Problems of the LDAP USERS

Similar Questions

• Question about deleting of the LDAP user and integration

  In the Document "Management Console Help", he States:
  
  "You can't invite accounts of users that are mastered in a user directory LDAP; These accounts are created automatically when you synchronize the LDAP directory. »
  
  This means that after you configure an LDAP domain, the users specified by the filter should be automatically attracted to OnTrack? I don't see the ldap users during execution of an empty search for the administration console. At this point, I can also connect to the OnTrack using a valid LDAP user. I was trying to see if OnTrack worked similar to the Complutense University of MADRID, where the OnTrack user account would create once the user logs in the application.
  
  What I can do, is go to "Create a user" and enter a valid ldap user's email address. then I see this user in the full search. This user can also connect successfully.
  
  I wanted to know what was the expected behavior: it should be a 'register' required ldap users in ontrack before auth in the app? Is there a synchronization process that must be executed to pull in the ldap users?
  
  Also, is it current best practices of removing users? I see in the administration console there is a note that says: "Note: removing users is not supported."
  
  As always, thanks for the info!
  
  
  Thank you
  -ryan
  
  Ryan Sullivan | ECMconsultant
  http://www.ecmconsultant.NET/
  

• Cannot use Authenticate in the configuration of the LDAP user

  I'm deploying VIO in my LAB. I have a problem setting up the authentication source during deployment. When I put my AD information and provide the openstack admin user / password, then click on "Configuration Test user", I get this error: failed to authenticate to vio_user ", which is my account service with the admin rights.

  Even if I put my AD administrator password, I get the same error.

  If I click on the Test link, VIO connects to the ad without any problem, but the second part does not work for me ideas please?

  If you use Active Directory, it must be a domain account. I noticed on the screenshot you posted earlier you didn't DN listed at all, that may be your problem.

  Initially, I couldn't authentication works with my AD user as the admin of OpenStack, until my boyfriend added LDAP user OpenStack AD in the right group.

• Get the LDAP user running a DBMS_JOB

  Hello!
  
  I am building an Application at the APEX 3.2 and the authentication scheme is a type of 'See the Page and use LDAP Directory IDs'.
  It all works very well.
  
  In this application, I give the possibility to download files and sometimes they are really big, so this download is executed by a job (DBMS_JOB. SUBMIT).
  Also works very well.
  
  My problem comes when I need to know what the user downloads the file!
  If I run it normally, not with a JOB, I can get the user using the package wwv_flow_custom_auth_std.get_username () and returns exactly what I want.
  But if I use this package inside employment it returns nothing.
  
  Is there a way to get the Apex user that triggered the work, when running it?
  
  I need this because I have a journal table, with the history of the records that have been updated / deleted and which update/remove the.
  
  Thank you
  
  Vania

  Vanya:

  You can do the following in the stored procedure

  Dbms_application_info package to set up "client_info" for the user name passed to the procedure

  dbms_application_info.set_client_info(p_user);
  

  The stored value can then be retrieved in the current session to help

  select sys_context('USERENV','CLIENT_INFO') into aud_user from dual;
  

  CITY

• El Capitan v10.11.5 - problems with the second user

  Just installed 10.11.5.  I am able to log in under the master user, but when I try to log on to the second user, she just the turning wheel under the name after entering the password.  Any ideas of what I should do?  I'm not trying to delete and start again there are programs, files, etc. that are on this profile.  Thank you!

  The first time, it connects after an upgrade of the system always takes a relatively long time (maybe a minute or two) that various pieces of household necessity to do.

  If it's every time, however, you may have gotten a 'connection point' for the second user who is not compatible with 10.11.5.

  Restart in 'safe mode ':

  Try safe mode if your Mac does not end commissioning - Apple Support

  then try to connect. If this succeeds, use

  System Preferences > users and groups > login items

  and disable/enable the suspects until what you identify the problem by a process of elimination.

  If this does not work there are more complicated things to check, such as incorrect permissions and uid duplicate, but I would try first things easy.

  C.

• Problem with the administrator user account

  When I connect to my administrator user account a Windows Sidebar message immediately rises:

  "Settings.ini is being used by another process. Close the other program, and then click Retry, or click Cancel to exit sidebar. »

  The problem is that there is no other program to close so I click on no to cancel. There is also a message from Catalyst Control Centre (program of ATI technology video card) that comes immediately after the message of the sidebar:

  "The host application has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »

  I click Close Program, but no notice is. Try using Windows, I get the message "help topic is not found." I tried the system information (msinfo32.exe) and get the message "cannot collect information cannot access the Windows Management Instrumentation software.» Management of Windows files may be displaced or missing. » !!!

