Try to reformat the hard drive

Similar Questions

• try to reformat the hard drive and load Vista Home Basic Edition with a disk of vista premium

  I'm trying to help out a friend because they are in a deadlock and their computer has some kind of virus. If im trying to reformat and reload Vista Home Basic on it. I have only a vista Home premium upgrade disk from walmart. If I use the product key for vista basic system, it'll work with the disc in vista Home premium? the computer came with it already load on and im trying to save their money so I don't want to make them have to get the acer recovery disks.

  You cannot configure a recovery Partition; He is photographed in the factory during the production of the computer/laptop.

  You should be able to use say you have.

  Use the disc and see if it works!

  Mick Murphy - Microsoft partner

• Can't reformat the hard drive

  Hello I do not know much about computers.  I'm trying to find a way to reformat the hard drive on my son computer for a clean installation of XP Pro.  Initially, XP Pro SP1 has been installed on my IBM Thinkpad.  I have automatic updates must occur on the computer so over time, the service pack has been upgraded to SP3.  The corruption of the computer does not restore system, internet access and several programs running on the device.  When I try to format the hard disk with my XP Pro SP1 disk fails because the system is currently running SP3.  I tried to uninstall SP3, but the system does not.
  What do other options I have order of the reformat the system drive.
   
  Any advice would be greatly appreciated.
   

  Hi Rrmay,

  Thanks for posting. If you try to reinstall XP you can put your OS drive on your computer, or use the OEM recovery media to reinstall XP.

  PERFORMING ONE OF THE FOLLOWING STEPS WILL ERASE ALL DATA IN CUSTODY: PLEASE MAKE SURE THAT YOU HAVE A BACKUP BEFORE CONTINUING.

  The OEM recovery media format the computer and automatically return to the plant as if it was when you first it lit. If you have XP software at retail, you can do the following to format and reinstall.

  Method 1: Perform a clean install of Windows XP, a new installation is to remove all data from your hard disk by repartitioning and reformatting your hard disk and reinstall the operating system and programs empty (clean) hard disk. For more information about important things to consider before you partition and format your hard disk and how to partition and format your hard disk by using the Windows XP Setup program, click on the number below to view the article in the Microsoft Knowledge Base:

  313348 (http://support.microsoft.com/kb/313348/) how to partition and format a hard disk in Windows XP

  To perform a new installation of Windows XP, follow these steps:

  1. Back up all important information before you perform a new installation of Windows XP. Save the backup to an external location, such as a CD or external hard drive.
  2. Start your computer from the Windows XP CD. To do this, insert the Windows XP CD into your CD or DVD and then reboot your computer.

     Note To boot from the Windows XP CD, your computer BIOS settings must be configured to do this.

  3. When you see the message "Press any key to boot from CD", press any key to start the computer from the Windows XP CD.
  4. In the Welcome to Setup screen, press ENTER to start Windows XP Setup.
  5. Read the Microsoft software license agreement, and then press F8.
  6. Follow the instructions on the screen to select and format a partition where you want to install Windows XP.
  7. Follow the instructions on the screen to complete the installation of Windows XP.

  I hope this helps! Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• I had to do a system restore on my PC, which reformats the hard drive and he returned to factory State, and I lost all of my emails from OE and contacts. No way to get them back?

  My computer crashed and the system recovery was the only option.  I know this reformats the hard drive and actually returned the PC to factory State, but I cannot now access all of my old emails and contacts on OE.  I managed to configure OE once again, so I can receive messages via my site, but really need to come back to the 'old'.  Any help would be greatly appreciated

  My computer crashed and the system recovery was the only option.  I know this reformats the hard drive and actually returned the PC to factory State, but I cannot now access all of my old emails and contacts on OE.  I managed to configure OE once again, so I can receive messages via my site, but really need to come back to the 'old'.  Any help would be greatly appreciated

  Two points:

  Suggestions 1. see Bruce Hagen, but it is highly unlikely that you can get everything back. When you perform a system recovery, you lose everything that was on the disc.

