Cannot use Authenticate in the configuration of the LDAP user

Similar Questions

• Cannot use ps on the second computer

  Cannot use ps on the second computer

  You are allowed to download and install the cloud creative on the second computer as long as you use only one at a time:

  FAQ: Can I install Creative Cloud on several computers?

  If you have some problems to install:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

  If you find errors or have another problem, please provide details.

• Question about deleting of the LDAP user and integration

  In the Document "Management Console Help", he States:
  
  "You can't invite accounts of users that are mastered in a user directory LDAP; These accounts are created automatically when you synchronize the LDAP directory. »
  
  This means that after you configure an LDAP domain, the users specified by the filter should be automatically attracted to OnTrack? I don't see the ldap users during execution of an empty search for the administration console. At this point, I can also connect to the OnTrack using a valid LDAP user. I was trying to see if OnTrack worked similar to the Complutense University of MADRID, where the OnTrack user account would create once the user logs in the application.
  
  What I can do, is go to "Create a user" and enter a valid ldap user's email address. then I see this user in the full search. This user can also connect successfully.
  
  I wanted to know what was the expected behavior: it should be a 'register' required ldap users in ontrack before auth in the app? Is there a synchronization process that must be executed to pull in the ldap users?
  
  Also, is it current best practices of removing users? I see in the administration console there is a note that says: "Note: removing users is not supported."
  
  As always, thanks for the info!
  
  
  Thank you
  -ryan
  
  Ryan Sullivan | ECMconsultant
  http://www.ecmconsultant.NET/
  

• Why my PC cannot use all of the available memory?

  Hello

  I have windows ultimate 64 bit and the 6 GB of ram (laptop)

  http://img03.arabsh.com/uploads/image/2012/09/19/0d36454a60fa0d.PNG

  As shown in the photo, there is a free memory and available memory

  Total: 6058
  caching: 2713
  available: 2552
  free: 1

  Why windows cannot use the available memory, although there is no such thing as free storage space!

  What you see is normal.

  Windows 7 do not free memory. He's trying to preload it with applications that she believes, based on experience, that you may need.

  If you have plenty of RAM, you can see more free memory if Windows doesn't find anything to him with preload.

  Available memory is not actively used by all processes memory but it is preloaded with applications, is of the opinion, based on experience, that you might need as I said above. If it is required by another process, it is available to be used and the preloaded data are deleted.

  I hope this helps you.

• Qosmio F55-Q502 cannot use GPS in the Viet Nam and Southeast Asia

  I have a Toshiba Qosmio F55 Q502 with purchase of system built-in GPS Garmin from the United States.
  But when I bring it to the Viet Nam and try to use the GPS, it does not work.

  I open Garmin Mobile PC, just Americans and Europeans of the cards.
  I try to activate the GPS, but the satellite always signal empty.

  I tried to go many places with view of clear skies but cound around ' nt captures the satellite signal.

  If this GPS is Globe Positioning system which means it can be used anywhere in the world.
  I do not know may be my GPS have the problem or the GPS is unusable in VietNam.

  My laptop just to buy a few days and I have not tried the GPS in US before.
  Can someone help me solve this problem?

  GPS should be worldwide.

  You can use a normal GPS for your car? Or as in the Nokia N95 GPS phone?

• VCS do not trust certificate - configuration of the LDAP user

  I have a cluster of 2 Telepresence VCS-control in the same network (vlan) and a bunch of 2 telepresence Expressway to same DMZ network (vlan). And both are on the same site. The two masters counterparts I managed to synchronize the servers against the ldap server (AD), but two of the slave with the same config for users/certificate/ldap settings fail. .  "DNS Uable to resolve the address of the LDAP server It seems to me that the peers do not trust the certificate.

  Newspapers that you attached are newspapers events and diagnostic logs not VCS. However according to these newspapers, it seems that VCS slave is not able to connect to the ldap server. If DNS resolution is probably ongoing, but the tcp/tls connection is not established.

  I recommend to make a journal of diagnosis (Maintenance > Diagnostics > diagnostic logging) everything by reproducing the connection failed to see what part of the connection fails.

  If you root for VCS slave access you may also connect as root via ssh and then run the following command:

  > tcpdump-port tcp s0

  Insert the port you use to connect to ldap in the field and then press ENTER. you will now see all the traffic to and from the port. Do you see some resets? Is traffic in one direction? This will help you understand why failure is implemented.

• cannot get rid of the database user name contains '

  Hi all
  
  I can't drop a database user name whose name looks like in ' MaryO'Connor "(without quotes) in 10.2.0.1.0 DB version, it fails and gives me a msg of error like:". "
  
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-00933: SQL not correctly completed command.
  ORA-06512: at line 7
  
  Can anyone give me some ideas how to get rid of this user to database whose name containing small caps or punctuation, etc. ?
  
