Try to put in place the HP ENVY on MacBook Air

Similar Questions

• Try to put in place the PIXMA MX922 on a student network. Help!

  My PIXMA MX922 does not place on my student network. My network is the kind you will first need to get on the student network, then download software so you can connect. I need to print wireless and I can't do and I already have stuff to print. Anyone out there that can help, I appreciate it and get it quick print! I'm on a MacBook Yosemite running.

  Well, I think that after pouring on the manual online I found a solution for wireless printing. Bluetooth. I ordered a dongle used on Amazon for $10 - a Canon suggested, the D - Link DBT - 120 Bluetooth USB Adapter Wireless. There is absolutely no way printers can work on most college networks. The reason being that they are public networks and basically anyone can use the printer from anywhere. Therefore, the only other option is a local printing solution. But instead of a cord that need three people to connect whenever they need to print, optional Bluetooth works great and it is easy to put in place.

• try to put in place the new to iphone on itunes backup with restoration done the previous phone

  Try to restore again SE with a backup that I did earlier today with 5, whenever I connect to itunes SE he asks me if I want to set up as a new phone or restore from a backup.  I choose the backup that I did earlier today and go through the whole process.  Some of my apps restore and no voice message.  ITunes recognizes the phone as having been backed up and continues to ask me how I want to configure the phone.  I did the whole process 3 times.  I have a real phone, restarted itunes... What can I do else?

  I suggest you all first set your phone as new, and after it is operational connecting to iTunes and then restore the backup. Make sure you have iTunes 12.3.3 on your computer, they are required for the iPhone OS.

• Try to put in place the new homegroup

  OK, so I know that this subject has been here before, but can anyone PLEASE help me with some easy to follow the steps to completely remove/delete a House Group created on a device that is no longer want it on. I left the homegroup. I stopped and disabled services. I deleted the files in the PeerNetworking folder. I tried what others have said, but when I try to create a homegroup on a new device, I get only the possibility of joining a "ghost". It's ridiculous that there's not a straight line option remove. Any help would be great. And please, do not send me a link to another article. I lost so much time to read and nothing did. I can't be the only one frustrated by this. Thanks in advance.

  -Greg

  Built-in diagnostic tool "Homegroup Troubleshooter" will be completely empty and reset all of the stack, so you can set it up in costs.

• Try to put in place the new hs from 10g to SQL Server 200 X

  I followed the instructions described here:
  http://download-West.Oracle.com/docs/CD/B10501_01/server.920/a96544/admin.htm#169356
  
  trying to set up an ODBC server connection internal Oracle 10 g 2 on Windows Server 2003 to an external (IE 3 rd-party organized) SQL Server. The ODBC withdrew very well to the test of connection, etc. I'm trying to set up a database connection using heterogeneous services but get this error when I try to validate the link:
  

  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Unable to retrieve test of NETWORK/NCR message 65535
  ORA-02063: preceding 2 lines from TUMS

  I started by changing the existing inithsodbc.ora file and rename it to inithsTUMS.ora. Here is the content:

  # This is a sample agent init file that contains the HS parameters that are
  # needed for an ODBC Agent. 
  
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = TUMS
  HS_FDS_TRACE_LEVEL = OFF

  'TUMS' is the name of the ODBC data source.
  
  Then, I modified the listener.ora file. Here it is:

  # listener.ora Network Configuration File: E:\oracle\10gr2\DB\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  LISTENER_TS10G1 =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
        (ADDRESS = (PROTOCOL = TCP)(HOST = ts10g1)(PORT = 1521)(IP = FIRST))
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.168.201)(PORT = 1521)(IP = FIRST))
      )
    )
  
  SID_LIST_LISTENER_TS10G1 =
    (SID_LIST =
      (SID_DESC =
        (SID_NAME = PLSExtProc)
        (ORACLE_HOME = E:\oracle\ora10gr2\ASM)
        (PROGRAM = extproc)
      )
      (SID_DESC =
        (GLOBAL_DBNAME = +ASM)
        (SID_NAME = +ASM)
        (ORACLE_HOME = E:\oracle\ora10gr2\ASM)
      )
      (SID_DESC =
        (SID_NAME = TS1)
        (GLOBAL_DBNAME = TS)
        (ORACLE_HOME = E:\oracle\ora10gr2\DB)
      )
    )
  
  LISTENERTUMS =
   (ADDRESS_LIST=
        (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
        (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
  
  SID_LIST_LISTENERTUMS=
    (SID_LIST=
        (SID_DESC=
           (SID_NAME=TUMS)
           (ORACLE_HOME=E:\oracle\10gr2\DB)
           (PROGRAM=hsodbc)
         )
        )

