Try to set up im to store the LDAP user accessories

I am running the script im/sbin/configure. I'm trying to configure im to store accessories user in ldap. Can someone tell me what bind dn, I would say. It will be all that is the default value. I don't know how to find it.

Dn default binding is normally 'cn = Directory Manager'.

Tags: Oracle

Similar Questions

  • Question about deleting of the LDAP user and integration

    In the Document "Management Console Help", he States:

    "You can't invite accounts of users that are mastered in a user directory LDAP; These accounts are created automatically when you synchronize the LDAP directory. »

    This means that after you configure an LDAP domain, the users specified by the filter should be automatically attracted to OnTrack? I don't see the ldap users during execution of an empty search for the administration console. At this point, I can also connect to the OnTrack using a valid LDAP user. I was trying to see if OnTrack worked similar to the Complutense University of MADRID, where the OnTrack user account would create once the user logs in the application.

    What I can do, is go to "Create a user" and enter a valid ldap user's email address. then I see this user in the full search. This user can also connect successfully.

    I wanted to know what was the expected behavior: it should be a 'register' required ldap users in ontrack before auth in the app? Is there a synchronization process that must be executed to pull in the ldap users?

    Also, is it current best practices of removing users? I see in the administration console there is a note that says: "Note: removing users is not supported."

    As always, thanks for the info!


    Thank you
    -ryan

    Ryan Sullivan | ECMconsultant
    http://www.ecmconsultant.NET/

  • I try to sync my MS Outlook calendar & contacts to icloud/iphone, ipad.  Now icloud holds my calendar and contacts, but when I try OT set an appointment, I get the dreaded message that it is not in the calendar for this account & wi

    I try to sync my MS Outlook calendar & contacts to icloud/iphone, ipad.  Now icloud holds my calendar and contacts, but when I try to set up an appointment, I get the dreaded message that it is not in the calendar for this account & will not be counted.

    My schedule is extremely important as are my contacts.  How to export the icloud to get back them to outlook.  I use MS Outlook 2010.  I can't put the icloud as my default - Help

    Which calendar you use, there will be two, one to iCloud and who is not, you must be in the iCloud calendar

  • Cannot use Authenticate in the configuration of the LDAP user

    I'm deploying VIO in my LAB. I have a problem setting up the authentication source during deployment. When I put my AD information and provide the openstack admin user / password, then click on "Configuration Test user", I get this error: failed to authenticate to vio_user ", which is my account service with the admin rights.

    Even if I put my AD administrator password, I get the same error.

    If I click on the Test link, VIO connects to the ad without any problem, but the second part does not work for me ideas please?

    If you use Active Directory, it must be a domain account. I noticed on the screenshot you posted earlier you didn't DN listed at all, that may be your problem.

    Initially, I couldn't authentication works with my AD user as the admin of OpenStack, until my boyfriend added LDAP user OpenStack AD in the right group.

  • Get the LDAP user running a DBMS_JOB

    Hello!

    I am building an Application at the APEX 3.2 and the authentication scheme is a type of 'See the Page and use LDAP Directory IDs'.
    It all works very well.

    In this application, I give the possibility to download files and sometimes they are really big, so this download is executed by a job (DBMS_JOB. SUBMIT).
    Also works very well.

    My problem comes when I need to know what the user downloads the file!
    If I run it normally, not with a JOB, I can get the user using the package wwv_flow_custom_auth_std.get_username () and returns exactly what I want.
    But if I use this package inside employment it returns nothing.

    Is there a way to get the Apex user that triggered the work, when running it?

    I need this because I have a journal table, with the history of the records that have been updated / deleted and which update/remove the.

    Thank you

    Vania

    Vanya:

    You can do the following in the stored procedure

    Dbms_application_info package to set up "client_info" for the user name passed to the procedure

    dbms_application_info.set_client_info(p_user);

    The stored value can then be retrieved in the current session to help

    select sys_context('USERENV','CLIENT_INFO') into aud_user from dual;

    CITY

  • VCS do not trust certificate - configuration of the LDAP user

    I have a cluster of 2 Telepresence VCS-control in the same network (vlan) and a bunch of 2 telepresence Expressway to same DMZ network (vlan). And both are on the same site. The two masters counterparts I managed to synchronize the servers against the ldap server (AD), but two of the slave with the same config for users/certificate/ldap settings fail. .  "DNS Uable to resolve the address of the LDAP server It seems to me that the peers do not trust the certificate.

