Try to set up a home network on XP but the router has no USB to connect to.

Similar Questions

• try to set up a home network with two different operating systems.

  My mother has a desktop in Vista and two laptop computers, 1 on Vista and XP 1. the office is connected to the internet and has a wireless modem. the two laptops are wireless connections and both can connect to the internet using the wireless. The printer is connected to the desktop computer and file/printer sharing enabled. I can't connect to a home network.

  Home both my desktop and my laptop are Windows 7 and both are connected to the home network and I can share my printer. I can't seem to find the right/instructions buttons to connect his and do his work. Any suggestions?

  I tried to run the tutorial "set up a home network" and solve problems, but since they are different versions that the buttons are not in the same place and are marked differently.

  Hello

  This"the desktop computer is connected to the internet and a wireless modem" , is not clear.

  To have a coherent network, the Modem is connected to the network, the router must be connected next Modem WAN, and the wire from the computer or the wireless must be connected to the router.

  -------------------

  In general.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Try to set up my email on an ipad, but the information that I am using my settings is unacceptable for the ipad and says "can't connect using SSL '.

  As noted above, implementation of ipad, but it requires a verification email to be sent. He sent to my e-mail about 1 million times, but it is not.

  Spent by the installation of mail on the ipad, but when I try to send, it says 'cannot connect using SSL '.

  Then returns with this "account is perhaps not able to send or receive emails"

  What is the point of this?

  All this is in order to simply get a verification email, if I can use so I can use iTues to buy apps.
  Without the verification; I can't do anything at all with the ipad.

  OK, I'll try, but I doubt that you will like my answer no better.

  1. Thunderbird does not work on IOS.
  2. There is no such thing as a Mozilla email account.
  3. Mozilla do not e-mail addresses, except for their personnel issue.
  4. Thunderbird is a mail client, it connects to e-mail accounts that are provided by third parties and aggregates and downloads mail from these accounts.

  So, at the risk of being called another tool. I suggest that you contact the people who actually you issued with the e-mail address, as your ISP, Yahoo, Microsoft, Google, GMX or among the thousands of other email providers. They most likely have a very detailed tutorial on their website on how to configure an iPad to their email accounts.

  You won't get an answer to your original question here, simply because your question assumes that you have an e-mail account of Mozilla. You do not have.

• Unable to set up a home network with XP

  Hello
  Tried to set up a home network, I'm having no success.
  My dektop running XP Home Edition and connects on a Belkin N wireless router, which in turn connects to a cable modem for internet access.
  I managed to put in place 3 laptops (1 on XP, 1 on Vista and 1 in windows7) to access the wireless internet via the router.
  I had expected given the Office a central store for music and images and allowing laptops to access the information about it, but no matter how I try, I can't the Office to see laptop computers or laptops to see the desktop. The router DHCP information lists all the PC when connected.
  I am at a total loss, could someone please?
  Concerning
  Yianni

  What antivirus is installed on your computer? Disable the and their firewalls including windows firewall

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/
  http://Windows.Microsoft.com/en-us/Windows-Vista/join-or-create-a-workgroup

• I need help setting up my home network - windows vista.

  I need help to configure my network, I ave a laptop & hubby the computer w / dsl wireless rouuter. If I can get trhis to work, maybe we can work on the printer.

  Original title: help w / home network

  Hi Luvy,

  Thanks for posting your query in the Microsoft Community Forums!

  Looks like you need information to set up home networking on the windows vista computer.

  We're here to help and guide you in the right direction.

  -What is the number of brand and model of the computer?

  I suggest you to return the items online help and check if it helps.