  After having done that, I tried to start the listener. He started, and I got an OK on TNSPING.
  TNSNAMES.ora
  

  # tnsnames.ora Network Configuration File: E:\oracle\10gr2\ASM\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      )
      (CONNECT_DATA =
        (SID = PLSExtProc)
        (PRESENTATION = RO)
      )
    )
  
  TS =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.168.201)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = TS)
      )
    )
  
  LISTENERS_TS =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.168.201)(PORT = 1521))
  
  
  TS1 =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.168.201)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = TS)(UR=A)
        (INSTANCE_NAME = TS1)
      )
    )
  
  +ASM =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.168.201)(PORT = 1521))
      (CONNECT_DATA =
        (SERVICE_NAME = +ASM)
      )
    )
  
  ASM =
     (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.168.201)(PORT = 1521))
        (CONNECT_DATA =
           (SERVER = DEDICATED)
           (SID = +ASM)
           (UR=A)
        )
     )
  
  TUMS=
     (DESCRIPTION=
        (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.168.201)(PORT=1522))
        (CONNECT_DATA = (SID=TUMS))
        (HS = OK)
     )

  Can someone point me to a potential source of problem?

  2019 means the database link (in your case named TUMS) is not found. Perhaps you gave up or the user cannot access.
  Try to recreate: create database tums link to connect to... identified by... using 'TUMS ';

• I downloaded Lightroom 6 today (single license), but when I try to put in place, it is blocked with the comment "product installed only on a 64-bit system.

  I downloaded Lightroom 6 today (single license), but when I try to put in place, it is blocked with the comment "product installed only on a 64-bit system.

  Hi Fred,.

  6 Lightroom requires Mac OS X 10.8 superior, or a 64-bit version of Windows 7, 8 or 8.1. See the system requirements for Photoshop Lightroom for Mac OS and Windows

  It could be useful!

  Kind regards

  Shelly

• I bought items at Best Buy December 14, 24. I'm trying to use it on a MacBook Pro OSx 10.10.5 (Yosemite). While I try to put in place, I could get the serial number, but when I type in Adobe says that it cannot validate it. That is what it is?

  I bought items at Best Buy December 14, 24. I'm trying to use it on a MacBook Pro OSx 10.10.5 (Yosemite). While I try to put in place, I could get the serial number, but when I type in Adobe says that it cannot validate it. That is what it is?

  you have a number of redemption?  If so, https://redeem.licenses.adobe.com/getserial

  If your redemption number is reported as invalid, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

  If you have a serial number, install your software using this serial number.

• I need to put in place the security of the laptop running finance and don't know the programs and the finest details of it.

  Security

  I need to put in place the security of the laptop running finance and don't know the programs and the finest details of it. I need to buy, sell and subscribe. I need to use programs such as paypal also.

  You have antivirus installed? If this isn't the case, I would install Microsoft Security Essentials (MSE) for you antivirus protection.

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Windows 7 is really quite safe as is and does not need a lot of work to ensure.  There are a few FixIt who can put in place and ensure that it is set using the recommended security settings.

  http://support.Microsoft.com/mats/windows_security_diagnostic/en-us

  http://support.Microsoft.com/mats/Malware_Prevention/en-us

  http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

  Just run the fix it is and install MSE and you should be sure resonably.

• I want to put my photoshop cs5 on my new MacBook air.  How do I do that without a hard drive?

  I want to put my photoshop cs5 on my new MacBook air.  How I do that without disk?

  @@

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

• USB WI - FI put in place the question

  I bought a unit of wi - fi usb Conect my Wii to the internet through a wireless network. After reading the instalation instructions, I have more questions than ansures. I hope someone can help. is first of all the States; Open tool EDUP wireless LAN configuration to select the function for this adapter wireless Station or Access Point. I'm not shure I need? The next question is if I need to put in place as a poit of access that they tell me to go into the configuration advaced to the Wireless Network Connection and select the services that are running on my network internet, useres who has access. With the list displayed that I have no idea what kind of security issues that I've created posibly. Please, any help is aprisheated.

  Hello I Ness. I had the same problem myself, so I did some research and decided to write a tutorial about it on my site.

