try to reinstall dell AIO printer wizard does not recognize the installation disc w / my compatibility

Similar Questions

• Windows 7 does not recognize the installation discs

  Hello

  I have a problem, and I don't know if there is a solution, but here goes.

  My laptop is a HP DV6-7029WM Windows 7, 64 bit.

  The hard drive was dead, and he was replaced last month.  I sent it to HP.  C is the hard drive, and was originally the recovery on D. Removable media were on E, and when I connected a USB stick or memory card reader it would on F.

  When I came back, hard drive was on C as it was originally, and there was no recovery drive D. D is now my removable media drive. When I put in a USB stick or a memory card reader, which is now on the E drive.

  After I bought this, I put the recovery on a USB key, but I've accidentally thrown out. (My mistake) So I ordered the installation diskettes after that I return my HP PC.  I had 2 DVD system recovery disks and an Application and a recovery DVD Drivery.

  I want to reinstall Windows back to the default settings. I put disc 1 (System Recovery DVD) and close.  I reboot and it goes directly to the office. I hear the whirring disc, but nothing happens.

  I go to the control panel > Recovery > advanced retrieval methods. I click on restart, and it loads files and then says DVD set, which I do. He told me that he does not recognize the installation disc.

  I googled this problem and found a poster on CNET that had the same problem as I do. Also, I can't do a system restore.  My problem is the same as this poster on CNET.  I can read DVDs and CDs.  Those that work very well.

  http://forums.CNET.com/7723-19411_102-568059/Windows-7-installation-disc-not-recognized/

  The files are on the DVD, because I see them.

  I don't know what to do. Should I send my PC back? Can I do to solve this problem?

  Thanks in advance.

  pen

  Hello:

  With recovery disc 1 into the DVD drive, restart the computer and at the beginning of the HP welcome screen, press the ESC key to display a menu of options.

  Select the F9 boot menu option.

  Select the DVD drive on the list of bootable devices, and press the Enter key.

  Watch the screen for additional instructions.

• My computer won't let me not reinstall windows because he thinks that it is 32-bit and does not recognize the installation discs. Help please?

  My computer has not worked since I stopped him during an automatic update. Which I have been kicking myself since then, but the last time that he updated, he beat the computer and I panicked.

  Anyway, it won't run certain programs, including iTunes and a large part of MS Office, and no matter how many times I try to reinstall, they still do not work, saying: "side by side configuration is incorrect."

  What I want is to restore it to factory settings - all my data is secured and sustained upward. But when I put in my recovery disks (and they are the highest boot priority in the BIOS) the system takes care of the hard drive as usual. When I remove the ability to boot from the hard drive, my system no reserves at all, telling me to restart or insert a suitable disc. And when I boot from the disk and try to run it manually, by clicking ETFSBOOT, it tells me that "the version of this file is not this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program. »

  I have double and triple checked this - my system is 64-bit. My records are 64-bit. As far as I know, the computer got garbled during the automatic update and now part of it think it's 32-bit (some programs are divided into sections 32-bit and 64-bit). All I want to do is to reinstall windows, but I don't know what to do because it does not recognize my discs! Any suggestions, internet?

  Thank you very much.

  In addition, if it is relevant, I'm Windows Vista on an ASUS K50IJ laptop. I do not have the windows install disc because the computer was shipped with windows installed, but I have the recovery disc ASUS (which have been used to restore my computer in the past).

  Hello

  Since you are unable to open programs like iTunes or Office, you can try to perform the system restore and check if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  About the factory restore the question, you need to contact ASUS support for additional help on ASUS recovery disks.

  ASUS support

• Computer does not recognize the installation disc

  original title: how to install windows 7, vista, virus a

  not able to recognize the drive

  Hello

  Try this to clean your vista operating system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Vista 64 Windows - stuck in the windows error recovery loop. don't go to safe mode, does not recognize the recovery disc.

  Gateway dx 4200-ub001a

  quadruple-heart, 6 GB of ram. No hardware problem, that I can find.
  restarts just constant return to the windows error recovery screen.
  get a blue screen saying change the bios if it continues to happen, but nothing specific. Impossible to get
  BIOS screens in any case. nothing takes me out of the loop, I can understand.

  See if you can load (using F10 or F12) a free Diagnostics, bootable from here: http://www.carrona.org/initdiag.html

  If this does not work, then try F2 to enter the BIOS.
  Together, the boot order so that the CD/DVD is first, then try to run the diagnostics bootable from here and free: http://www.carrona.org/initdiag.htmlf

  If this does not work, then you need to try another CD/DVD drive (or take it to a shop for an estimate).

  Good luck!

