Try to rename the profile, now cannot start FF because it says it is already running

Similar Questions

• After you rename the data file, cannot start database

  Oracle 11 g 2
  OEL 5 (ASM)
  Network infrastructure (cluster install) - no CARS yet
  
  Something interesting happened. Perhaps this question might be more suited to the "ASM" section, but that's.
  
  I gave a data in ASM file an alias with the following command (the ASM instance):
  

  SQL> alter diskgroup DATA add alias '+DATA/oradb/datafile/users01.dbf' for '+DATA/oradb/datafile/users.253.795630487';
  
  Diskgroup altered.

  Then, as mentioned in Note: 564993.1, we need to update the database as well with the new alias. However, when I went to the stopping and starting of the database, I received the following:
  

  SQL> shutdown immediate;
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup mount;
  ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

  It's strange. Nothing has changed except the alias being added to the data file. This is all before operation. That's happened?
  
  I think that it may have to do with the different ASMOPER, ASMADMIN, ASMDBA groups that have been installed as part of the installation of the grid Infrastructure. In addition, the listener is running out of the GI home.
  
  All my variables environment (e.g. ORACLE_SID, ORACLE_HOME, etc.) are defined.
  
  Any ideas?
  
  Thank you.

  Hello
  When you connect with tnsnames alias while the database is down the listner did not know the service, so you must start the database on the server database with sqlplus / as sysdba. After starting the registry of data base with the listener and your connection works again.
  Alternativ you can add a service to your listener.ora to connect with him while he is arrested, as long as you do not have it you must use local connect which means sqlplus / as sysdba.

  concerning
  Peter

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• Update interrupted - now cannot start Windows

  Hello

  Completely new to this forum and in the world of the system recovery / technical questions will therefore be very grateful for any help that you can offer but please keep clear answers.

  I am running windows 7 on a Samsung laptop about 3 years. During the last weeks I had problems with the battery. When not plugged in the laptop sometimes turned off and the error messages pops up saying occasionally replace the battery. I now only use it plugged into the mains. However, yesterday, when I tried to stop, windows installed updates and the wall socket, broke off. To my horror, the computer turns off so that the update (1 of 31).

  Now, I can't start windows. See below what I tried so far without success.

  Tried to load Windows normally. Key start-up windows screen and then error blue screen and restarts.

  Tried to select recovery at startup option. Through repair screens. Asked if I would restore the system to an earlier era. Tried by selecting Yes and no at this point. So yes, message says not able to repair and asks if I want to send an error message. In the absence, said also unable to repair.

  Tried to start in safe mode. As above - will from the screen windows and error, then blue and restarts.

  Tried to insert the Samsung recovery cd. When the computer starts. Press the key to load from cd. This goes to a windows install page (select language, etc.). Seems to be saying that if I do that I'll lose files?  So not go one more away.

  Have you tried pressing f8 and repair different, but process as well as above - unable to repair.

  I myself am kicking to not fix the battery problem, but I never thought it would happen. In any case, I have a recent backup of most of the files, so not a total disaster, but I would like to save some recent if possible files. The only other option I see is to remove the hard drive and buy a USB connector stada (?) and try to transfer as an external drive. How difficult is cela and what connector do I need? Understand you can not recommend a product, but is there something specific I should look for, and what are the differences between the cheapest and most expensive? Are there more reliable / brands of higher quality that I should look for? Also, if I do this, can I then replace the hard drive and reinstall windows, and it's going to work?

  I have no knowledge of the BIOS so not sure I can try relating to the recovery of base?

  Will be very grateful if someone could help it. I can post more detailed error codes / logs later when I'm in front of a computer if you need.

  Hello

  Thank you for visiting Microsoft Community and your efforts to resolve the issue is highly appreciated.

  According to the description of the problem, you cannot start your Windows 7 computer. This could be if there is a corruption of system files or boot files are missing or damaged.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com

• Receive the error message cannot start the base engine, the application can not continue trying to work with Skype and Intervoip

  Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?

  My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?

  Base engine
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/core-engine/a18d491c-25e2-4473-A03B-1f3161c5131b

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Two applications load mode safe mode with setting in network or a clean boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, have the same problem?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

• I get "failed to load your firefox profile. It may be missing or unreachable. "When I open firefox and when I try to open the Profile Manager.

  I get "failed to load your firefox profile. It may be missing or unreachable. "When I open firefox and when I try to open the Profile Manager.