  Setting up a network home

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-home-network

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  To install the printer on the network see Help below articles.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-in/Windows-Vista/install-a-printer-on-a-home-network

   

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows-Vista/share-a-printer

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Transfer of large files on home network freezes and stop the transfer

  I have a HP Desktop running Windows 7 and laptop HP on Vista 64-bit. I have two networked computers on a home network with a 3Com network 10/100 16-port switch.  When I try to transfer files greater than approximately 2.5 gigabytes between two PCs, file transfer will hang and stop after about 2.5 gigabits. Below the size of this file, generally no problem, the transfer ends. The two PCs have file sharing turned on and as mentioned on any file less than 2.5 gigabits transfer / very well.  Is there some sort of transfer of files, size limit on Windows Vista and 7 OS?  Are there settings that I can change to allow to transfer large files? I got an old Sony PC running Windows XP and I could transfer files more than 2.5 gibabits to my storage device shared networked home without any problem.  But under Vista and 7 OS, even once, I can't transfer any file more 2.5 gigabits to my home network shared storage device.  Anyone has any ideas how to solve this problem? Thank you. NEOhio123

  I fixed this problem on my laptop running Windows Vista 64 bit. I remembered that first of all, this started occurring after that I used the IOLO System Mechanic 9 network optimization tool to optimize the settings of my network on my laptop.  So I ran the cancellation on my Windows Vista laptop, and now the laptop with Vista will once more to transfer large files. If a note to all of you who use System Mechanic... do not function of optimization of the network on a Vista PC tool run... .or if you wash and start experiencing problems of transfer of large files... run the cancel this function and rebooting.  You should be able to transfer large files again. I just sent IOLO an email to warn of this problem with the optimization tool of the network within their product of System Mechanic 9.

  UNFORTUNATELY, my new desktop computer running that Windows 7 has still this problem , it stops file transfers after about 2.5 gigabits are sent to my device of storage attached to the network or the laptop. I learned that this seems to be a problem in a way. I can pull large files of my storage device, network or laptop, I can not just to transfer large files to these devices with the Windows 7 desktop. So if anyone has any ideas of how to resolve this problem of transferring large files with Windows 7, I would appreciate your insight.
  NEOhio123

• I've set up a new account of emal that the original has been hacked. I want to inform all my contacts the new email. Hotmail only allows me to send 9 emails per day until I verify my account.

  I've set up a new account of emal that the original has been hacked.  I want to inform all my contacts the new email.  Hotmail only allows me to send 9 emails per day until I verify my account.  Box for this constantly, says 'problems', try again in a few minutes.  This lasted for more than 12 hours!

  How to check my e-mail account so that you can send to all my contacts at once and send emails to more than 9 per day.

  Thank you.

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  If you are running Windows XP... There is a slight chance
  that by running the following command would be the fix:

  Reach... Start / run... and type or copy / paste the following text:

  regsvr32 %windir%\system32\qdv.dll

  Then... Press on... Come in...

  You should see a dialog box stating:

  DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

  Good luck...

  There is debate on this subject in the following forum:

  Windows Movie Makers Forums
  An unknown error has occurred

• I try to install Lightroom 4 on a new machine, but the media are hosted by Adobe.  I can see my license number but do not see the option for download.  Y at - it a link to the downloads for this media on the Web site?  It does not appear in my one Adobe

  I try to install Lightroom 4 on a new machine, but the media are hosted by Adobe.  I can see my license number but do not see the option for download.  Y at - it a link to the downloads for this media on the Web site?  It does not appear in my Adobe account.

  Adobe - Lightroom: For Windows

  Adobe - Lightroom: For Macintosh

  Mylenium

• I bought adobe acrobat, but every time I try to open it I get a message saying that the trial has expired

  I bought adobe acrobat, but every time I try to open it I get a message saying that the trial has expired.

  Acrobat successfully downloaded.  no problem.  but it does not open.  don't give me the error message that trial has expired and I want to buy it.  I already bought so... I'm stuck.  I tried closing everything down and start again (twice) always the same error.  tried to re - download. no help.  any ideas?

  It gives you an option to connect or upgrade this software under license. If yes click identify you / license of this software to go further and turn it on. If it's a perpetual license activate by entering your serial key and connecting and if it is a subscription then just sign in with your Adobe it will activate a said.

