Try to install a program that requires to be run as an administrator.

Similar Questions

• is it ok to remove the most recent version of the redistributable file in VC ++ in order to install a program that requires an older version?

  I have a file in VC ++ 2010 version Re distributable 10.0.40219. One of the programs will install vcredist_86.exe and he is unable to do so because I have a newer file. What is the solution?

  Have you tried installing via a right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view, navigate to the mentioned location of Temp or to see all the files in there...

  As has been said it is not uncommon to have several versions of VC ++ installed.  If you want you can uninstall them and reinstall them as should be.

• When you try to install a program, Windows Installer starts to run then silently disappears displayed error free.

  Several microsoft people tried to help fix, but no results, IF someone REALLY knows how to solve this problem, please contact me at * address email is removed from the privacy *. I tried to install Office Student 2010 and when this happened, I have Windows xp, service pack 3 is already installed, reinstalled the well said, microsoft Installer

  Hello
   
   
  1 did you changes to the computer recently?
  2 are you able to install other applications successfully?

  Method 1.
  Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver

  Method 2.
  Install Windows Istaller 4.5 and check.
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Method 3.
  You can also try the steps listed in the article below and check.

  http://support.Microsoft.com/kb/2438651

   
  Method 4.
  For more information I would also recommend to check the Event Viewer logs.
  http://support.Microsoft.com/kb/308427
   
  I hope this helps.

• When I try to install the program on uniblue power I get an error message that the mia.lib was not found.

  When I try to install any programs, I receive the error message that the mia.lib was not found. What should I do to correct this?

  Hello
  Yes, it seems that this program is not running Windows XP. If the requirements for this program is Windows Vista or Windows 7, then the upgrade may solve your problem.

  I hope this helps. Just reply to the results.

• I am trying to install an extension that requires FF 4.0. I downloaded 4.0 yet the extentsion says I still 3.6.16 when you try to install.

  I've uninstalled and reinstalled FF several times. When I try to install the extension (which requires FF 4.0), I get a pop up that says I'm still using an older version of FF and asks me if I want to upgrade. When I click on "About Firefox", it says that I have 4.0. In February, I downloaded Beta FF I understand, could be a problem. I also read that you must manually remove the beta files that I made. I did a search of system to see if all the Beta files exist and none were found. I want to just make sure that FF 4.0 is installed and be able to install the extension FGS.

  Sorry for the error in the link. Looks like spelling like that older that I've always had with "Web Sites" instead of "Web Sites" is more work. I've corrected it.

  • Sites Internet says that Firefox is obsolete or incompatible, even if it's the latest version

• I started receiving messages that Windows Installer service is not properly installed when I try to install a program.

  installation of Windows in windows xp service

  I started receiving messages that Windows Installer service is not properly installed when I try to install a program.
  Running XP Home edition.
  I tried to install Windows Installation Service 4.5 but that doesn't seem to make a difference
  I also tried unsubscribing/re-enrollment msiexec.exe and that doesn't seem to make a difference.

  I tried to reinstall my HP scanjet 4890 software but complains the installation Windows installation service.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso3

• Whenever I try to install a program I get a message that a program being installed. Which includes all updates to Windows. How can I fix this problem?

  Whenever I try to install a program I get a message that a program being installed.  Which includes all updates to Windows.  How can I fix this problem?

  Hello
  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• whenever I try to download a program that I tells me that windows can't open this file and I can not install nething or what did I do or what I need to know

  whenever I try to download a program that I tells me that windows can't open this file and I can not install nething or what did I do or what I need to know

  Hello
   
  1. What you're trying to download?
  2. What program you try to open when this occurs?
  3. What happens when you try to install the program?
  ReferThe link and follow the steps.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• I have no volume and also States that is not designed to run on windows or it contains an error. Told me to try to install the program with the help of original installation.

  c:\windows\winsxs\x86_microsoft. VC80.crt_... and so on is not designed to run on windows or it contains an error.  Try to install the program using original install.

