Try to upgrade to windows 7 and impossible because of Kaspersky

Similar Questions

• I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

  I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Something was wrong. "Close this wizard and try again" when you try to upgrade to Windows 8 Media center package.

  Separated from this thread.

  I tried both of them, didn't work... very angry about windows

  Hello Kuang,

  Thank you for writing back to us. I can understand that it might get frustrating if the computer does not work as expected.

  I checked online and found potential fix for this problem is to refresh the computer, and then try to upgrade to Windows 8 Media Center package.

  Refresh your PC reinstall Windows and keep your personal files and settings. Refresh your PC reinstall Windows and keep your personal files and settings.

  Note:

  Applications that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC. It is recommended that you back up all the important files on an external drive before performing the update.

  Please click on the link provided below for more information on how to perform the update.

  How to refresh, reset or restore your PC

  To add features like the pack Pro or Media Center to Windows 8/8.1, please see the link below.

  http://Windows.Microsoft.com/en-GB/Windows-8/feature-packs

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

• ooxcoooo142 when you try to upgrade to windows 7

  I am trying to upgrade to Windows 7 and I get to a point that he wants to restart and I get the error code (00xc0000142) and I have to which close?

  If anyone can help. I am running Windows Vista and I also get a (winrscmde) stopped working and an error (FFFFFFFE) when you try to update

  installs? Help...

  Hello

  Do the following before you start:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• 80070652 error code when you try to upgrade to windows 10 Windows 7.

  * Original title: windows update error code

  80070652 error code when you try to upgrade to windows 10 Windows 7

  0 x 80070652

  ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress

  If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

  You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

  Connect to a power supply, if your computer is a portable computer.

  Disable your anti-virus software so that the upgrade.

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• error code 800703f1 when you try to upgrade to Windows 10

  When you try to upgrade to windows 7 ultimate 64 for windows 10 I keep getting the error code 800703f1. All updates previously - installed running Symantec anti virus 360 - search for malware and viruses and none found

  How to get around this error for install windows 10

  Original title: Mr.

  I had a problem with the startup configuration file - fixed which and was able to upgrade

• Try to upgrade to Windows Windows 7 problem 10 of "Windows Update restart."

  Hello community,

  I have a pretty annoying problem with trying to upgrade to windows 10 and windows update.

  I reserved my copy for Windows 10 and on some occasions, it prompted me to start the upgrade. Then it returns me to my Windows Update program and the message reads.

  Restart your computer to install important updates

  Windows cannot update services and important files while the system uses them. Save all the files and restart the computer, and then try to check for the updates.

  Restart the PC does nothing and the same message applies.

  I tried to stop the update of Windows and the BITS service and the deleted software distribution folder, and then by restarting the services. Which does nothing and I'm back to the same situation.

  Any ideas? I am tech savvy but not extremely.

  Declan

  Please remove Advanced System Care. Select the hotkey Windows key + R, type Appwiz.cpl and press ENTER . Place the cursor on Advanced System Care, right click and select Uninstall from the menu drop down. Restart your computer.

  Select Start, all programs, accessories, right-click right-click command prompt and click run as administrator on the menu drop-down... Type cd\ and press ENTER.
  Type net stop wuauserv , then press the ENTER key
  Type net stop cryptSvc and press the ENTER key
  Type net stop bits , then press the ENTER key
  Type net stop msiserver , then press the ENTER key
  Type ren C:\Windows\SoftwareDistribution SoftwareDistribution.old , and then press the ENTER key
  Type ren C:\Windows\System32\catroot2 Catroot2.old and press the ENTER key
  Type net start wuauserv , and then press the ENTER key
  Type net start cryptSvc , and then press the ENTER key
  Type net start bits , and then press the ENTER key
  Type net start msiserver , and then press the ENTER key
  Type exit , and then press the ENTER key

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please restart your computer, wait 30 minutes for the system to operate before downloading more information so that the impact of the changes can become apparent.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

• Upgrade to Windows 10 and how might this affect files.

  Is it necessary to make a backup of files music, photo and video etc before you try to upgrade to Windows 10, or installation work around them and leave them intact so that they are accessible once the installation is complete, please?

  Hi Wayne.

  Make a backup! The upgrade should not affect but best to be sure... etc. IT is simply recommended to have a back up when even (I have two external drives usb and cloud storage). Some documents and photos may be gone for good, if you lose!  -Cheers. Ric.

• Upgrade to Windows 7 and would like to know if all my tablet/pen functions still work?

  Original title: Windows7 and Tablet PC

  I have a Gateway Tablet PC.  He who is like a laptop, not these new without a keyboard.  For some reason, she has two model numbers: TA1.0 and M280E.  At the moment it has Windows XP (gateway) Tablet PC edition 2005 Version 2002 Service Pack 3 on it.  It has a processor Intel Pentium M 1.73GHz, 1,999 GB of RAM or processor if you look in the BIOS, 2048 MB of RAM.  I think it's the RAM Max will take this particular PC.  The processor is scalable?  I know that I have contributed to a maximum of one of my doors from the other monitor has collapsed on me one day and is unusable, so I think this is one.  The ugly manual, I downloaded did not about the Max RAM, a Fujitsu 37.2 GB HD and a CD - RW Optiarc.

