try to sync the music on my SD card box appears and asks if I want to format the device I click on the box to format, then he said: he can't format my device

Similar Questions

• Card SD not recognized and asks if I want to format it, but is not able to

  I have a micro sd card which has been formatted on my pc and that you place in my phone.  for some reason any, that my phone no longer recognizes my card and every time I turn on the phone it asks me if I want to format the card.  If I format the card, or no, it is not recognized by my phone... so I turned to my pc once more.  When I put the card into my card reader, I get a message that my card needs to be formatted.  When I click ok, I get an error message that windows is unable to format my drive... I use windows 7 ultimate.  Thank you

  Hi Leon Szczerbinski,
   
  I suggest to format using disk management and check if the problem persists. To do this follow the steps below:

  Step 1:
  1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in the Navigation pane, under storage, click Disk Management.
  3. right click on the volume that you want to format and then click on format.
  4. to format the volume with the default settings, in the dialog box format, click OK, and then click OK again.

  See the link below talking to create and format a hard disk partition
  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  Step 2: 1. Here you go to the computer by clicking the Start button.
  2. right click on the SD card.
  3. Select Properties.
  4. click on format.
  5 and follow the wizard that will guide you in the steps.
   
  A good rule is to try to rename the map in the format so that it will be recognized as a new device.

  After formating the card try to place the card in the phone and check if the problem persists.
   
  If the problem persists, you must contact the manufacturer of your hardware or card to replace it with the new card.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• I try to sync a new phone 6 s with tunes11.4 and receive an error message saying that the phone unusable because it requires a more recent version of the air.  can anyone help?

  I try to sync a new phone 6 s with tunes11.4 and receive an error message saying that the phone cannot be used because it requires a newer version of itunes.  I've updated the phone and itunes.  can anyone help?

  Sorry, iphone and itunes.

• When iam on facebook, I try to play the game it says it loads but I can't play

  When iam on facebook, I try to play the game it says it loads but I can't play

  Hello

  1. what browser do you use to play games online?

  2. the problem occurs only with Facebook games or any other game online?

  3 have there been any changes to the system until the problem occurred?

  4. What is the exact message displayed when the problem occurred?

  Please follow the steps in the Web site if you use Internet Explorer as default browser to play online games.

  http://support.Microsoft.com/kb/2528246

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  I hope this helps.

• When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

  original title:

  When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: System Restore tutorialtutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• When I try to change the interactive report columns, then triggers the error: "unable to change column attributes. "ORA-01403: no data found. Pls tell me why?

  When I try to change the interactive report columns, then triggers the error: "unable to change column attributes. "ORA-01403: no data found. Pls tell me why?

  You use listener EA3 ADR?

• Hi, I just bought a used 2012 Pro 13 "Macbook. It came with iMovie installed. However, I would like to get the update to iMovie. He said: I can't update iMovie because a different Apple ID was used to download iMovie and I get errors. How can I update iMo

  Hi, I just bought a used 2012 Pro 13 "Macbook. It came with iMovie installed. However, I would like to get the update to iMovie. He said: I can't update iMovie because a different Apple ID was used to download iMovie and I get errors. How can I update iMovie?

  Error message #1: these applications cannot be accepted by your Apple ID. These applications have already been assigned to another Apple ID, and they will be available in this list of purchases Apple ID. If you don't have access to this Apple ID and would like to receive future updates, you will need to purchase applications.

  Error message #2: update are not available with this Apple ID. This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled.

  Error message #3: we could not complete your request. There was an error in the App Store. Please try again later. (null)

  Unfortunately, free updates are available to the original purchaser of the computer. The iMovie is locked to his Apple ID, so unless you have to grab his ID, you can buy iMovie.

• Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal.

  Failed to open all files with the extension .exe in Vista Business SP2.  Dialog box appears and asks which program to use.  Seems to have lost the info file assoc after virus removal.  Any suggestions?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Try the fix it or follow the manual for troubleshooting to solve the problem.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note:

  The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Method 2:

  Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• I can not open a new tab (empty) I change all the settings. However as I said well can I open a new tab with a link without a link, I can't open a new (empty) tab.

  I can not open a new tab (empty) I change all the settings. However as I said well can I open a new tab with a link without a link, I can't open a new (empty) tab.

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Try to sync the music on my ipod

  Hi, I have never music sync-ed to my ipod before... always someone else to do for me.  It turns out to be more complicated than I expected.  When to sync options, my mon appareil device does not connect to the way its supposed to.

  How can I connect my device?

  Music on iphone ot ipod synchronization
  http://support.Apple.com/kb/HT1351

  t-4-2

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• When I try to download, the implementation is downloaded, then when I run it, it says extract and then I click on install. After this installation is not completed?

  I had to uninstall firefox because it won't change the settings according to my needs. to start it won't set the homepage of google. so I read on the internet that some files block so I uninstall firefox and install again. now when I try to install, the establishment is downloaded, and then when I run it, it says: extraction. After that when I click on install, it says "one moment, firefox will start as soon as the installation is complete. but the bar above which shows how much % of download is complete, it has not yet started. I waited 1 hour so he can complete the installation, but it is not moving forward. can someone please help?
  Info: I have windows 7

  Try to download the full pack instead of the Stub version (compressed)

  • http://www.Mozilla.org/en-us/Firefox/all/

  If you are on Windows Vista/7/8, try the installer of the right click and click on run as administrator

• Error when you try to download the windows media player security upgrade so I can use overdrive

  I have windows 7 and am trying to download the upgrade of security, so I use overdrive to download books audio wma. I tried the link in overdrive and direct download but it will not be installed.

  Hello

  1. you try to install the upgrade by using Windows or Windows Media player updates?

  2 did you change on your computer before the show?

  Follow the steps below:

  Method 1: Perform the clean boot and check if you are able to install the upgrade.

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  Scan of the SFC

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

  For reference:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

• Asian locale?  Installed Acrobat XI for Windows, but when I try to run the program, it happens in some Asian locales - can not read anything!

  Hello

  I am setting up a new laptop and downloaded Acrobat Pro XI for Windows computer.  Download and install seemed to go fine, but when I try to run the program, it is coming in a few other locales (not French_FR).  What should I do to configure the program for the locale in the United States?

  (running Setup 3 times (to fix, modify, uninstall/reinstall), but so far nothing has worked.)  Even after uninstalling/reinstalling (where I deselected the local Korean), the program still continues to flow upwards in an alternate reality!

  Help, please!

  Thank you

  -fastkeysx

  Hi Vicki,

  Have you tried toggling this setting under Edit > Preferences:

  

  Kind regards

  Rave

• I recently had to reinstall AA11. Eversince, that announcement when I try to open a pdf do, a menu drop-down window appears and asks me to give the serial number. When I give him, the message appears as "the serial number you provided is valid, but callin

  I have recently re-intall my AA 11 Pro. Since then, as and when I try to open any pdf doc, a drop down message comes from asking me to confirm the serial number. And when I gave him, a message appears "serial number you provided is valid, but calling it a product could not be found. The problem is that AA 11 Pro is not given as one of the options in the window. Nayar NM

  I gave you the answer... Enter the serial number of your PREVIOUS version when asked for a product calling