Try to install adobe reader & I continue to get this message... Error 1606. Could access the location %APPDATA%\ network what do I do?

Similar Questions

• printer won't install not Error 1606 could access the location %APPDATA%\ network

  I get the error as well.  I can not install any adobe updates, no HP, microsoft and I can't install a printer that I had once installed.  I reinstalled the o/s about a month ago and have tried to add the programs that I ran once here with no problem, but nothing will be installed and the error message.

  Hello irry,.

  Thanks for posting in the Microsoft answers Forum.  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Here are the steps to fix it.

  1. click on start, run, type regedit in the Open box, and then click OK.

  2. look for the following registry key:

  3 remove the entries that show the path that is listed in the error message.

  Let us know if this solves your problem.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I try to install Smart Notebook and I get a error message saying "could access the location %APPDATA%\ network." How can I fix?

  Thank you

  Check the registry entries referenced in these articles:

  http://support.Microsoft.com/kb/886549

  http://support.Microsoft.com/kb/2258121

• I get a message saying could access the location %APPDATA%\ network when I try to uninstall itunes

  I tried to restart my computer to see if it would reset and I also did a system restore... nothing works

  Hi amyanderson,

  Method 1

  I suggest that you try to uninstall QuickTime first and then try to uninstall iTunes, check that it works.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2

  If the previous step fails, then see the items below and try the steps to uninstall iTunes from the computer and check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  http://support.Apple.com/kb/HT1925

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

   

  Method 3

  If the previous step fails then reinstall iTunes on the computer and try to uninstall it.

  http://www.Apple.com/iTunes/download/

• Try to update Java, Adobe Reader and now RIM Blackberry Desktop Manager, Error 1606 could not access network location.

  I got this error for a few months. Initially, I came across it trying to update Java, Adobe Reader and now RIM Blackberry Desktop Manager.

  The specific error is "Error 1606 could access the network location:.", with the colon and the dot at the end. Therefore, it is difficult to know exactly what registry entry, it's.

  I tried to change various registry keys and using a number of files of Microsoft "Fix it for me", but the error remains.

  Can someone help me please identify the location of the network that weird symbols ":." to refer and possible to put an end to this problem once and for all?
  I'd be happy to re - try fix if proposed as a possible solution.

  Thanks in advance.

  Hello

  1. What microsoft fix it did you try?
  2. don't you make changes on the computer before the show?

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  The steps to correct this problem involve editing the Windows registry.

  WARNING: this method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the
  Register incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.
  Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
  a. Click Start and typeregedit in the search box start and press to enter.
  b. find the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  c. remove the entries that show the path that is listed in the error message.

  You can also consult the steps in knowledge base article provided assistance:
  http://support.Microsoft.com/kb/886549

• When I try to install anything on my pc I get this message "Invalid access to memory location".

  Invalid access to memory location

  When I try to install anything on my pc I get this message "Invalid access to memory location".

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Then test your hard drive

  Find your drives brand and model:
  Speccy - computer/system information in detail
  (More detailed look at your memory and CPU)
  OS, CPU, RAM, card, graphics, hard drive, optical drive
  Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Error 1606.Could access the network location. Problem installing driver scanner.

  I tried to install the drivers for a more BearPaw 2448TA scanner in the edition of Windows 7 Home Premium (64-bit).

  Recently, a message appeared in the center of the Action to say that a new driver of Mustek systems was available, I downloaded and tried to install.

  A messagebox is displayed during the installation with the following message
  "Error 1606.Could not access network location------." and the installation will fail.

  Help would be greatly appreciated.

  Hi HenryGib121,

  Thank you for using the Microsoft Answers forums.
   
  I suggest you to download and install the driver from the link below.
  http://www.mustek.com/Mustek/support.php
   
  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  If the problem persists try the steps and check them off below.

  You can create a system restore before trying the steps below in order to be on the safer side.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Here are the steps to fix it.
  1. click on start, run, type regedit in the Open box, and then click OK.
  2. look for the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  3 remove the entries that show the path that is listed in the error message.