  Because Windows XP is longer supported, no. updates (although I find it odd that a pop-up saying updates are ready for your computer is fun) and for some reason it will run is more than some previous programs I ran over it, such as MSE and Windows Media Player 11, and I don't know I'll find others.

  The important question is: I want to upgrade to Windows 7 and would like to know if all my tablet/pen functions still work, since it's the main reason I want to use?  And of course running WinXP is a safety hazard as well.

  I use my ASUS X54C now and you want to reset to factory settings and reformat the HD, so I want a computer to use while I'm this, as well as using his pen to create a clip art image and also many other things.  Is there anything else I should know?

  The first thing to do is to check the support web site of the gateway to see if there are drivers for devices on Windows 7 for your model. If there is no record of specific device in Windows 7 listed then you will not be able to run Windows 7 correctly, or it may not work at all.

  Gateway driver support web site: http://us.gateway.com/gw/en/US/content/drivers-downloads

  Note: There is an "Auto Detect" option that can help you determine the right model you have.

  M280 using as a guide I tried to see what is available and found only XP / Vista and Windows 2000 drivers, so you may be out of luck, but try to auto detect and see if you have Windows 7 drivers listed.

  J W Stuart: http://www.pagestart.com

• HP Pavilion entertainment laptop upgraded to windows 7 and webcam is longer.

  Laptop computer HP9925nr has been upgraded to Windows 7 and the Webcam is no longer find. Is disabled over Webcam because it is not compatiable with Windows 7? I updated the driver from the website, but says that the Webcam is not found.

  Try to install the driver from the following link:

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45825.exe

  If the problem persists, consult the document below for more troubleshooting:

  http://support.HP.com/us-en/document/c02452221

• I have recently upgraded to Windows 10 and it will activate Acrobat 8.1

  I have recently upgraded to Windows 10 and now when I try to run my Acrobat 8.1 he said reactivation is necessary and automatic reactivation does not work.  Can someone telll me why this happened and how can I run my Acrobat 8.1.  I really don't want to go because it has worked well for me.

  Hi Paul,.

  Acrobat 8 is not compatible with windows 10. I would recommend you to upgrade to Acrobat DC - Plans and price | Adobe Acrobat DC

  However, if you continue to try and activate it, you can try Activation offline

  Kind regards

  Rahul

• Upgraded to windows 7 and also a new hard drive

  I have a 2005 HP m7060n Media Center http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00306958 & lang = to & cc = us & taskI... running on XP
  I was looking to upgrade to Windows 7 and also install a new drive.  New readers are shipped with windows 7 already preinstalled and when I change the disks, it will start windows 7.
  How could I then exchange the old files to the new drive?
  What is your solution the best and less expensive?  How do you do this?  Help, please.
  Thank you
  Marco

  I suggest that perform you a clone of the hard drive. Seagate drives and WD offer a free version of the wizard disk.

  Clone the original 200 GB drive to the new drive.  To avoid problems, has chosen a 1.5 or 1 t T drive. Once you have the clone, just install the upgrade on the new drive. All your data will remain intact, and the intact original of 200 GB drive is secure.

  PS > you need a spare sata power and data leads to the clone. Look inside and see what led power is hanging loose. Then I can suggest an adapter or cable. As the DVD is IDE, (not Sata) from what I've read, you will need a Sata data cable also.

• Want a Smart Touch 23-065: I've upgraded to Windows 10 and now my bluetooth devices do not work

  I have a Smart Touch 23-065 envy that I have upgraded to Windows 10 and now my bluetooth devices do not work. They are detected, but not pair

  OK, line background peripheral bluetooth is not supported until the vendor provides a Windows 10 driver which is not yet and my never be available. Suppose if I want to use bluetooth, I'll have to get a usb adapter

• Folio 13-2000: Folio 13 - upgrading to Windows 10 and USB Hub 3 driver error

  I just upgraded to Windows 10 and found a USB port (left side) does not not and verify that there is a driver for Fresco Logic USB 3.0 error root hub error friv. Previously the USB port works well when he was Win7. Updates driver or the driver who needs to re - install?

  Broadcast

  Please first install the Intel® Chipset Device Software setupchipset.exe

  Reset

  Read the page

• IM using Windows XP Profesional, can I upgrade to Windows 7 and what would be the cost?

  upgrade windows xp to windows 7

  IM using windows xp profesional can I upgrade to windows 7 and what would be the cost? what I have to put all my files on an external drive then uninstall windows xp then put in windows 7 then put back my files? is that how its done? Thank you.

  First the cost, you must know if your hardware can support Windows 7

  In General win 7 should a minimum og 1 gig of ram (for 32 bit) or 2 for 64-bit, and it needs a video card 256 MB or greater.

  If your less and can not be updated it may be best to start thinking about a new computer.

  If the above is ok there are various offers for win 8, but make sure you buy form a reliable site of Ms.  There are a lot of current scams.

  Good luck