put date in the form field and the numeric field

  Hello

  I have a date field and a 4-digit numeric field in my form. I want to concatenate these fields in a new field in the following format: "YYYYMMDD [4-digit numeric field]."

  For example

  Date: June 4, 2015

  Number: 1234

  Concatenated field: 201506041234

  When I try to concatenate the value of date, I get the string value is entered instead of the actual date (e.g. "4 June").

  Thank you.

  OK, the script might like:

  Get the values of field as strings

  var sDate = getField("date1").valueAsString;

  Var Nums = getField("number1").valueAsString;

  Convert string to date in a date object

  Kai var = util.scand ("mm/dd/yyyy", sDate);

  Concatenate number and the date strings

  var sDateNum = util.printd ("YYYYMMDD", letter) + nes;

• Calculation of the numeric fields radio button and checkbox-based response

  I am to change a form that was created by someone else.  I added checkboxes and radio buttons based on the need to form. I would like for the amount of check calculate automatically based on the selection of a radio button.  I've implemented some numeric fields to play with adding the amounts and placed them in the field 'Amount to check', but I can't seem to calculate.  Once I have to calculate correctly, I need to know how to automatically enter a number in the appropriate digital field based on the option button or check box selected.  Here is a picture of what I've put up.  Help, please!  I read all the forums, watched the videos and tried everything.  I'm so frustrated.

  

  Don't know if I have the layout if correct me if Im wrong. I assume you have a radio button group on the top line for the first 3 check boxes and boxes (when the user selects one) for the following 2 lines (where the user can select independently of the other 3 above) with a final calculation at the end to check the amount field.

  You can either place the code on each change of each checkbox/radio button event to recalculate or just do it on the final checksum field. I tried putting a calculate on the last field to check the quantity, and it seems to do what it takes.

  Try this in the case of calculating the amount of check field

  var membershipAmount = 0;
  if ( (RadioButtonList.rawValue == "2") || (RadioButtonList.rawValue == "3") )
  {
      membershipAmount = 35;
  }
  
  if (CheckBox1.rawValue == "1" )
  {
      membershipAmount += 15;
  }
  
  if (CheckBox2.rawValue == "1" )
  {
      var txtAmount = TextField3.rawValue;
      var amt = 0;
      if ( (txtAmount != null ) && (! isNaN(txtAmount) ) )
      {
          amt = parseFloat(txtAmount);
      }
  
      membershipAmount += amt;
  }
  
  this.rawValue = membershipAmount;
  

• I called Amazon to try to recover the serial number of my old iPod classic two weeks ago, and they gave me a kind of account; They pronounce it account 'seen - It '.

  I called Amazon to try to recover the serial number of my old iPod classic two weeks ago, and they gave me a kind of account; They pronounce it account 'seen - It '. I don't have to ask how, because I thought I knew, but I was wrong. Would what type of account be? And how it's spelled? The name of the account is a tiny s followed a 7-digit number. (Of course I will not type the numbers.)

  I would go to a forum for Amazon, because they can be better equipped to answer a question on their system. If synchronize you the device with iTunes, the number can be there in the backup section.  Find the serial number of your Apple - Apple Support product