    Newspapers that you attached are newspapers events and diagnostic logs not VCS. However according to these newspapers, it seems that VCS slave is not able to connect to the ldap server. If DNS resolution is probably ongoing, but the tcp/tls connection is not established.

    I recommend to make a journal of diagnosis (Maintenance > Diagnostics > diagnostic logging) everything by reproducing the connection failed to see what part of the connection fails.

    If you root for VCS slave access you may also connect as root via ssh and then run the following command:

    > tcpdump-port tcp s0

    Insert the port you use to connect to ldap in the field and then press ENTER. you will now see all the traffic to and from the port. Do you see some resets? Is traffic in one direction? This will help you understand why failure is implemented.

  • that means xml, when I try to set up an analysis of the image years ago, I get the message that there are on this scan xml elements and if I save it, elments of xml will be cleared. What is

    When I bring up some old pictures on my computer, it comes like a scan, when I opened the scan he says he has xml elements, which, if I save it, the xml elements will be deleted, what are xml elements

    The normal definition of xml is the Extensible Markup Language and is the most used in the web development. There is no logical reason why scans contain xml in their breast.

    All files have an extension that is used by Windows to identify what program to use to open the file. Word uses .doc or .docx format, Excel .xls or .xlsx, Adobe uses .pdf etc.

    Right-click on one of the files and select Properties, in the general tab, it displays the type of file and its extension.

    You are referring to 'initials pvt' but pvt isn't a common file extension and is used by a couple of applications, but have nothing to do with analysis or graphics.

    Up to what you did what in fact do a copy files (copy the directory as a whole) and let the originals intact.

    Although Word works with graphics files which is not normally the native program to use, can you explain the steps that you use to open the files.

  • When I try to set up Parental controls on a standard user account a message comes up saying unable to Im. Is there a way to fix this?

    The exact words that the message says: when it comes to the top is: "unable to make changes to parental controls settings. If this problem persists, see your system administrator. " Is not supposed to because I was on an administrator account when it came. Is there a way to fix this?

    Hello

    1. you have installed on the machine by chance Microsoft family safety?

    You can refer to the suggestion of ken in this link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/parental-controls-error-unable-to-make-changes-to/70d3c356-eb55-4e93-98a0-b5f96ac44eea

  • What is the name of the table that stores the APEX User Group

    Hello

    -J' created 2 users (user1, user2) APEX [Developer = NO & admin = NO]
    -also created 2 user group, say Admin & General

    and then have assigned User1 to the Admin group
    and user2 in the general group.

    I am able to find the list of the users of APEX_WORKSPACE_APEX_USERS, but the groups aren't there.
    How to check for groups of users whose individual end-user belongs to... I mean the name of the TABLE...

    Thank you
    Deepak

    Hello

    I missed the post read first
    Point of view is WWV_FLOW_GROUP_USERS

    BR, jari

    Published by: jarola on January 14, 2010 12:47 AM

    Published by: jarola on January 14, 2010 12:48 AM

  • Problems of the LDAP USERS

    Hello guys, hope you had a great weekend.

    My question is this.

    We have 2 environments have all two OBIEE 11.7 installed on one is called DEV and other Production

    LDAP is configured on both servers and work perfectly.

    The problem is that on our PROD environment 3 users can not connect via LDAP, but on DEV they connect perfectly.

    Any suggestions of what might cause this problem?

    Concerning

    Benoit

    Using Catalog Manager offline

    Try to delete the files specific user to PROD webcat (just at the bottom of the housing to the top of their content)

    Update the GUID

    then try to connect with the user

  • Store the user receives the value in a Variable of Odi

    Hello
    I want to store the value user given (run-time) in a .txt file using shell script. If I want to change the value of the user given to the shell script. In the package, I put the variable in mode refresh as a first step, then the odioscommand link OK. When I try to run this package fails (* ODI-1246: * the logical schema has not been set for Input_Variable).

    FYI: -.
    I just create a simple numeric variable. Select the most RECENT VALUE for her and the schema is not defined. Default value is 0.
    After that this problem occurred I select the oracle, memory engine diagram diagram etc and run again the package/scenario but it the same result.

    Please advice
    Thank you
    Papai

    NB
    Here are the details of the problem: -.

