Try to upgrade the browser, but I am informed that I'll lose my apps Entourage and Word, when I come to the installation point.
I got to many notifications that the browser on my IMac OS 10.6.8 is no longer supported. I chose to move to ElCapitan, and after the download, I was informed that before install, I'd lose my Email of Entourage and my Word applications. I want to keep those. Is there some other updates that will allow me to keep?
Your browser can only be improved by the OS X update to El Capitan. You won't lose any applications, but you will need to upgrade to ensure compatibility. Office 2011 works, but is no longer available the MS Office 2016 is available as a subscription $99 / year. The apps are downloadable for free. There is no Entourage. You should now use Outlook.
Tags: Mac OS & System Software
Similar Questions
-
When I did research on the way and that this function would I found no data lost three of my most used APPS? When I did the reset I don't have access to a computer and there is no way to verify even how to recover them without internet capabilities! How do I find/download again?
Post edited by: cd.wilkins
Reset does not delete the preinstalled applications. There is no way to remove it.
-
Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it. In settings/applications & iTunes the correct ID is set but not in the settings/iCloud
Is this a separate id, or you have successfully updated the primary e-mail address on the account? You can disconnect an account iCloud through settings > iCloud > Sign Out, and then log back from the other/updated id to update
If you have updated the main email address: what to do when you have changed your Apple ID email address or password - Apple support
-
I just download Adobe Creative cloud and all the so-called applications 'try' instead of the installation. I bought all the applications so why it only gives me an option 'try '?
-
Try to install 9 Captivate. Mac has been extremely slow, so I had to stop and restart early in the installation process. When I try to open the installation program again, it reads "Setup Failed To Initialize. Please download Adobe Support Advisor to detect the problem. "But there is no longer the support Counsellor. How to solve this?
Go to Adobe Captivate
-
Original title: how to find missing or corrupt files on windows xp pro
I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files? My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it
Hello
1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
2 are you able to install any other software?Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.
Step 1: Try to install the webcam software in clean boot state and check.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
I just bought Creative cloud and can't install photoshop, the other says apps try instead of the installation?
Hello
Please see the instructions at the link below:
Connect and disconnect activate Cloud Creative applications
Applications creative Cloud back in test mode after an update until 2015 for CC
Activation and deactivation of troubleshooting
Creating cloud connection errors
If the links above does not help you, please visit Creative cloud showing the evaluation mode
Let us know if that helps.
Kind regards
Bani
-
When I try to install Adobe Creative Cloud stops, stops at halfway of the installation point and closes. (The download is also very slow) can someone help me please? Thank you!
Please, try the following steps:
- Uninstall Adobe CC (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)
- Reboot the computer.
- Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop
Guinot
-
Try to download the installer of CreativeCloud, I get the error code 213. How can I fix this so I can download Adobe Pro XI?
Hi Lynn,
You I'd like to try to re-run the download with your anti-virus software disabled using a newly created Admin account.
-Dave
-
Installation of 11 items was interrupted, now when I try to use the installer, he wants to "uninstall" it's the right thing to do to allow a correct installation later?
Quite please complete the process of uninstalling and then reinstalling it again.
-
I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode. Startup Repair is unable to repair. She argues that the onus of a BadPatch.
Startup Repair shows the following:
Problem event name: StartupRepairV2
Signature of the problem 01: external Media
Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
03:6 problem signature
Signature of the 04:262148 problem
Signature of the problem 05: BadPatch
Signature of the 06 problem: BadPatch
Signature of the problem 07:0
Signature of issue 08: 1
Signature of the problem 09: SystemRestore
Signature of the problem 10:0
OS version: 6.0.6000.2.0.0.256.1
Locale ID: 1033Hello
I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
not tighten, effectively remove and replace them with care.Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.
By manufacturer diagnostic utilities
http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
SpeedFan
http://www.almico.com/sfdownload.phpHD Tune
http://www.hdtune.com/----------------------------------------------
If necessary:
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlNo new chances.
Rob - bicycle - Mark Twain said it is good. -
Certificate error when you try to upgrade the server vcenter 5.1 to 6.0
This machine is joined to a domain.
lookup for the ip address exists and points to the correct FULL - the same domain name which is another property on C:\ProgramData\VMware\VMware VirtualCenter\SSL\rui.crt "another name for the Sebject."
How 'using an ip or dns which is present address... '. ». How can I tell the installation wizard to use the domain name FULL and not 10.13.5.41?
Thank you
relevant?
-
* Original title: drivers Canon MP160 printer (scanner-MP navigator) on issues of Win8
Hello
I bought a win8 system. I tried to install the Canon MP160 driver on the system.
Had trouble at the start, but was able to install in compatibility mode for win 7, which solved the problem of the printer.
Now I have problems with the installation of MP Navigator to scan.
I am able to install MP Navigator but receive error message "scanner driver supported by this software is not installed.» Install it and then try again."
Help, please.
Pavan Sandur
Hi Pavan,
Thank you for the information.
You can uninstall the drivers from Device Manager and try to install the latest versions to check the issue.
If the problem persists, try to install the software of the browser in compatibility mode and see if that fixes the problem.
http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows
You can also get in touch with the Canon Support for assistance on their products and compatibility.
http://www.Canon.ca/inetCA/contactus?m=loadcontactus&lang=en&commId=3&typeid=1&msegid=2
It will be useful.
-
I have reset my phone several times and I tried withou using wifi, but nothing works. Stuck on loading or sometimes the app takes over for a second and 'get' returns everything straight up.
Try to reset the app store opening and clicking on one of the icons in the bottom about 10 - 12 times - so Favorites or search (one)
If this does not work
Try a forced reboot - after open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.
Meet the sleep/wake and home buttons down until you see the logo - then release and allow normal start upward
If this does not work
Settings - reset - Reset all settings
-
I recently bought an iMac. I use the LR6 on my Macbook Pro (which crashed due to their problem of solder on the graphics card). I got the Macbook repaired, but I have an iMac to replace for the photo and video editing. So how moves we LR6 from my laptop on the desk, when it was an upgrade online?
He will be in an email that you received from Adobe and your Adobe once account that you log in using the same e-mail address and the password that allows you to create Adobe ID and buy LR 6.
Maybe you are looking for
-
Chicony webcam - how to remove from the system?
Thank you!
-
Problem of earn 8.1 Dolby Theater
I have Acer V3 - 571G, windows 7 drivers are old, but ok, all work. I buy today and intalled Win Pro 8.1, downloaded the latest drivers Acer, but the Dolby Home Theater do not work... Who are the people who have this problem, but no one don't request
-
Want to get information about the coinlog.log text document
Original title: coinlog.log text document Hello In Vista C: / Windows/temp - I noticed the text "coinlog.log" document, which contains in part something "destroyprivatedata". Nobody knows what this text is about; for example the malware? See you soon
-
What time and where is it?
I'm learning Spanish and when I'm at the interactive point where can practice you the pronunciation of feedback the program flashes a message that says that you have to install Quik Time. I have been all over Windows and can not find the prothrombin
-
My Windows 7 will not recognize my HP 1210 printer
I am trying to install my printer HP 1210 all-in-one on my Windows 7 PC. It worked well on my XP PC. When I insert the disc printer through the whole until it reaches the part where plug you in the USB from the printer. At this point, the window is g