  2. it is late to tell you this, but like you apparenly had no backup on external media, you're playing with fire. For the future, you can read this article I wrote: "how to return your computer regularly upward and reliable" to http://www.computorcompanion.com/LPMArticle.asp?ID=314

• How to reformat the hard drive and do a "clean" install

  A recent virus attack, my computer has lost some files of the operating system.  With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '.  I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

  Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

  Thanks in advance

  Skip

  Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

  http://www.theeldergeek.com/disk_management.htm

  In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.

• Try to reformat my hard drive with Winodws XP

  My laptop is messed up and need to reformat the hard drive on the laptop? How to get by doing this, without having to go to a computer store and pay for repair? I visit the site yesterday and clicked on something here and it downloaded a malware scanner and me out of most of the programs has now locked on the laptop that I have no other choice than to erase the hard drive and start over again. In addition, how can I go by checking if the product on the laptop code is correct and still good to use?

  Hi Gvipercb,

  ·         You have your data backed up?

  ·         The laptop has been pre-installed with Windows XP?

  If so, the product key should always hold good for resettlement.

  Method 1: But first, we will launch the Microsoft Safety Scanner to scan the system. Check out the following link to do the same thing.

  Microsoft Safety Scanner - free online tool for PC health and safety

  You can also download and install Microsoft Security Essentials.

  Method 2: If you want to reinstall the operating system, see the article mentioned. But make sure you have your data backed up.

  How to install or upgrade to Windows XP

• How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.         I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.

  On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.

  You must go into the BIOS and change the boot on CD order
  first push.

  How to get into your BIOS? It is not dependent on Windows, but on what he
  motherboard/BIOS card that you have. In fact, you need access to the
  BIOS before Windows begins to start. A common method is to press
  the key delete when you turn on first, but this is not necessarily true
  for your computer. Watch the display carefully when you start first;
  There is often a message here to tell you what to do. If this is not the case, check
  your system documentation or check with your provider.

• Re-installation after reformatting the HARD drive

  Due to the infection by the Virus, I uninstalled my copy of Acrobat X Pro. After reformatting the HARD drive, I downloaded and re-installed the latest version of Acrobat Pro 10. When installing, I get the license number and it is accepted as correct. However, when I run the program it invites me to re-enter the license and then, States that no matching program is installed on my computer. Please help.

  Hi, Alvaro, we checked the details around the serial number you mentioned, Acrobat version 8 volume license serial number.

  Please Contact Customer Care to get this fixed number.

  Atul_Saini

• Dreamweaver CS3 - cannot activate after reformatting the hard drive

  Hello
  I had to reformat my hard drive due to a virus and took note of all my serial numbers.

  I have Dreamweaver CS3 on laptop with disk and accept my code but then I have to call to activate fully.

  I then get a message on the phone telling me to go to adobe.com/go/activation, then, I can't do anything.

  He told me of click on help in dreamweaver and activate from there, but I can't go in front of a screen of activation to get there.

  Please help I need to work on my site.

  TIA Ian

  I have CS2 has been disabled due to a "technical problem" without name.

  Regarding the OP, I uninstall and run the tool for cleaning and then try again. The cleaning tool is available here: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  You also "peut" benefit to try installing this way, make sure you follow ALL the instructions...

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

• Satellite M115-S3094: how to make a partition without reformatting the HARD drive?

  Hello

  recently bought a laptop Toshiba M115 comes with 80 GB ' SATA drive and XP MEDIA CENTER 2002

  (1) how do I partition without reformatting the drive.

  (2) even if the laptop came with a pre-installed xp. I was wondering what happens if I want to reinstall xp media center, if and when required. Y at - it a disc that I can order (I have the license)... What options of backup kindo f are at - it?

  first time with toshiba... so am new at the mercy of the workings...

  DMM

  Hello

  1.), I use the Partitions Magic 8 to create partitions on the HARD drive.
  This application is very nice and I love it all simply ;)
  You can change the size of the partitions, status and you can fully manage the partitions on the HARD disk. And the best thing is you do not need to format anything B-)

  2.) well, the computer Toshiba laptop are delivered also with the recovery CD. I think that all manufacturers of laptops offers this CD of restoration with own products.
  In any case, on this CD, you'll find Tosh preinstalled operating system drivers.
  If you want to install other OS (XP MCE) you can do it, but you should check if there are drivers that are needed for this OS. But I have XP drivers should also work with thin MCE.