  By chance I have tutorial on Wii connection options, which can be found via the links below:

  http://chafflube.WordPress.com/2010/10/19/how-to-connect-your-Wii-to-the-Internet-via-Wi-Fi/

  http://chafflube.WordPress.com/2010/10/19/how-to-connect-your-Wii-to-the-Internet-via-LAN-USB/

  http://chafflube.WordPress.com/2010/10/19/how-to-connect-your-Wii-to-the-Internet-through-your-PC/

  Good luck with your Wii connection! One of these tutorials is sure to meet your needs.

• BEFSR41: Try to put in place more than one xbox

  My roommate and I are trying to get his xbox 360 put in place on our router. I already have my xbox put in place, but we're having trouble connecting with his. does anyone have advice on how we can configure connection settings?

  Nevermind, I think I've discovered what the problem was.

• BlackBerry Smartphones that are struggling to put in place the personal e-mail

  Hi, I hope someone can help me with a problem I encounter.

  My mother bought a curve 8520 on a case of talk with Orange today and while the thing most seem to work ok, we're fighting get set up personal e-mail. I followed the tutorials and instructions, but when I go to the option of setting up, the only option there is to put in place a company email, not the personal.

  I've been Googling autour and it seems to be a pretty common thing. Is it just a case to call Orange and ask them to do something at their end? If so what exactly is it they do?

  Also requests for MSN and ebay I downloaded also do not work, I guess it's down to the same problem?

  Thanks in advance for any help.

  Hi and welcome to the Forums!

  To use the Push RIM owner messaging capability, you must have an adequate data of your carrier plan. Carriers host BIS BB users. In general, BIS is not available through the generic data plans, or plans for Pay as You Go. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have a compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), then you will have personal email added to the e-mail Setup Wizard.

  Good luck!

• UCM, how to put in place the security group according to PS file conversion?

  Hello, everyone.
  My PS need files converted to PDF Format, some do not. So, I created the Group 1 and group 2 in the security group. Installed Gs8.54 PDFc elements and.
  
  The current result (situation) is all the files in the format PS are converted to PDF, but I would like that the ps in Group 1 format files can be converted by selecting the Distiller, the ps, in Group 2 format files can not be converted by selecting PassThru.
  
  Who can tell me how to create server content filters and configure the conversion based on security groups?
  
  Thank you very much!
  
  Moreover, my native language is not English. So please use simple English as possible, you can. Thank you!

  Hello

  The best way to get this done requirement is to use the component SelectivelyRefineandIndex. With this component, you can create the conditions and put it in the resource file for the component such that we can have only materials that are archived to Sec Grp 1 sent to the refinery and those not belonging is not it will not be sent.
  How can also create conditions for FullText index summary or not depends on not all the conditions that we put in the resource file for this component.

  I think you should be able to get enough with this component requirement.

  Run the most details:

  http://www.Oracle.com/technology/products/content-management/UCM/samples/selectivelyrefineandindex-20080515-5.zip

  Just go in the Readme with the component and you will be able to go with this component.

  Hope this helps

  Thank you
  Srinath

• We have a macbook air family.  I've implemented and have admin status and have put in place the other members of the family as users.  However if the unit is turned off, other users cannot connect without me logging in first.

  MacBook Air (13 inch, early 2015)

  10.10.5 Yosemite

  Intel Core i7 2.2 GHz

  4 GB 1600 MHz DDR3\

  Intel HD Graphics 6000 1536 MB

  We have a macbook air family.  I have set up on the purchase and created accounts for family members, but if the unit is turned off, they are all unable to access the boot until I connect and select their code.  If I do this, what they see on the splash screen is my ID.  Of course, I do not share my password with anyone, so it becomes a problem when I'm out of the House.  Please can you help me?

  Do you have system preferences > users and groups > Login Options set up like that?  You should.

  

• I poured the juice on my macbook air

  So I poured the juice on my macbook there was not that much and I spilled juice on it before, but this time was different cos he really turned off that it self but anyway I panicked and I started to panic and I shook it and then I found online that you have to leave it on the keyboard side down and I did that for a bit and then I turned it on and it really works but then it shut down again once I gave it a little and then I switched back on it and it turned on again and I managed to put my password and he began loading but it stopped again. I tried to put it on the charger sometimes the charger light comes on for a bit and then turns off, but most of the time it is not even turn on at all. It was 18 hours as it happened and I thought I'd try to trigger the SMS but I don't know if it is possible that if I shake it the juice would spread. Please help me.

  When the liquid comes in contact with the computer, you run the risk of the liquid made his way to the logic board. Once the logic board to get even a little wet, liquid will conduct electricity and short on parts of the Board as power is applied (start, restart, load, etc.)

  It would be wise for you to have the MacBook evaluated to an Apple store or Apple authorized service provider.