  If the steps above did not resolve your problem, then you can try to create a new user account and check.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://support.Microsoft.com/kb/811151 (this article is for xp, but can also be used for vista and windows 7)

  You can also contact the mustek support team for help.
  http://www.mustek.com.tw/support/
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• I try to install my software bought, but I get this message when I try to install

  I just bought the Production Premium for my Macbook Pro, but I get this message, I tried to restart my system and tried to install the software several times without success. Any ideas?

  Exit code: 7 - Summary - 1 fatal Error (s), 2 error (s), 3 warnings WARNING: DW031: payload: Adobe XMP panels CS5 3.0.0.0 {6A2E619B-E4AC-433B-A648-D458CE543A96} has been updated and has been selected for repair. The {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} patch Adobe XMP panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 are uninstalled now. WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The {A189C479-C7CD-4E08-8CCF-D999B68C0C71} patch camera profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 are uninstalled now. WARNING: DW031: payload: Photoshop Camera Raw 6.0.0.0 {37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} has been updated and has been selected for repair. The {FD58D99B-9927-4226-8E00-959A4F76BD89} patch Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 are uninstalled now. ERROR: DW020: found payload conflicts and mistakes: ERROR: DW020:-Adobe Flash CS5.5 depends on Flash Player must be installed. FATAL: DW020: conflicts were found in the selected payloads. Stop the installation. -------------------------------------------------------------------------------------

  I had to uninstall adobe stuff (software free trial) and after that, it worked fine. Thank you very much

• I have Illustrator CS3 that when I try to install on a new computer, I get a message error that says "Installer database is corrupt"

  Is there a reason why I can't install current CS3 on a new computer?

  CT7409,

  Please see this link:

  Error «...» The Installer database is corrupt... "When you install Adobe Creative Suite 3 products

  Kind regards

  Guinot

• Every time I try to install Adobe Reader, interrupted installation and my PC tells me that I already have a newer version installed - which is correct!

  Whenever I try to install Adobe Reader, the installation has dropped and my PC tells me that I already have a newer version installed

  -that's not right!

  How to get and longer instqllqtion - for now I can not read PDF documents?

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• message "your purchase could not be completed" when you try to install Adobe Reader from the Windows store

  I try to install Adobe Reader Touch to my Surface installed Pro Windows 8.1 Microsoft Windows store.  I get the following message is displayed:

  "Your purchase could not be executed.

  Something has happened and it's impossible to make your purchase.  "Error code: 0 x 080070057.

  Only, this seems to be a problem with Adobe Reader Touch.  I was able to install applications from other vendors and Adobe (for example, Photoshop Express to the elements).  So it doesn't seem to be a problem with my Adobe account, or a problem with Windows Store system.

  Anyone have this problem?  All solutions?

  THX.

  Hi jjquinn75

  I recommend contacting Microsoft about this error message as it is returned by the windows store program.

  Furthermore, I you recommend to download the installer for Adobe reader offline using this link (Adobe - Adobe Acrobat Reader DC Distribution ) and then try to install on your device pro surface.

  Kind regards

  Rahul

• When I try to install Adobe reader, I type my password, but it was rejected.

  When I try to install Adobe reader, I type my password, but it was rejected. Why?

  Entered the password of your system?

• Hello!  I tried several times to download a trial version of Adobe Acrobat Pro, but I get this message, "installation of Adobe met an unexpected failure.  Please try again.  If it persists, please contact Adobe. »

  Hello!  I tried several times to download a trial version of Adobe Acrobat Pro, but I get this message, "installation of Adobe met an unexpected failure.  Please try again.  If it persists, please contact Adobe. »

  uninstall all versions of acrobat and reader.

  If win, clean it by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer

  replace.

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?

• Error 1606.Could access location %APPDATA%\ network When uninstalling and installing Java for vista

  I get "Error 1606.Could access location %APPDATA%\ network." "When I try unistalling Java (TM) 6 Update 5 and Java (TM) 6 Update 20 and when I try to download the latest version of java (25) Ive tried a lot to get rid of the problem, but nothing I tried seemed to help."

  Windows Vista 64-bit.

  Have you tried:

  1. http://support.Microsoft.com/kb/2258121
  2. http://support.Microsoft.com/kb/886549
  3. Create a new administrator account and try to install using this account.