Try to install a patch for Captivate 5.0.0.596 update to 5.0.3.631.  Where is this patch?

Similar Questions

• Try to install the patch KB943729 and get this error. __

  Try to install the patch KB943729 and get this error.

  The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.

  Any help with this error.

  I've always found the icon on my Start button that indicates that an update is ready to be loaded and I have to restart my computer

  Open Internet Explore (only) to http://support.microsoft.com/kb/971058 & re-run the difficulty in AGGRESSIVE mode. [1]

  Reboot once more & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I download and try to install Adobe Installer for creative cloud, I get error Code 43. Setup could not copy a critical file. Please try again.

  When I download and try to install Adobe Installer for creative cloud, I get error Code 43. Setup could not copy a critical file. Please try again.

  It's on Windows 7 Ultimate SP1. I can not install one of the adobe applications.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

  NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I try to download my paid for 13 elements upgrade. When I click on the "Download" button, I get this message: 413 header length too large

  I try to download my paid for 13 elements upgrade. When I click on the "Download" button, I get this message: 413 header length too large.  Help?

  You can download it by using the direct download link, which I predicted.

  Download Photoshop Elements products | 10, 11, 12, 13

  During installation, when prompted enter the serial number and to proceed with the installation.

  If you had purchased the update serial number.

  First, enter the serial number Photoshop elements 13.

  Then it will ask for the previous qualifying version number.

  In the drop-down list, select Photoshop elements 12 and enter the serial number Photoshop elements 12

• I want to install Ps creative cloud. Adobe asked me to begin to "CreativeCloudSet - Up.exe". Where is this file?

  I want to install Ps creative cloud. Adobe asked me to begin to "CreativeCloudSet - Up.exe". Where is this file?

  No problem, it would be possible to capture and share a screenshot of what you see?

• When I try to install a program (for financial data graphics) I get a message that the wizard to uninstall shield is in use and turn it off before you try again.message # 432, according to me, or perhaps of 423

  If I try to install programs by downloading fromm the internt (lately a program to draw and make calculations on financial data) I do not pass. The error message is the following:

  Uninstall Shield Wizard is in use

  Turn the power off before trying again

  error # 423 or 432

  Hi GeorgeMcWilliam,

  1. Did you the latest changes on the computer?
  2. What program are you trying to install on the computer?
  3. You are able to install other programs on the computer?

  Method 1

  See the link below and run the fixit tool available, check if it helps.

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Pavilion: try to install my printer for laptop HP with Windows 8

  Hello

  I am trying to install my printer HP photosmart c4180 to my laptop HP Pavillion (Windows 8 not sure if 32 or 64 bit).  I downloaded the software but when I try to install my printer on my laptop via a USB cable, I get an error troubleshooting.  I tried to fix this in the solutions offered by HP but can't make it work.

  Help, please!

  Jackie

  Have managed to install the printer.

• whenever I try to install my software for my sound card I get a msg "the software you are installing has not passed windows logo testing" I know it's compatible windows.

  This product whenever I try to install the software.
  recently I reinstalled my windows xp operating system.
  is there a file that is damaged?

  There is probably not a bad thing.  Some device manufacturers submit their products to testing by the Windows Logo program , but the products work very well.

• Try to install the driver for my Motorola Droid

  How, I discovered if I use 32-bit or 64-bit so that I could install the driver for my Motorola Droid?

  Monday, October 4, 2010 20:52:20 + 0000, Samcay wrote:

  How, I discovered if I use 32-bit or 64-bit so that I could install the driver for my Motorola Droid?

  Hold down the Windows key, then press Pause. Break. The screen, you get
  by the practice will tell you.

  Ken Blake (MS-MVP)

• Try to install the output for bridge CC module but there is no file extensions for Windows

  I am trying to install the output module for the CC bridge on a Windows system, but there is not an extensions folder in my folder of bridges CC. I've seen several discussions on this issue for Mac, but nothing on a PC. Suggestions I could use to remedy this situation? -Thanks!

  To install it, please download the package such as listed in the below mentioned link and follow the installation instructions.

  http://helpx.Adobe.com/bridge/KB/install-output-module-bridge-cc.html

  Make sure that you have the most recent version of the bridge CC (6.0.1) installed.

  Please follow it mentioned below as follows:

  1. Copy the folder Adobe Output Module (not the folder AOM_Package_ [OS]) in the folder Extensions of bridge CC in the correct location as shown:
  • 64-bit Windows:

  Go to C:\Program Files (x 86) \Common Files\Adobe\Bridge CC Extensions

  • 32-bit Windows:

  Go to C:\Program Files\Common Files\Adobe\Bridge CC Extensions

  2. copy the file AdobeOutputModule.workspace in the folder of workspaces under the bridge CC Extensions (such location noted in step 1) folder.

  Let me know if it helps.

  Kind regards

  Ashutosh

• SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

  Original title: CD/DVD drives do not work after upgrade from XP to Vista

  I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

  Hi krt2,

  In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

  You can try to uninstall and reinstall the driver for the device to solve this problem.

  Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer.

  Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, read the following article and check if that helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The Windows Installer does not work. Try to install the drivers for the HP laptop.

  Original title: win installer

  In my victory 8 on Setup window does not work and my laptop is hp 1000-1040 core i 3. and I need all the drivers for my computer hp 1000-1040 core i3 laptop. years me please I wait your answer me...

  If you do not already see this:

  http://WWW8.HP.com/us/en/support-drivers.html and follow the Instructions and download and install all the drivers/software for windows 8. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum

  "When we try to take anything by itself, we find that he hitched to everything else in the universe."  -John Muir

• Tecra 9100: Try to install updadet driver for card his Yamaha AC - XG

  Hi all

  I got a Tecra 9100 and like many others I had problems after installing SP2.

  I tried to install the sound card with the driver downloaded from the toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

  but I get a windows pop saying that the file yacxg.sys is missing.
  Once the installation is complete and the sound card is not installed.

  Is there anyone who can help me?

  Thank you
  Joazinho

  The fact is that the driver listed in the FAQ from Toshiba is for SP1 and NOT for SP2

  I think you should google a bit and should look for if you find an audio driver that is compatible with the Service Pack 2 update

  Yamaha already provides the fixed driver.

  yacxg.sys 6.13.10.2152 with software synthesizer

  yacxgc.sys 6.13.10.3152 free software synthesizer

• try to install audio Beats for Win7 6 t - 1100 CTO

  I received a laptop of 6 t - 1100 CTO and fallen into a real SSD and installed Win7 x 64 on it. Everything works without problem with appropriate drivers (or at least the drivers who work) except the audio is terrible. It works, but it's really tin - y and the sub does not at all anything. I tried to download a few beats different drivers from different sources and I get an error "system does not meet the minimum requirements. I contacted HP support and basically they said that this model is specially designed for Win8 - implying that there are physical limitations of some sort. I could download a 3rd party eq control system, but if the system does not use the sub, there is only so much I can do with the "regular" speakers I would like to get the beats software - or at least to get the system to recognize and use the subwoofer. Any help would be certainly appreciated!

  Hello:

  I think that you must install the driver IDT W8.

  See this thread.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/beats-audio-envy-17t-J000-downgraded-Windows-7/m-p/3064433#M152215