• set up a home network with the PC using xp vista and windows 7

  I need to know how confugure my desktop vista and xp desktop and cell phone with my computer laptop windows 7.  detailed with inustrictions or links please.

  Hello

  You plug the computer via the network to a router or a switch card, and configuring their file sharing.

  ---------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I need help setting up a home network

  I have a 7 m DSL connection. Using a modem without phone/ethernet gateway serving a computer office wired ethernet and a wireless laptop, I would like to know if I should put in place a network home ethernet and add a wireless device or I set up a wireless network and add a wired ethernet device. Two computers use Vista Home Premium 64 - bit OS. I have 1 printer and a XBox (wired) and a (wired) DirectTV receiver attached, too.

  What is the brand and model of your wireless/ethernet modem access point?  It should be able to provide any wireless networks and wired Ethernet network.

  Wired Ethernet ports how do I need?  If she has enough for all computers and devices that you want to network, you're ready.  If not, connect a wired Ethernet switch for more ports.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• -Is this a "no Proxy" security affect setting on my home network?

  I have established that the the unique proxy setting that makes my computer works best is the "no proxy setting. I read, however, that this setting could leave my computer open to hacking and other intrusions. I'm on a home network with no other users. My ISP is Comcast. I have not run any software protection protection other than what offers Windows and everything that gives a router. Is it safe set the proxy server offers 'no proxy '. Even if I have Internet high flow, I can't access most of the sites up to 30 seconds, and sometimes I just get wait times. When I changed the setting to 'no proxy', I was able to connect to the lightening quick sites. I always thought it was Comcast, but it seems that it is this particular parameter which is the culprit. However, if the "no proxy setting' endangers my safety, I'll change it to another setting.

  No, it isn't a threat to the security of your computer.

• The computers on the home network can't see the other

  Hello

  Portable Windows 7 Ultimate my two computers cannot see each other on the home network. Both have their firewall off the coast. We have McAfee installed (but disabled). I can't ping or computers. Both are on the same workgroup. Both are on the home network. Both have their network discovery is enabled. Both have active LLTD protocols.

  A computer cannot find homegroup on the other computer. I tried both ways. All important services are successfully started and running. No problems with network connectivity to the internet. I can ping sites like google.com and yahoo.com. I can't just ping the other laptop on the network. Any ideas?

  Thank you

  SS

  FYI: I have UltraVNC running on both computers. However, the program does not work b/c computers can't see each other. I also have LogMeIn installed on both. This works because logmein works via the internet.

  Hope that you have found your answer now. I had the same problem and mine was the computers have been appointed the same you have he tried but if not try this:

  ·        Step 1) on your keyboard, press the 'key Windows and pause pause' to bring up the 'System Menu'.

  Step 2) when the "System menu" appears on the lower right, click "change settings"

  Step 3) click on "change" on the "System Properties".

  Step 4) Change the 'computer name' (must be DIFFERENT! to other computers)

  Step 5) press "ok" (you will get a pop up just press ok)

  Properties of step 6) on systems ""change "" the ""computer name " the same as the one on (step 4)"

  Step 7) click on ""okay ' and let the computer to restart (If it does not restart just disconnect and reconnect) "

  Follow these steps and you shouldn't have a problem.

• home network always tells that the password is not correct

  Hello

  I try built house netwerk windows 7 ultimate sp1 with windows 7 Home premium sp1. but when I want to Member home House netwerk prenium it still says the password is not correct, while the password is correct.

  I think my self that there is something wrong in the communication between ultimate prenium and at home, maybe some rollup should be installed.

  the active router DHCP configuration, the internal subnet addresses are dynamic, so what can be the problem exactly.

  Thank you

  Johan

  Original title: I try built house netwerk with windows 7 ultimate and 7home premium but does not accept the password netwerk Home Home premium

  It is the home of netwerk, I solved the problem with the activation of some services for extern, connect...

  Johan