try to install El Capitan

Similar Questions

• Try to install El Capitan, the kernel panic

  Hello!

  I tried two different methods for the installation of El Capitan with the same result.

  1. passage of Mountain Lion.

  2. fresh install on a new SSD with a bootable SD card.

  I don't know how to copy the text for the kernel panic, so I took a picture of what it looks like. They are slightly different.
  The only problem experienced with the computer (MBP9.2, 13 ", 2.9 GHz I7) is the:

  "To avoid damaging your computer, device drawing too much power has been disabled. Other devices have can also be disabled. When you unplug the device too much drawing power, your other USB devices will be activated again. »

  That appears from time to time. AHT says "no problems found". SMC and NVRAM has been reset.

  Have managed to restore the computer to Lion of mountain for the moment, I prefer to upgrade.

  

  

  If any USB devices are connected, please disconnect them and try again.

• I try to install el capitan, but my mac pro needs a SYSTEM of CODE ID FOR UNLOCK

  IS A 6 DIGITS CODE, I CAN´T INSTALL THIS PLEASE I NEED HELP

  Where did you downloaded El Capitan of?  I downloaded El Capitan via the App Store, which you're supposed to do, and I didn't enter in any 'system ID Code' to unlock or start the download/installation.

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to

  Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to download several times and in different places. That is wrong. Does´NT CS5 run on El Capitan? Or what else? Thank you.

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• I have an older Mac that I just installed El Capitan on. When I try to run CS4, I get a license error. Error 150:30. I downloaded recovery license 11.6.1 and it fell in my terminal. It asks for my admin password, but allow me to type.

  I have an older Mac that I just installed El Capitan on. When I try to run CS4, I get a license error. Error 150:30. I downloaded recovery license 11.6.1 and it fell in my terminal. It asks for my admin password, but allow me to type.

  Error 150:30 fix https://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html license is the only link I have, but waiting for CS4 on El Capitan may sound unrealistic

• At the time of install el capitan?

  How long does to install El Capitan on a MacBook Pro 2011 with 8G, from Yosemite? The notice said there 20 hours to go and then he spends 1 day and a half, etc. What is a normal view? It has already been downloaded for 1 1/2 hours and seems to be getting nowhere on the progress bar. And is it okay to do other things on the computer during the installation, or better left alone?

  Try to cancel and restart the download.  Should resume where it left off.  A reboot is also of course.  If it gets stuck on waiting, make sure that you are connected to the App Store (maybe try disconnecting and back) then click menu Store and look for unfinished downloads.  You can also open the activity monitor and kill the process storeagent or storedownloadd which can be hung.  Try the Option by clicking on the buttons there are options to cancel, etc. so that you can restart the download.

• I can't install El Capitan, even if my computer has the requirements of law

  Hi guys,.

  We recently bought a second hand apple machine itself. All good, but I have problems during the software update latest El Capitan, I need to install external software.

  I see that all of the requirements, but I feel like I'm right on something really obvious.

  My laptop:

  MacBook Air (mid-2012)

  4 GB memory

  Software OS X 10.8.5

  12.7 GB of free storage

  Requirements on the Web site:

  MacBook Air (late 2008 or newer)

  min. 2 GB memory

  OS X 10.6.8 (or newer)

  free storage of 8.8 GM min.

  Coming to app store/download page via the "software update" button under the symbol apple in the header.

  It downloads and then I get the message "El Capitan is currently not supported. THX."when I try to install.

  Thank you in advance!

  What, exactly, have you downloaded? Is this a app install OS X El Capitan 6.2 GB which is located in your Applications folder? Is it still there? Try the following:

  HD recovery start

  Restart the computer and after the chime hold the Command and R keys until the Menu Utility is displayed.

  Repair

  When the Utility Menu appears, select disk utility and click on the continue button. Disk utility charges and select layouts withdrawal (usually Macintosh HD) the list entry side.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait for the process to finish, and then quit disk utility and re-enter the Utility Menu. Select restart from the Apple menu.

  Now, try Setup again.

• IMac, re - install El Capitan-wants to load on external drive

  Late 2009 Imac. 16 RAM, HD 1 T.  El Capitan.

  Use slow this AM-reboot.  This opens to the Apple screen and the cursor moves right - about 3/4 and slows down.  It stops at 90%.  After 30 minutes, it move at the end and then the Imac white switch.  ??

  Did the same thing in safe mode.

  Try the Options mode now.  Thought I'd reinstall El Captan.  I have attached external USB which is bootable.  Options want to install El Captan to emphasise the main HD.

  Went BACK - and currently running disk utility... but he is stuck on the LOADING of DISK with the spinning wheel.  Been there a while.

  I made a Clone carbon copy about 4 days ago and have also two BU of Time Machine.

  I would like to charge El-Capitan-CLEAN.

  Suggestions?

  Your message is not clear. You try to install the internal hard disk, or you try to install on an external hard drive?