  All the above problem ONLY happens in the administrator user account. Both regular user accounts work fine. Windows help works very well, information system works very well!

  I'd appreciate any help to solve this problem of crazy.

  ZekeF

  If you "move" the files/folders to PUBLIC folders, you can then access them when you are in the new admin account and then you can place them in your personal folders.
  If you do not Move To and copy to options in your context menu, here is the tutorial to "help":
  http://www.Vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.html

  When you have completed the tutorial, try this...
  Right click on any folder/file > click Move To > scroll to the destination where will be moved to the folder/file > click on move.
  That's all. The file/folder is moved.

  Public folders are accessible to all user accounts on the computer.

• VCS do not trust certificate - configuration of the LDAP user

  I have a cluster of 2 Telepresence VCS-control in the same network (vlan) and a bunch of 2 telepresence Expressway to same DMZ network (vlan). And both are on the same site. The two masters counterparts I managed to synchronize the servers against the ldap server (AD), but two of the slave with the same config for users/certificate/ldap settings fail. .  "DNS Uable to resolve the address of the LDAP server It seems to me that the peers do not trust the certificate.

  Newspapers that you attached are newspapers events and diagnostic logs not VCS. However according to these newspapers, it seems that VCS slave is not able to connect to the ldap server. If DNS resolution is probably ongoing, but the tcp/tls connection is not established.

  I recommend to make a journal of diagnosis (Maintenance > Diagnostics > diagnostic logging) everything by reproducing the connection failed to see what part of the connection fails.

  If you root for VCS slave access you may also connect as root via ssh and then run the following command:

  > tcpdump-port tcp s0

  Insert the port you use to connect to ldap in the field and then press ENTER. you will now see all the traffic to and from the port. Do you see some resets? Is traffic in one direction? This will help you understand why failure is implemented.

• Problem with the Login user and scroll form

  Hi all, I have a problem with the form for the user to login to my page.

  There is a connection user transaction and the cursor automatically appears in the tefxfield of connection, which causes the page to scroll automatically, so the banner is completely displayed.

  I tried with the blur() and javascript function, but it simply doesn't. Anyone know a solution to this problem?

  Just came across the following in the file 'includes/tng/scripts/FormValidation.js ': code snippet

  if (typeof KT_FVO['kt_login_user']!='undefined') {
                 var user_name_ctrl = document.getElementById("kt_login_user");
                 if (user_name_ctrl) {
                      user_name_ctrl.focus();
                 }
            }
       }
  

  If I understand correctly, here´s where ADDT´s "kt_login_user" of field entry will focus on loading the page, so I think basic is enough to disable the line...

  user_name_ctrl. Focus();

  .. .to add a first comment in javascript:

  user_name_ctrl. Focus();

  See you soon,.

  Günter

• Problem with the SYS user

  Hello
  I have change the password for the SYS user
  
  export ORACLE_SID = orcl
  
  echo $ORACLE_SID
  ORCL
  

  sqlplus /nolog
  
  connect / as sysdba
  
  alter user sys indentified by orcl_pwd;
  
  sqlplus sys/orcl_pwd as sysdba
  
  SQL*Plus: Release 10.2.0.5.0 - Production on Mon Oct 22 17:14:07 2012
  
  Copyright (c) 1982, 2010, Oracle.  All Rights Reserved.
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options

  but when I try to connect me with @sid I get this error:
  

  sqlplus sys/orcl_pwd@orcl as sysdba
  
  SQL*Plus: Release 10.2.0.5.0 - Production on Mon Oct 22 17:16:09 2012
  
  Copyright (c) 1982, 2010, Oracle.  All Rights Reserved.
  
  ERROR:
  ORA-01031: insufficient privileges
  
  Enter user-name:

  Do you have any idea how I can change the password for the SYS user?

  his recommended Oracle when you go to change password use SYS

  orapwd file=password=entries=5 
  

• Try to set up im to store the LDAP user accessories

  I am running the script im/sbin/configure. I'm trying to configure im to store accessories user in ldap. Can someone tell me what bind dn, I would say. It will be all that is the default value. I don't know how to find it.

  Dn default binding is normally 'cn = Directory Manager'.

• Change of OS is a problem in the CCR user password!

  Hi Experts,
  
  IBM AIX 5.3 L OPERATING SYSTEM
  Database Oracle EE 10 G 10.1.0.4.0
  RAC and ASM
  
  There are two DB servers nodes 1 and 2. and there is a user of ABC (for example) on both nodes where Oracle S/W is installed.
  
