try to install the update for windows Vista service pack 2.

Similar Questions

• I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

  I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

  What are error codes: 800F081F & dt000

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this update?

  3. are you able to install other updates successfully?

  4. What is the brand and model of the computer?

  5 all the troubleshooting steps you have done?

  Try these steps and let me know the status.

  Method 1.

  I suggest you follow the steps in this article.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Method 2.

  Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3.

  Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

  Method 4.

  The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

  The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

  For reference:

  Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

  I hope this helps.

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

  Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

  them, but the update continues to fail.  Any help would be appreciated.

  Hello

  Perform the steps from the link below and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Hope this information helps.

• Update for Windows Vista Service Pack 1 offerred repeatedly; have installed 4 times.

  Original title: vista service pack 1

  just reinstalled vista and sp1 only installs sound always on windows updates and I install it says his successful but while he appears again ive done four times now, and it is said in the history of the update I have four time but I know that its not install as its quick access

  I have will have to sp2 as well but can't get that until I get sp1

  Hi Joy,.

  Let us work together to solve this problem.

  During the installation of Windows Vista SP1, this problem occurs when a third-party application holds open a file or locks a file that the Service Pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. I suggest you temporarily uninstall any antivirus software and check if you are able to install the service pack. Please do not forget to reactivate once the process is complete.

  Method 1: Alternatively, you can reset Windows Update components.

  How to reset the Windows Update components?

  Method 2: I ask that you download and run the system update readiness tool and check if you are able to install the service pack.

  The system update tool

  Registry WARNING: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  Method 3: I ask you to install Windows Vista Service Pack 1 Standalone Installer, in clean boot.

  Step 1: download Windows Vista SP1 from the link below depending on the Type of system:

  Windows Vista Service Pack 1 for Windows Vista 32-bit (size: 544,3 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 873,0 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&displaylang=en

  Step 2: Save the file on the computer and install it in the boot. Please refer to these steps to learn how to:

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

   

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.

  Please get back to us with the State of the question.

• My computer will not install the update for SQL server service pack 3 (970892), why?

  Whenever I try to install the update I get the message not was restored.

  Try this forum:

  The SQL Server installation & set program at level
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/ TaurArian [MVP] 2005-2010 - Update Services

• I cancelled the update of Windows Vista Service Pack 2 (KB948465) and now I can't get it to download?

  I have started to download Windows Vista Service Pack 2 (KB948465) but cancelled it.. and now I want to download and update, but it does not display on my update list... any help?

  You can download the Vista SP2 standalone installer:

  • Download the SP2 32-bit from the Download Center

  • Download the SP2 64-bit from the Download Center

  To see if you have Windows 32 or 64-bit:

  1 open the system by clicking the Start button, right-click computer, and then clicking Properties.

  2. in respect of the system, you can view the type of system, it will say 32 or 64 bits.

• Cannot install the update for Windows Vista (KB957321), said does not apply

  I was in the middle of the installation of the updates on my computer dell laptop after installing a new hard drive and the os. (windows vista professional)

  I cancelled while it was downloading I was going to start the update process later and in my history of editing I show being cancelled, but not installed successfully. I try to install this update and it is said that this update does not apply to my system. do I need this update? I ran every update that I had to run vista and it has been previously download but

  then I ran SP2 and all updates. Who will be included in updates?

  Hello

  It comes to the installation of vista operating system instance

  link below has information on KB957321

  http://support.Microsoft.com/kb/957321

  for writer windows update for your information system please repost the link below in the windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Cannot download and install the update for Windows Vista (KB2481109) security

  Up-to-date security for Windows Vista (KB2481109) and update for Windows Mail Junk E-mail Filter [March 2011] (KB905866) ideas?

  Error codes displayed are:

  Code 8E5E0147

  Code 8E5E03FB

  But without any answers of MS

  Anyone able to help?

  Thank you very much

  Hello

  you are this posting in the wrong forum

  It comes to the installation of vista operating system instance

  try this or repost

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

• Updates for Windows Vista service pack 2 (64-bit) will not download.

  I have tried to download and install the monthly updates for Vista service pack 2 (64-bit) since 12 August 2016 and he helped run it for hours on end, but failed to get them to download.  I also had problems getting my Essentials Microsoft update regularly since then as well.  My computer has continued to run as if it strives to move things, but nothing is really happening.  Can anyone help please, it is extremely frustrating that are constant stops of Explorer Windows that many know.

  Manually install KB3177725.

  http://Wu.krelay.de/en/

  The value of the automatic updates to 'never check updates' and restart Windows before installation manual.

  Best regards, VZ

• Update for Windows Vista Service Pack 1

  I get the following error message after trying to install Vista Service Pack 1
  !! 0xc07a001d! 37406/94861 (Registry\Machine\Components\DerivedData...)

  I can't start my machine in normal or safe mode - have to resort to repair disk.

  What is the problem and how can I solve it?

  Try to perform the scan the elevated command prompt sfc and check: http://vistasupport.mvps.org/system_file_checker.htm

  : @pache ;)

• try to install the update for Windows XP (KB2646524) security and get the error Code: 0 x 80070003. I tried all the troubleshooting I can find but no luck, any ideas?

  XP Home addition running and by train to download a pack of compatibility for excellent 2002. It seems that I need the security update first.

  Hello

  I suggest you try the steps from the link below and check if it helps.

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services: http://support.microsoft.com/kb/910336

  For your reference: You cannot install some programs or updates. http://support.Microsoft.com/kb/822798/

  Hope this information is useful.

• Update for Windows Vista Service Pack 2 for x 64 systems (KB948465) _

  Whenever I try to update Vista Svc Pack2, she says that it has completed successfully. When restarting the laptop he spends 1 out of 3 in which the 1 configuration ends then start the 2nd and gets 1%, it restarts again and comes back with an error message. I have to shut down the computer and then the computer performs a check to boot. Before you try to download the Pack of Svc 2, I have no questions, now my taskbar in the taskbar volume goes down by itself, it does not play any disk, cannot download attachments (adobe), among other things. According to me, trying to download Service Pack 2, it has corrupted systems as if it has a virus. Please can someone help me with this, it's very annoying.

  Please answer questions following diagnosis by number in your next reply (no need to quote this post):

  1. is Vista SP1 is installed?

  2. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  3A give Norton or McAfee application already installed on the computer?

  4. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  ===========================================

  Free unlimited installation and compatibility support is available for the Windows Vista SP2 problems. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 and select the appropriate category (e.g., download problem, installation problem;) Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft