try to set up a mySQL DB to connect through DW

Similar Questions

• How to set up the MySQL database to connect from another computer?

  Hello

  I have a huge problem with that.

  What I want to do is:

  I want to create a system (in LabWindows/CVI) this will (among others) allow users to send simple messages to each other. So I want to create a MySQL database , which will be based on a server. Other computers running the system then is able to remotely connect to this database and read a certain table to see if they have new messages. I want that the client computer to connect through the LAN to the database on the server.

  But how can I do this?

  1. How to create a database that can be connected through the LAN?
  
  
  2. How my connection string should look like not on the client computer?
  
  
  3. What configurations on the client and server computers can I do?

  Any help is appreciated, and if you could suggest how can I do to reach my goal. I'm a very competent programmer, but HATE those network things.

  Thank you

  Umer

  Nothing really associated with LabWindows. Try http://dev.mysql.com/doc/refman/5.7/en/tutorial.html for the database installed and running on a server.

• Try to set up a channel port to connect a new switch with ports that were previously configured... error

  I have s60 stacked switches.
  OTF version 8.3.3.7

  I try to add a 2 port channel interface, nothing fancy, but I keep getting errors due to the already switch that is configured as a switch on a port vlan by default.

  When I run command "no switchport" on one of the 2 interfaces I get this error

  "error: IM 2/36 port belongs to a VLAN by default.

  When I try to add interfaces port-channel I get this error

  Member of channel gigabitethernet 2/36

  «error: the port is in layer-2 mode 2/36 IM.»

  If I try and move the port of vlan 2 to the vlan by default 1, I get an error of not marked or tagged command?

  I removed the ports in vlan 2 with "no no marked gigabitethernet 2/36" and the 37

  but when I try and run no switchport

  Error: Port has 2 config layer on this IM 2/36.

  different error.

  When I try and add it to the port channel now I get.

  Error: The Port is in mode Layer - 2 Gi 2/36, still

• When I try to set up the synchronization and open an account, I get the invalid e-mail when I start typing my e-mail address.

  not valid email appears when I try to set up the synchronization

  Just keep tapping until the e-mail address is typed completely.

• Why say that I have a wrong e-mail address when I try to set up the synchronization?

  I have an ipod touch. I downloaded the app home of firefox on the device.
  I then tried to synchronize my computer at home.
  When I try to set up a private account with firefox that I go to 'tools', enter "set up a synchronization", and then "create a new account. A window is this "e-mail address." As soon as I start to get into my email, that an "x" appears, followed by "it's a wrong e-mail address. That is what it is?

  Just keep typing until you have entered the full e-mail address.

• Cannot access Firefox sync. My email address is not accepted when I try to set up a new account or enter an account that I may have. Frustrating, because I need to move my favorites to a new computer. Thanks in advance.

  Cannot access Firefox sync. My email address is not accepted when I try to set up a new account or enter an account that I may have. Frustrating, because I need to move my favorites to a new computer. Thanks in advance.

  Ignore this message until all characters for your e-mail address are typed on the input field.

• I try to sync my MS Outlook calendar & contacts to icloud/iphone, ipad.  Now icloud holds my calendar and contacts, but when I try OT set an appointment, I get the dreaded message that it is not in the calendar for this account & wi

  I try to sync my MS Outlook calendar & contacts to icloud/iphone, ipad.  Now icloud holds my calendar and contacts, but when I try to set up an appointment, I get the dreaded message that it is not in the calendar for this account & will not be counted.

  My schedule is extremely important as are my contacts.  How to export the icloud to get back them to outlook.  I use MS Outlook 2010.  I can't put the icloud as my default - Help

  Which calendar you use, there will be two, one to iCloud and who is not, you must be in the iCloud calendar

• try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)

  Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)

  kellycfromlosgatos wrote:

  Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)

  First talk you about selection of a network, and then say that there are no compatible backups. Do you have an older device? Having problems connecting to Wi - Fi, or restore a backup problems? If you had a device more former, is - it possible that this device had 9.2 on iOS? If Yes, then you will need configure the Mini iPad like new, update the iOS 9.1 to 9.2, and then you must use the settings > General > reset > erase all content and settings, to bring him back to the installation wizard. From there, you will be able to restore your previous backup.