• Reformat the hard drive and a clean reinstall of Vista

  Hello
  I was wondering if you could advise me if this is possible.
  I have Vista on a partition, a home machine built dual boot (with XP), who begins to fill. I decided to stop using XP, which

  is sitting on the second partition of the hard drive, and I want to reformat the disk and a partition with Vista on it. Taking into

  mind, I'm not bothered about losing all the data and save nothing, in my opinion, I don't want to lose, can I just reformat the hard disk into a single

  Partition and reinstall Vista? I'm sure that the answer is Yes, but my main concern is to ensure my "serial key" is accepted and that the activation

  process will go smoothly. Read other messages I prefer not to use Vista to reduce the size of the XP partition and prefer to make one

  clean install.
  Your help and feedback will be greatly appreciated.

  On Thu, September 16, 2010 08:40:58 + 0000, rainb0wman wrote:

  I was wondering if you could advise me if this is possible. I have Vista on a partition, a home machine built dual boot (with XP), who begins to fill. I decided to stop using XP, which

  is sitting on the second partition of the hard drive, and I want to reformat the disk and a partition with Vista on it. Taking into

  mind, I'm not bothered about losing all the data and save nothing, in my opinion, I don't want to lose, can I just reformat the hard disk into a single

  Partition and reinstall Vista?

  Yes. Do a clean install of Vista and leave this formatting occur
  the first stage of the installation.a

  I'm sure that the answer is Yes, but my main concern is to ensure my "serial key".

  You mean the product key, not series.

  is accepted and that the activation
  process will go smoothly.

  You can reinstall and reactivate as many times as you need or want.
  No problem. Worst case, if it's some time since the last
  activation, you may need to activate by phone call, but it's
  quick and easy.

  Ken Blake, Microsoft MVP

• Windows 8 fact Full Reset will reformat the HARD drive and delete the Partitions?

  Hello

  as well as the State title,

  1 *-Although do a Factory Reset in Windows 8 or 8.1 reformat my HARD drive and delete my partition? OR

  2 *-my Partiting created will remain untouchable with all the files I have storage here?

  Thank you in advance...

  Hello

  as well as the State title,

  1 *-Although do a Factory Reset in Windows 8 or 8.1 reformat my HARD drive and delete my partition? OR

  Only the drive on which Windows 8/8.1 is installed will be formatted, other partitions or hard drives will not be formatted.

  2 *-my Partiting created will remain untouchable with all the files I have storage here?

  Yes, it will remain unchanged.

  Thank you in advance...

• Cannot import Windows Mail 6.0 files after reformatting the hard drive

  Desktop HP of my wife had to be reformatted.  It is under Vista Home Premium.  Email is vesion Windows Mail 6.0.  I exported all the personal files in Windows Mail she wanted, through the export feature.  They are stored on a DVD right now.  The problem is that once I have reformatted the hard disk to the original factory conditions, I can't import files or messages.  The import in the Wizzard options is for Windows Mail (with outlook and Express) 7.  When I choose 7 Mail I get the following error message: "no messages are located in this folder or another application is running that has the required files open.  If I navigate to the actual stored email files on the backup DVD I can open individual emails so that they were saved.  What can I do?

  It is a bit of extra work, but it will do the job.

  • Copy the files from the DVD to the desktop.
  • Open WinMail and create the folders that you need to match those on the desktop.
  • Open a folder on the desktop and you should see all of the messages as .eml files.
  • Select all, then right click on them. Drag the corresponding folder of WinMail and copy here.

  That worked? You can remove the files from office once facts.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Just upgraded my iMac to Yosemite.  He is now on all fours.  I intend to reformat the hard drive and install fresh Yosemite and reloading the hard drive.  Can I turn my CS 6 Suite and Lightroom and then reinstall.  Everyone knows a sl

  I installed my iMac (2009) in Yosemite.  He is now on all fours.  I intend to do a new installation of the operating system.  This forces me to format the hard drive.  I have already backed up my data.  With further regard to CS 6 and Lightroom is the appropriate mechanism to disable the program and then reinstall it from my Adobe account?  Any other input would be appreciated.

  Yes, disable it before uninstalling.

  to reinstall, you only need your serial number and installation files.

  the installation files:

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".