  Notes,
  -J' connected in sysdba
  -the command I used to drop the user is:
  
  SQL > drop user cascade of "MaryO'Connor ';
  
  Thank you.

  As it is a bug in the internal database service (under the hood of the user drop command), it does not matter what gui you put forward to introduce orders.

• Get the LDAP user running a DBMS_JOB

  Hello!
  
  I am building an Application at the APEX 3.2 and the authentication scheme is a type of 'See the Page and use LDAP Directory IDs'.
  It all works very well.
  
  In this application, I give the possibility to download files and sometimes they are really big, so this download is executed by a job (DBMS_JOB. SUBMIT).
  Also works very well.
  
  My problem comes when I need to know what the user downloads the file!
  If I run it normally, not with a JOB, I can get the user using the package wwv_flow_custom_auth_std.get_username () and returns exactly what I want.
  But if I use this package inside employment it returns nothing.
  
  Is there a way to get the Apex user that triggered the work, when running it?
  
  I need this because I have a journal table, with the history of the records that have been updated / deleted and which update/remove the.
  
  Thank you
  
  Vania

  Vanya:

  You can do the following in the stored procedure

  Dbms_application_info package to set up "client_info" for the user name passed to the procedure

  dbms_application_info.set_client_info(p_user);
  

  The stored value can then be retrieved in the current session to help

  select sys_context('USERENV','CLIENT_INFO') into aud_user from dual;
  

  CITY

• Cannot use Internet on the VPN connection

  Hello

  I used a cisco customer version 4.0.3 installed on my laptop to connect to the VPN server.

  When my VPN client is connected to a remote VPN server via a wired LAN to my site office, I can't use the Internet at the same time. I have him this might not be possible unless "split tunnel" is allowed in the side server. When I connect to the server via the Wi - Fi network in the same office, I can use the Internet. It made me confused, so I checked the IP address of my network bridge by using the command 'ipconfig '. He showed the two IPS 10.100.128.1 and 10.100.128.2 for the wireless network connection and a single IP 10.69.225.70 for the wired network connection.

  How can you explin the situation of the two above? Two default gateways allowed me to use the Internet when my client is connected to the server through the network wi - Fi? The disable "split tunnel" function in the server VPN has blocked me form using the Internet, the connection to the server via the cable network? I don't think so. Why?

  When my client is connected to the VPN server over the network domestic Wi - Fi home that has only a single default gateway, 192.168.0.1. I have no problem with the use of the Internet. How can you explain this bizarre situation? I really want to use Internet through a wired network and wireless at the other site office who have only one gateway respectively. Could you explain that?

  Thank you very much... Jae

  You are welcome, I hope we can fix it all.

  ComboFix set malware entries that could corrupt your browser for a malfunction. WinSockFix to fix corruptions that may have caused by the VPN software. But I'm not a type of corruption is likely to not do not work and https http to work.

  Now, let me understand the current issue. You cannot connect to the internet even the VPN is disconnected correct?

  I have a few questions and need of some outputs of diagnosis

  (1) I think that you are in a hotel. Using wireless? Can it be quota restrictions by the hotel management?

  2) connect via VPN. You have established the connection, my neighbors network at the office with the right button > properties. Now, right-click of Cisco VPN Adapter, and then click on repair. And then disconnect your VPN client

  (3) once you disconnect a VPN, do the repair, even for your Local network connection or a wireless connection. The VPN is disconnected, run the following in the command line

  Nslookup

  www.Google.com

  then run

  tracert 64.156.132.140

  then run

  impression of the route

  And after the output of these commands here.

• Satellite M30: Cannot use COM with the Modem port

  Hello

  I have a satellite m30. I have problems with the com port to use with the modem. I get an error code saying 12 resources etc. There is no i/o or IRQ conflict IRQ 04 and e/s beach is 03F8 - 03FF. I tried to uninstall various things to free resources, but still the same error.

  Any help would be greatly appreciated.

  This problem when you use the Toshiba Recovery CD?
  Try to disconnect all the external devices and install Windows from the Toshiba restore CD.

  Additional please check several comments here in the forum area Modem. I found several threads with similar issues

• Satellite A200 - cannot use Vista after the recovery of the product

  Hello. I hope someone can help me with the following... This week I had various issues with which follows my laptop a Vista update that system restore did not fix, so I decided to go for a full recovery of product (which I have a complete backup of all my files).

  So far I have used the product recovery on my laptop in the 3 ways I can see (and more than once): without changing the settings, change the settings and maximize the partition, change settings and select advance / expertise.

  Whenever I was able to complete the initialization of windows, create a new user account, etc. Once the Office has been set up, I get a small window with a progress bar and when it's over, I click on the button 'restart '...