• When I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  Using Windows XP Profwssional.

  (1) when I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  (2) can I use this feature when both computers are on the same network?

  Hello

  (1) you must configure your computer to use the remote control - see here:

  http://www.winxptutor.com/raenable.htm

  and don't forget to make the firewall exceptions

  (2) this function works on the different network also (so a computer can be in the United States and one in Australia)

  Note - a computer can have Windows XP (family or professional edition) and another may have Windows 7, Vista.

  LC

• Try to set up my Elipse on my computer. Have the microSDHC card/w adapter. Where should I go from here. The chip is in the adapter but where to insert into the computer to get results!

  Try to set up my cell phone to Elipse with microSDHC card/w adapter.  The chip is in the adaptor, but where can I insert the adapter in the computer.  Have an inspiron 531.  "Any help would be greatly apprecialted!   =}

  Hi NancyDolezal,

  Connect the phone via USB. You must insert it into a USB port and check if it detects is.

• Whenever I try to set wmc for terrestrial tv

  Whenever I try to set wmc for land "all I get is 6 options for my area, but all are TNT? I had overland in the past, but had to reset the pc after you have moved the pc because of the decoration, & can not find how to configure overland again? I am in the United Kingdom, & postal code is hu5 3bh, I hope for the quick response - glenn.

  Thank you Debra' our young been down & sorted now thanks was missing the original menu set up? then he reinstalled my recovery - tools - Cyb * link Home Theatre, & hey presto' restored full menu... PS have saved me * n site for future refs thanks once again.

• ACCESS DENIED WHEN YOU TRY TO SET THE AFFINITY OF THE PROGRAM.

  Hi people, this is my first post here. I have searched the forum for an answer but couldn't find it so please forgive me if I missed it and write the question again.

  I'm trying to get better performance from my pc. I am running a quad core C.P.F. and try to set the affinity for certain programs are not not multi thread. (PC ONLINE EVERQUEST GAME 2)
  I managed to channel some programs, but when I try to set the affinity for Everquest I comes up with an error message.  'ACCESS DENIED '.

  I found a page that had a work around, but I could not quite work on what they were saying.

  If you know an easy way to do it could you help me please.

  Thanks for your time :)

  Hi Dagenham Dave,

  You run the computer as an administrator?

  You can follow the steps indicated by the msspbm, which addresses a similar issue, please see the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a6a57cda-3f2c-48b2-ae8e-42c5965567bb

  This may interest you

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  Please post if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to set up the live tv watch, he finds and then says cannot detect ir material. What can I do to fix this

  I INSTALLED A "AVERTV HYBRID VOLAR MAX TV TUNER AND MY WINDOWS 7 SHOWS THAT, BUT WHEN I TRY TO SET UP LIVE TV IT SAYS"IR MATERIAL.
  NOT DETECTED... " I HAVE ALSO A REMOTE WINDOWS 7 THAT WORKS, I BOUGHT IT THINKING HE COULD SOLVE MY PROBLEM, BUT IT DID NOT.
  JUST LIKE HOW TO IMPLEMENT HELP WOULD BE MUCH APPRECIATED THANKS

  Hello

  What program do you use to watch TV Online?

  Run the implementation of corner store TV tuner - he made sure that your computer receives a TV signal, and that your TV tuner is connected and configured properly.

  Open the set up TV tuner Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Please visit the links below for more information:

  Set up a TV signal in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-Center

  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows7/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center

  Let us know the result!

• Try to set a collection online, he says "generate URL" constantly, but it does not generate a URL

  I try to set a collection online, as usual it is said to "generate URL", but nothing else happens, he just continues by saying that it is the generation a URL. I tried this for a few days, using different collections using different workstations - no way to put online. What can I do else?

  merthin wrote:

  Sorry, I don't know if I understand your comment - of course, I can open this site in Adobe Photoshop Lightroom

  But what has this to do with my problem?

  Kind regards

  Achim

  Well, sometimes this message "generate URL" seems to go forever - yesterday I synced a few collections and it happened once. But if you wait a while and connect to Lr Web, you will see the collection is listed and that everything went well, despite the message.