Try to install the update on Vista 64-bit and get error code 80072F78

Similar Questions

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• Cannot install the update from Microsoft SEcurity Essentials KB2691905 get error the component you are trying to use is on a resource unavailable network

  JOriginal title: can't locate epi.msi

  When you try to install the update of security essentials KB2691905 I get an error message saying "the component you are trying to use is on a network unavailable resource."  «.. . or enter a different path to the folder containing the installation package 'epi.msi' "

  Hello

  Method 1: Install the latest version of the installer

  See the following site:

  Windows install 4.5 Redistributable

  http://www.microsoft.com/en-us/download/details.aspx?id=8483.

   

  Method 2: Clean boot

  See the following site:

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

• Error 80070652 occur when you try to install the update for microsoft works 9 and 2007 microsoft office suite Service Pack 2 - why?

  CONTINUE TO RECEIVE AN ERROR 80070652 CODE WHEN I TRY TO INSTALL THE UPDATES FROM THE WINDOW FOR MICROSOFT

  WORKS 9 AND 2007 MICROSOFT OFFICE SUITE SERVICE PACK 2 - WHY?

  Hi SonjaThibodeaux,

  ·         You are able to install all other updates without any problems?

  ·         Remember to make changes to the computer, after which the issue started?

  ·         What are the KB numbers associated with the updates?

  Try to reset Windows updated components and check if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• Try to install the update Cumulative security for IE8 and Vista but eveytime it fails with WindowsUpdate_80070005 and I can't find a reference on how to overcome this error

  No other information.

  Hi Martin,

  How long have you encountered this problem?

  Error code 0 x 80070005 is also described as access denied (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  Users have solved similar issue by following the steps indicated by the TaurArian, please see the link below for the steps
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8007005/67e5374f-7356-4542-a3b1-b1e910aea325

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Cannot install the update - Windows 7 64 bit (windows installer error - program might not work)

  I am running Windows 7 Home Premium 64-bit. I'm unable to install updates for iTunes (last successful update was my PC itunes 12.2.2.25 64 bit). The error message I get when you try to run the downloaded exe file from apple is: 'there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ". Please indicate what the problem is and how I can fix. I am not able to backup or synchronize my devices (for example iphone 6 sec) over to my PC as it is said that iTunes must be 12.3 or higher. Thank you - Bryan

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• try to use Windows Update with Windows Mobile 6.1 gets error code 80072ee7

  First of all, I don't know why it is not a category to select Windows Mobile as the "main product" this issue is about.  Microsoft should really put in place the best support for their mobile products.

  That being said, here's my problem.  On my AT & T Tilt, which operates under Windows Mobile 6.1 Professional, I can very well browse the web, use applications that require the transmission of data, connect to a wireless network in the region and can synchronize with my PC Vista very well... but try to use Windows Update to the operating system is up to date always fails each time with the same error code, no matter what I try to do.

  I saw something on the fixing of the same code error on Windows 7, but I don't think that it applies as Mobile 6.1 does not have a "Drivers" folder in the Windows system folder.  Solution Windows 7 involved by changing the "Hosts" file, but I can't seem to find where such a file may be under Mobile 6.1, or if Windows Mobile uses even a Hosts file at all.

  Anyone have any ideas on how to solve this problem?  Or am I pretty much just stuck, until I can afford to get one of the new 6.5 ridiculously expensive smartphones?

  Hi wbdes,

  Since it is a support forum for Windows Vista and 7 consumption, these BONES are for the laptop computer desk/computer system.  You should try to repost your question in the forum specific to Windows Phone for best results.

  http://social.Microsoft.com/forums/en-us/WindowsMobile/threads

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install the update on vista 32 bit fax drivers

  I downloaded a driver of bridge e for fax Toshiba Studio3500c to connect it with my laptop Toshiba Satellite Pro L300 and unzipped the box but their doesn't seem to be any key of the option to install it.

  Does anyone know how these 20 files can be downloaded & installed because windows do not react with the demo because they stopped support for Vista & XP now? the demo page there is no stay

  Hi Wayne,
  Please follow the steps under update manually the driversof this article and check if that helps.

  Thank you.

• 57F error code I have Vista and I am running MS Office 2002 for students. When I try to install the updates, I get this error code. Until a few months ago I had no problem with the installation of updates for MS Office 2002

  Ideas:

  • Programs that you have problems with MS OFFICE 2002
  • 57 E error messages
  • Recent changes made to your computer NO
  • What you have already tried to fix the problem error code search

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi halecky6,

  Welcome to the Microsoft answers site!

  (a) update you are trying to install? (It would be better, if you can provide the number of KB)

  (b) are the other updates related to Windows from installing on your computer?

  I suggest you try the following steps:

  Step 1: Disable the software security and then try to install the update

  Note: Activate security software once the test is completed.

  Step 2: Download and install the update in the clean boot state

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  After starting the computer, download the update manually and try to install it.

  http://www.Microsoft.com/downloads/en/default.aspx

   

  Note: Return the computer to normal - reset the computer to start as usual (follow step 7 in the link) once everything is done.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  You can also post your question on the office community, please visit the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I try to install the update update of security for SQL 2005 service pake 3. I have vista 2 this update applies to my computer I get an error code ff or c0000005

  I try to install the update update of security for SQL 2005 service pake 3.  I have vista 2 this update applies to my computer I get an error code ff or c0000005

  1. navigate to the following registry key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Setup)

  2. find the "Summary" (REG_DWORD), and then change its decimal value from 1 to 0

  3. restart the computer

  4. install the same update.  It should work.

• Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems) in Vista

  Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff.  Tried several times but nothing helped.  I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.

  Hello

  I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also say that you reset Windows update components and check if this may help.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• 800b0100 error when you try to install the update KB968816

  Well, I get this error (800 b 0100) whenever I try to install the update KB968816. I have downloaded and run the system update tool. He has not fixed it.

  Is there a solution for this error?
  My plug for my laptop is:

  HP Pavilion DV5 1002nr
  3 GB memory
  232 GB of available disk space

  Thank you, Nick Hanson

  A program on your computer is perhaps interfere with the installation of KB968816.

  Try manually downloading and installation of (your anti virus or security software may interfere)

  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB968816&displaylang=en&sType=s_basic

  Try to install after a clean boot.

  support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  TaurArian [MVP] 2005-2011 - Update Services

• I try to install the update for Microsoft Works 8 (KB977304) security, but he has been unable to download. He said it failed because error code 646

  I try to install the update for Microsoft Works 8 (KB977304) security, but he has been unable to download. He said it failed because error code 646. If anyone can help me with this that would be great.

  Hello

  Do you work on your computer? Otherwise the control panel - Windows Updates - right
  Click on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error 80071 has 30 when you try to install the updates.

  What does it mean error code a 80071, 30 when you try to install the updates

  Hello

  1. are you able to install the updates as soon as possible?

  2 has there been recent changes made on the computer before the show?

  I suggest you to please follow the provided steps and update us with the results.

   

  Method 1: Perform the clean boot and try to install the updates.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Method 2: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  Method 3: How to reset Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  Method 4: Scan of the file system (CFS) auditor.

  Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  You can also check the updates failed.

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  I hope that helps!

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all