• Impossible to install El Capitan on new SSD

  Trying to install El Capitan on using the method of USB drive on my mid 2012 13 "macbook pro (9.2) and I can't seem to make it work at all. Using a SSD 240 GB PNY CS1311. When it starts to install El Capitan I get about a minute before it stops and says "OS X can not be installed on your computer. Could not complete copy. I tried several times without a bit of luck, and from the start of my laptop for the first time with the SSD, I erased, then formatted with OS X Extended (journaled) and GUID, score card, so I know that it is properly formatted.

  I managed to install OSX on my old HARD drive using the same USB so I don't really know if that is the question.

  All the tips are greatly appreciated.

  I try to get Internet (OPTION-COMMAND-R) and try to install the original OSX your MBP came with.  This at least will give you a functional MBP.  Retry installation El Capitan.

  You will need a strong Internet connection.

  Ciao.

• Cannot install El Capitan, or restore Lion

  

  I thought I would do a clean install of El Capitan today. So I started the drive in recovery mode, deleted, created an encrypted partition journaled + and begun the process to install OSX. It starts to download the installer from El Capitan, but after a while (always in the same place) hangs and does nothing. The Setup log says:

  http://postimg.org/image/jp3khc9jr/full/

  OK, lets try to install the original through command + Option + R, the installation of the internet called. It ends, restart, then after a bit of a DO NOT ENTER of loading sign shows that something was wrong. Any ideas what could be the problem?

  It's a Macbook Air mid 2012.

  Perhaps a network problem. If please connect to another network and try again. One option is to go to the Apple Store and use their network.

• I installed El Capitan.  Now the e-mail program crashes.  Suggestions?

  I installed El Capitan.  Now the e-mail program crashes.  Suggestions?

  Try this:

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Download OS X El Capitan 10.11.3 Combo Update and reinstall.

• After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  Did you try a reset of the SCM and hope that the problem is solved?

  • Reset the management system (SCM) controller on your Mac - Apple Support

  What does the computer when started in safe mode?

  • Try safe mode if your Mac does not end commissioning - Apple Support

  You have a copy of backup clone of the previous OS X and its applications?

  This is usually a preventive measure to be still able to use the Mac

  an upgrade path does not work as expected, so you have alternative.

  Or you can return to the configuration already in place, in offline mode.

  In any case...

  Good luck & happy computing!

• 100 M175nw MFP Color LaserJet: Try to install the HP software, msg stuck like "Check 'HP LaserJet SW OSX Mavericks'..." »

  I am trying to install the complete package HP for my page printer (http://support.hp.com/us-en/drivers/selfservice/hp-laserjet-pro-100-color-mfp-m175/4208157/model/420...).  Successfully, I downloaded the software and double-clicked.  The installation program launches and said verification ' HP LaserJet SW OSX Mavericks '... and he's here.  The progress bar is not updated; It is just there for ever.

  I have the printer physically connected via the USB port.  I would like to configure to work via WiFi, and I want to be able to use the features of the scanner, as I have in the past through Windows.

  Hi @Loroki,

  Thank you for joining the HP Forums!

  I appreciate that you try to install your printer HP LaserJet 100 Color MFP M175nw on Mac OS X 10.11 El Capitan. And I'm happy to help you!

  To confirm that the hardware of the printer is functional, you are able to print a configuration report? Print a Configuration report.

  In the meantime, please, try the procedure described in this guide, printer not found during Network Driver Setup (OS X)and let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide helps!

• stuck in a loop... try to install Photoshop CS6 independent Mac

  I disabled my Photoshop autonomous 6 on my Mac before upgrading to the new MacOS Sierra in case I had problems and will have to start from scratch.

  First of all, I went to the Adobe site and verified that it was what I need to do and he says...

  Disable an application

  What is disabling?

  Disabling disconnects a request for a valid user license. Once disabled, you can reactivate at any time, if you choose.

  «Unfortunately, it wasn't the correct information (Adobe should fix that!).»

  So, I tried Adobe online help (nothing there), then cat Adobe where I was told initially that I need to uninstall Photoshop CS6 completely and then I could install with my serial number. I did as I was told, but now when I try to install from my Photoshop CS6 Installer, I get a circular message...

  

  By clicking on the link 'Get Adobe Support Advisor' tells me that this software no longer exists?

  I have Photoshop CS6 stand-alone for my Mac. It appears on my Adobe account page with the serial number. I just can not install or use it?

  The more things, I am told to do so by Adobe, the worse things become?

  I wrote another forum post last week, but after 60 + views and no replies, he disappeared?

  I have Adobe has sent and received a notice that I have called in a few days (it's been 7 days no appeal)?

  And when I try to ask for support, I am told by the site that the telephone support does not exist for this product.

  Does anyone have any idea what I need to do?

  At this point I already paid Adobe more than $1,600 for Photoshop (with my updates since the PS3 5),

  I will NOT be joining Creative cloud! Been there, done that a year before. Which cost me another $360 for absolutely nothing! Live and learn?

  To disable... Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

  That said... CS6 is about 4 years old and many people report that it is NOT compatible with the all new Sierra of Mac (or Mac El Capitan)