    ODI-1246: the logical schema has not been defined for Input_Variable.
    at com.sunopsis.dwg.dbobj.SnpSessTask.getDefaultDwgConnectConnection(SnpSessTask.java:508)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.getExecutor(SnpSessTaskSqlV.java:428)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.processTask(SnpSessTaskSqlV.java:405)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTask(SnpSessTaskSqlV.java:240)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)

    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)

    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)

    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)

    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
    to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
    at java.lang.Thread.run(Thread.java:662)

    Yes. If you want to pass the variable at run time, then you will see a pop-up window. Here, you can pass the value.

  • Set-vipermission to groups at the level of the network in vCenter?

    I tried to assign permissions to objects in network with Powercli.  Based on this link http://communities.vmware.com/message/1563864 Set-VIPermission does not work on the network of the objects and provide a workaround to assign permissions.  This works very well when you are trying to assign users but throws the following error when you set the security to a group entity (IE, domain\group)


    $SpecPG = get-view ViewType - network | where {$_.name - eq "Network"}


    $role = $authMgr.RoleList | where {$_.} Name - eq $role}

    $authMgr = get-View Manager
    $perm = new-Object VMware.Vim.Permission
    $perm.principal = "Domain\vSphere_Users".
    $perm.propagate = $true
    $perm.roleid = $role.roleid
    $authMgr.SetEntityPermissions ($SpecPG.MoRef, $perm)


    Exception by calling 'SetEntityPermissions' with '2' or the arguments: "the user or the group named 'Domain.Local\vSphere_Users' does not exist."
    Online: 39 tank: 30
    + $authMgr.SetEntityPermissions < < < < ($SpecPG.MoRef, $perm)
    + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
    + FullyQualifiedErrorId: DotNetMethodException


    It seems that when you try to set permissions for, it adds the name of domain (in this case Domain.Local) FULL instead of just the domain name.


    Is there a way to remove the COMPLETE domain name in the main name?


    I use VMware vSphere PowerCLI 5.1 Release 2 build 1012425.


    Thank you


    John

    It seems that if you forgot the Group property

    $SpecPG = Get-View -ViewType Network | where {$_.name -eq "Network"}

$authMgr = Get-View AuthorizationManager $roleName = "Admin" $role = $authMgr.RoleList | where{$_.Name -eq $roleName}

$perm = New-Object VMware.Vim.Permission$perm.principal = "Domain\Groupname"$perm.propagate = $true$perm.Group = $true$perm.roleid = $role.RoleId
$authMgr.SetEntityPermissions($SpecPG.MoRef, @($perm))

  • set the resource to the anonymous user in OES

    Hi all

    I'm using wls - ssm.

    By default, OES protect all resources of our application.

    How to set a few resources for the anonymous user?

    With respect,
    WP

    You can either define an OES policy to GRANT allusers group which includes anonymous or you can watch this custom authenticator deployment which will exclude the WLS resources that usually rely on the anonymous user:

    https://OES-SSPI-providers.SampleCode.Oracle.com/

  • How to remove the Standard user account password

    I am the only person to use my computer, as recommended that I've set up an admin and the standard user account. The admin is password protected, the standard user does not have to be. I accidentally answered a guest orders and entered a password and want to remove it.  When I try to remove it, I get the message windows cannot remove the password.     How can I remove this password?  I must stress that it is Windows 7.

    I am the only person to use my computer, as recommended that I've set up an admin and the standard user account. The admin is password protected, the standard user does not have to be. I accidentally answered a guest orders and entered a password and want to remove it.  When I try to remove it, I get the message windows cannot remove the password.     How can I remove this password?  I must stress that it is Windows 7.

    You can't "delete" a password, but you can replace it with a white.

  • Configure vcenter to talk to the LDAP server

    Hello

    I recently installed the vcenter server and trying to understand it better.

    I have a Windows 2003 Active Directory installed in the same network.

    Is there a way where I can configure this announcement on the vcenter server so that users on the Server LDAP (Active Directory) can connect to the vcenter server.

    So, basically, I'm looking to see if the LDAP users can authenticate on the vCenter Server?

    Any help appreciated...

    Thank you.

    You check the authorization of default vCenter, you will see that there is only (local Administrators group).

    When you join the vCenter Server to a domain AD you can see also the domain user, and usually the Domain Admins group is added to the local Administrators group.

    André

Maybe you are looking for