  OK I don't know what helped me exactly... but that's exactly what I've done so far.

  1 windows-key + r & open '% appdata%\Mozilla '.
  2 right click somewhere on the empty space in this folder, go to properties and make sure all protection read only for containinh the files and folders of
  3. Open firefox (version 13) has not been opened. Error as seen in the screenshot above.
  4 uninstall firefox.
  5. install firefox beta 14.6.
  6. Open firefox, works very well.

  I'm not sure if step 2 has helped as well as of the uninstall and reinstall.

  Thank you once more for the answer.

• Firefox, or the Profile Manager will start. In my task manager, the process uses 50% of my cpu but does nothing. I like browsing with firefox, how do I fix?

  I tried to restart my computer, the I tried to uninstall and reinstall uninstall, delete all files of firefox and folders, then reboot and then reinstall. Also, I tried to open the Profile Manager to edit my profile. After you have reinstalled several times and try to open the Profile Manager before launching firef0x, I got the firefox crashed window and the process in the Task Manager always uses 50% of my cpu. The most recent strike and then re - download gives me an error "the file is corrupt" and will not even install the program.

  Kill the process that you see, including any plugincontainer.exe, only once firefox has stopped running don't try to update.

  Completely unexpected instances of firefox running can sometimes be the result of malware activity.

• I send only less than 10 emails per day on my pc at home. 80% of the time, emails cannot be sent because the server of hotmail says that he is busy and to try again later.

  80% of the time, emails can be sent?

  I send only less than 10 emails per day on my pc at home. 80% of the time, emails cannot be sent because the server of hotmail says that he is busy and to try again later. It is even difficult to register the email project, the system responds that the server is busy.

  Hello Charles MEdgar,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• How to rename the profile folders?

  Original title: How can I change the name of the user accounts on the C drive? no option to rename for her. I just want to put my real name instead of the name that was put in when I bought the pc. Thank you!

  The folder that referring to IM has been one that has a padlock under the user folder in the drive c. I want to just put my real name on the record. Thank you!

  What you refer to, is not the name of the user account, but the name of your profile folder. Here are a few options to align it with your real name:

  • Create a new account, this time under your own name, and then transfer your files and folders in front of the old profile folder. It is the recommended option.
  • The registry hack, then rename the profile folder then in Safe Mode. It is a demanding process that requires good PC skills at a maintenance level, including familiarity with the console controls.

• I get the message 'the' device name' cannot be stopped because a program accesses still it."when using safely remove hardware program.

  Trying to read an external drive "Xcraft", by chance the power supply cable was disconnected. I ' v ereconnected the cable and try to remove the device using the ' renove safely» The unit is not stopped after selection and | I get the message 'the' device name' cannot be stopped because a program is accessed again. ' Y at - it patches or wrap-around work. Just, I can't access the drive. Appreciate any help.

  Try this and see if you can get it to unlock. If it does not just try to restart your computer without USB drive.

  The download is from Microsoft so it's safe!

  Good luck!  Please rate me upward if you find my post helpful. Thank you!

• When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed)

  original title: codec

  When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed) how can I fix it?

  Install the codec.  Really.

  Something like GSpot to understand that one.

• codec error, I get the message (file cannot be imported because the codec required not installed) how to install appropriate codec?

  original title: codec

  I have windows vista Home premium.  I get the message (file cannot be imported because the codec required not installed) how do we install the right codec

  ... How to install appropriate codec

  There is an excellent set of codecs available here.

• I receive an error when I try to download the trial version of After Effects an Adope Id I have already

  I receive an error when I try to download the trial version of After Effects an Adope ID I have already

  Download and install the desktop application Adobe Creative cloud and then connect with the Adobe ID and then click the applications tab, and then click the Try button beside Affter Effects:

  Windows version Adobe Creative Cloud Setup:

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Reference:

  Download and install Adobe Creative Cloud apps

• Try to download the latest version of Adobe Reader. When I press 'install' and run the download, it tells me to close Internet Explorer. However, I have closed internet Explorer and have no other open programs

  Try to download the latest version of Adobe Reader. When I press 'install' and run the download, it tells me to close Internet Explorer. However, I have closed internet Explorer and have no other open programs

  Hi 2006screenname2006,

  Restart your computer and download & install Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if the problem persists.

  Kind regards

  Nicos