  Hello

   
  1. have you installed the driver of sound card on the computer?
  2 is not available for a particular program or windows sound?
   
  Step 1: If you have not installed the sound card driver, then please visit the system manufacturer's Web site and download the driver audio compatible Vista and install it.
   
  For more information on "Hunting the drivers" visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware
   
  Step 2: If you have installed the driver for sound card and there is no sound on the computer, try the following steps.
  1 visit the following link and click on "Run now" to diagnose and fix audio playback problems: http://support.microsoft.com/gp/no_sound
  2. If the problem persists, visit the system manufacturer's Web site and download the driver audio compatible Vista and install it.
   
  Check this "Tips to solve common sound problems": http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I can't install a program that can solve my problem with Firefox.

  Windows 7 won't allow Firefox to install a program that can solve the problem. Whenever I click on the Firefox icon, the message says to allow a program to install. I click Yes, but it never gets installed.

  original title: program firefox problem

  Hello

  1. are you able to install any other programs?
  2. don't you make changes to the computer before the show?
  3. What is the accurate and complete error message you get?

  Method 1
  I suggest to perform the clean boot and then try to install Firefox. When you perform the clean boot make sure you disable all antivirus and firewall programs.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 2
  I suggest you try the steps from the following link:

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651#reso3

  If the problem is only with the installation of Firefox, then I suggest you to contact Firefox support.
  http://support.Mozilla.org/en-us/forums

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to install a program I get error: "0045A3BB."

  I got a new laptop, new computer for me has windows Vista.  I try to install a program, directory of CAMPING, Woodall, I get an error message 0045A3BB.  I have not had any problems with XP.  What should I do?

  Hello

  See if that helps you.

  !. Right-click on the setup.exe > and then select run as administrator to install it.

  2. ask the manufacturer to program if it is Vista Compatible.

  We can not help you with that that Microsoft no longer has the link Vista Compatibility Center available.

  3. If the program is not Compatible Vista, install in XP Compatibility Mode

  "Using Windows 7 or Vista Compatibility Mode.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  See you soon.

• try to install a program Runtime Error 52

  original title: Runtime Error 52

  There is a program that is given by my company for installation on our own pc/laptop. While the program works fine on pc/laptop to the all the other colleagues, but not mine. every time when I tried to install the program the error message 52 DURATION pop up and prevenet me install this program. Please let me know the reason and solution to fix this thanks a lot

  Hi Guan,

  1. what program are you trying to install?

  2. how you try to install the program?

  Method 1:

  If you have any program of present old version installed on the system, then you can try to uninstall the same and check.

  Uninstall a program

  Method 2:

  You can also perform a clean boot and see if you can install the program.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, you can refer to step 7 in the article mentioned above to put the computer to normal startup mode.

• I try to install a program, but get a message came

  I try to install a program, but get a message pop up - windows that install Service could not be accessed. This can occur if the Windows Installer is not installed properly. Contact your Supprt staff for help - can someone help me please. I don't know if this is part of the same problem but when I tried to install a game I got a message - 1607 unable to install InstallShield Scripting Runtime thank - you

  I try to install a program, but get a message pop up - windows that install Service could not be accessed. This can occur if the Windows Installer is not installed properly. Contact your Supprt staff for help - can someone help me please. I don't know if this is part of the same problem but when I tried to install a game I got a message - 1607 unable to install InstallShield Scripting Runtime thank - you

  RE: Windows Installer Service could not be accessed
  Try this tutorial

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

  I can't answer the last question about the error code 1607.

• When I try to install a program, I get the message the administrator won't let me do

  Administrator problems

  When I try to install a program, I get the message the administrator won't let me do. It's my computer. I am the administrator and no one else uses my computer. How to go beyond that and install the program, I need?            Allienne

  Hello

  Try right click on the setup.exe from the program - then run as administrator