  I connect on ABC user using putty as below:
  
  Node 1
  HostName: the IP address of the node 1 >
  Connect as: ABC
  
  [email protected] password: ABC
  
  And
  
  Node 2
  HostName: the IP address of the node 2 >
  Connect as: ABC
  
  [email protected] password: ABC
  
  Now I want to change the password of this user coz CBA is the password provided during the installation of oracle s/w.
  
  For security reasons I want to change it. Once it has been changed but CARS created some problems and so it is back to its original settings.
  
  Please suggest me the process and the name of the file where it is updated in the CARS.
  
  Best regards,

  Hello

  As we said before... I think you should change the password to participate in the security requirements.

  And then fix the problems if this happens.

  Can you tell us any problem affecting your RAC by password?

  See you soon,.

  Rodrigo Mufalani

• Column widths - problems of the interface user of Script

  Further, I realized that the method provided on page 28 of the beginning Script revision 1.9, January 2012, for the creation of a multi column list box does not apply as it does in the documentation.

  On the next page Peter provides a superior method for the creation of multi column list boxes.

  However what I would like to be able to do is create a multicolumn list, with predefined, column widths where the position of the separator column can still be set by the user. Is it possible to get this behavior? A scenario illustrating the problematic behavior is provided below and below which is a capture image the desired behavior.

  Still, any help on this is appreciated.

  var l is new window ('dialog', 'Tool', undefined, {});.

  Panel2 var = w.add ("panel");

  Panel2.Add ('statictext', undefined, ' results: ");

  var resultsListbox = w.add ("listbox", defined, undefined,

  ({numberOfColumns: 2, showHeaders: true, columnTitles: ['Document', 'Keyword'], columnWidths: [100,100,100]}) ;

  resultsListbox.minimumSize = [300 300]

  var myButtonGroup3 = panel2.add ('group');

  saveButton var = myButtonGroup3.add ('button', undefined, 'save');

  var search = myButtonGroup3.add ('button', undefined, 'Search');

  var exitButton = myButtonGroup3.add ("button", undefined, "Exit");

  w.Show ();

  

  Hello

  My sugest must include some items in a list (no items - no list)

  i.e.

  ....

  with (resultsListbox.add ("item", "1stDoc"))

  {

  Subitems [0] .text = "1stKey";

  }

  with (resultsListbox.add ("item", "2ndDoc"))

  {

  Subitems [0] .text = "2ndKey";

  }

  ...

  This should force the columns to display with adequate width, you define

  I hope that...

• Error message: Windows cannot access the specified device path and the second user cannot access the internet

  Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

  The second user cannot access the internet. Can't access window appears. The other user is not problems.

  Hi Rickravel,

  1. what type of account you use?

  2. This only happens when you access Internet?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  Step 1:

  You can start in safe mode with network and see if the problem occurs in the account.

  You can see the following link to start in safe mode with network.

  Start your computer in safe mode

  Note: Restart the computer to boot into normal mode.

  Step 2:

  If you use Internet explorer, then you can try to disable add ons and check if it helps:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

  How the modules of the browser affect my computer?

  Hope this information is useful.

• ALWAYS the end-user license agreement appears with invites to PRINT, ACCEPT or REFUSE them all products ALL MS Office are open - all MS products are ENABLED!

  I've just updated from XP Pro on WINDOWS 7 OS _ I reinstalled my MS Office 2003 product set and they were almost OK. My problem - ALWAYS the end-user license agreement appears with the prompt to PRINT, ACCEPT or DECLINE each time I try to use one of the MS office products is open. It's not a big deal, but it's annoying to get that invites each and everytime I open WORD, EXCEL, OUTLOOK, etc.

  What can I do to solve this problem.

  Thank you
  Bob

  Hi Carey.

  Thank you very much for your help. It works! Once again THANKS - Bob

• Configure vcenter to talk to the LDAP server

  Hello

  I recently installed the vcenter server and trying to understand it better.

  I have a Windows 2003 Active Directory installed in the same network.

  Is there a way where I can configure this announcement on the vcenter server so that users on the Server LDAP (Active Directory) can connect to the vcenter server.

  So, basically, I'm looking to see if the LDAP users can authenticate on the vCenter Server?

  Any help appreciated...

  Thank you.

  You check the authorization of default vCenter, you will see that there is only (local Administrators group).

  When you join the vCenter Server to a domain AD you can see also the domain user, and usually the Domain Admins group is added to the local Administrators group.

  André