• Setup does not recognize the installation on Macintosh disk

  I installed PhotoShop on my new Mac Mini (before CS5 on my MacPro). I got through the installation process to the point where she asked my 'Adobe CS5 Web Premium' drive to insert. It is already inserted, but is not recognized. I ejected and re-inserted the disc; I restarted; I tried over and over again, but it's not 'see' the disc, even if it is right here on my desk. I can't go beyond that point.

  I reinstalled Acrobat Pro successfully and Illustrator before without any problem. I am trying to install PhotoShop separately. Help.

  You can try to download the Suite and using the serial number of your drive to activate...

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

• XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  It is usually best to install the drivers before connecting the printer. Use the printer installation disk, if you have one, or follow the procedure here:

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&l=en&s=Gen&DN=TT1092882

• HP Printer Wizard does not open in HP 3050 All In One J610 series.

  HP Printer Wizard does not open in HP 3050 All In One J610 series after installing new ink cartridges.  Uninstalled and reinstalled printer software from HP website.  Printer Wizard will not always be open.  Using Windows 7.

  I understand the Printer Wizard does not work for you. I will try to completely uninstall the software and reinstall with updated drivers.

  Click here for the drivers

  Let me know how it goes.

• HP PRINT WIZARD DOES NOT

  Recently, I discovered software basic IE my printer that the Print Wizard does not open. As such, I cannot perform all printer maintenance tasks and creates a lot of problems. Someone please help

  Model of printer - HP Deskjet INK ADV 2010 K010.

  OS - Windows 7 Home basic (64-bit)

  Computer model - HP Omni all - in - one

  Download and install the drivers and full software on the HP website.  Try now.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4157330&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=4157433

• the printer port does not recognize hasp key

  I recently bought a Dell rebuilt to replace a running xp sp3 which had overheating problems with windows xp sp3.  I am running a previous software (7.5V2 friendly technology FlexiSign Pro) program that requires a hasp on a parallel port key.  I never had problems with the old computer recognizing the hasp key, but when I try to use this software on the new computer does not recognize the HASP.  I think what may be due to the fact that my new computer printer port is configured as instead of the lpt port ecp.  Is it possible that this could be my problem and I can change the port of older style? Any guidance is appreciated.

  Thank you

  Greg

  If the problem really is whether the parallel port in ECP mode, you can switch to EPP mode in the BIOS.  Restart the computer and keep a close eye at the beginning of the boot sequence for the message that tells you what key to press to enter the BIOS (change system settings or similar).  Restart again and press the key when the message is displayed.  You will have only a few seconds.

• Put HP1012 in place. The installation process does not recognize the printer.

  I've made sure the device is on and the usb cable is connected.  Printer worked fine until I needed to reinstall the windows xp operating system.  Now reinstall the printer set up the software does not recognize the printer.  Before reinstalling the operating system, the printer worked great even if it is quite old.  I use the original CD game in the installation process.

  Problem solved.  I plugged the printer into different usb port cable and the computer immediately recognized the printer.  Previously, I had ports different usb, but not the one where he worked.  I have 7 usb ports on this computer, and it seems that one does not work.

• HP Solution Center does not recognize the network printer

  Network has a hp 309 a printer, can print from the computer, the problem is:

  HP Solution Center not load-says incomplete installation.  If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.

  Question how can I get the Hp solution program to reward the network printer.  If I reload the CD, then reinstall the will other people on the network of the problems?

  Resettlement on your machine won't affect only you, no other machines on the network.

• Dell XPS 13 (L322X) does not recognize Dell U2713HM

  Trying to connect my new laptop / monitor - but my toys will not play with me. Have connected each via supplied usb cables (most mini dp - DVI adapter + dvi cable). Received the error on usb install re failure / unknown device? When running Dell display manager error I get following:
  «This program requires a Dell monitor and driver support compatible display.»  If you think that your system meets these requirements, try power cycling the monitor and/or update the display driver. »
  I downloaded the drivers from the dell site, but when run Setup it does not recognize the monitor and thus used to install drivers
  -little a catch 22?  do I need or there at - there a way to force the installation of the driver? Assumed that these devices are compatible and if yes, can I someone help me?

  Thank you very much!

  -Craig.O

  

  It seems that the problem is with your "mini dp - DVI adapter + dvi cable. Try a direct connection, without maps, and you should be all set.

  (Install the drivers manually is possible, but won't help here.)

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive?

  My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive? He has already done this, but even when I run back to an earlier date, it does not work. FixIt identified the disc as work, but there must be something missing the program of My Documents.

  Hello

  What program are you using to burn CDs?

  Follow the steps in the link below and check:

  http://support.Microsoft.com/kb/324129

  It will be useful.