  After the reboot, I get the black screen that says Microsoft Corporation with the green progress bar, but he's there for what feels like 'too long '. After a while, I get a black screen with a cursor, then a blue screen for a crash dump.

  If I use F8 and boot mode safe, the system stops the CplIR.sys file, although the hard disk activity seems to be continuing. I turn off after 10 minutes.

  If I use F8 and then select Repair computer... This is what is happening with each option
  -Restore the full windows operating system: after clicking on OK nothing happens.
  -Diagnostics of memory: there is no problem with memory
  -DOS prompt: I run CHKDSK and there is no problem with the hard drive
  -Restart: there is no errors, even if the word diagnosis 'impossible' when he sees, there is no system restore points

  Then on reboot I get the black screen with cursor followed by the crashdump OR if I managed to log in and access my desktop, I get the crash dump, as soon as I try to do something (like open Control Panel).

  Following the instructions found elsewhere, I have tried this after removing the battery, then changing power management options immediately after the initialization of windows (ie. before clicking on the restart button). No change.

  I even ignored the button restart! But still get a crash dump, when I try to do something.

  Any ideas? I've got past (ie. wasted) so a lot of time on this and don't understand what may be wrong after formatting the windows drive image and reloading...

  Hello

  It's very interesting story. I got several notebooks several times but I never noticed anything like that.
  I must say that what you did right and you think appropriately. If I were you I would try exactly the same steps to make it work somehow.
  I do not know which issues you had before, but I imagine that here it's just the problems of software and not important for the operation of the equipment.

  It's really hard to say what can be the problem. What you can try, is somewhere to get facilities Microsoft Vista disk and install naked Vista to see if the same thing will happen again.
  Anyway, the fact is that images of recovery are tested and adapted for each laptop model and if the material is OK there no reason for this kind of behavior.

  Try again with the new installation using Microsoft facilities drive and let us know exactly what is happening.

• Satellite L500-19Z - cannot use WLan because the driver has been removed

  I accidentally uninstalled REALTEK WLAN driver and now I can't use the wireless installation.
  I tried to use system restore to recover before the uninstall, but the system restore won't restore (tells me that anti-virus prevents it probably, but I stopped my loading anti-virus, so this isn't the problem).

  I then allowed Windows 7 to find the material and it re-installed the driver, but I still can't use WLAN.
  Anyone got advice to help me get out of the mess I made for myself?

  Hello

  To my knowledge, this laptop supports the Realtek RTL8191SE WLan card 802.11bgn.
  You can find the Wlan driver here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  I think that it shouldn't be a big problem to get this working again ;)

  Good bye

• Cannot use iTunes on the iMac to sync apps for iPhone

  I can relocate (from the screen to the other), install, and remove icons on my iPad via iTunes. I use the left side of the screen "App" for that section. However, I can't do it all on my iPhone 6. In addition, the IOS app icon is now absent on iPhone. Thank you for your help.

  Try a reset. Turn off your iPhone and reset by holding down the sleep/wake button and the Home set button until the Apple logo appears.  You won't lose anything.

• Cannot use Select inside the loop For inside the SCTL (FPGA) - Bug? An alternative?

  When I put a Select statement inside a loop in a loop of Timed Cycle in LabVIEW FPGA, I get the following error when I try to compile:

  "An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

  Error-61003 occurred at

  Possible reasons:

  LabVIEW FPGA: you cannot include this function in a loop For when the loop is within a single cycle timed loop. »

  I didn't know that whatever it is documented that says that this is not allowed; is this a bug or am I missing some documents?

  The code that causes this error looks like this, inside a SCTL (ignore Boolean wire wandering behind the loop for)

  

  I came up with the code below instead, which compiles into one Cycle timed loop, but it is a bit ugly. Does anyone have a better suggestion?

  

  This issue is currently followed under the CAR # 592391. Please keep an eye on our patches and new versions as usual!

• Cannot use Windows Update, the OX800A0046 error code.

  TRING TO CHECK UPDATES IN WINDOWS UPDATE AND I KEP GETTING 0X800A0046 ERROR. TRIED TO CHANGE USERDATA PERSISTENCE AS HE SAID, BUT WAS ALREADY AT THE CORRECT SETTING. AM I MISSING SOMETHING?

  original title: can NOT USE WINDOWS UPDATE ERROR OX800A0046, TRIED to CHANGE the USERDATA PERSISTENCE, NO HELP

  Have you tried the solutions here:

  "Error message when you visit the Windows Update Web site or the Microsoft Update Web site:"0x800A0046"
    <>http://support.Microsoft.com/kb/910338 >

  The "Userdata persistence" is step 6 6.  Have you tried the steps above?

  HTH,
  JW